Develop Bugs

Eten x610

Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me

hi there
try thees Steps
1. Run the ROM update program on your PC and go through the installation process until your reach the ‘End User Update‘ window. Leave this running.
2. Go to the Temp file in your Documents. This is usually C:\Documents and Settings\username\Local Settings\Temp but it really depends on how you set up Windows.
3. Look for these 2 files, temp.dat (about 60 MB) and USBDLUpdate_Console.exe (about 4 KB) and copy them to your formatted SD Card using a card reader. You might want to copy these files to another location on your PC before copying it to your card reader if there are problems. Also, rename temp.dat to temp.bin before proceeding to the next step.
4. Put this card into your device and put the device into Bootloader mode. This can be done by pressing (and holding) the power button and voice commander key and then soft resetting. When it restarts, you can remove the stylus but keep your hold on the power and voice commander buttons.
5. The installation will proceed but at a slower rate than if you did it on your PC. This is due to the slower transfer rate between the card and device. It might take about 15-30 minutes so it would be best if your device was connected to the mains charger.
6. Installation is complete when you see this message “USB host is not connected yet“. This is your sign to do a soft reset and setup your device as the ROM installation was successful.
***
you may use this rom
http://rapidshare.com/files/314654442/Eten_X610_WWE.7z
just rename temp.dat to temp.bin put in formatted sd card
and go threw steps 4 to 6
any how you are welcome to
http://www.eten-users.eu/index.php?showforum=52

Hello,
I Tried All Ways & Your Roms On Etenusers
But My Boot Loader Shows a White Screen After Using Magic Numbers Method!
What Can I Do?
My Device Is x610 Samir 020 0702
One An Other That: My Booting With All The Roms That I Tested With Memory Card Method Long Only 4-5 Minutes! Isn't It Wrong?

Aha i got it now
Ok i got it now
I understand your problem
you cant do any thing for your device unless you have another Glofiish device (any model)
because your flasher is corrupted
if you find any working Glofiish device (any model) this is how to do it
1- connect the working device to Active Sync
2- download this tool http://rapidshare.com/files/254487467/UnLock_upgrade.rar
3- put one of my roms in the same folder of the tool.
4- open the upgrade.bat
5- flow the installation steps until the device goes to bootloader
6- now disconnect the working device from usb
7- put your device in boot loader mode connect your device to pc
8- push the update button .
and you are done
any how send me your mobile number as PM and i will call you as long as you are
in ksa

Oh A Big Problem!!!!
I'm In Iran & I Think There Are max 10 Glofiish Device In Iran!!!
Some Time My Boot Loader Work But Only With Sd Card
Isn't Any Other Solution?

I have another problem with x610. After hard reseting the phone after I pressed yes on deleting the files, I got myself callibrating the phone but the callibration stucks forever and it does not passes so the phone wont start...
Is there any solution? Please help as after searching I found nothing as a solution so I am asking here.
can I boot somehow from sd card? I mean formatting the phone?

nephew said:
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
Click to expand...
Click to collapse
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..

probir_dev said:
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
Click to expand...
Click to collapse
Hi,
I tried as you said above, when I click YES it showed as bellow
"erase all data and load default ? (Yes)
please wait... "
and nothing had happened and it was showing like that continuously..
What should I do to get back my device?
please help me to sort out this.
thanks in advance..

cant find any solution with 'media scanning"

hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....

In the past I have a problem with media scanner message, always running in the background, although I had no problems about rebooting or soft-resets, it was only a message running in the background always. The way I solve it was to go into "almacenador de medios" (dont know in english, maybe something like "media store") in app manager, and then force stop, clean data and clean cache, reboot and after a first past again, all went ok. I suppose you continue with the message after reseting maybe because cache or dalvik cache is not clean.
Hope that help.
pr0_eMoTIoN said:
hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....
Click to expand...
Click to collapse

have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.

MafiaGR said:
have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.
Click to expand...
Click to collapse
already tried this
but problem havnt solved after "emergency firmware recover"

anyone knows how i can made root without access rights to sd card?
ways like "frameroot.apk" and via bat file "currentroot.bat" - not worked (all those methods need access to sd card)
or maybe there are any commands on ADB to reset or fix sd card?
i'm rly sad with my problem....

what is the model of your phone and ROM?
did You try go back to stock rom with LGMobile Support Tool?
I have same problem but it occurs when I flash to E97510D ROM (my phone is F180K):
http://forum.xda-developers.com/showthread.php?t=2246867
when I want to fix it, I make emergency firmware recovery in LGMobile Support Tool (and factory reset after this).

