Related
Okay so I'm new to all this rooting and stuff and I was messing around with TWRP and now my when I turn on my OP3, it shows "md5 checksum failed" with "cache:failed", "system: failed", "system_aging:failed" and goes into a bootloop. And I cant even boot it to recovery mode. It's driving me crazy!
Can you still boot into fastboot? Turn on with volume up, if so reflash TWRP, and then restore your backup, or flash a stock rom.
ghostofcain said:
Can you still boot into fastboot? Turn on with volume up, if so reflash TWRP, and then restore your backup, or flash a stock rom.
Click to expand...
Click to collapse
I can boot it into fasboot and I tried flashing TWRP, OxygenOs and even Cyanogenmod. Still didnt work.
Didn't work how, are you getting errors in console?. Can you flash TWRP and boot into it?
You have successfully bricked your device.
Don't worry use a Oneplus download tool to download stock firmware to your device in download mode.
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
The method 2 worked fine for me.
Go ahead..!!
Hope it helps
A bricked device is broken unable to be fixed, this is a soft brick as you can still get it to respond.
For future users if you broke something and want help please supply at least the following.
1. What you did, yes it's embarrassing but maybe someone can undo it.
2. What you are still able to do, can you access recovery, fastboot or adb.
3. What you've tried, if you try and flash something and get an error message let us know.
The more information you supply the better the chances someone can help. A simple my device is bricked help can't achieve much.
So I'm telling now how I got to this situation:
I'd installed a rooted OxygenOS with TWRP. I don't know how I thought it was a good idea to lock the bootloader after I installed TWRP, still did it. After that I was able to load in to fastboot, nothing else. Followed Method 1 on the link from Joyo-rocker and came to the posters message. Now I'm trying Method 2. Will update this post.
Edit: If your phone shows the boot messages "md5 checksum failed" with "cache:failed", "system: failed", "system_aging:failed" you need to fully reload your ROM over the unbrick tool. Look for Method 2 in Joyo-rockers link in this post (cant post links yet)
flobiwahn said:
So I'm telling now how I got to this situation:
I'd installed a rooted OxygenOS with TWRP. I don't know how I thought it was a good idea to lock the bootloader after I installed TWRP, still did it. After that I was able to load in to fastboot, nothing else. Followed Method 1 on the link from Joyo-rocker and came to the posters message. Now I'm trying Method 2. Will update this post.
Click to expand...
Click to collapse
Had the same issue, method 2 works fine.
Hi
I have same issue!!!
I tried the secund method! But the same.....after the 1+ logo :
cache: failed
boot: failed
boot_aging: failed
system: failed
md5 checksum failed
I opened the Msmdownloadertool v3.0.2 using Admin privileges!
Volume up 10s connected phone usb cable....
press 'start" ....after I get green indicator in the tool...My phone rebooted....and I got these messege ! .....and my phone turn off.....
Please help
Please...
kovacsabesz said:
Hi
I have same issue!!!
I tried the secund method! But the same.....after the 1+ logo :
cache: failed
boot: failed
boot_aging: failed
system: failed
md5 checksum failed
I opened the Msmdownloadertool v3.0.2 using Admin privileges!
Volume up 10s connected phone usb cable....
press 'start" ....after I get green indicator in the tool...My phone rebooted....and I got these messege ! .....and my phone turn off.....
Please help
Please...
Click to expand...
Click to collapse
You didnt download the right tool, method 2 includes every needed partition and should revert you to full stock 3.1.2
Oh,
Done.....
I fixed it! Thanks guys!
Deleted
---------- Post added at 09:07 AM ---------- Previous post was at 09:00 AM ----------
sashamalla said:
Okay so I'm new to all this rooting and stuff and I was messing around with TWRP and now my when I turn on my OP3, it shows "md5 checksum failed" with "cache:failed", "system: failed", "system_aging:failed" and goes into a bootloop. And I cant even boot it to recovery mode. It's driving me crazy!
Click to expand...
Click to collapse
Go to the folder where the recovery tool.exe is. Boot your phone into Fastboot.
Search for cache.img, system.img, system_aging.img and put them in your ADB file folder
Type this:
Fastboot devices > doesn't show up? No worries I'll help you later this day just let me now.
