I have a Xiaomi Note 8 Pro initially came with China Stable Rom V11.0.3.0.PGGCNXM. It was also unlocked.
I accidentally flashed Global Stable ROMV11.0.6.0.PGGMIXM via MiFlashTool and while it was successful, it rebooted to Recovery Mode with the message "This MIUI version can't be installed on this device".
After that, I pressed "Wipe All Data", so now the device is also locked.
Since there is no OS installed, I cannot access the device and consiquently to use Mi Unlock Tool properly to Unlock it again.
The device is now locked, without OS installed. However I can access Fastboot menu and Recovery mode.
Is there anyway to unlock the device in this state and flash it's original Rom again?
Please if you have anything to suggest that might help me, answer my question. I'm desperate. :crying:
Hmmm. Can you still access fastboot mode? If yes I recommend using miflash pro and flashing the correct rom for your device, or manually flashing all images via fastboot.
You've likely selected Clean all and lock (default setting) which flashed MIUI and locked the bootloader afterwards which bricked the device because of cross-region ROM flashing. Since you can't flash it with locked bootloader your only option is to take it to the service center.
@JuanM2020 @n0b0dy666 First of all, thank you guys for your suggestions.
Update: I tried to flash it's original Rom via MiFlash Pro, however when I connected my device on the final step, as for the SP tool to flash the Rom, my pc couldn't detect it. I even risked and disassembled the device to remove the battery in order to turn off the device, but it didn't work either. (Cdc & Vcom Mediatek drivers both installed properly on my pc).
The device is recognized by my computer when in Flashboot menu. However for the SP tool to work, it should be turned off, but recognizable from computer.
Before posting here, of course I went to a service center, but they told me because I tried to install Global Rom 11.0.06, while it's original Rom was China Stable Rom 11.0.03, I should wait for the 11.0.06, as a downgrade is not possible (not sure if it's true). We don't have an official Xiaomi Center in my county, where I go was the best chance I had.
Any other recommendations?
RenginaP said:
@JuanM2020 @n0b0dy666 First of all, thank you guys for your suggestions.
Update: I tried to flash it's original Rom via MiFlash Pro, however when I connected my device on the final step, as for the SP tool to flash the Rom, my pc couldn't detect it. I even risked and disassembled the device to remove the battery in order to turn off the device, but it didn't work either. (Cdc & Vcom Mediatek drivers both installed properly on my pc).
The device is recognized by my computer when in Flashboot menu. However for the SP tool to work, it should be turned off, but recognizable from computer.
Before posting here, of course I went to a service center, but they told me because I tried to install Global Rom 11.0.06, while it's original Rom was China Stable Rom 11.0.03, I should wait for the 11.0.06, as a downgrade is not possible (not sure if it's true). We don't have an official Xiaomi Center in my county, where I go was the best chance I had.
Any other recommendations?
Click to expand...
Click to collapse
If you can still access fastboot mode flash correct images manually.
E.g.:
Fastboot flash system system.img
Fastboot flash vendor vendor.img
Fastboot flash recovery recovery.img
Etc etc
JuanM2020 said:
If you can still access fastboot mode flash correct images manually.
E.g.:
Fastboot flash system system.img
Fastboot flash vendor vendor.img
Fastboot flash recovery recovery.img
Etc etc
Click to expand...
Click to collapse
So sorry for my late response. Is there any guide about manual flashing which I can follow for that?
RenginaP said:
So sorry for my late response. Is there any guide about manual flashing which I can follow for that?
Click to expand...
Click to collapse
https://www.xiaomigeek.com/flash-miui-fastboot-rom-using-command.html
Could you fix it?
Related
So i messed up when trying to update my watch and somehow deleted the firmware so my watch bootloops upon start-up, any way to fix this?
Im have the same problem. Im stuck in bootloop after trying to flash custom kernel. I can not rech recovery. Not original recovery or TWRP. Fastboot works. What to do?
Is there any restore image to flasH?
Here are three solutions in one answer, because you did not give quite enough info.
First, try holding the button on boot up. Hopefully that will get you into usb mode. If it works, download the sony software, and go to the help section, and download and install the update.
Option two,
Code:
adb reboot recovery
Or, download the version of twrp for your build as well as your original image, and use fastboot.
Code:
Fastboot boot twrp.img
then use twrp to install the factory zip. You can do this directly in fastboot too, but it is more difficult because fastboot only installs each image separately. If I knew what versions of software you had, I could help you find the images you need.
I have tried both fastboot flash and fastboot boot for both original recovery and also TWRP, but non of the recoverys will boot, not even with Fastboot boot.
The command lines says OK on my PC, It is getting downloaded, and it says it is booting / flashed [OKAY].
