Question POCO F3 gets stuck during flashing with MIUI 14 XIAOMI.EU - Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40

Hi all,
I hope someone will be able to guide me as how to recover from this.
So today I tried flashing my POCO F3 with MIUI 14 (xiaomi.eu_multi_HMK40_POCOF3_V14.0.4.0.TKHCNXM_v14-13) from the stock version MIUI 12.
I first successfuly unlocked the bootloader using MiUnlock. I then unlocked the developer options , usb unbugging etc. again on the fresh phone.
I also had USB / ADB and fastloader drivers installed.
I downloaded xiaomi.eu_multi_HMK40_POCOF3_V14.0.4.0.TKHCNXM_v14-13 , phone was already in fastboot and connected to the computer so run 'windows fastboot first install with data format' as an administrator which opened the cmd , after agreeing it started flashing the first few files successfully but when it gets to " Sending 'cmnlib64_ab' (504 KB) " the process just stopped there and it has been like this for around 30 mins - no error ...simply stuck on this step .....
I am not sure on what to do now to avoid bricking my phone, should I leave it connected ? Disconnect it and try flashing it again ? Download an older version of Xiaomi.Eu ROM (e.g MIUI 13 ) ?

Leave it connected for about 1 hour or so until you get success or error confirmation. If failed just reboot to system. If system failed to show up then go to fastboot again and install xiaomi.eu a12 version.
This is exactly why I hate fastboot method and always install rom from twrp

Flash 14.0.5 via orangefox recovery.

I left it overnight and nothing happened . I disconnected the phone and it rebooted ok. I am kind of worried about trying again. Is the twrp method safer ?

Just discovered that I stupidly set the "USB debugging (Security settings) on but I forgot to turn on "USB debugging" which is a few lines above in settings. Could that be what has stopped the process?

Phone should flash fine even if debugging is off. I would recommend you to make sure that the cable doesnt even move an inch during the whole flashing process as that sometimes interrupts it especially if you have a loose port.

I just switched the usb port from the back of the pc (which I think are USB 3.0) to the front panel of the PC (I suspect USB 2.0 ) and tried flashing the MIUI 14 from yesterday again - It worked !!!!

*Deleted

Hi,
You could check out my post,
Fastboot not working in Windows 11 [Resolved]
Hello! I cant get my Windows 11 virtual machine to detect my Xiaomi 12 when its in Fastboot mode. Does any one happen to have any ideas to solve this? It shows up as 'Android' in device manager. I've also attempted to install a drivers manually...
forum.xda-developers.com
I hope it might help for the future

Hi...
Is it possible to flash a ROM that says "...V12.0.6....V12-10" for example, on a device that shipped with MIUI 11 Android 10, directly, without first updating the device to MIUI 12 normally?

Carl_OX said:
Hi...
Is it possible to flash a ROM that says "...V12.0.6....V12-10" for example, on a device that shipped with MIUI 11 Android 10, directly, without first updating the device to MIUI 12 normally?
Click to expand...
Click to collapse
you can do if you flash the fastboot version by mi flash tool, and your bootloader is unlocked.

mogamycool said:
you can do if you flash the fastboot version by mi flash tool, and your bootloader is unlocked.
Click to expand...
Click to collapse
Thanks... I really appreciate the early reply.
But can't I do this using the recovery method? And also must the android and miui versions of both the global stock rom and custom rom be the same?
Nevermind...thanks for your help

if you want to flash specific version of android, then you need unlocked bootloader and mi flash tool, otherwise make updater app do its job. and no need for the global stock rom and custom rom be the same. just put in your mind to backup your data .

mogamycool said:
if you want to flash specific version of android, then you need unlocked bootloader and mi flash tool, otherwise make updater app do its job. and no need for the global stock rom and custom rom be the same. just put in your mind to backup your data .
Click to expand...
Click to collapse
Thanks boss

Related

Oneplus 3 Bricked - Unbrick doesn't work...