Fastboot flash system system.img
Fastboot flash system_aging.img
Fastboot flash cache cache.img
If it boots and you don't have Sim and WiFi. Then reflash Oxygen OS and don't boot it! Boot it into Fastboot and type:
fastboot erase modemst1
fastboot erase modemst2
Now boot it and u can do whatever you want!
Same happened to me, reinstall windows and start again with method two, was a driver issue
TheLoverMan said:
Same happened to me, reinstall windows and start again with method two, was a driver issue
Click to expand...
Click to collapse
Why would you install windows instead fix the driver thing.
Was having problems with uninstalling the drivers. They would always come back so only way I could do it was by a reinstall of windows.
This was already mentioned, as i remember. Just let me search for a minute cause i had this same issue.
http://forum.xda-developers.com/attachment.php?attachmentid=3875375&d=1473889816
Flash this TWRP, it is 3.0.2-19 for temporary but i use it as daily.
kovacsabesz said:
Oh,
Done.....
I fixed it! Thanks guys!
Click to expand...
Click to collapse
Hey! Im having the same problem. Please help me with the way you did, Im Stuck . please help
TheLoverMan said:
Was having problems with uninstalling the drivers. They would always come back so only way I could do it was by a reinstall of windows.
Click to expand...
Click to collapse
Ye well there is a driver enforce mode link even in the hardbrick guide... No need to reinstall Windows lol
I Unbricked Successfully
I unbricked the phone successfullly but now during startup its asking me password. The one I had isn't working and I dont know what to do. can anyone help me here? Can I find a Password in the recovery tool?
Pratik121 said:
I unbricked the phone successfullly but now during startup its asking me password. The one I had isn't working and I dont know what to do. can anyone help me here? Can I find a Password in the recovery tool?
Click to expand...
Click to collapse
You see.. OOS had force encryption. Go to Fastboot and type "fastboot erase userdata" then go to recovery and flash OOS or any other rom.. Password should be gone now.
Hello guys,
my Oneplus 3 is hard bricked, I tried the methods in the Mega Unbrick guide, my device already gets shown as Qualcomm 9008 ... in Device Manager, so I started the MSM DownloadTool and it flashed anything without errors. But when the phone reboots I get a black screen and the white led is on.
I can't even boot to stock recovery (Volume down + power doesn't work and rebooting to recovery through fastboot doesn't work, too....) my bootloader is locked and all attempts to unlock the bootloader are failing with the error "remote: oem unlock is not allowed"
So at the moment I'm stuck in fastboot and nothing else works -.-
Can someone please help me?
The unbrick tool has an old firmware, can I replace the files with files from a newer firmware?
Thanks!
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Puddi_Puddin said:
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Click to expand...
Click to collapse
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
min-dfreak said:
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
Click to expand...
Click to collapse
Ye thats the only thing you can currently do... May i ask what you have done how did it get bricked?
I just updated AICP ota and after flashing the update my phone didn't boot up. The screen went black immediately.
So I thought that it is maybe a Problem with the ROM and I tried to go back to stock.
Flashed the stock recovery and locked the bootloader, but I couldn't boot to the stock recovery.
There it started...
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
drmuruga said:
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
Click to expand...
Click to collapse
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
min-dfreak said:
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
Click to expand...
Click to collapse
Never but never lock your bootloader...
If recovery, boot or system partition is modified. There's no harm in re locking otherwise..
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Dsn Fouad said:
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Click to expand...
Click to collapse
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
SivaMaxwell said:
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
Click to expand...
Click to collapse
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Dsn Fouad said:
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Click to expand...
Click to collapse
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
SivaMaxwell said:
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
Click to expand...
Click to collapse
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Dsn Fouad said:
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Click to expand...
Click to collapse
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Thanks i will download and give it a try
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Dsn Fouad said:
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Click to expand...
Click to collapse
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
SivaMaxwell said:
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
Click to expand...
Click to collapse
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Dsn Fouad said:
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Click to expand...
Click to collapse
Even if the bootloader is locked, you can boot into the current rom and unlock simply by going to advanved options.
It is a very simple process.
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
Two quick questions:
1.The phone died on its self without your intervention or...?
2.Have you tried to flash the stock firmware via MiFlash , while the phone is in edl mode(the command is: fastboot oem edl)?
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
I think you are confusing some things here; adb is not an option now so you can´t boot device normally and also you said "fastboot edl" but they are different modes.