But all I get on my Smartwatch 3 is bootloop.
My Smartwatch 3 is OEM unlocked. I even tried to lock it, and unlock it again.
I have full contact with fastboot on my PC, all the commands are taken in and seems to work, but my smartwatch won't boot no system or no recoverys. Only USB-mode and Fastboot mode...
I have also tried to clear cache and userdata in fastboot after OEM Unlock.
I will try the Sony Software now. That is my last way out I Think.
The Sony PC Companion software from sony's website worked for me to save my smartwatch from bootloops . I just did a update and installed it over what was already on the smartwatch.
Thanks lekofraggle for quick answeres. I had no idea the PC Companion had this feature.
SimDroid, I am glad that helped. If it hadn't, the next step would be to flash an image through fastboot. That would be scary, because it sounds like your boot loader was corrupt. It's nice to know the usb and PcCompanion piece still worked. Another reason this watch is incredible.
Cheers.
does anyone have a download for the original (5.0.2 im guessing) ROM for this watch? I want off the rubbish 5.1.1 update before i am forced to sell the watch due to the terrible battery
The smartwatch works as it should now, original recovery and everything is back!
So, if i may go back to where it started?
I noticed now that I flashed the custom kernel for the watch built for wrong firmware. Im on 5.1.1, and there doesnt seem to be a developed shared kernel with all four cores unlocked for it.
Im also interested in where I can find those images to flash via fastboot as you mentioned lekofraggle
Hello guys,
my Oneplus 3 is hard bricked, I tried the methods in the Mega Unbrick guide, my device already gets shown as Qualcomm 9008 ... in Device Manager, so I started the MSM DownloadTool and it flashed anything without errors. But when the phone reboots I get a black screen and the white led is on.
I can't even boot to stock recovery (Volume down + power doesn't work and rebooting to recovery through fastboot doesn't work, too....) my bootloader is locked and all attempts to unlock the bootloader are failing with the error "remote: oem unlock is not allowed"
So at the moment I'm stuck in fastboot and nothing else works -.-
Can someone please help me?
The unbrick tool has an old firmware, can I replace the files with files from a newer firmware?
Thanks!
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Puddi_Puddin said:
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Click to expand...
Click to collapse
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
min-dfreak said:
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
Click to expand...
Click to collapse
Ye thats the only thing you can currently do... May i ask what you have done how did it get bricked?
I just updated AICP ota and after flashing the update my phone didn't boot up. The screen went black immediately.
So I thought that it is maybe a Problem with the ROM and I tried to go back to stock.
Flashed the stock recovery and locked the bootloader, but I couldn't boot to the stock recovery.
There it started...
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
drmuruga said:
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
Click to expand...
Click to collapse
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
min-dfreak said:
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
Click to expand...
Click to collapse
Never but never lock your bootloader...
If recovery, boot or system partition is modified. There's no harm in re locking otherwise..
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Dsn Fouad said:
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Click to expand...
Click to collapse
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
SivaMaxwell said:
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
Click to expand...
Click to collapse
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Dsn Fouad said:
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Click to expand...
Click to collapse
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
SivaMaxwell said:
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
Click to expand...
Click to collapse
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Dsn Fouad said:
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Click to expand...
Click to collapse
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Thanks i will download and give it a try
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Dsn Fouad said:
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Click to expand...
Click to collapse
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
SivaMaxwell said:
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
Click to expand...
Click to collapse
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Dsn Fouad said:
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Click to expand...
Click to collapse
Even if the bootloader is locked, you can boot into the current rom and unlock simply by going to advanved options.
It is a very simple process.
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
Two quick questions:
1.The phone died on its self without your intervention or...?
2.Have you tried to flash the stock firmware via MiFlash , while the phone is in edl mode(the command is: fastboot oem edl)?
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
I think you are confusing some things here; adb is not an option now so you can´t boot device normally and also you said "fastboot edl" but they are different modes.
While in fastboot how did you try booting to TWRP image? (you said through adb but this is not right)
Can you get to fastboot? (hold vol down while booting, should see a rabbit on the screen)
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
When your phone is in EDL mode(you won't be seeing any logo on your phone ,only black screen) it's absolutely normal to see the device as COM port , because the device is in another factory mode. And there is no problem flashing stock ,when your phone is seen as COM port. So if you can't flash the stock firmware in fastboot mode or EDL mode , maybe you have a hardware issue. To be sure -take a screenshot of the error in MiFalsh when the phone is in edl Mode (seen as a COM port) and you try to flash the stock firmware.
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
pocchio said:
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
Click to expand...
