Hey peeps, I'm looking at biting the bullet on a 9" Dasaita PX5 4gb/32gb head unit for my Subaru Forester.
It is replacing the stock Nav unit which has fuel consumption data among other things.
I'm wondering if I will be able to use an app like Torque tools to see that data over the existing Canbus connection or do I need to use a Bluetooth odb2 plug or something along those lines?
If I do have to use an odb2 plug can I connect my phone via Bluetooth at same time? Any advice or suggestions on Android head unit model choice and Dasaita reviews would be appreciated.
9" Android 8.0 Car Radio GPS for Subaru Forester Navigation 2008 2009 2010 2011 2012 Head Unit 4G 32G Octa Core
Search it on AliExpress. I can't post links yet apparently
Hello, i dont have a Subaru while using a Dasaita HU. IMO, if you have a Canbus converter box, and it already show some car's info before on the original HU, it will show the same on your new HU.
Case of using odb2 connected by Bluetooth, you can even connect Bluetooth with your smartphone at the same time.
Hopefully, I'm posting in the correct sub-forum.
I have a Peugeot 308 (2012).
This is the head unit.
These are the full specifications:
Rockchip PX5 (2017)
ARM Cortex-A53 Octa-core ≤ 1.5GHz (28nm)
PowerVR G6110 GPU (2014)
4 GB DDR3
AOSP Android 8.0
1024x600
STMicroelectronics TDA7388 audio power amplifier (2013)
STMicroelectronics TDA7786 AM/FM funer (2016)
In the software itself, it shows:
Manufacturer: rockchip
Model number: PX5
Android version: 8.0.0
Android security patch level: October 5, 2017
Kernel version: 4.4.93+; [email protected] #121; Fri Jan 26 10:41:07 CST 2018
Build number: px5-userdebug 8.0.0 OPG5.170623.007 eng.hct.20180126.113204 test-keys
MCU version: MTCE_CHS_V2.76_1; Dec 20 2017 15:49:46
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
When I plug my stock Peugeot head unit in, the rear speakers work perfectly.
However, they do not on this Android head unit.
They're not totally silent, they're about 2-3% "static"-type sound.
Any ideas?
King Mustard said:
Hopefully, I'm posting in the correct sub-forum.
I have a Peugeot 308 (2012).
Rockchip PX5 (2017)
Model number: PX5
Android version: 8.0.0
Build number: px5-userdebug 8.0.0 OPG5.170623.007 eng.hct.20180126.113204 test-keys
MCU version: MTCE_CHS_V2.76_1; Dec 20 2017 15:49:46
When I plug my stock Peugeot head unit in, the rear speakers work perfectly.
However, they do not on this Android head unit.
They're not totally silent, they're about 2-3% "static"-type sound.
Any ideas?
Click to expand...
Click to collapse
What did the reseller suggest?
marchnz said:
What did the reseller suggest?
Click to expand...
Click to collapse
Was on AliExpress - so never a single response.
King Mustard said:
Hopefully, I'm posting in the correct sub-forum.
I have a Peugeot 308 (2012).
This is the head unit.
These are the full specifications:
Rockchip PX5 (2017)
ARM Cortex-A53 Octa-core ≤ 1.5GHz (28nm)
PowerVR G6110 GPU (2014)
4 GB DDR3
AOSP Android 8.0
1024x600
STMicroelectronics TDA7388 audio power amplifier (2013)
STMicroelectronics TDA7786 AM/FM funer (2016)
In the software itself, it shows:
Manufacturer: rockchip
Model number: PX5
Android version: 8.0.0
Android security patch level: October 5, 2017
Kernel version: 4.4.93+; [email protected] #121; Fri Jan 26 10:41:07 CST 2018
Build number: px5-userdebug 8.0.0 OPG5.170623.007 eng.hct.20180126.113204 test-keys
MCU version: MTCE_CHS_V2.76_1; Dec 20 2017 15:49:46
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
When I plug my stock Peugeot head unit in, the rear speakers work perfectly.
However, they do not on this Android head unit.
