good evening
I have been trying to return to stock miui from Pixel Experience since yesterday but get this error every time I try to flash the Firmware and do not know what I can do about it. I would be happy if somebody knew what this error is from and what might fix it.
Same problem. Don't try more things because you will brick your phone like mine.
Thanks for your reply. What did you do that bricked your Phonem? This way I know what to avoid. Thanks you in advance
As you are sure your device is a eea one, try with this last official stable firmware : Version: V13.0.7.0.SKHEUXM
You can find it here https://new.c.mi.com/global/miuidownload/detail/device/1900394
Fastboot version here at bottom : https://xiaomifirmwareupdater.com/miui/alioth/stable/V13.0.7.0.SKHEUXM/
Or https://bigota.d.miui.com/V13.0.7.0...EUXM_20220627.0000.00_12.0_eea_e461331a7d.tgz
Thanks you so much I will try that
and i did not mention this but I started this whole project of returning to miui because my poco was and still is in a bootloop and is only accessible over fastboot, not recovery and even though it sometimes gets to the system it almost instantly crashes and reboots
Still the Same Error unfortunatelly
nockcx said:
and i did not mention this but I started this whole project of returning to miui because my poco was and still is in a bootloop and is only accessible over fastboot, not recovery and even though it sometimes gets to the system it almost instantly crashes and reboots
Click to expand...
Click to collapse
Ok,
Do you have any idea what you did that may have caused this bootloop ?
Have you used any Qualcomm Tools or any soft in EDL mode ?
No, I did not do anything that would mess with the system to my knowledge . which is why i really do not know what to do. Can This Error occur because of a USB 3.0 used to flash? The Phone even tries to reboot when it is detected as a Fastboot device, maybe This has Something to do with it. Maybe it loses the Connection and therefore the flashing process stops. Are there possible ways to fix This?
Try with the latest android platform tools.
Put the content of platform tools archive in the fastboot folder and launch flash_all.bat don't use flash_all_lock
Still the Same Error . Can This be because of a Driver or a hardware issue?
i had similar issues but with the super partition when trying to flash from cmd.
flashing with miflash instead solved it.
It doesnt seem to make any difference to the error whether i flash it via cmd or miflash
nockcx said:
Still the Same Error . Can This be because of a Driver or a hardware issue?
Click to expand...
Click to collapse
Maybe : So as you can try with other PC, USB cable, USB connector, reinstall USB drivers...
I already tried with two Notebooks, I will try again tomorrow with another PC and installing USB drivers again. Thank you
You could try redownloading the MIUI ROM... you got it from xiaomifirmwareupdater.com right?
And yes ^^, try other PCs/laptops and other USB-cables.
Just please make sure
Unfortunately, Fastboot-Flashing is a gamble. It's not a solid protocol. It has zero protection against sudden USB-connection loss.
And manufacturers like Xiaomi go out of their way and block Qualcomm's EDL Mode, which is the only way to recover your phone in case Fastboot Mode stops working, because that Mode itself can also get damaged.
Fixed - first flash a miui recovery rom from twrp make sure the rom version lower than the latest one, now flash and boot miui , now just update from miui updater once you updated to the latest version , now try to flash the fastboot rom that you trying to flash, it should work.
I cant access a bootloader like TWRP because the phone still keeps rebooting after a couple of seconds in the bootloader so i cant really do much. I only have access to fastboot
nockcx said:
just flash a custom vbmeta and then install a custom recovery in to the boot partition like fastboot flash boot ....flash both the slots boot_a and boot_b the run fastboot reboot recovery do all this with latest platform tools
Click to expand...
Click to collapse
okay Im as far as I have never been with a very weird method, maybe somebody can explain. Because my poco always wants to reboot I found out a way to keep in in Fastboot mode. I repeatedly press the power and volume down button, This way it stays on for a lot longer, but it still is not enough to succeed at flashing the rom. It also lets me believe that my problem is not a software but probably a hardware problem, otherwise and cannot explain this suuuper weird behavior. what do you guys think? is there a possible fix you know?
Related
Dear XDA Community,
in past 2 months i've been using CM13, constantly having some trouble with apps involving the camera, such as the camera app(surprise) and e.g. snapchat.
So yesterday I decided to update my CM Build, not knowing it would be to CM14 and with this Android 7.
So resulting from this I experienced a lot of issues with different apps, especially the google ones and for example Instagram. I DID NOT Upgrade my twrp, which was pretty stupid as I found out.
So this morning I checked again for CM Updates and Updated to Version Nightly...25 I think... but because I did not update my TWRP it did absolutely nothing except bricking my phone.