While in fastboot how did you try booting to TWRP image? (you said through adb but this is not right)
Can you get to fastboot? (hold vol down while booting, should see a rabbit on the screen)
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
When your phone is in EDL mode(you won't be seeing any logo on your phone ,only black screen) it's absolutely normal to see the device as COM port , because the device is in another factory mode. And there is no problem flashing stock ,when your phone is seen as COM port. So if you can't flash the stock firmware in fastboot mode or EDL mode , maybe you have a hardware issue. To be sure -take a screenshot of the error in MiFalsh when the phone is in edl Mode (seen as a COM port) and you try to flash the stock firmware.
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
pocchio said:
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
Click to expand...
Click to collapse
Here is the stock firmware from Xiaomi site:
https://en.miui.com/getrom-354.html?m=yes&mobile=2
Don't worry that it says MIUI , the firmware is Android One , they just forgot to change the name from MIUI to Android One , I have already tried it ,and I can confirm that it's 100% stock Android One firmware , good luck!
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
pocchio said:
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
Click to expand...
Click to collapse
I will give a solution in a minute
EDIT: Are you sure your bootloader is unlocked? (fastboot oem unlock)
You have two choices , you need to find an older version of MiFlash beta , i'll give you a video :
https://m.youtube.com/watch?v=-7O1Svib14g
In the video description you can find a link for the MiFlash beta ,I hope it helps.
If not , you'll have to consider the Testpoint unbrick method , there are several guides.
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
pocchio said:
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
Click to expand...
Click to collapse
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
nikoman1987 said:
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
Click to expand...
Click to collapse
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
pocchio said:
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
Click to expand...
Click to collapse
the command is: fastboot oem get-product-model
nikoman1987 said:
the command is: fastboot oem get-product-model
Click to expand...
Click to collapse
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
pocchio said:
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
Click to expand...
Click to collapse
tried the command too, it doesn't work.
So test point doesn't work too.. That's bad news
EDIT: fastboot getvar product command works , you can try it
And another question , have you tried to boot with patched boot.IMG ?
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
You need a recovery to flash , which has a specific partition in the phone storage. You can flash only via fastboot . You need to boot into recovery , so try with a patched boot image for your version of the rom
---------- Post added at 02:47 PM ---------- Previous post was at 02:38 PM ----------
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
So the last resort , we'll try to flash the ROM that I have mentioned before via fastboot. Place the zip file GM 1.1 in your PC (it has to be in the same directory as your adb and fastboot tools)
then open cmd and run the command
fastboot flash (the full name of the zip).zip
and hit enter
maybe that will solve it
And if this doesn't help again... type these fastboot commands :
fastboot format userdata
fastboot format system
fastboot format cache
fastboot format vendor
fastboot format recovery
fastboot format boot
then try again to reflash the stock rom (first try in edl mode ,if this doesn't do anything ,you'll have to format everything via fastboot commands again ,and try to flash the ROM in fastboot mode)
And if this doesn't help too... Then you're free to hit that ? in the ground hahahah (just kidding)
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
pocchio said:
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
Click to expand...
Click to collapse
which version of the firmware you are flashing? 10.0.9.0 or another version , so I can send you a link and walk you through the procedure.
And when you flashed the GM 1.1 the boot screen didn't changed from Android one? (the GM 1.1 version is a MIUI stock port and has to change your boot screen to black screen with white MI logo on it) It is very important to know
One of my friends told me to try this: just open the directory of the stock firmware , navigate to flash_all.bat and run the bat file (NOT THE FLASH_ALL_LOCK!!!) and wait for the end of the process. He had a similar problem , and it worked. He explained that for any reason , the recovery was the problem , because it was flashed in the boot partition. When you use flash_all.bat The file will erase all partitions and rewrite them. MiFlash won't , so try that
I was flashing pixel experience rom in my unlocked bootloader
° Wiped dalvik cache and art
° Flashed firmware
° Flashed Custom Rom
Then Later Rebooted. And device got dead
No display no fastboot no recovery
When connected with mi flash tool I can see COM10 in device
Whats happend really?
u should go to service center ,i had got this issue in my previous samsung phone and the service center guys replaced motherboard with new and gave it back.
prathu.x said:
u should go to service center ,i had got this issue in my previous samsung phone and the service center guys replaced motherboard with new and gave it back.
Click to expand...
