Question Phone Bricked - Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40

I was flashing pixel experience rom in my unlocked bootloader
° Wiped dalvik cache and art
° Flashed firmware
° Flashed Custom Rom
Then Later Rebooted. And device got dead
No display no fastboot no recovery
When connected with mi flash tool I can see COM10 in device
Whats happend really?

u should go to service center ,i had got this issue in my previous samsung phone and the service center guys replaced motherboard with new and gave it back.

prathu.x said:
u should go to service center ,i had got this issue in my previous samsung phone and the service center guys replaced motherboard with new and gave it back.
Click to expand...
Click to collapse
Can't fix it via local shops? Since warranty is not there bcz me unlocked bootloader

abi00723 said:
Can't fix it via local shops? Since warranty is not there bcz me unlocked bootloader
Click to expand...
Click to collapse
u can try in local shops

Unlocked bootloader is still under warranty. Try it.

Animesh Singh said:
Unlocked bootloader is still under warranty. Try it.
Click to expand...
Click to collapse
But me flashed custom rom too,

abi00723 said:
I was flashing pixel experience rom in my unlocked bootloader
° Wiped dalvik cache and art
° Flashed firmware
° Flashed Custom Rom
Then Later Rebooted. And device got dead
No display no fastboot no recovery
When connected with mi flash tool I can see COM10 in device
Whats happend really?
Click to expand...
Click to collapse
That sounds bad. You tried booting to Fastboot, right?
When the phone can't even boot into Fastboot Mode, it'll automatically boot into EDL Mode.
The Qualcomm EDL (Emergency DownLoad Mode). In that mode, you can still flash a ROM, but through "QPST" (Qualcomm Product Support Tool): https://androidmtk.com/download-qpst-flash-tool
I think you can use Fastboot ROMs with that tool. But I also must mention that you may not be able to flash a ROM, because the Qualcomm EDL Mode may be locked to only Authorised Repair Centres, and to those who have some type of a key or something...
I have a bit of experience with that mode, because I deliberately erased all partitions (including the critical ones required for booting Fastboot etc), without having thought about the consequences :
https://www.reddit.com/r/Xiaomi/comments/ntptsb
I wasn't able to recover it with EDL (didn't communicate properly with phone), and I had to replace it.

dreamytom said:
That sounds bad. You tried booting to Fastboot, right?
When the phone can't even boot into Fastboot Mode, it'll automatically boot into EDL Mode.
The Qualcomm EDL (Emergency DownLoad Mode). In that mode, you can still flash a ROM, but through "QPST" (Qualcomm Product Support Tool): https://androidmtk.com/download-qpst-flash-tool
I think you can use Fastboot ROMs with that tool. But I also must mention that you may not be able to flash a ROM, because the Qualcomm EDL Mode may be locked to only Authorised Repair Centres, and to those who have some type of a key or something...
I have a bit of experience with that mode, because I deliberately erased all partitions (including the critical ones required for booting Fastboot etc), without having thought about the consequences :
https://www.reddit.com/r/Xiaomi/comments/ntptsb
I wasn't able to recover it with EDL (didn't communicate properly with phone), and I had to replace it.
Click to expand...
Click to collapse
We can repair that with mi authorised account or emmc repairing?

dreamytom said:
That sounds bad. You tried booting to Fastboot, right?
When the phone can't even boot into Fastboot Mode, it'll automatically boot into EDL Mode.
The Qualcomm EDL (Emergency DownLoad Mode). In that mode, you can still flash a ROM, but through "QPST" (Qualcomm Product Support Tool): https://androidmtk.com/download-qpst-flash-tool
I think you can use Fastboot ROMs with that tool. But I also must mention that you may not be able to flash a ROM, because the Qualcomm EDL Mode may be locked to only Authorised Repair Centres, and to those who have some type of a key or something...
I have a bit of experience with that mode, because I deliberately erased all partitions (including the critical ones required for booting Fastboot etc), without having thought about the consequences :
https://www.reddit.com/r/Xiaomi/comments/ntptsb
I wasn't able to recover it with EDL (didn't communicate properly with phone), and I had to replace it.
Click to expand...
Click to collapse
After flashing rom I tried to reboot into twrp for formatting device. Then no response. I can see com10 in mi flash tool