Hello guys,
my Oneplus 3 is hard bricked, I tried the methods in the Mega Unbrick guide, my device already gets shown as Qualcomm 9008 ... in Device Manager, so I started the MSM DownloadTool and it flashed anything without errors. But when the phone reboots I get a black screen and the white led is on.
I can't even boot to stock recovery (Volume down + power doesn't work and rebooting to recovery through fastboot doesn't work, too....) my bootloader is locked and all attempts to unlock the bootloader are failing with the error "remote: oem unlock is not allowed"
So at the moment I'm stuck in fastboot and nothing else works -.-
Can someone please help me?
The unbrick tool has an old firmware, can I replace the files with files from a newer firmware?
Thanks!
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Puddi_Puddin said:
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Click to expand...
Click to collapse
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
min-dfreak said:
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
Click to expand...
Click to collapse
Ye thats the only thing you can currently do... May i ask what you have done how did it get bricked?
I just updated AICP ota and after flashing the update my phone didn't boot up. The screen went black immediately.
So I thought that it is maybe a Problem with the ROM and I tried to go back to stock.
Flashed the stock recovery and locked the bootloader, but I couldn't boot to the stock recovery.
There it started...
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
drmuruga said:
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
Click to expand...
Click to collapse
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
min-dfreak said:
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
Click to expand...
Click to collapse
Never but never lock your bootloader...
If recovery, boot or system partition is modified. There's no harm in re locking otherwise..
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Dsn Fouad said:
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Click to expand...
Click to collapse
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
SivaMaxwell said:
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
Click to expand...
Click to collapse
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Dsn Fouad said:
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Click to expand...
Click to collapse
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
SivaMaxwell said:
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
Click to expand...
Click to collapse
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Dsn Fouad said:
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Click to expand...
Click to collapse
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Thanks i will download and give it a try
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Dsn Fouad said:
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Click to expand...
Click to collapse
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
SivaMaxwell said:
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
Click to expand...
Click to collapse
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Dsn Fouad said:
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Click to expand...
Click to collapse
Even if the bootloader is locked, you can boot into the current rom and unlock simply by going to advanved options.
It is a very simple process.