Click to collapse
Here is the stock firmware from Xiaomi site:
https://en.miui.com/getrom-354.html?m=yes&mobile=2
Don't worry that it says MIUI , the firmware is Android One , they just forgot to change the name from MIUI to Android One , I have already tried it ,and I can confirm that it's 100% stock Android One firmware , good luck!
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
pocchio said:
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
Click to expand...
Click to collapse
I will give a solution in a minute
EDIT: Are you sure your bootloader is unlocked? (fastboot oem unlock)
You have two choices , you need to find an older version of MiFlash beta , i'll give you a video :
https://m.youtube.com/watch?v=-7O1Svib14g
In the video description you can find a link for the MiFlash beta ,I hope it helps.
If not , you'll have to consider the Testpoint unbrick method , there are several guides.
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
pocchio said:
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
Click to expand...
Click to collapse
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
nikoman1987 said:
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
Click to expand...
Click to collapse
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
pocchio said:
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
Click to expand...
Click to collapse
the command is: fastboot oem get-product-model
nikoman1987 said:
the command is: fastboot oem get-product-model
Click to expand...
Click to collapse
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
pocchio said:
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
Click to expand...
Click to collapse
tried the command too, it doesn't work.
So test point doesn't work too.. That's bad news
EDIT: fastboot getvar product command works , you can try it
And another question , have you tried to boot with patched boot.IMG ?
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
You need a recovery to flash , which has a specific partition in the phone storage. You can flash only via fastboot . You need to boot into recovery , so try with a patched boot image for your version of the rom
---------- Post added at 02:47 PM ---------- Previous post was at 02:38 PM ----------
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
So the last resort , we'll try to flash the ROM that I have mentioned before via fastboot. Place the zip file GM 1.1 in your PC (it has to be in the same directory as your adb and fastboot tools)
then open cmd and run the command
fastboot flash (the full name of the zip).zip
and hit enter
maybe that will solve it
And if this doesn't help again... type these fastboot commands :
fastboot format userdata
fastboot format system
fastboot format cache
fastboot format vendor
fastboot format recovery
fastboot format boot
then try again to reflash the stock rom (first try in edl mode ,if this doesn't do anything ,you'll have to format everything via fastboot commands again ,and try to flash the ROM in fastboot mode)
And if this doesn't help too... Then you're free to hit that ? in the ground hahahah (just kidding)
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
pocchio said:
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
Click to expand...
Click to collapse
which version of the firmware you are flashing? 10.0.9.0 or another version , so I can send you a link and walk you through the procedure.
And when you flashed the GM 1.1 the boot screen didn't changed from Android one? (the GM 1.1 version is a MIUI stock port and has to change your boot screen to black screen with white MI logo on it) It is very important to know
One of my friends told me to try this: just open the directory of the stock firmware , navigate to flash_all.bat and run the bat file (NOT THE FLASH_ALL_LOCK!!!) and wait for the end of the process. He had a similar problem , and it worked. He explained that for any reason , the recovery was the problem , because it was flashed in the boot partition. When you use flash_all.bat The file will erase all partitions and rewrite them. MiFlash won't , so try that
hello xda friends!
after a very long time i've got my old xiomi a2 lite display repaired
the phone boots to twrp 3.3.1
beyond that my phone is completely empty
now i would like to give this phone away so i want to return it to stock
but it has been quite a while, i have no idea how to proceed anymore
so far all attempts at following several guides failed with red errors installing the zipped roms
can someone walk me through the process of returning my phone back to stock android
maybe even with some working links (since many of those i found were sadly dead), please?
tHISiSfINE said:
hello xda friends!
after a very long time i've got my old xiomi a2 lite display repaired
the phone boots to twrp 3.3.1
beyond that my phone is completely empty
now i would like to give this phone away so i want to return it to stock
but it has been quite a while, i have no idea how to proceed anymore
so far all attempts at following several guides failed with red errors installing the zipped roms
can someone walk me through the process of returning my phone back to stock android
maybe even with some working links (since many of those i found were sadly dead), please?
Click to expand...
Click to collapse
Download Official ROMs for Xiaomi Mi A2 Lite - Xiaomi Firmware
After the success of Xiaomi’s Mi A1 smartphone, it was very much expected that soon or later we’ll get its updated version. We already have a lot of fastboot and full OTA ROM updates available for download from official MIUI website. For your convenience we’ve collected the full list of the...
xiaomifirmware.com
You can download RECOVERY ROM (this is for flashing the rom via recovery)
or you can get FASTBOOT ROM ( this is for flashing the stuff via fastboot mode)
If you go with Recovery ROM then u will just have to download the zip file (latest preffered) to your laptop/pc. Then plug in your phone to your pc with an usb and transfer the zip file to your mobile device. Then go to INSTALL section and navigate to the directory where you transferred the file to and Flash it.
