Hi I cannot get any CANBUS info on my headunit from 2014 Highlander like door opening, temperature setting, etc. As mine is LE Plus which does not require CANBUS in wiring harness. Is there any factory setting in MCU as I have selected Toyota raised. Anybody with Toyota can help.
Sent from my A0001 using XDA-Developers mobile app
Hello all ,
i have Xtrons PB78AA3RP head unit(android 8.0). I bought one OBD adapter, " HH OBD Advanced " .
My problem is that adapter isn't even listed in Bluetooth available devices on my xtrons headunit.
I connected adapter with my smartphone and it's paired and working normally with torque app.
Any suggestions ?
thanks in advance.
Mike.
I too have an Xtrons unit for a BMW X5 with the same problem. Same hardware as yours I'm guessing. It's a PX5 Android 8.0. The Bluetooth won't find anything other than my HTC cell phone. I run Dashcommand paired to an OBD dongle, and its a massive fight manipulating the app and HU and obd dongle. I can get it to connect sometimes. It doesn't find it half the time. I have given up on it temporarily, until recently I tried pairing my new escort Max 360c radar detector. HU doesn't see it either. Ever. Hoping someone on here can help us out. Wondering if it's a hardware issue or software issue with Xtrons? I am going to reach out to Xtrons and I will post anything I learn on here.
Hello everyone,
I would like to install an android car radio in my 2012 fiesta, not so much for having the color display, the touchscreen or the possibility of seeing videos but to change the main unit and have better sound (I have installed quality speakers, I have soundproofed the doors and installed an amplifier, but there is a background noise, which also increases with the engine revs and having tried with 2 different amplifiers, I have to assume that it is the fault of the car's head unit).
The problem is that Chinese sellers are not very clear about compatibility;
for the fiesta from 2013 onwards there should be no problem, but I have a 2012.
In the past few years I have been looking for an android radio that would display informational messages on the display and allow the car settings to be adjusted (as is done with the original radio), but it was not possible for fiestas from 2008 to 2012.
I would like to keep the vehicle information messages (such as for open doors or climate controls), I would also like the steering wheel and facia dashboard controls to work; if it could also work the bluetooth would be great! (I have a sony car radio, the one with black facia, with usb and bluetooth, no synch).
Among the various I contacted is Witson, but they were unclear and contradictory about compatibility; one employee told me that it is compatible, another told me that it is not compatible.
Even the employees of belsee, jdaston and Ljda have told me that their units are compatible with my car. but I found no reviews about it.
is there someone here on the forum that can help me, maybe someone who has more information or who has installed one?
Thanks
PS
I am attaching the images of my car and radio model (2012 Ford Fiesta, titanium version)
Hello,
I have similar thoughts and installed android head unit to my mk7 facelift fiesta (2013) I'm new on this things but I will try to help.
After the installation of head unit, I still have the information messages for ac and doors, steering wheel and dashboard buttons are still usable(adapted to new system for different functions). My usb and aux port is still working. The system I have has bluetooth, wifi, gps, carplay/android auto(wifi and cable), other apps(play store), rear view camera. Only rear parking sensors not showing on system because they're not car spesific theyre universal parts, I you have original sensors they will also shown in screen. All this compatibility comes from canbus adapters, theyre spesific to car model which comes with head units and it manages all the communication/adaptation with car, So If head unit you looking for is specified for your car, everthing has to be similar in your condition too.
Before I had this unit. My car is fiesta 1.0 ecoboost titanium x , in Turkey it comes with this unit.
After installation, this is my unit ''AC8227L'' 1gb ram and android 6.0 version, exact same design with picture
I did some modding on theme of course and this is how it looks now
I also modded new boot logo with little photoshop
Device details
Car notification example
If you had anything as a question, just let me know
How is the sound quality? I installed a similar item, but 9 inch. Sound quality is really poor compared to factory radio. The OP is having a Sony radio so I think changing it to a chinese android radio would be multiple steps backwards.
thanks for sharing
Opperpanter said:
How is the sound quality? I installed a similar item, but 9 inch. Sound quality is really poor compared to factory radio. The OP is having a Sony radio so I think changing it to a chinese android radio would be multiple steps backwards.