abi00723 said:
After flashing rom I tried to reboot into twrp for formatting device. Then no response. I can see com10 in mi flash tool
Click to expand...
Click to collapse
Yeah I think your phone unfortunately got hardbricked somehow through that Flash..
Yes, I think it has to be a Mi Authorised Account.
But you can still try your luck and try QPST/QFIL, maybe you'll be able to flash it! If you need help with QPST, you can do some research with Google and YouTube, and ask me.

dreamytom said:
Yeah I think your phone unfortunately got hardbricked somehow through that Flash..
Yes, I think it has to be a Mi Authorised Account.
But you can still try your luck and try QPST/QFIL, maybe you'll be able to flash it! If you need help with QPST, you can do some research with Google and YouTube, and ask me.
Click to expand...
Click to collapse
Is there anyway to contact you in telegram?

abi00723 said:
Is there anyway to contact you in telegram?
Click to expand...
Click to collapse
Yes sir, my username's @dreamytom

Update : the phone stucked in edl mode and u need one authorised mi account to flash

Related

Mi Max Stuck On Mi Logo and Bootloop

Hi Guys. I have a problem with my Mi Max 32/3gb. After OTA update it stucks on bootloop while the boot loader was locked and unrooted. I tried every method found in c.Mi.com and xda websites. nothing helped me to overcome this problem. I could enter to fastboot and also EDL modes, I also opened the back cover to remove the battery and shorting the test points but no luck. In fastboot mode I got error because the bootloader was locked, while in EDL mode I could successfully flash the fastboot roms including Ch_Dev, Ch_sta, Glob_Dev, and Glob_sta, but after turning on the phone, it shows bootloop again and again. But on time accidentally my phone loaded on boot and came alive (I don't know how!!). this time I first signed in with my mi account and applied for unlocking bootloader, then factory rested the device to see if it boot-up again or not. unfortunately it again stucked on bootloop. After unlocking the bootloader, I tried recovery roms using mi PC suite beta (Chinese version) which got error says something like your bootloader is locked (but it is not), Also I tried loading recovery rom using TWRP which the procedure stucks at "package_extract_file took 00s" for about 60mins and nothing happen. the only differences between all of these methods is bootloop at MI logo, bootloop at Mi logo and android logo with three blinking dots, freeze at MI logo, and freeze at Mi logo and android logo with three blinking dots. Any Idea?
Clear data after flashing, also only use save userdata when flashing fast boot rom
MM.626 said:
Clear data after flashing, also only use save userdata when flashing fast boot rom
Click to expand...
Click to collapse
Thank you for your reply. Tried before but not helped.
I can flash fast boot rom successfully in Fastboot and edl modes using Mi flash tools beta and also Mi PC suit without any error, but the phone cannot boot and still freeze at mi logo and some time bootloop. Flashing recovery rom is not possible in recovery mode even using TWRP and Mi PC suit, freeze in the beginning of flashing. How can I check to see if all necessary files of fast boot rom were copies to memory? I thing some thing force memory to lock especially in recovery mode!!!!
Any idea?
Maybe you should unlock the bootloader?
MM.626 said:
Maybe you should unlock the bootloader?
Click to expand...
Click to collapse
The bootloader has already been unlocked. No difference, still freeze at mi logo.
It is also weired, why I cannot flash recovery rom!! Geuse there is something wrong.
lordcx said:
The bootloader has already been unlocked. No difference, still freeze at mi logo.
It is also weired, why I cannot flash recovery rom!! Geuse there is something wrong.
Click to expand...
Click to collapse
i know, i just went back to miui9 from nitrogen oreo last week, my bootloader was unlocked too. but mine also couldn't boot past mi logo, so i tried everything like you did, the only thing worked for me was to re-unlock bootloader, flash fastboot rom, clear data in recovery, reboot.
MM.626 said:
i know, i just went back to miui9 from nitrogen oreo last week, my bootloader was unlocked too. but mine also couldn't boot past mi logo, so i tried everything like you did, the only thing worked for me was to re-unlock bootloader, flash fastboot rom, clear data in recovery, reboot.
Click to expand...
Click to collapse
You mean you used clean_all and lock option at miflash tool and then re-unlocked it using mi unlock tool again?
Can you explain more? I have not lock the bootloader again fearing cannot relock it for the next time.
Any luck here ?
Did you test flashing miui 8 ?
No luck, I tried evey methodes and evey roms, but no luck
Did you send it to service center ?
head_djmusic said:
Did you send it to service center ?
Click to expand...
Click to collapse
No it was out of warranty.
I sold it for spare parts. Sad story.
Sad
lordcx said:
No it was out of warranty.
I sold it for spare parts. Sad story.
Click to expand...
Click to collapse
Well, i will test with QFIL and if it didn't solve the problem, i will sell it as spare, too!
And life is going on!
head_djmusic said:
Well, i will test with QFIL and if it didn't solve the problem, i will sell it as spare, too!
And life is going on!
Click to expand...
Click to collapse
I have tested with qfil too, it returned an error for data partition, i do not remmember the exact massage but I could not find any solotion for it. Seems my partitions was write protected or something like that. Hope you can resolve yours and let me know if you need my experiance.
Thanks, Seems the problem is from BOOT Partition, i will sell it as spare part, too !
Thanks for your help friend