i have relocked with twrp and can't re unlock

hello,
i have a problem with my redmi note 5 whyred.
it's a global.
I had unlocked, installed twrp, tried some custom roms, but i wanted to come back to miui, so i have flashed by miflash, and and unfortunately I forgot to tick the box "flash all" , then it has relock (with twrp and custom rom)...
Now i have the rom beta global 8.10.11 , it works well but when i try to re-unlock by miunlock tool, it stop at 99% with " couldn't unlock error (-1)"
I have enabled developper options, oem unlock, usb debugging, etc... tried some differents drivers and differents computer with windows 7 or 10, some mi-unlock versions.... but it always stop at 99%
someone could help me? thanks
tofclaire said:
hello,
i have a problem with my redmi note 5 whyred.
it's a global.
I had unlocked, installed twrp, tried some custom roms, but i wanted to come back to miui, so i have flashed by miflash, and and unfortunately I forgot to tick the box "flash all" , then it has relock (with twrp and custom rom)...
Now i have the rom beta global 8.10.11 , it works well but when i try to re-unlock by miunlock tool, it stop at 99% with " couldn't unlock error (-1)"
I have enabled developper options, oem unlock, usb debugging, etc... tried some differents drivers and differents computer with windows 7 or 10, some mi-unlock versions.... but it always stop at 99%
someone could help me? thanks
Click to expand...
Click to collapse
did you bind account in developers options?
yes of course, i have already unlocked several xiaomi...i don't understand this error...
I think it's related to having re-locked with twrp and a custom rom, but i don't know what to do for re-unlocking now... however the rom 8.11.8 works well...
tofclaire said:
I think it's related to having re-locked with twrp and a custom rom, but i don't know what to do for re-unlocking now... however the rom 8.11.8 works well...
Click to expand...
Click to collapse
Can you try to run the unlocking tool as an Administrator?
yes, and tried with differents drivers, and with or without unsigned ,windows 7 or 10...
tofclaire said:
yes, and tried with differents drivers, and with or without unsigned ,windows 7 or 10...
Click to expand...
Click to collapse
As admin did not work?
Try an earlier version of the tool...sometimes it helps as they introduce changes...
not works as admin and i ve tried several older versions... ? and several computer...
however my mi account works well...i can locate my device etc...
any advices? ?
Try accessing EDL mode.
tofclaire said:
any advices?
Click to expand...
Click to collapse
well
can you try
1. fastboot boot recovery.img ? (use orangefox recovery)
and ... try flashing "recovery.img" TAKEN FROM FASTBOOT ROM of the MIUI (same version u are running now)
OR
2. flash fasboot rom, WIPE ALL , this will restore the original recovery and try unlocking the fone now!
Nitin890 said:
Try accessing EDL mode.
Click to expand...
Click to collapse
edl mode is locked now with locked bootloader (since rom 8.1), no?
YasuHamed said:
well
can you try
1. fastboot boot recovery.img ? (use orangefox recovery)
and ... try flashing "recovery.img" TAKEN FROM FASTBOOT ROM of the MIUI (same version u are running now)
OR
2. flash fasboot rom, WIPE ALL , this will restore the original recovery and try unlocking the fone now!
Click to expand...
Click to collapse
can't flash fastboot rom by miflah , it says "no allowed with locked bootloader... i will try your "1." but i can boot on orangefox if my bootloader is locked ?
i have already miui recovery
tofclaire said:
edl mode is locked now with locked bootloader (since rom 8.1), no?
Click to expand...
Click to collapse
Here are somethings u may try:
Reinstall mi unlock with latest one.
Check all the drivers.
Ensure that ur phone and pc must be on same Ip address before unlocking.
If using windows 10 you must turn off signed driver verification by pressing and holding shift key while rebooting pc selecting troubleshoot startup ( summit like that) then signed driver verification off its option 7 ( pressing f7 to select) when pc reboots install driver again this time a message pops up and says driver unsigned do you wish install select install anyway now when running the unlock program( as administrator).
I hope these things will help otherwise wait for 7 to 9 days and then try unlocking.
Nitin890 said:
Here are somethings u may try:
Reinstall mi unlock with latest one.
Check all the drivers.
Ensure that ur phone and pc must be on same Ip address before unlocking.
If using windows 10 you must turn off signed driver verification by pressing and holding shift key while rebooting pc selecting troubleshoot startup ( summit like that) then signed driver verification off its option 7 ( pressing f7 to select) when pc reboots install driver again this time a message pops up and says driver unsigned do you wish install select install anyway now when running the unlock program( as administrator).
I hope these things will help otherwise wait for 7 to 9 days and then try unlocking.
Click to expand...
Click to collapse
how can i check if phone and pc are on same ip ?
no more luck...always "couldn't unlock" ....
i don't understand... even i have re-locked by flashing miui with twrp and a custom rom, my phone works well. I have miui recovery, i have re-flashed miui with recovery miui assistant and mi pc suite. I can reset by miui recovery, i can update all friday the beta rom, my miui account is ok for unlocking...
tofclaire said:
how can i check if phone and pc are on same ip ?
Click to expand...
Click to collapse
Connect pc and phone to same network then bind ur phone to account and try unlocking.
Hope this works.

[Serious]Note 5 pro (Indian Variant)|Unable to boot any rom. [Help pls]