Maybe your motherboard is giving up

no... every time I go back to stock ROM, its working fine

bihslk said:
Maybe your motherboard is giving up
Click to expand...
Click to collapse
i think this is rly...
cos i have tried already all ways...

[Guide]Unlocking Android Protection Code Without Reset Or Root

THIS METHOD WILL NOT WORK IN NEWER VERSIONS OF ANDROID
Click to expand...
Click to collapse
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
Requirements
Links
1.Download Android Multi Tools- Click Here
2.Universal Adb Drivers - Click Here
Click to expand...
Click to collapse
.
.
Now lets begin
1.First unpack the tool.
2.Then install the adb driver.
3.Turn on your phone and connect it to pc via data cable.
4.Now press 1 to check if your device is connected properly.
5.Now if you have pin,password or face-lock please press 2.
6.If you have pattern lock then press 3.
7.Device will reboot and it will be unlocked.
8.If it still shows pattern,pin or password enter window simply simply give any to unlock.
Click to expand...
Click to collapse
.
.
Other action that can be done by this program are below
.
Choice detail
1.check device for check connection of device to pc.
4.reset gmail for reset gmail login after try many time wrong unlock
5.wipe data for reset all data to factory setting.
6.reboot for reboot device to normal mode or exit from adb shell.
7.check device on fastboot mode for check connection of device to on fastboot mode.
8.wipe data / cache on fastboot mode for erase user datat and cache on fastboot mode to resolve freeze,stuk on boot logo or slow down device. That is often found in the cpu spreadtrum sc6280/sc8810.
9.exit fastboot mode for reboot your pc or exit fastboot.
0.go to command promt for entering dos promt.you can use command in this soft folder and can return to the main program by type exit
s.software info for info cpu inside,firmware version and etc.
H.hardware info for determine the ic number of gsensor,touch screen,camera,wifi and more
Click to expand...
Click to collapse
.
.
.
thanks for reading this post
Written By
Pranto Roy
XDA
Click to expand...
Click to collapse

Links
1.download android multi tools- http://d-h.st/rCh
2. universal adb drivers - http://adbdriver.com/upload/AdbDriverInstaller.exe

prantoroy said:
Links
1.download android multi tools-
2. universal adb drivers -
Click to expand...
Click to collapse
thanks
my younger bro face this problem yesterday and today i got ans
will try and update

Jpjayesh said:
thanks
my younger bro face this problem yesterday and today i got ans
will try and update
Click to expand...
Click to collapse
Sure Please Update

Thnks
Sent from my HTC One X using xda app-developers app

chrisb906 said:
Thnks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
hmm. . . gud
share it!!

Unfortunately, I was not at my work machine.
Pranto Roy said:
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
.
.
.
.
.
.
.
Click to expand...
Click to collapse
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer

Tiszaba said:
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer
Click to expand...
Click to collapse
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question

Pranto Roy said:
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question
Click to expand...
Click to collapse
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?

Tiszaba said:
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?
Click to expand...
Click to collapse
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.

Pranto Roy said:
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.
Click to expand...
Click to collapse
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."

Tiszaba said:
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."
Click to expand...
Click to collapse
I'll Get The Drivers

ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI

ghepier said:
ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI
Click to expand...
Click to collapse
If It Recognized Ur Device It Will Work
And Please Add Details
Eg. What Error Message etc.

Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?

Fossil_Sioux said:
Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?
Click to expand...
Click to collapse
That Is The Exact Process
I'll test it On S3

Didn't work on Motorola XT901
Thanks for supplying such a tool, unfortunately I tried it and had the same result has Fossil_Sioux on a Motorola XT901. Phone is recognized and when I select option 2 it reboots, but the lock screen is still displayed. I enter in any random pin and it just prompts me to try again. Any suggestions?

thanks
thanks for your time in posting this information because i find it very helpful

Nice
Nice thread...thnx man.

Devill007 said:
Nice thread...thnx man.
Click to expand...
Click to collapse
Thanks

One M9 encrypted and no recovery mode

HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me

sjmahmoudi said:
HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me
Click to expand...
Click to collapse
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply a RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.