Locked Bootloader, No access to Operating System

I have a Xiaomi Note 8 Pro initially came with China Stable Rom V11.0.3.0.PGGCNXM. It was also unlocked.
I accidentally flashed Global Stable ROMV11.0.6.0.PGGMIXM via MiFlashTool and while it was successful, it rebooted to Recovery Mode with the message "This MIUI version can't be installed on this device".
After that, I pressed "Wipe All Data", so now the device is also locked.
Since there is no OS installed, I cannot access the device and consiquently to use Mi Unlock Tool properly to Unlock it again.
The device is now locked, without OS installed. However I can access Fastboot menu and Recovery mode.
Is there anyway to unlock the device in this state and flash it's original Rom again?
Please if you have anything to suggest that might help me, answer my question. I'm desperate. :crying:
Hmmm. Can you still access fastboot mode? If yes I recommend using miflash pro and flashing the correct rom for your device, or manually flashing all images via fastboot.
You've likely selected Clean all and lock (default setting) which flashed MIUI and locked the bootloader afterwards which bricked the device because of cross-region ROM flashing. Since you can't flash it with locked bootloader your only option is to take it to the service center.
@JuanM2020 @n0b0dy666 First of all, thank you guys for your suggestions.
Update: I tried to flash it's original Rom via MiFlash Pro, however when I connected my device on the final step, as for the SP tool to flash the Rom, my pc couldn't detect it. I even risked and disassembled the device to remove the battery in order to turn off the device, but it didn't work either. (Cdc & Vcom Mediatek drivers both installed properly on my pc).
The device is recognized by my computer when in Flashboot menu. However for the SP tool to work, it should be turned off, but recognizable from computer.
Before posting here, of course I went to a service center, but they told me because I tried to install Global Rom 11.0.06, while it's original Rom was China Stable Rom 11.0.03, I should wait for the 11.0.06, as a downgrade is not possible (not sure if it's true). We don't have an official Xiaomi Center in my county, where I go was the best chance I had.
Any other recommendations?
RenginaP said:
@JuanM2020 @n0b0dy666 First of all, thank you guys for your suggestions.
Update: I tried to flash it's original Rom via MiFlash Pro, however when I connected my device on the final step, as for the SP tool to flash the Rom, my pc couldn't detect it. I even risked and disassembled the device to remove the battery in order to turn off the device, but it didn't work either. (Cdc & Vcom Mediatek drivers both installed properly on my pc).
The device is recognized by my computer when in Flashboot menu. However for the SP tool to work, it should be turned off, but recognizable from computer.
Before posting here, of course I went to a service center, but they told me because I tried to install Global Rom 11.0.06, while it's original Rom was China Stable Rom 11.0.03, I should wait for the 11.0.06, as a downgrade is not possible (not sure if it's true). We don't have an official Xiaomi Center in my county, where I go was the best chance I had.
Any other recommendations?
Click to expand...
Click to collapse
If you can still access fastboot mode flash correct images manually.
E.g.:
Fastboot flash system system.img
Fastboot flash vendor vendor.img
Fastboot flash recovery recovery.img
Etc etc
JuanM2020 said:
If you can still access fastboot mode flash correct images manually.
E.g.:
Fastboot flash system system.img
Fastboot flash vendor vendor.img
Fastboot flash recovery recovery.img
Etc etc
Click to expand...
Click to collapse
So sorry for my late response. Is there any guide about manual flashing which I can follow for that?
RenginaP said:
So sorry for my late response. Is there any guide about manual flashing which I can follow for that?
Click to expand...
Click to collapse
https://www.xiaomigeek.com/flash-miui-fastboot-rom-using-command.html
Could you fix it?