Click to collapse
Can't fix it via local shops? Since warranty is not there bcz me unlocked bootloader
abi00723 said:
Can't fix it via local shops? Since warranty is not there bcz me unlocked bootloader
Click to expand...
Click to collapse
u can try in local shops
Unlocked bootloader is still under warranty. Try it.
Animesh Singh said:
Unlocked bootloader is still under warranty. Try it.
Click to expand...
Click to collapse
But me flashed custom rom too,
abi00723 said:
I was flashing pixel experience rom in my unlocked bootloader
° Wiped dalvik cache and art
° Flashed firmware
° Flashed Custom Rom
Then Later Rebooted. And device got dead
No display no fastboot no recovery
When connected with mi flash tool I can see COM10 in device
Whats happend really?
Click to expand...
Click to collapse
That sounds bad. You tried booting to Fastboot, right?
When the phone can't even boot into Fastboot Mode, it'll automatically boot into EDL Mode.
The Qualcomm EDL (Emergency DownLoad Mode). In that mode, you can still flash a ROM, but through "QPST" (Qualcomm Product Support Tool): https://androidmtk.com/download-qpst-flash-tool
I think you can use Fastboot ROMs with that tool. But I also must mention that you may not be able to flash a ROM, because the Qualcomm EDL Mode may be locked to only Authorised Repair Centres, and to those who have some type of a key or something...
I have a bit of experience with that mode, because I deliberately erased all partitions (including the critical ones required for booting Fastboot etc), without having thought about the consequences :
https://www.reddit.com/r/Xiaomi/comments/ntptsb
I wasn't able to recover it with EDL (didn't communicate properly with phone), and I had to replace it.
dreamytom said:
That sounds bad. You tried booting to Fastboot, right?
When the phone can't even boot into Fastboot Mode, it'll automatically boot into EDL Mode.
The Qualcomm EDL (Emergency DownLoad Mode). In that mode, you can still flash a ROM, but through "QPST" (Qualcomm Product Support Tool): https://androidmtk.com/download-qpst-flash-tool
I think you can use Fastboot ROMs with that tool. But I also must mention that you may not be able to flash a ROM, because the Qualcomm EDL Mode may be locked to only Authorised Repair Centres, and to those who have some type of a key or something...
I have a bit of experience with that mode, because I deliberately erased all partitions (including the critical ones required for booting Fastboot etc), without having thought about the consequences :
https://www.reddit.com/r/Xiaomi/comments/ntptsb
I wasn't able to recover it with EDL (didn't communicate properly with phone), and I had to replace it.
Click to expand...
Click to collapse
We can repair that with mi authorised account or emmc repairing?
dreamytom said:
That sounds bad. You tried booting to Fastboot, right?
When the phone can't even boot into Fastboot Mode, it'll automatically boot into EDL Mode.
The Qualcomm EDL (Emergency DownLoad Mode). In that mode, you can still flash a ROM, but through "QPST" (Qualcomm Product Support Tool): https://androidmtk.com/download-qpst-flash-tool
I think you can use Fastboot ROMs with that tool. But I also must mention that you may not be able to flash a ROM, because the Qualcomm EDL Mode may be locked to only Authorised Repair Centres, and to those who have some type of a key or something...
I have a bit of experience with that mode, because I deliberately erased all partitions (including the critical ones required for booting Fastboot etc), without having thought about the consequences :
https://www.reddit.com/r/Xiaomi/comments/ntptsb
I wasn't able to recover it with EDL (didn't communicate properly with phone), and I had to replace it.
Click to expand...
Click to collapse
After flashing rom I tried to reboot into twrp for formatting device. Then no response. I can see com10 in mi flash tool
abi00723 said:
After flashing rom I tried to reboot into twrp for formatting device. Then no response. I can see com10 in mi flash tool
Click to expand...
Click to collapse
Yeah I think your phone unfortunately got hardbricked somehow through that Flash..
Yes, I think it has to be a Mi Authorised Account.
But you can still try your luck and try QPST/QFIL, maybe you'll be able to flash it! If you need help with QPST, you can do some research with Google and YouTube, and ask me.
dreamytom said:
Yeah I think your phone unfortunately got hardbricked somehow through that Flash..
Yes, I think it has to be a Mi Authorised Account.
But you can still try your luck and try QPST/QFIL, maybe you'll be able to flash it! If you need help with QPST, you can do some research with Google and YouTube, and ask me.