For installing the rom via fastboot first download one of the FASTBOOT ROM from the link i gave you (latest is preffered). After this extract the zip file on your pc. Go to the extracted folder. Now plug ur phone to the pc with usb and go to the fastboot mode (VOL DOWN + POWER BUTTON to go to fastboot. Or if you are on TWRP just go to the Reboot section and reboot the Bootloader/Fastboot from there) .Double click on the flash_all.bat (if on windows) or flash_all.sh (if on linux) it should flash all the stuff you need into it's place. Make sure u are on Fastboot Mode before running the flash_all file.
sorry, i suck at explaining
thank you.
it worked with fastboot and i am back to stock android!
tHISiSfINE said:
thank you.
it worked with fastboot and i am back to stock android!
Click to expand...
Click to collapse
no problem :good:
Hi all,
I hope someone will be able to guide me as how to recover from this.
So today I tried flashing my POCO F3 with MIUI 14 (xiaomi.eu_multi_HMK40_POCOF3_V14.0.4.0.TKHCNXM_v14-13) from the stock version MIUI 12.
I first successfuly unlocked the bootloader using MiUnlock. I then unlocked the developer options , usb unbugging etc. again on the fresh phone.
I also had USB / ADB and fastloader drivers installed.
I downloaded xiaomi.eu_multi_HMK40_POCOF3_V14.0.4.0.TKHCNXM_v14-13 , phone was already in fastboot and connected to the computer so run 'windows fastboot first install with data format' as an administrator which opened the cmd , after agreeing it started flashing the first few files successfully but when it gets to " Sending 'cmnlib64_ab' (504 KB) " the process just stopped there and it has been like this for around 30 mins - no error ...simply stuck on this step .....
I am not sure on what to do now to avoid bricking my phone, should I leave it connected ? Disconnect it and try flashing it again ? Download an older version of Xiaomi.Eu ROM (e.g MIUI 13 ) ?
Leave it connected for about 1 hour or so until you get success or error confirmation. If failed just reboot to system. If system failed to show up then go to fastboot again and install xiaomi.eu a12 version.
This is exactly why I hate fastboot method and always install rom from twrp
Flash 14.0.5 via orangefox recovery.
I left it overnight and nothing happened . I disconnected the phone and it rebooted ok. I am kind of worried about trying again. Is the twrp method safer ?
Just discovered that I stupidly set the "USB debugging (Security settings) on but I forgot to turn on "USB debugging" which is a few lines above in settings. Could that be what has stopped the process?
Phone should flash fine even if debugging is off. I would recommend you to make sure that the cable doesnt even move an inch during the whole flashing process as that sometimes interrupts it especially if you have a loose port.
I just switched the usb port from the back of the pc (which I think are USB 3.0) to the front panel of the PC (I suspect USB 2.0 ) and tried flashing the MIUI 14 from yesterday again - It worked !!!!
*Deleted
Hi,
You could check out my post,
Fastboot not working in Windows 11 [Resolved]
Hello! I cant get my Windows 11 virtual machine to detect my Xiaomi 12 when its in Fastboot mode. Does any one happen to have any ideas to solve this? It shows up as 'Android' in device manager. I've also attempted to install a drivers manually...
forum.xda-developers.com
I hope it might help for the future
Hi...
Is it possible to flash a ROM that says "...V12.0.6....V12-10" for example, on a device that shipped with MIUI 11 Android 10, directly, without first updating the device to MIUI 12 normally?
Carl_OX said:
Hi...
Is it possible to flash a ROM that says "...V12.0.6....V12-10" for example, on a device that shipped with MIUI 11 Android 10, directly, without first updating the device to MIUI 12 normally?
Click to expand...
Click to collapse
you can do if you flash the fastboot version by mi flash tool, and your bootloader is unlocked.
mogamycool said:
you can do if you flash the fastboot version by mi flash tool, and your bootloader is unlocked.
Click to expand...
Click to collapse
Thanks... I really appreciate the early reply.
But can't I do this using the recovery method? And also must the android and miui versions of both the global stock rom and custom rom be the same?
Nevermind...thanks for your help
if you want to flash specific version of android, then you need unlocked bootloader and mi flash tool, otherwise make updater app do its job. and no need for the global stock rom and custom rom be the same. just put in your mind to backup your data .
mogamycool said:
if you want to flash specific version of android, then you need unlocked bootloader and mi flash tool, otherwise make updater app do its job. and no need for the global stock rom and custom rom be the same. just put in your mind to backup your data .
Click to expand...
Click to collapse
Thanks boss