:?:
:arrow: How can I get into the bootloader of the Treo 700w? What is the exact key sequence?
Thank you in advance!
(p.s. I also posted this in the "Development and Hacking" forum)
#*#UPST is how to get into the bootloader.
My question is, what tools are there for reprogamming?? I have an unlocked Treo 700 that's been activated in Canada.
The cell phone part is working but data is not. In the SETTINGS, ABOUT menu, it shows DATA USER NAME as [email protected]. How do I change that???
Thanks a bunch...later.
I have the same problem please help not working data how cant reprogramming??
700w problem
Cann't enter to boot loader using #*#...
My treo halt after windows started up.
Hard reset not helps.
Windows started and after few seconds it not reacts on touchscreen & keys.
Sync also disconnected, but while pressed hotsync key it play sound, or see blinking cursor if i had time to begin edit anything.
CJEWingnut said:
#*#UPST is how to get into the bootloader.
My question is, what tools are there for reprogamming?? I have an unlocked Treo 700 that's been activated in Canada.
The cell phone part is working but data is not. In the SETTINGS, ABOUT menu, it shows DATA USER NAME as [email protected]. How do I change that???
Thanks a bunch...later.
Click to expand...
Click to collapse
surely this can be changed in ur connections settings panel eh?
...To
To get into bootloader mode you can also hold down the Multimedia button (button on side below the volume button) and press reset.
To program your data you can do ##3282# and edit from there.
Or if you can find a serial cable for it ( made one) you can used QPST.
First option should be easier for you.
The code is for sprint phone. For verizon I think it's #*#3282 + Send key. Hope it helps
please sir iam a new bie .my treo 700w stuck on treo logo, how to fix and get my phone back
Hello, I have tried all methods to get access to my bootloader on my New Zealand (Telecom) Treo 700wx but nothing gives.
It perhaps does not have a boot loader? is this possible because it just seems nothing no1 has suggested will work at all. I have tried all that I could find but no avail.
Any suggestions people? What im trying to do is get windows mobile 6.0 or cross bow installed from a ROMUpdateUtility_Wizard_NoID program and a NK.NBF file. I'm a complete noob so just wanted to see if it would do it but hmm .
Any help would be greatly appreciated
dnt408 said:
To get into bootloader mode you can also hold down the Multimedia button (button on side below the volume button) and press reset.
To program your data you can do ##3282# and edit from there.
Or if you can find a serial cable for it ( made one) you can used QPST.
First option should be easier for you.
The code is for sprint phone. For verizon I think it's #*#3282 + Send key. Hope it helps
Click to expand...
Click to collapse
Everytime i tried *#3282 + Send key in my 700w verizon, the phone asked me to switch ON the phone network first but i failed all the time.
How to fixed this? thanks a lot.
Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
Dear All,
Does anyone have access to Microsoft connect? I happen to posses a development device which is currently known as omnia7 but I could not update the device as I do not have access to Microsoft connect... Could anyone kindly provide the latest image (*.ffu) if possible specifically for "Taylor" from Microsoft connect? would really appreciate it.
Also the device comes with "pre-sales unit radio disabled" but when I insert sim, it detects it and recognizes the number. Checking the about section shows that the phone is enabled and unlocked. Unfortunately, typing *#06# it returns 000000000 as the imei number. Can anyone provide a clue whether I can enable this?
Thanks!
Hey guys,
First off, I don't have any idea where to post this as the phone I'm working with isn't on the forums, so I thought it would be more appropriate here. Please move it into the correct place if there is one. Thank you.
So I'm a new comer of course and I was browsing the internet for solutions to my friends phone issue and I came across this forum. From what I can tell this is a really intellectual environment and therefore was inclined to make an account to see if anyone can help me out with my issue.
The problem(s):
Currently my friend's HTC Wildfire S (T-Mobile) is locked out.
He had tried too many times to unlock it via the pattern and now has to enter in his google email credentials to unlock his phone.
Right now the wifi or data is not on for the phone
Failed solution 1: I tried to call him and have him answer the phone. I then tried to pull the notification tab down in order to enable data or something but that didn't work. I had read on another website that it could work.
Failed solution 2: I downloaded ADB and tried to access the settings.db file in order to edit it via an add on on mozilla firefox. After going to the path where ADB was located i typed in "dir", where settings.db usually is it wasn't there. I then concluded that he probably didn't have USB debugging enabled as that is a strange setting to turn on for no reason.
And now here I am...
He doesn't want a factory reset because he wants his texts, I can only guess that he has important nudes he wishes to save, haha.
Anyway, I'm not too educated in computer or coding language, so if you have any ideas please provide me with some extra details for my noobie status.
As a result of this tinkering, I'm kind of interested in learning how to code and messing around with my Samsung Galaxy S2, so if you also have any pointers for that I'd really appreciate it.
Thanks for your help in advance,
I look forward to engaging in the community and trying to contribute
Hi dear gringa colleagues, I'm Brazilian and I need everyone's help here.
I have a Galaxy m30 cell phone that forgot its default password, that's when the problem starts, I've tried to do the Rard reset, but it doesn't accept reset, I've done all the key games, nothing else to enter the download mode, I've done everything I used the adb commands more of the closed error
I was thinking of putting the rom through the memory card, I don't know if it will work
please help me my cell does not have root access
help please dear grincos