Click to expand...
Click to collapse
Is there anyway to contact you in telegram?
abi00723 said:
Is there anyway to contact you in telegram?
Click to expand...
Click to collapse
Yes sir, my username's @dreamytom
Update : the phone stucked in edl mode and u need one authorised mi account to flash
good evening
I have been trying to return to stock miui from Pixel Experience since yesterday but get this error every time I try to flash the Firmware and do not know what I can do about it. I would be happy if somebody knew what this error is from and what might fix it.
Same problem. Don't try more things because you will brick your phone like mine.
Thanks for your reply. What did you do that bricked your Phonem? This way I know what to avoid. Thanks you in advance
As you are sure your device is a eea one, try with this last official stable firmware : Version: V13.0.7.0.SKHEUXM
You can find it here https://new.c.mi.com/global/miuidownload/detail/device/1900394
Fastboot version here at bottom : https://xiaomifirmwareupdater.com/miui/alioth/stable/V13.0.7.0.SKHEUXM/
Or https://bigota.d.miui.com/V13.0.7.0...EUXM_20220627.0000.00_12.0_eea_e461331a7d.tgz
Thanks you so much I will try that
and i did not mention this but I started this whole project of returning to miui because my poco was and still is in a bootloop and is only accessible over fastboot, not recovery and even though it sometimes gets to the system it almost instantly crashes and reboots
Still the Same Error unfortunatelly
nockcx said:
and i did not mention this but I started this whole project of returning to miui because my poco was and still is in a bootloop and is only accessible over fastboot, not recovery and even though it sometimes gets to the system it almost instantly crashes and reboots
Click to expand...
Click to collapse
Ok,
Do you have any idea what you did that may have caused this bootloop ?
Have you used any Qualcomm Tools or any soft in EDL mode ?
No, I did not do anything that would mess with the system to my knowledge . which is why i really do not know what to do. Can This Error occur because of a USB 3.0 used to flash? The Phone even tries to reboot when it is detected as a Fastboot device, maybe This has Something to do with it. Maybe it loses the Connection and therefore the flashing process stops. Are there possible ways to fix This?
Try with the latest android platform tools.
Put the content of platform tools archive in the fastboot folder and launch flash_all.bat don't use flash_all_lock
Still the Same Error . Can This be because of a Driver or a hardware issue?
i had similar issues but with the super partition when trying to flash from cmd.
flashing with miflash instead solved it.
It doesnt seem to make any difference to the error whether i flash it via cmd or miflash
nockcx said:
Still the Same Error . Can This be because of a Driver or a hardware issue?
Click to expand...
Click to collapse
Maybe : So as you can try with other PC, USB cable, USB connector, reinstall USB drivers...
I already tried with two Notebooks, I will try again tomorrow with another PC and installing USB drivers again. Thank you
You could try redownloading the MIUI ROM... you got it from xiaomifirmwareupdater.com right?
And yes ^^, try other PCs/laptops and other USB-cables.
Just please make sure
Unfortunately, Fastboot-Flashing is a gamble. It's not a solid protocol. It has zero protection against sudden USB-connection loss.
And manufacturers like Xiaomi go out of their way and block Qualcomm's EDL Mode, which is the only way to recover your phone in case Fastboot Mode stops working, because that Mode itself can also get damaged.
Fixed - first flash a miui recovery rom from twrp make sure the rom version lower than the latest one, now flash and boot miui , now just update from miui updater once you updated to the latest version , now try to flash the fastboot rom that you trying to flash, it should work.
I cant access a bootloader like TWRP because the phone still keeps rebooting after a couple of seconds in the bootloader so i cant really do much. I only have access to fastboot
nockcx said:
just flash a custom vbmeta and then install a custom recovery in to the boot partition like fastboot flash boot ....flash both the slots boot_a and boot_b the run fastboot reboot recovery do all this with latest platform tools
Click to expand...
Click to collapse
okay Im as far as I have never been with a very weird method, maybe somebody can explain. Because my poco always wants to reboot I found out a way to keep in in Fastboot mode. I repeatedly press the power and volume down button, This way it stays on for a lot longer, but it still is not enough to succeed at flashing the rom. It also lets me believe that my problem is not a software but probably a hardware problem, otherwise and cannot explain this suuuper weird behavior. what do you guys think? is there a possible fix you know?