Hello I've got and Alrikfra missing and tried irreversible ways Alaudin and applied
Information and connect two Alaudin but tell me FAIL ČÓ heck with brief setup connection and Create file Mahve uncle have Atansb correct way or not, please help me To download under the yellow label 113 and not getting Shi and separated Alaudin and operate the device shows me firmware upgrade encountered an issue pleease select recovery mode in kies try again Knowing two Galaxy W i8150:crying::crying::crying::crying:
70 View MACON Re Help
Related
helo all
please help me about my o2xda2i, it stucked on bootloader just show the connection seril version 1.1 when i attache the usb it shows usb version 1.1 noting els
please tell me how can i bring my windows back
thanks
Search for the tool named "mtty".
For DOPOD900: execute "s 14 0" to clear the register which keeps the info of whether booting into bootloader.
better download a suitable ROM from FTP and reflash yr device
I need help desperately. When I turn my phone on - it shows a tri-colored (Red-green-blue)screen (with small white at the bottom)
My phone was working just fine - but when I turned it on yesterday - it showed this wierd screen. In the top right corner, it says: RUU
In the red section it reads: IPL 2.26 & below that it reads: SPL 2.26
When I try syncing it - the computer does not recognize it. What can I do? I've looked at the site and searched for a solution. I stayed up almost all night trying to fix it, using MTTY (but no response from the phone). The only thing it does is show USB, when I plug it into the computer.
Other than that - nothing happens. I'm very exasperated. Can someone help me out?
Thanks
Have you first of all tried hard resetting the device?
If you have to no avail then the fact that your PC can still establish a USB connection with your device (Hence USB displayed in the bottom left of your device's screen)means you should be able to download the latest MDA rom update from the T-Mobile site and re-flash your device to get it back on it's feet. There is plenty of advice on the boards on how to re-flash and it is quite straight forward with the original signed ROM's (no unlocking required)
I hope this helps you in some way and if anyone can provide a link to the download needed please chime in.
C.
Did you try flashing a new ROM recently? A failed flash can cause that to happen. If not, download T-Mobiles ROM and reflash it and it should go back to normal. Unfortunately that means you'll lose any info that you had on there so hopefully you have it backed up. Before you do that though, make sure it's not doing that because you're accidentally pushing the camera button in while your rebooting your phone. I can see where that would happen accidentally because I'm constantly looking down at my phone only to notice the cameras activated because I accidentally hit that button.
Thanks a lot. I'll give it a try and see what happens
I can't get activesync to connect w/my device! Everytime I try - no luck. I've tried the MTTY and still nothing. Can anyone suggest a way for me to use? When I connect the MDA to the computer - it registers in my device manager, but Active sync won't identify it??!???
You do not need to be connected to active sync (if you're in bootloader mode) to flash an original signed ROM. Just connect you device to the PC, If your device has the tri-colour bootloader screen with USB listed in the bottom left hand corner of the screen (like you said in your first post) you should be able to reflash. Just run the Installer that you have download from the T-mobile website and it should perform the reflash. Forget about active sync for the moment until you get your device up and running again. It really is quite a simple operation. If this does not work for you, you're device might have a genuine fault. I feel confident it should work though as i have been in this situation myself with the MDA-Vario.
P.S What type of device do you have and which country are you in? This may enable me to help you a little more in finding the correct ROM if you don't already have it.
Do let us know how you get on
Cheers
C.
I have the MDA and I live in the USA
thanks for all of your help. I'm still trying - but nothing seems to be working
Did you download the T-Mobile ROM from their site and try to reflash it? If you did, what happens when you run the update exe?
Don't worry about not connecting to activesync right now, if you're in bootloader mode it wont connect.
Here is a link to the T-mobile MDA (USA) Get Software page. you'll have to enter your phone number to get the software you need. Its a big download (Approx 50MB) so be patient. There are also instructions on how to perform the upgrade there.
Good Luck and let us know.
C.
http://www.t-mobile.com/wmupgrade/
Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.
[email protected] said:
Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.
Click to expand...
Click to collapse
I really confused about your description? you using twrp to flash a .zip rom? then you mentioned about .md5 rom on your pc? how did you flash? With .md5 rom you need to use Odin to flash. Can you boot into download mode (hold down volume down + Home buttons then press power button)? If you able to boot to download mode, your pc should able to see the device and you would use Odin to flash the .md5 rom from your pc to the device. Also where did you download the .zip rom?