Question Bricked Poco F3, need help

Hello guys, I was returning to stock rom through miflash, but the process was interrupted right at the beginning and I was unable to continue. I went to restart the cell phone to try to perform the process again, however when doing this the cellphone simply does not give the image, nor vibrates. I think that because it interrupted the process, the system image was corrupted, or something. Would you know of anything I can do to try to recover my cell phone? I can't access anything from him. The computer does not recognize it, and I cannot enter fastboot mode.
What happens when you hold power and volume down when booting?
Try EDL (Emergency Download Mode):
How to Enter EDL (Emergency Download) Mode Xiaomi Devices
How to Enter EDL (Emergency Download) Mode Xiaomi Devices EDL (Emergency Download Mode) is the mode required to flashing Stock ROM of Android Xiaomi devices that are usually applied to Xiaomi devices that use Qualcomm Processor. fastboot edl zip fastboot edl v2 edl mode redmi note 3 download...
www.beritahuaja.com
Download adb driver from xda install them
Then if you can access your fastboot mode on phone just plug it to pc on usb 2.0 not usb 3.0 you can flash it with mi flash tool and check clean all not clean and lock
Just control your fastboot rom with 7zip before flashing if corrupted it will show you a message
If you flashed your phone and choose clean and lick you need edl mode xiaomi authorized account to unbrick your phone
Robert314 said:
What happens when you hold power and volume down when booting?
Try EDL (Emergency Download Mode):
How to Enter EDL (Emergency Download) Mode Xiaomi Devices
How to Enter EDL (Emergency Download) Mode Xiaomi Devices EDL (Emergency Download Mode) is the mode required to flashing Stock ROM of Android Xiaomi devices that are usually applied to Xiaomi devices that use Qualcomm Processor. fastboot edl zip fastboot edl v2 edl mode redmi note 3 download...
www.beritahuaja.com
Click to expand...
Click to collapse
Nothing happens. I just don't have access to fastboot mode
thomassolcia said:
Nothing happens. I just don't have access to fastboot mode
Click to expand...
Click to collapse
Did you try EDL like I linked?
Robert314 said:
Did you try EDL like I linked?
Click to expand...
Click to collapse
Flashing with MIFLASH in EDL mode requires authorization.
Only repair centers and certain developers have this authorization.
It is bricked.Only EDL paid account can help now.You chose clean all and lock option because it is selected by default.
Asking for future reference, if i choose clean all and lock option with a miui global stock rom, will it brick my phone? The phone came with global rom preinstalled and is named poco f3, not redmi k40.
ApexPrime said:
Asking for future reference, if i choose clean all and lock option with a miui global stock rom, will it brick my phone? The phone came with global rom preinstalled and is named poco f3, not redmi k40.
Click to expand...
Click to collapse
No, the error is to re-lock on a Chinese version.
thomassolcia said:
Hello guys, I was returning to stock rom through miflash, but the process was interrupted right at the beginning and I was unable to continue. I went to restart the cell phone to try to perform the process again, however when doing this the cellphone simply does not give the image, nor vibrates. I think that because it interrupted the process, the system image was corrupted, or something. Would you know of anything I can do to try to recover my cell phone? I can't access anything from him. The computer does not recognize it, and I cannot enter fastboot mode.
Click to expand...
Click to collapse
Have you unlocked bootloader?
minotavros said:
Have you unlocked bootloader?
Click to expand...
Click to collapse
"I was returning to stock rom"!!!
Hello everyone ... I am also a happy and content owner of the POCO F3 8/256 ... and I would like to ask something ... I tried to enter an SOS emergency number ... (of my wife) .. . and as soon as the configuration was done, he sent a message correctly to my wife ... that at the moment she was away from home ... (even if I read that she would also send the position) ... I tried again last night by tapping 5 consecutive times on the volume button and it does not send anything ... you know something about it
25 seconds to flash
NOSS8 said:
25 seconds to flash
Click to expand...
Click to collapse
maybe it ain't that obvious? hahah thats just like placing large zip file to the phone.
I ran into a similar issue long story short the screen was black and in dev manager recognised as qusb loader or something which i believe is EDL mode but the screen just remained black. I googled around and a certain developer assisted me so what i did is hold power and vol down for over a minute it must be over a minute or so and re entered back into fastboot and was able to flash global rom. The only issue now is i can install miui via twrp but if i try to install any fastboot Asop rom the phone immediately drops back into EDL mode with the black screen issue. so for now i am limited to EU roms.
sam00561 said:
I ran into a similar issue long story short the screen was black and in dev manager recognised as qusb loader or something which i believe is EDL mode but the screen just remained black. I googled around and a certain developer assisted me so what i did is hold power and vol down for over a minute it must be over a minute or so and re entered back into fastboot and was able to flash global rom. The only issue now is i can install miui via twrp but if i try to install any fastboot Asop rom the phone immediately drops back into EDL mode with the black screen issue. so for now i am limited to EU roms.
Click to expand...
Click to collapse
If you can enable fastboot mode, flash the original rom with Miflash.
NOSS8 said:
If you can enable fastboot mode, flash the original rom with Miflash.
Click to expand...
Click to collapse
Yes i have already done that the reason for my post was to help the original poster out who can try this method to get back into fastboot so he can flash stock again through mi Flash.
sam00561 said:
Yes i have already done that the reason for my post was to help the original poster out who can try this method to get back into fastboot so he can flash stock again through mi Flash.
Click to expand...
Click to collapse
Enter in EDL mode is easy but flashing with MIFLASH in EDL mode requires authorization.

[SOLVED] Hardbricked, but bootloops instead of "System got destroyed" text error.

