Dear All,
Does anyone have access to Microsoft connect? I happen to posses a development device which is currently known as omnia7 but I could not update the device as I do not have access to Microsoft connect... Could anyone kindly provide the latest image (*.ffu) if possible specifically for "Taylor" from Microsoft connect? would really appreciate it.
Also the device comes with "pre-sales unit radio disabled" but when I insert sim, it detects it and recognizes the number. Checking the about section shows that the phone is enabled and unlocked. Unfortunately, typing *#06# it returns 000000000 as the imei number. Can anyone provide a clue whether I can enable this?
Thanks!
Related
HERM 300/TyTn II by T-Mobile
I am trying to installed goodlink on a cooked ROM (on WM6)but after I download and execute the OTA setup (over the air setup), i get the error:
"Unable to retrieve handheld serial number. ROM Version MaNiLlA2d
Contact IT administrator. Press OK to exist OTA Setup".
I have tried it with other ROMs too but still the same.
I wonder if there is a way to emulate the proper serial number.
Any ideas anyone ?
Thanks
p.s. I had goodlink working fine on WM5 before I replaced the ROM
can you confirm what model phone you have? A Hermes does not equate to a Tytn II as your original post says.
Its a HERM300 as it says in the back. Its a T-mobile MDA Vario
pm me a sample account, so I can test, I installed it but I don't have any use for goodlink.
sorry if my question sounds ***** but what is GoodLink?
some sort of exchange service. I am able to get exchange 2007 working fine on mine sooooooo not sure.
zocster said:
pm me a sample account, so I can test, I installed it but I don't have any use for goodlink.
Click to expand...
Click to collapse
You dont need a sample account to test.
You just go to : https://get.good.com and download the appropriate cab file that matches the hardware / OS.
Then once you install that, the OTA SETUP application appears in your programs. If you try to run this, it will go to the goodlink website and try to download the actual goodlink application. Before it hits the internet it checks the serial number. Thats where the problem appears and the message pops up.
Thanks for the help !
athan01 said:
You dont need a sample account to test.
You just go to : https://get.good.com and download the appropriate cab file that matches the hardware / OS.
Then once you install that, the OTA SETUP application appears in your programs. If you try to run this, it will go to the goodlink website and try to download the actual goodlink application. Before it hits the internet it checks the serial number. Thats where the problem appears and the message pops up.
Thanks for the help !
Click to expand...
Click to collapse
I am up to the point where it ask for a pin
zocster said:
I am up to the point where it ask for a pin
Click to expand...
Click to collapse
I think you have past the point where i got stopped. Have you done anything specific ? i couldnt get to the point where it asked for the pin, as it was checking for the serial number just before that.
Is there anything that i need to do in order to get there?
Thanks
Have you checked the IMEI that the OS is reading from the phone??? If not go to Device Identity in Settings/System and see if the IMEI is corrupted to start with...
dr_tracker said:
Have you checked the IMEI that the OS is reading from the phone??? If not go to Device Identity in Settings/System and see if the IMEI is corrupted to start with...
Click to expand...
Click to collapse
I did. The IMEI looks OK ...
This is very strange....
ALL GREETINGS!!! Prompt who knows how to load new OS into the smartphone? Or who has an experience of dialogue with the Chinese colleagues, to ask a question lupinlau here http://bbs.koxo.cn/viewthread.php?tid=70990&extra=page=1&filter=type&typeid=149 At me it has not turned out to be registered there (((((((Thanks for answers. P.S. Interestingly, really at anybody and it has not turned out to find a way how to enter into a bootloader mode on this smartphone..............? I only could find how to enter into an updating mode through T-Flash, but is not clear yet, what with it to do?
Does anyone know or have any idea where the Kindle Serial Number is located in the device? (not through the menu but stored within the device), the reason I ask is because I am testing eldarerathis' FFF extended bootloader and I was tinkering with flashing Stock ROM (rooted) to the alternate partitions, funny thing is that for some reason the OS is unable to retrieve the Serial Number and so you can't register the device with Amazon. I've looking through every file within the ROM and I have not been able to identify anything that could possibly give me a hint of where the Serial Number is located.