I already followed through the Guide for Hard Bricked OP3s (both steps) "http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700"
Though it sadly did not work for me. The Recovery tool and all works but when I want to boot my Phone the md5checksum pops up after the OP3 Logo and it tells me that everythings fine except "boot: failed".
I tried the procedure of the Hard Brick fix over and over again but nothing seems to work. I am fairly new to this whole Custom Rom stuff so I have absolutely no clue what do to.
Does anyone have any idea that could help?
Best Regards
Aliasalex
Try fastboot flashing the whole rom.
how? i dont have a factory img.
i tried flashing CM14 again and OxygenOs OTA. Currently i am getting Cache, Boot and System Failed.
In the meanwhile I managed to get twrp installed, but trying to install OS or CM via twrp didnt work either
//edit: ran the msm download tool again. Now only Boot is failing. tried flashing a boot.img via fastboot but didnt work
//edit2: when flashing the boot.img via fastboot my phone boots and works. When restarting without PC it still has cache and boot failure in md5checksum
try the 1st method you mentioned in the OP but flash https://www.androidfilehost.com/?fid=24591020540821926 . from what I understand, you need to full write all your partitions since they seems corrupted.
aliasalex said:
how? i dont have a factory img.
i tried flashing CM14 again and OxygenOs OTA. Currently i am getting Cache, Boot and System Failed.
In the meanwhile I managed to get twrp installed, but trying to install OS or CM via twrp didnt work either
//edit: ran the msm download tool again. Now only Boot is failing. tried flashing a boot.img via fastboot but didnt work
//edit2: when flashing the boot.img via fastboot my phone boots and works. When restarting without PC it still has cache and boot failure in md5checksum
Click to expand...
Click to collapse
I'll help you when I'm home
Connect your phone to Fastboot. Go to device manager on Windows. Do you see something with OnePlus or kedacomm. I had this issue as well managed to solve it after 2 days.
Demian3112 said:
I'll help you when I'm home
Connect your phone to Fastboot. Go to device manager on Windows. Do you see something with OnePlus or kedacomm. I had this issue as well managed to solve it after 2 days.
Click to expand...
Click to collapse
Yes a Kedacom USB Device "Android ADB Interface" is listed.
aliasalex said:
Yes a Kedacom USB Device "Android ADB Interface" is listed.
Click to expand...
Click to collapse
I'm not home atm. But can you change it by any chance to Oneplus? Your almost there! Maybe the video can explain something, I don't have a pc close.
https://youtu.be/maLWScgXflk
Demian3112 said:
I'm not home atm. But can you change it by any chance to Oneplus? Your almost there! Maybe the video can explain something, I don't have a pc close.
https://youtu.be/maLWScgXflk
Click to expand...
Click to collapse
I installed the adb setup, still shows my OP3 as Kedacom -> android adb device..
my phone has been working for the past few days flawlessly, but it still doesnt boot on its own
aliasalex said:
I installed the adb setup, still shows my OP3 as Kedacom -> android adb device..
my phone has been working for the past few days flawlessly, but it still doesnt boot on its own
Click to expand...
Click to collapse
You can't access Fastboot because of that Kedacom driver, if you right click it you should be able to change the driver.
https://support.hidemyass.com/hc/en...ow-to-disable-Driver-Signing-check-on-Windows try to boot into this. Also try to install Oneplus drivers. It's in the unbrick post.
Demian3112 said:
You can't access Fastboot because of that Kedacom driver, if you right click it you should be able to change the driver.
https://support.hidemyass.com/hc/en...ow-to-disable-Driver-Signing-check-on-Windows try to boot into this. Also try to install Oneplus drivers. It's in the unbrick post.
Click to expand...
Click to collapse
But I can access fastboot!?
Also I disabled Driver Signing Check when first trying to unbrick my phone.
I installed the drivers given in the Unbrick Test, it showed something like Qualcomm [something] 9003. There was something in between.
aliasalex said:
But I can access fastboot!?
Also I disabled Driver Signing Check when first trying to unbrick my phone.
I installed the drivers given in the Unbrick Test, it showed something like Qualcomm [something] 9003. There was something in between.
Click to expand...
Click to collapse
Nice, whdn you boot you still get those errors in red letter something with "failed boot". Then manually flash the boot. Img provided in the folder where you ran the Unbrick tool from. Command for Fastboot "fastboot devices", then "fastboot flash boot boot.img". Make sure that Kedacom is not in device manager when you are accessing Fastboot.