They're not totally silent, they're about 2-3% "static"-type sound.
Any ideas?
Click to expand...
Click to collapse
Have you tried, just for a test, to exchange output wires? if not try remove the audio out wires from the harness (1st make a photos for reference) and replace position: front speakers to rear speaker and rear speakers to front speakers; then check if the issue is still present and you dont ear sound from, in this case, front speaker (the audio output was originally connected to rear)
If not swap again the wires cheking the right polarity (maybe was a incorrect harness position); if the issue still present probably you have a faulty unit.
Hope that help
iRcKenny said:
Have you tried, just for a test, to exchange output wires? if not try remove the audio out wires from the harness (1st make a photos for reference) and replace position: front speakers to rear speaker and rear speakers to front speakers; then check if the issue is still present and you dont ear sound from, in this case, front speaker (the audio output was originally connected to rear)
If not swap again the wires cheking the right polarity (maybe was a incorrect harness position); if the issue still present probably you have a faulty unit.
Hope that help
Click to expand...
Click to collapse
If I'm honest, I'm not sure what much of what you said means.
Please see the attached photo.
At the moment, I only have F connected. All seven cables for F have a female RCA connector. Only green is currently being used.
AV-OUT (1) (yellow)
AV-OUT (2) (yellow)
FL OUT (white)
RL OUT (white)
FR OUT (red)
RR OUT (red)
Subwoofer (green) - Currently connected to my subwoofer
I am currently getting sound out of my front speakers (presumably through the Power section) and my subwoofer but there is nothing coming out of the rear speakers.
If I connect the original, basic Peugeot stereo, I get sound out of the front and rear speakers. This suggests the Power cables alone can do both; though they're not working for my new head unit.
Connected to Power is a ton of cabling. This is some of it:
AUX IN L (white) - RCA male (not currently in use)
AUX IN R (red) - RCA male (not currently in use)
BACK V IN (yellow) - RCA female (not currently in use)
I have spliced the AUTO ANT with the subwoofer, to power it.
From that information, does anyone know why I may not be getting sound out of the rear speakers?
King Mustard said:
If I'm honest, I'm not sure what much of what you said means.
Please see the attached photo.
At the moment, I only have F connected. All seven cables for F have a female RCA connector. Only green is currently being used.
AV-OUT (1) (yellow)
AV-OUT (2) (yellow)
FL OUT (white)
RL OUT (white)
FR OUT (red)
RR OUT (red)
Subwoofer (green) - Currently connected to my subwoofer
I am currently getting sound out of my front speakers (presumably through the Power section) and my subwoofer but there is nothing coming out of the rear speakers.
If I connect the original, basic Peugeot stereo, I get sound out of the front and rear speakers. This suggests the Power cables alone can do both; though they're not working for my new head unit.
Connected to Power is a ton of cabling. This is some of it:
AUX IN L (white) - RCA male (not currently in use)
AUX IN R (red) - RCA male (not currently in use)
BACK V IN (yellow) - RCA female (not currently in use)
I have spliced the AUTO ANT with the subwoofer, to power it.
From that information, does anyone know why I may not be getting sound out of the rear speakers?
Click to expand...
Click to collapse
RCA F Connectors are only used with and external amplificator, they are pre-out
I recently bought a crude DSP unit which sits in between the head unit and my ISO connection, when i installed it i got no sound from rear speakers, I discovered I needed to change the setting in Factory where it says Amplifier (it was no, i changed it to auto detect) I can no longer control the fade F R but all rear speakers work now.
Try it and see if it helps.
Between now and the last post, I bought a Pumpkin ND0286B head unit. I had the same issue with that.
I bought a Pioneer MVH-A200VBT (£130) today and installed it.
Driving to some shops (20 minutes away), everything was fine.
After shopping, I turned the engine on and had the same familiar fault - could only hear the subwoofer.
After a few seconds, the head unit started to flash: AMP Error.
So it wasn't an issue with the Chinese Android-based head units after all
Does this help you, perhaps, narrow down what the issue could be and how I could go about fixing it?