Today morning, I started facing bootloops on my whyred (running Pixel Experience pie latest).I clean flashed PE but couldn't boot into it. Phone would be stuck in bootloops. I changed roms to Potato OS,AICP,Descandent,Syberia,RR etc. but none could boot. All of them would get stuck in boot loop. ( I clean flashed all of them, wiping even my internal storage each time) Then I tried clean flashing Global MIUI latest stable, it boots but my sim cards are not detected and wifi doesnt turn on.Therefore, I was unable to log in to my mi account to verify the device.I tthen downloaded the latest stable MIUI (global) fastboot rom,using the mi flash tool i tried flashing, mi flash tool gave an error:
Code:
Flash antirbpass error
I checked the logs and it said:
Code:
echo current device antirollback version is greater than this package.
I am on anti 4, the rom is anti 4 compliant...why this error. Please help!
Also why was every other rom bootlooping?
Edit1: I still have access to fastboot and TWRP.
Edit2: On the latest Indian beta, It says my IMEI and mac address is not available ( possible curroption) that explains the sim card and wifi not working. Any fix for this?
Edit3: I am now able to boot properly into MIUI (latest Indian developer build) I just need to repair my IMEI and Mac now...has any1 got any idea on how I am supposed to fix it?
rtm2000 said:
Today morning, I started facing bootloops on my whyred (running Pixel Experience pie latest).I clean flashed PE but couldn't boot into it. Phone would be stuck in bootloops. I changed roms to Potato OS,AICP,Descandent,Syberia,RR etc. but none could boot. All of them would get stuck in boot loop. ( I clean flashed all of them, wiping even my internal storage each time) Then I tried clean flashing Global MIUI latest stable, it boots but my sim cards are not detected and wifi doesnt turn on.Therefore, I was unable to log in to my mi account to verify the device.I tthen downloaded the latest stable MIUI (global) fastboot rom,using the mi flash tool i tried flashing, mi flash tool gave an error:
Code:
Flash antirbpass error
I checked the logs and it said:
Code:
echo current device antirollback version is greater than this package.
I am on anti 4, the rom is anti 4 compliant...why this error. Please help!
Also why was every other rom bootlooping?
Edit1: I still have access to fastboot and TWRP.
Edit2: On the latest Indian beta, It says my IMEI and mac address is not available ( possible curroption) that explains the sim card and wifi not working. Any fix for this?
Edit3: I am now able to boot properly into MIUI (latest Indian developer build) I just need to repair my IMEI and Mac now...has any1 got any idea on how I am supposed to fix it?
Click to expand...
Click to collapse
No participations yet...hmm...guys??
rtm2000 said:
No participations yet...hmm...guys??
Click to expand...
Click to collapse
Just be patient. This isn't a regular bug/error that can be easily solved.
You we're running PE ROM without problems, what did you do in your device that started to bootloop?
Letrix said:
Just be patient. This isn't a regular bug/error that can be easily solved.
You we're running PE ROM without problems, what did you do in your device that started to bootloop?
Click to expand...
Click to collapse
Thanks for replying...
I did nothing, literally nothing...I just kept my phone for overnight charging and found it bootlooping in the morning. (It may have been running the whole night..)
ON another note, flashing the latest miui global stable via mi flash tool gives the error : Flash antirbpass error
I am on anti 4 , the rom I am trying to flash is anti 4 too...then why doesn't it let me flash?
...........?
rtm2000 said:
Thanks for replying...
I did nothing, literally nothing...I just kept my phone for overnight charging and found it bootlooping in the morning. (It may have been running the whole night..)
ON another note, flashing the latest miui global stable via mi flash tool gives the error : Flash antirbpass error
I am on anti 4 , the rom I am trying to flash is anti 4 too...then why doesn't it let me flash?
Click to expand...
Click to collapse
If you have adb and fastboot installed system wide, uninstall it . Reinstall drivers from xiaomi miflash and try again. It looks like your efs partition has been corrupted. If you have twrp backup of stock rom, use it.
arunmohan16 said:
If you have adb and fastboot installed system wide, uninstall it . Reinstall drivers from xiaomi miflash and try again. It looks like your efs partition has been corrupted. If you have twrp backup of stock rom, use it.
Click to expand...
Click to collapse
Thanks for your reply.
Actually, I don;t have the backup of my EFS partition with me. Is there any other way?
___________________________?