If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.

computerslayer said:
this problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your sku and whether or not there really is a hardware issue or not, it may be possible to apply a ruu, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your os version, which will help us determine your phone's sku.
Click to expand...
Click to collapse
os: 3.35.401.32

shivadow said:
If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.
Click to expand...
Click to collapse
I rooted this phone when I first bought it. but 4 months ago I unroot it so I could update it's android to marshmallow. after unrooting, i receive the android update and everything was as normal as a fresh unrooted phone.
I was able to go to download mode when first my phone faced this problem. but now the download mode is not available
it says: failed to boot to download mode
press volume up or down to back to menu
this build is for
development purposes only
do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.

computerslayer said:
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply an RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.
Click to expand...
Click to collapse
I took my m9 to HTC service center. he said that main chip must be replaced. after replacing the chip, he said that I need a dump.bin file and I do not have it. now after 3 months, my dear m9 is still on the service center . I search all over the net for the dump.bin file but there is nothing at all.
I do not even know what the hell is the dump.bin file. he said that your phone can boot but it will not have antenna without relevant dump file. I'm confused please help me
my phone model ID: 0PJA100

Did you give your phone to an official HTC service center? HTC should have the needed file so the fact that you should provide it to the service center confuses me a bit.
It's impossible to get that file (from a working phone) without a JTAG device and I doubt that many M9 owners have one since they're quite expensive. Sorry for the bad news.

who one have storage issue here is solution

Now dear friends I will give the solution of problems that occur after unbrick leeco pro3 who has internal storage problem like this
infinite thanks to my Chinese friend Hua found this solution by itself and thanks tora33 from leeco.re and mbtt from forum.one-teams(i use picture from him)
I'm not in charge of the operation to be performed, is designed to assist you in these processes
Charge your mobile phone
1) download : qfil, (that have correct partition) and put in C:/
https://yadi.sk/d/piVn4bpf3MqcHC
2) download : FlashOne1,9 , put in a folder and extract it ,
https://yadi.sk/d/PmVChpqZ3Mj2hz
3) download :fastboot rom
https://yadi.sk/d/uzdwFhie3MqcJs
4)download qq driver
https://yadi.sk/d/U4SIDH3B3Mixsh
run "FlashOne1,9"
How to qfil Flash
When select qfil flash type, press power key, volume up and volume down key at the same time, then the phone enter into qfil mode, connect USB cable with PC, wait for PC install driver automatically, then press ‘Refresh’ button on the tool, serial port will display on UI, select the port you want to flash, and make sure there is no other qcom device connected.
Select corresponding flash zip file, the path of zip file should not contain Chinese and special character. (Under qfil mode, the tool can’t get hardware information, you should check if the software and hardware is matching yourself.)
Press ‘Flash’ button, then start to unzip flash zip file to current folder, but if there is already a corresponding unzip file existing, ‘Decompression folder is exist, re-decompress or not?’ dialog will pop up, if select yes, will re-decompress, else not. After unzip finished, start to flash the phone automatically, and the progress bar display flashing progress(for me the bar not move stuck %1 i did wait 15minute then unplug phone and push power button long time, and at the same time, the flashing log will also be shown on UI.
After flash complete or error happened, a notification dialog will pop up.
after phone start go boot logo and wait by the way open fastboot rom and push le_zl1_fastboot
everyting go fine u get 24gb for 32gb phone and 54gb for 64gb phone
good luck i hope help you

Thanks
Work on x720 ...

Will this work on Custom OMNI rom please?

krugerbud said:
Will this work on Custom OMNI rom please?
Click to expand...
Click to collapse
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!

lazye53 said:
Yes it should work
All you have to do is follow the steps.
Be careful, all your data will be erased!
Click to expand...
Click to collapse
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?

krugerbud said:
But I already have 24GB out of 32GB , but still have storage issues when using the phone. APps and services randomly crash unable to fully use phone.
I guess I do not need this then, must be some other issue?
Click to expand...
Click to collapse
This issue is only for those who are missing storage.
If you have another storage problem, look for another solution.

Storage Problem LeEco Le Pro 3 X720 - 4 GB/32 GB
I followed instructions but it didn't work.
What can I do in order to increase storage to 24 GB?

qfil mode error
Is it for restoring the original storge capacity for Le Pro 3? The reason why I'm asking this is becuase I am currently stuck on qufil rom because it keeps making error everytime I tried to go to the launcher. Will it work on my circumstance?