Click to expand...
Click to collapse
Mostly I use with bluetooth so not sure but. I think factory audi is %10 better than new android unit
cleartdragon said:
Hello,
I have similar thoughts and installed android head unit to my mk7 facelift fiesta (2013) I'm new on this things but I will try to help.
After the installation of head unit, I still have the information messages for ac and doors, steering wheel and dashboard buttons are still usable(adapted to new system for different functions). My usb and aux port is still working. The system I have has bluetooth, wifi, gps, carplay/android auto(wifi and cable), other apps(play store), rear view camera. Only rear parking sensors not showing on system because they're not car spesific theyre universal parts, I you have original sensors they will also shown in screen. All this compatibility comes from canbus adapters, theyre spesific to car model which comes with head units and it manages all the communication/adaptation with car, So If head unit you looking for is specified for your car, everthing has to be similar in your condition too.
Before I had this unit. My car is fiesta 1.0 ecoboost titanium x , in Turkey it comes with this unit.
After installation, this is my unit ''AC8227L'' 1gb ram and android 6.0 version, exact same design with picture
I did some modding on theme of course and this is how it looks now
I also modded new boot logo with little photoshop
Device details
Car notification example
If you had anything as a question, just let me know
Click to expand...
Click to collapse
cleartdragon said:
Hello,
I have similar thoughts and installed android head unit to my mk7 facelift fiesta (2013) I'm new on this things but I will try to help.
After the installation of head unit, I still have the information messages for ac and doors, steering wheel and dashboard buttons are still usable(adapted to new system for different functions). My usb and aux port is still working. The system I have has bluetooth, wifi, gps, carplay/android auto(wifi and cable), other apps(play store), rear view camera. Only rear parking sensors not showing on system because they're not car spesific theyre universal parts, I you have original sensors they will also shown in screen. All this compatibility comes from canbus adapters, theyre spesific to car model which comes with head units and it manages all the communication/adaptation with car, So If head unit you looking for is specified for your car, everthing has to be similar in your condition too.
Before I had this unit. My car is fiesta 1.0 ecoboost titanium x , in Turkey it comes with this unit.
After installation, this is my unit ''AC8227L'' 1gb ram and android 6.0 version, exact same design with picture
I did some modding on theme of course and this is how it looks now
I also modded new boot logo with little photoshop
Device details
Car notification example
If you had anything as a question, just let me know
Click to expand...
Click to collapse
Where did you buy it
Hello,
I have a Dasaita px5 HU and about 6 months later Dasaita upgraded to px6. My installer was unable to connect my headrest monitors to the HU. I reached out to Dasaita regarding what options or Converters that may be needed and they advised me to upgrade to px6. Are there any other options to make this happen?
Thanks
Hi all,
Hopefully there's a simple answer to my issues. I had one of these units delivered today and was told by the seller that it will include all required cables to have everything working as expected.
Dasaita 9" Android 10.0 Bluetooth Car Radio with Carpaly for Nissan Qashqai J10 2008 2009 2010 2011 2012 2013 2014 Car Stereo Android Auto DAB DSP 4GB/64GB Support Wifi SWC USB GPS Navigation: Amazon.co.uk: Electronics & Photo
Free delivery and returns on eligible orders. Buy Dasaita 9" Android 10.0 Bluetooth Car Radio with Carpaly for Nissan Qashqai J10 2008 2009 2010 2011 2012 2013 2014 Car Stereo Android Auto DAB DSP 4GB/64GB Support Wifi SWC USB GPS Navigation at Amazon UK.
smile.amazon.co.uk
It included the DYX028 cable as stated in the description which will be required for the camera and steering wheel function ( If your car has Bose Amplifier, 360 camera, original USB and AUX, please buy the DYX028-1 cable (B07M5WHM3M)
I have the unit installed, but there was nowhere to connect my 360 camera button to and the steering wheel controls are not working.
Any advise will be greatly appreciated