Locked Bootloader, No access to Operating System

I have a Xiaomi Note 8 Pro initially came with China Stable Rom V11.0.3.0.PGGCNXM. It was also unlocked.
I accidentally flashed Global Stable ROMV11.0.6.0.PGGMIXM via MiFlashTool and while it was successful, it rebooted to Recovery Mode with the message "This MIUI version can't be installed on this device".
After that, I pressed "Wipe All Data", so now the device is also locked.
Since there is no OS installed, I cannot access the device and consiquently to use Mi Unlock Tool properly to Unlock it again.
The device is now locked, without OS installed. However I can access Fastboot menu and Recovery mode.
Is there anyway to unlock the device in this state and flash it's original Rom again?
Please if you have anything to suggest that might help me, answer my question. I'm desperate. :crying:
Hmmm. Can you still access fastboot mode? If yes I recommend using miflash pro and flashing the correct rom for your device, or manually flashing all images via fastboot.
You've likely selected Clean all and lock (default setting) which flashed MIUI and locked the bootloader afterwards which bricked the device because of cross-region ROM flashing. Since you can't flash it with locked bootloader your only option is to take it to the service center.
@JuanM2020 @n0b0dy666 First of all, thank you guys for your suggestions.
Update: I tried to flash it's original Rom via MiFlash Pro, however when I connected my device on the final step, as for the SP tool to flash the Rom, my pc couldn't detect it. I even risked and disassembled the device to remove the battery in order to turn off the device, but it didn't work either. (Cdc & Vcom Mediatek drivers both installed properly on my pc).
The device is recognized by my computer when in Flashboot menu. However for the SP tool to work, it should be turned off, but recognizable from computer.
Before posting here, of course I went to a service center, but they told me because I tried to install Global Rom 11.0.06, while it's original Rom was China Stable Rom 11.0.03, I should wait for the 11.0.06, as a downgrade is not possible (not sure if it's true). We don't have an official Xiaomi Center in my county, where I go was the best chance I had.
Any other recommendations?
RenginaP said:
@JuanM2020 @n0b0dy666 First of all, thank you guys for your suggestions.
Update: I tried to flash it's original Rom via MiFlash Pro, however when I connected my device on the final step, as for the SP tool to flash the Rom, my pc couldn't detect it. I even risked and disassembled the device to remove the battery in order to turn off the device, but it didn't work either. (Cdc & Vcom Mediatek drivers both installed properly on my pc).
The device is recognized by my computer when in Flashboot menu. However for the SP tool to work, it should be turned off, but recognizable from computer.
Before posting here, of course I went to a service center, but they told me because I tried to install Global Rom 11.0.06, while it's original Rom was China Stable Rom 11.0.03, I should wait for the 11.0.06, as a downgrade is not possible (not sure if it's true). We don't have an official Xiaomi Center in my county, where I go was the best chance I had.
Any other recommendations?
Click to expand...
Click to collapse
If you can still access fastboot mode flash correct images manually.
E.g.:
Fastboot flash system system.img
Fastboot flash vendor vendor.img
Fastboot flash recovery recovery.img
Etc etc
JuanM2020 said:
If you can still access fastboot mode flash correct images manually.
E.g.:
Fastboot flash system system.img
Fastboot flash vendor vendor.img
Fastboot flash recovery recovery.img
Etc etc
Click to expand...
Click to collapse
So sorry for my late response. Is there any guide about manual flashing which I can follow for that?
RenginaP said:
So sorry for my late response. Is there any guide about manual flashing which I can follow for that?
Click to expand...
Click to collapse
https://www.xiaomigeek.com/flash-miui-fastboot-rom-using-command.html
Could you fix it?

Question Bricked while flashing Mi Pad 5 from Chinese to Global ROM

Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
chrwo said:
Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
Click to expand...
Click to collapse
Try fastboot method without bootloader lock
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
TWRP is not required to flash the global ROM.
Just specify the unzipped global ROM as the working directory of MiFlash.
try flashing fastboot rom using miflash tool
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Mi Pad 5 didn't have recovery partition, since it use A/B structure. You must execute fastboot boot recovery.img and after that install recovery to RAMdisk.
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Whered you even get twrp? Had an error while flashing from cn to global as well about sparse super failed. Then tried reflashing but i got the same error as you had and all i did was reboot the tablet in fastboot while it was still in fastboot and after that it flashed successfully even though it threw out am error flash is not done but the tablet rebooted hy itself and then booted up after a minute or two. Almost gave me a heart attack while i was at it
Edit: seems you flashed it successfully already thats good. Fastboot can be clunky on ryzen sometimes, i remeber back on mi a2 had to use a hub instead of directly connecting my phone to my ryzen pc for fastboot to work properly and not get stuck while flashing. But now i can connect directly after switching to a b450motherboard, was using a b350 before
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
chrwo said:
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
Click to expand...
Click to collapse
It would be great if you can make a step-by-step guide on how to do this. Thank you.
puleen said:
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
Click to expand...
Click to collapse
prob just driver problems, i use ryzen and it works fine.
Don't know if I need to create a new thread. After the unlocking, I tried to change the region from RU to CN and got the same problem after a "successful" update as chrwo with "Mismatching image and device" error and fastboot mode. Then I tried to flash global version and the device error is gone but I still have the fastboot mode. Recovery from MiToolv2 doesn't help either, after successful recovery tablet still goes only to fastboot.
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Choochter said:
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
Click to expand...
Click to collapse
Not work for me.
But when I try with Miflash tool and anoter Rom (newest), it worked
Critical Hit said:
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Click to expand...
Click to collapse
I meer the same errỏr when I use Intel PC.
So, I dont think this a problem of Ryzen
i also brick the device using mi-flash sucking program. i finally using fastboot command flashing which copying from the stock rom "flash_all.bat" file.
So we can't lock the bootloader after installing the global rom?

Categories

Resources