so my ginkgo got hardbricked today.. i couldn't access fastboot and recovery mode. but it does bootloop instead of getting the text "System got destroyed"...
Anybody got a solution for this? I tried to flash TWRP to wipe my data, and use MiFlashTool to relock the bootloader as well as flash MIUI stock rom.
hellohell0 said:
so my ginkgo got hardbricked today.. i couldn't access fastboot and recovery mode. but it does bootloop instead of getting the text "System got destroyed"...
Click to expand...
Click to collapse
"System got destroyed" does not display on all types of bricks
hellohell0 said:
Anybody got a solution for this? I tried to flash TWRP to wipe my data, and use MiFlashTool to relock the bootloader as well as flash MIUI stock rom.
Click to expand...
Click to collapse
make sure the power button is not stuck
do not relock your bootloader (you have no chance of fixing it while locked,beside EDL)
try flashing VBMETA first, then see with a custom recovery
loopypalm said:
"System got destroyed" does not display on all types of bricks
make sure the power button is not stuck
do not relock your bootloader (you have no chance of fixing it while locked,beside EDL)
try flashing VBMETA first, then see with a custom recovery
Click to expand...
Click to collapse
Hello. Sorry I couldn't reply quicker due to busy week. I tried to flash TWRP through fastboot mode but no luck. So, flashing VBMETA would be useless too, Since fastboot couldn't recognize my phone (
Code:
fastboot devices
). Please note that I've had the USB driver installed for my phone.
hellohell0 said:
Hello. Sorry I couldn't reply quicker due to busy week. I tried to flash TWRP through fastboot mode but no luck. So, flashing VBMETA would be useless too, Since fastboot couldn't recognize my phone (
Code:
fastboot devices
). Please note that I've had the USB driver installed for my phone.
Click to expand...
Click to collapse
i'm not sure what could be the problem here (no enough data)
could be the usb cable
could be the usb port
could be the windows version/drivers ...
if you are 100% sure those are not the cause then your only left option is EDL
loopypalm said:
i'm not sure what could be the problem here (no enough data)
could be the usb cable
could be the usb port
could be the windows version/drivers ...
if you are 100% sure those are not the cause then your only left option is EDL
Click to expand...
Click to collapse
Just got back from my friend's house. Yes, the solution is EDL
My phone is back to normal now, but this would happen again since my friend told me that the eMMC might be corrupted.
Thank you for the help! I thought it was impossible since my phone won't fully recognized in the PC (It was called Android but with question mark)
Case closed.

Question Phone Hard Bricked. Tried EDL Flash, and it was successful but the phone doesn't boot.

I was flashing void ui through twrp and the flash was successful, I rebooted the recovery to go flash the firmware and format data but it didn't do it there was the TWRP logo and then it straight went to void UI logo the went straight to rom and was working fine, but to complete the clean flash steps I restarted the phone and it to stuck on the shutting down screen and never booted again.
The phone doesn't go to fastboot mode or recovery . I got the back panel open and put the phone into edl mode to edl flash, the flash was successful but the phone doesn't boot. The screen is blank. I can put the phone in edl mode again by shorting the pins on the motherboard . But no luck after that.
Any help.
DAFTKNIGHT said:
I was flashing void ui through twrp and the flash was successful, I rebooted the recovery to go flash the firmware and format data but it didn't do it there was the TWRP logo and then it straight went to void UI logo the went straight to rom and was working fine, but to complete the clean flash steps I restarted the phone and it to stuck on the shutting down screen and never booted again.
The phone doesn't go to fastboot mode or recovery . I got the back panel open and put the phone into edl mode to edl flash, the flash was successful but the phone doesn't boot. The screen is blank. I can put the phone in edl mode again by shorting the pins on the motherboard . But no luck after that.
Any help.
Click to expand...
Click to collapse
1st thing 1st, đi u check if all the hardware parts are working?
LinhBT said:
1st thing 1st, đi u check if all the hardware parts are working?
Click to expand...
Click to collapse
They were working till i rebooted the phone
You have an authorized edl account?
How did you get it?
Vagelis1608 said:
You have an authorized edl account?
How did you get it?
Click to expand...
Click to collapse
@AGENT_ZIRO on telegram does it remotely , i asked him to do it
DAFTKNIGHT said:
@AGENT_ZIRO on telegram does it remotely , i asked him to do it
Click to expand...
Click to collapse
Ah, ok, I see, thanks
There is a local guy that does it, so I won't be needing them, but thanks

Categories

Resources