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
Two quick questions:
1.The phone died on its self without your intervention or...?
2.Have you tried to flash the stock firmware via MiFlash , while the phone is in edl mode(the command is: fastboot oem edl)?
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
pocchio said:
Hello everyone,
My Mi A2 Lite just died today. I was on stock 8.1 rooted and suddenly it freezes so I rebooted it and I got stuck on Android One logo WITHOUT ANY animation.
I tried to boot into recovery via adb but I get stuck on TWRP logo. I tried to flash fastboot image but nothing changes....
I really need help because I'm out of options
Click to expand...
Click to collapse
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
I think you are confusing some things here; adb is not an option now so you can´t boot device normally and also you said "fastboot edl" but they are different modes.
While in fastboot how did you try booting to TWRP image? (you said through adb but this is not right)
Can you get to fastboot? (hold vol down while booting, should see a rabbit on the screen)
pocchio said:
1) yes, it got stuck so I rebooted it
2) I tried flashing with MiFlash tool in fastboot mode. When I connect it in fastboot edl the mi flash tool sees it as COM and therefore I’m not able to flash it.
I’m I doing something wrong?
Click to expand...
Click to collapse
When your phone is in EDL mode(you won't be seeing any logo on your phone ,only black screen) it's absolutely normal to see the device as COM port , because the device is in another factory mode. And there is no problem flashing stock ,when your phone is seen as COM port. So if you can't flash the stock firmware in fastboot mode or EDL mode , maybe you have a hardware issue. To be sure -take a screenshot of the error in MiFalsh when the phone is in edl Mode (seen as a COM port) and you try to flash the stock firmware.
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
pocchio said:
Ok, I understand the difference between EDL (black screen) and Fastboot mode. I can get in both mode. I tried to flash fastboot stock rom (taken from the thread in xda) and everything goes smoothly, but it stays in fastboot mode at the end and when I send the command fastboot reboot it gets stuck again on the Android One logo (no animation).
When I tried the EDL mode, mi flash returns something missing (I will post the screenshot asap) and it seems like is not the right thing I'm trying to flash or something similar (I will post more information as soon as I can). (I'm trying to flash the same fastboot roms found in xda)
So, just to make sure I'm doing the right thing, where I can find the stock firmware to flash?
Thanks again for your help!
Click to expand...
Click to collapse
Here is the stock firmware from Xiaomi site:
https://en.miui.com/getrom-354.html?m=yes&mobile=2
Don't worry that it says MIUI , the firmware is Android One , they just forgot to change the name from MIUI to Android One , I have already tried it ,and I can confirm that it's 100% stock Android One firmware , good luck!
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
pocchio said:
Ok I performed the flash but the error i get is new.
I get the error ACK count don't match!
I tried the version
daisy_global_images_V10.0.9.0.PDLMIXM_20190514.0000.00_9.0_f9d0c739e0.tgz
Click to expand...
Click to collapse
I will give a solution in a minute
EDIT: Are you sure your bootloader is unlocked? (fastboot oem unlock)
You have two choices , you need to find an older version of MiFlash beta , i'll give you a video :
https://m.youtube.com/watch?v=-7O1Svib14g
In the video description you can find a link for the MiFlash beta ,I hope it helps.
If not , you'll have to consider the Testpoint unbrick method , there are several guides.
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
pocchio said:
OK, thanks to the use of the BETA version I was able to flash the rom but unfortunately I still get the same AndroidOne logo without any animation....
I really don't know what to do now...
Yes the bootloader is unlocked and I checked with fastboot getvar
Click to expand...
Click to collapse
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
nikoman1987 said:
Ok , it totally sound like some kind of hardware issue with the storage . Is there any way to boot in TWRP ?
Download the TWRP version 3.3.3-1 offain and try to boot with it (fastboot boot recovery(the name of the recovery).IMG) and wait until the TWRP logo disappear. Wait at least 1 minute if the logo doesn't disappear , then in my opinion , you have a hardware problem , if you succeed to booting in TWRP download the GM 1.1 version from this thread :
https://forum.xda-developers.com/mi-a2-lite/development/9-miui-rom-t3960704
and flash it via TWRP. Then reboot and leave the phone without touching at least 10 minutes (until you see some movement like on the bottom of the screen , there will be a MI logo , right above the logo if you see 3 dots moving , then you're saved . From there we can proceed , but if you can't flash even this rom , if nothing helps. I hope you have a warranty , reflash the stock rom with the option flash_all_lock and go to your warranty service center.