Hi dear gringa colleagues, I'm Brazilian and I need everyone's help here.
I have a Galaxy m30 cell phone that forgot its default password, that's when the problem starts, I've tried to do the Rard reset, but it doesn't accept reset, I've done all the key games, nothing else to enter the download mode, I've done everything I used the adb commands more of the closed error
I was thinking of putting the rom through the memory card, I don't know if it will work
please help me my cell does not have root access
help please dear grincos
When attempting to root, install a custom ROM, or even install the original firmware, you may encounter issues that are caused by a broken cord, a dead computer, or when the firmware you installed is corrupted or you have the incorrect version installed. However, covering all error messages in a single article is difficult. As a result, we're focusing solely on "An error occurred when updating the device software." Samsung Galaxy Smartphones exhibit this error. It happened to me on a Samsung Galaxy Note 10 Plus with One UI and Android 10, Android 11, and Android 12 firmware.
We have two options for fixing this: official and unofficial. The latter is suggested.
Unofficial Method
Using Frp HiJacker by Hagard
In this method, we will be using the unofficial application “Frp HiJacker by Hagard“.
1. First you need to download the application from this link.
2. Once downloaded please extract the zip archive and you will get a “.exe” file. Double click on it to install.
3. In the second installation window you will be asked to enter the password. Now enter “www.gsmhagard.com” as the password and complete the installation.
4. Once done connect your Samsung Galaxy Smartphone with your PC and open the “Frp HiJacker by Hagard” application.
Now if the box near “Port” is empty then please click the “Scan” button. Once done your phone will be detected by the application.
Else type your model number.
However, if the box is already filled automatically you are good to proceed.
5. Now select “Soft Brick Fixer” and click the “HIJACK IT!” button.
That’s it your Galaxy Smartphone will reboot and the error will be gone for good.
Official Method
This method uses the official Samsung “Smart Switch” PC application.
1. First please download and install the Smart Switch application on your Windows PC from this link and for MAC OS here.
2. Now open Smart Switch If your device is connected you will get the phone model on this screen. If your Galaxy Smartphone is already connected please press the 3 dots on the top right corner and you will get a dropdown.
3. Now tap on “Emergency Software Recovery “. If you are good to go your phone model will be listed in the window’s list.
If you can see your phone’s model there please select it and click “OK” and follow the onscreen steps to resolve the error.
However, if you are not able to see your phone model or not able to connect to Smart Switch In this case please click on the second option which is “Reinstall device driver “.
When you get the window please click “Confirm” to proceed with phone driver installation.
Continue from "Step-3" once the device driver installation is complete and you can connect your phone to the "Smart Switch."
If you are unable to connect your Galaxy Smartphone to Smart Switch or if your phone model is not listed under "Emergency Software Recovery," you should utilize the Unofficial approach.
This actually helped me. Say, I've noticed it also has "remove FRP". Can you please explain how to perform this operation, too?
AndroidDeveloperLB said:
This actually helped me. Say, I've noticed it also has "remove FRP". Can you please explain how to perform this operation, too?
Click to expand...
Click to collapse
Did you manage it to work?
Naksuhd said:
Did you manage it to work?
Click to expand...
Click to collapse
What do you mean?
It only solved the error. I still have FRP.
I have found this video though, and even though it looks quite dangerous (for the PC), I gave it a try.
I'm only half way there. I got to the point that I'm in the settings of the OS.
The video is here:
link
I had this exact same issue while trying to install twrp on my galaxy s7 edge, after a lot of searching I could'nt find any solutions. I ended up choosing an older version of twrp and uploaded that, which fixed the issue.
DanyBoi05 said:
I had this exact same issue while trying to install twrp on my galaxy s7 edge, after a lot of searching I could'nt find any solutions. I ended up choosing an older version of twrp and uploaded that, which fixed the issue.
Click to expand...
Click to collapse
Hey! Could you report which version of twrp you used? I ran into exactly the same problem with my galaxy s7 edge and would like to try your solution
Man! Thank you! Most readable guide. Tried others, but they are so convoluted, you wrote it so good, fixed soft brick on S10!