Amplifier, go to fader, then change position of big dot/press CENTER?
King Mustard said:
Between now and the last post, I bought a Pumpkin ND0286B head unit. I had the same issue with that.
I bought a Pioneer MVH-A200VBT (£130) today and installed it.
Driving to some shops (20 minutes away), everything was fine.
After shopping, I turned the engine on and had the same familiar fault - could only hear the subwoofer.
After a few seconds, the head unit started to flash: AMP Error.
So it wasn't an issue with the Chinese Android-based head units after all
Does this help you, perhaps, narrow down what the issue could be and how I could go about fixing it?
Click to expand...
Click to collapse
What items have you thought about investigating? Wiring, shorts to speakers and or speaker fault?
Without basic troubleshooting skills and tools, perhaps consult local expertise.
guys please help me , i dont have fader sound option in setting , what could i do plz
aysoy said:
guys please help me , i dont have fader sound option in setting , what could i do
Click to expand...
Click to collapse
Hi Guyz,
Is it an MTCD/E?
marchnz said:
Hi Guyz,
Is it an MTCD/E?
Click to expand...
Click to collapse
marchnz said:
Hi Guyz,
Is it an MTCD/E?
Click to expand...
Click to collapse
@aysoy guy,
Not an MTCD.
Try Android Head-units forum.
Does anyone know if Dasaita has released a unit that’s compatible with the Toyota Highlander from 2019 onwards? I can’t seem to find anything on it.
How about this one
https://m.aliexpress.com/item/4001146684909.html?spm=a2g0n.productlist.0.0.32621446bZhwKU&browser_id=843a45fb26d8415a8965f67ab2f60681&aff_trace_key=&aff_platform=msite&m_page_id=r8bkgdsdkfwcauog1765d31032da5c6c67297e20f0&gclid=&_imgsrc_=ae01.alicdn.com%2Fkf%2FH4400f458c2b9428b9aea876bd563d60ez.jpg_640x640Q90.jpg
There is one on amazon also that says it’ll fit in the q&a: Dasaita 10.2 inch Large Screen Single Din Android 10.0 Car Stereo for Toyota Highlander 2015 2016 2017 2018 Radio with GPS Navigation 4G Ram 64G ROM Built in DSP Dash Kit Meomery Card https://smile.amazon.com/dp/B07QV67XBW/ref=cm_sw_r_cp_api_glc_fabc_7gL1FbPREP3SX
Hi,
I have a Dasaita head unit (max6) with android 10 connected with canbus to my Honda Civic 2015 (5 doors European market).
SWC functionality works.
head unit going into dark mode thencar light are on.
It shows in a banner air conditioner info when playing around with the AC.
It shows when a door is opened.
what I can’t figure how to sync is the clock on the Imid display.
It shows the wrong hour! Is there a way to fix it?
Thanks!
Hi all,
Hopefully there's a simple answer to my issues. I had one of these units delivered today and was told by the seller that it will include all required cables to have everything working as expected.
Dasaita 9" Android 10.0 Bluetooth Car Radio with Carpaly for Nissan Qashqai J10 2008 2009 2010 2011 2012 2013 2014 Car Stereo Android Auto DAB DSP 4GB/64GB Support Wifi SWC USB GPS Navigation: Amazon.co.uk: Electronics & Photo
Free delivery and returns on eligible orders. Buy Dasaita 9" Android 10.0 Bluetooth Car Radio with Carpaly for Nissan Qashqai J10 2008 2009 2010 2011 2012 2013 2014 Car Stereo Android Auto DAB DSP 4GB/64GB Support Wifi SWC USB GPS Navigation at Amazon UK.
smile.amazon.co.uk
It included the DYX028 cable as stated in the description which will be required for the camera and steering wheel function ( If your car has Bose Amplifier, 360 camera, original USB and AUX, please buy the DYX028-1 cable (B07M5WHM3M)
I have the unit installed, but there was nowhere to connect my 360 camera button to and the steering wheel controls are not working.
Any advise will be greatly appreciated