Any thoughts, ideas, suggestions are greatly appreciated.
jopaez said:
Does anyone know or have any idea where the Kindle Serial Number is located in the device? (not through the menu but stored within the device), the reason I ask is because I am testing eldarerathis' FFF extended bootloader and I was tinkering with flashing Stock ROM (rooted) to the alternate partitions, funny thing is that for some reason the OS is unable to retrieve the Serial Number and so you can't register the device with Amazon. I've looking through every file within the ROM and I have not been able to identify anything that could possibly give me a hint of where the Serial Number is located.
Any thoughts, ideas, suggestions are greatly appreciated.
Click to expand...
Click to collapse
If it was sitting in some file, it would be much too easy to spoof and lead to sharing Prime accounts, etc. It would have to be embedded in the hardware somewhere. That's my way of telling you that I have no idea why that setup would have a hard time retrieving the serial number.
jopaez said:
Does anyone know or have any idea where the Kindle Serial Number is located in the device? (not through the menu but stored within the device), the reason I ask is because I am testing eldarerathis' FFF extended bootloader and I was tinkering with flashing Stock ROM (rooted) to the alternate partitions, funny thing is that for some reason the OS is unable to retrieve the Serial Number and so you can't register the device with Amazon. I've looking through every file within the ROM and I have not been able to identify anything that could possibly give me a hint of where the Serial Number is located.
Any thoughts, ideas, suggestions are greatly appreciated.
Click to expand...
Click to collapse
Why are things like this in the Dev section? This needs to be moved to Q&A
The only reason is I feel there is a better chance of getting a response for this type of question from active devs than most regular users. If not agreed by a moderator I'll gladly move this to the Q&A.
I recently bought a Kindle Fire from Ebay and I'm unable to register it on Amazon.
The amazon reps told me that the serial number is blacklisted and recomanded me to return the device to sender and ask for refund.
Well, I'm unable to do that and I don't want to install a custom rom on it.
The serial should be located within the software, and there should be a way to change it (like adding IMEI - see the guide in the dev section).
will it work with fastboot ? does this change the serial number or jst the number that 'adb devices' will display ?
fastboot -s <serial number> specify device serial number
Any help will be greatly appreciated.
you say you dont want to install a custom rom but its really the best and easyiest way around it... I recommend this one http://forum.xda-developers.com/showthread.php?t=1439916
Emeraldu said:
I recently bought a Kindle Fire from Ebay and I'm unable to register it on Amazon.
The amazon reps told me that the serial number is blacklisted and recomanded me to return the device to sender and ask for refund.
Well, I'm unable to do that and I don't want to install a custom rom on it.
The serial should be located within the software, and there should be a way to change it (like adding IMEI - see the guide in the dev section).
will it work with fastboot ? does this change the serial number or jst the number that 'adb devices' will display ?
fastboot -s <serial number> specify device serial number
Any help will be greatly appreciated.
Click to expand...
Click to collapse
It wouldn't do you any good to change the serial number. There's a corresponding security key number paired with it, so changing one won't help without the other. Since Modaco is just an enhanced version of the stock software, it wouldn't be any different either in terms of obtaining Amazon services on the device (sorry pooch).
Contact ebay/paypal and file a dispute.
Hi,
I tried to update my device to rom HD revolution but after doing that, the device isnt recognize the sim card.
when i try to make a phone call, it tells me: "not registered on network".
when i looked at the IMEI no. i saw that the number which is in the device settings is diffrent then the one behinde the battery.
can someone tell me what to do in order to fix that problem?
thank you,
Shay
Did you make a backup of the nvdata before you started off?
Hi guyz, Snakeforhire here. For some reason I can't access my old account anymore so had to create another one :/
My 3rd phone (not in production) is a N7100 which behaves weird since I flashed a stock 4.4.2 ROM on it : when I boot it up, it loads OK, recognizes the SIM card and asks for the PIN to unlock it, but once fully booted it doesn't pick up a carrier and displays the barred circle instead Wifi and bluetooth work OK though.
From what I can see it has a valid IMEI (an analyser tool from PlayStore recognizes it as a valid GN2 IMEI), and the EFS doesn't seem corrupted.
"About device" displays the following info :
Android version : 4.4.2
baseband version : N7100XXUFND3
Kernel version : 3.0.31-1280411
(....)
Build #KOT49H.N7100XXUFND3
Any ideas would be greatly appreciated. Thx !
Has the phone been blacklisted from your carrier? Is it possible there is a loose connection inside?