EDIT: I googled and found another issue, that might be causing this strange situation: You may got scammed , and the device might not be a Mi A2 Lite , but rebranded Redmi 6X. See this thread:
http://en.miui.com/thread-5984082-1-1.html
If your phone is displayed "Wayne" ,not "Daisy" ,then you'll have to flash a Redmi 6X firmware to get rid of the bootloop
Click to expand...
Click to collapse
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
pocchio said:
I will now try your solution, I just tried the testpoint unbrick method but still same problem.
The output from fastboot getvar all shows a DAISY bootloader. Where I can see the real name of the device to see if it is a Mi 6X?
Click to expand...
Click to collapse
the command is: fastboot oem get-product-model
nikoman1987 said:
the command is: fastboot oem get-product-model
Click to expand...
Click to collapse
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
pocchio said:
Unfortunately I get unknown command.
Additionally when I try to boot the TWRP I get stuck at logo forever....
Click to expand...
Click to collapse
tried the command too, it doesn't work.
So test point doesn't work too.. That's bad news
EDIT: fastboot getvar product command works , you can try it
And another question , have you tried to boot with patched boot.IMG ?
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
You need a recovery to flash , which has a specific partition in the phone storage. You can flash only via fastboot . You need to boot into recovery , so try with a patched boot image for your version of the rom
---------- Post added at 02:47 PM ---------- Previous post was at 02:38 PM ----------
pocchio said:
It seems indeed some hardware problem... Is there any way I can try to boot something from the SD card? (In order to rule out the storage problem....
Click to expand...
Click to collapse
So the last resort , we'll try to flash the ROM that I have mentioned before via fastboot. Place the zip file GM 1.1 in your PC (it has to be in the same directory as your adb and fastboot tools)
then open cmd and run the command
fastboot flash (the full name of the zip).zip
and hit enter
maybe that will solve it
And if this doesn't help again... type these fastboot commands :
fastboot format userdata
fastboot format system
fastboot format cache
fastboot format vendor
fastboot format recovery
fastboot format boot
then try again to reflash the stock rom (first try in edl mode ,if this doesn't do anything ,you'll have to format everything via fastboot commands again ,and try to flash the ROM in fastboot mode)
And if this doesn't help too... Then you're free to hit that ? in the ground hahahah (just kidding)
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
pocchio said:
Tried both these two last but nothig works, I always get the same problem.
I just saw your comment on patched boot, can you elaborate a little bit on this?
I'm honestly very close to throw it in the trash
Click to expand...
Click to collapse
which version of the firmware you are flashing? 10.0.9.0 or another version , so I can send you a link and walk you through the procedure.
And when you flashed the GM 1.1 the boot screen didn't changed from Android one? (the GM 1.1 version is a MIUI stock port and has to change your boot screen to black screen with white MI logo on it) It is very important to know
One of my friends told me to try this: just open the directory of the stock firmware , navigate to flash_all.bat and run the bat file (NOT THE FLASH_ALL_LOCK!!!) and wait for the end of the process. He had a similar problem , and it worked. He explained that for any reason , the recovery was the problem , because it was flashed in the boot partition. When you use flash_all.bat The file will erase all partitions and rewrite them. MiFlash won't , so try that
Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
chrwo said:
Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
Click to expand...
Click to collapse
Try fastboot method without bootloader lock
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
TWRP is not required to flash the global ROM.
Just specify the unzipped global ROM as the working directory of MiFlash.
try flashing fastboot rom using miflash tool
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Mi Pad 5 didn't have recovery partition, since it use A/B structure. You must execute fastboot boot recovery.img and after that install recovery to RAMdisk.
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Whered you even get twrp? Had an error while flashing from cn to global as well about sparse super failed. Then tried reflashing but i got the same error as you had and all i did was reboot the tablet in fastboot while it was still in fastboot and after that it flashed successfully even though it threw out am error flash is not done but the tablet rebooted hy itself and then booted up after a minute or two. Almost gave me a heart attack while i was at it
Edit: seems you flashed it successfully already thats good. Fastboot can be clunky on ryzen sometimes, i remeber back on mi a2 had to use a hub instead of directly connecting my phone to my ryzen pc for fastboot to work properly and not get stuck while flashing. But now i can connect directly after switching to a b450motherboard, was using a b350 before
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
chrwo said:
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
Click to expand...
Click to collapse
It would be great if you can make a step-by-step guide on how to do this. Thank you.
puleen said:
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
Click to expand...
Click to collapse
prob just driver problems, i use ryzen and it works fine.
Don't know if I need to create a new thread. After the unlocking, I tried to change the region from RU to CN and got the same problem after a "successful" update as chrwo with "Mismatching image and device" error and fastboot mode. Then I tried to flash global version and the device error is gone but I still have the fastboot mode. Recovery from MiToolv2 doesn't help either, after successful recovery tablet still goes only to fastboot.
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Choochter said:
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
Click to expand...
Click to collapse
Not work for me.
But when I try with Miflash tool and anoter Rom (newest), it worked
Critical Hit said:
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Click to expand...
Click to collapse
I meer the same errỏr when I use Intel PC.
So, I dont think this a problem of Ryzen
i also brick the device using mi-flash sucking program. i finally using fastboot command flashing which copying from the stock rom "flash_all.bat" file.
So we can't lock the bootloader after installing the global rom?
so my ginkgo got hardbricked today.. i couldn't access fastboot and recovery mode. but it does bootloop instead of getting the text "System got destroyed"...
Anybody got a solution for this? I tried to flash TWRP to wipe my data, and use MiFlashTool to relock the bootloader as well as flash MIUI stock rom.
hellohell0 said:
so my ginkgo got hardbricked today.. i couldn't access fastboot and recovery mode. but it does bootloop instead of getting the text "System got destroyed"...
Click to expand...
Click to collapse
"System got destroyed" does not display on all types of bricks
hellohell0 said:
Anybody got a solution for this? I tried to flash TWRP to wipe my data, and use MiFlashTool to relock the bootloader as well as flash MIUI stock rom.
Click to expand...
Click to collapse
make sure the power button is not stuck
do not relock your bootloader (you have no chance of fixing it while locked,beside EDL)
try flashing VBMETA first, then see with a custom recovery
loopypalm said:
"System got destroyed" does not display on all types of bricks
make sure the power button is not stuck
do not relock your bootloader (you have no chance of fixing it while locked,beside EDL)
try flashing VBMETA first, then see with a custom recovery
Click to expand...
Click to collapse
Hello. Sorry I couldn't reply quicker due to busy week. I tried to flash TWRP through fastboot mode but no luck. So, flashing VBMETA would be useless too, Since fastboot couldn't recognize my phone (
Code:
fastboot devices
). Please note that I've had the USB driver installed for my phone.
hellohell0 said:
Hello. Sorry I couldn't reply quicker due to busy week. I tried to flash TWRP through fastboot mode but no luck. So, flashing VBMETA would be useless too, Since fastboot couldn't recognize my phone (
Code:
fastboot devices
). Please note that I've had the USB driver installed for my phone.
Click to expand...
Click to collapse
i'm not sure what could be the problem here (no enough data)
could be the usb cable
could be the usb port
could be the windows version/drivers ...
if you are 100% sure those are not the cause then your only left option is EDL
loopypalm said:
i'm not sure what could be the problem here (no enough data)
could be the usb cable
could be the usb port
could be the windows version/drivers ...
if you are 100% sure those are not the cause then your only left option is EDL
Click to expand...
Click to collapse
Just got back from my friend's house. Yes, the solution is EDL
My phone is back to normal now, but this would happen again since my friend told me that the eMMC might be corrupted.
Thank you for the help! I thought it was impossible since my phone won't fully recognized in the PC (It was called Android but with question mark)
Case closed.
In a bit of a dilemma. Bought a Poco F3 a little bit back, decided to get a custom rom (crdroid). I flashed it successfully but Gapps wasn't working, discovered i got the wrong version so tried to directly flash the right version, but got stuck in a bootloop. Fastboot devices isn't seeing anything now for some reason although device manager sees the phone. Tried to flash stock miui but that wasn't working, am out of ideas as to what to do. Any ideas? Thanks
are you using a USB 2.0 port? (USB 2.0 is better, sometimes 3.0 ports have issues flashing). have you got drivers installed? but yeah, i think flashing stock fastboot rom via miflash is the way forward... but are the above 2 queries checked 1st?
also, are you using an AMD pc/laptop?
EDIT: are you even using a fastboot miui rom to reflash, or flashing a zip via twrp? again, miflash is best. be sure not to check 'flash all and lock', instead choose flash all and clean
Does your phone show something? Don't reboot your phone. Otherwise you may not be able to get back into Fastboot and instead have a Black Screen.
Try unplugging your phone and just reconnecting it, perhaps restart your PC (but not phone!).
You can also try Linux, that's what I use. Windows gave me problems sometimes. Mi Flash isn't on Linux but you can use the Batch-Scripts directly, that's all what Mi Flash is doing. Just running the Batch-Script file that you select.
Let me know how it goes. If you need more help let me know.