I have an XTRONS TE706PL MTCE_GS V2.88_3, and I'm wondering if it's possible to display ANYTHING through the video output, and how?
I've ran the video rca to the aux on my rear DVD, but I can't get any output.
I almost purchased this model but after a lot of reading reviews it became clear that it does NOT have Full RCA out, it can only output to the RCA outs from Aux-in so if you have an external TV box going into the head unit via Aux-in this it will output to RCA outs, which is a backward step for Xtrons, their tec department confirmed this to me in an email.
Paul2482 said:
I almost purchased this model but after a lot of reading reviews it became clear that it does NOT have Full RCA out, it can only output to the RCA outs from Aux-in so if you have an external TV box going into the head unit via Aux-in this it will output to RCA outs, which is a backward step for Xtrons, their tec department confirmed this to me in an email.
Click to expand...
Click to collapse
The only MTCD/E units that do proper video out are the RK3188/PX3 Nougat units, these have HDMI out, however, as Xtrons are a seller only (they buy from a variety of different manufacturers, slap their badge on them and sell as "Xtrons" units) they have no control over video out (or anything else other than pricing and what made up model number to give each unit), only ShenZhen GESHI Electronics And Technology CO LTD, the manufacturers of the "GS" MTCD/E unit Xtrons sell, have any control over this.
typos1 said:
The only MTCD/E units that do proper video out are the RK3188/PX3 Nougat units, these have HDMI out, however, as Xtrons are a seller only (they buy from a variety of different manufacturers, slap their badge on them and sell as "Xtrons" units) they have no control over video out (or anything else other than pricing and what made up model number to give each unit), only ShenZhen GESHI Electronics And Technology CO LTD, the manufacturers of the "GS" MTCD/E unit Xtrons sell, have any control over this.
Click to expand...
Click to collapse
I have the xtrons PB76FFFP which is a PX5 MTCE_GS_V2.78_3 unit, and it has Full RCA, and duel zone, everything on the head unit is displayed on my headrests, so it would seem that it is not just the PX3 that has full RCA out.
Paul2482 said:
I have the xtrons PB76FFFP which is a PX5 MTCE_GS_V2.78_3 unit, and it has Full RCA, and duel zone, everything on the head unit is displayed on my headrests, so it would seem that it is not just the PX3 that has full RCA out.
Click to expand...
Click to collapse
Lots of people have problems with video out, glad to hear dual zone works on yours.
But I did not say that the PX3 had RCA out - lots of units have RK3188/PX3 pocessors, including non MTC units - I said that MTCD/E Nougat RK3188/PX3 units have HDMI out, whereas MTCB/C JB/KK/Lollipop RK3188/PX3 units, MTCD/E RK3188/PX3 Lollipop units and RK3368/PX5 MM/Oreo units have RCA out.
BTW, you just have a GS MTCE RK3368/PX5 unit - "PB76FFFP" is a number made up by Xtrons.
Hey peeps, I'm looking at biting the bullet on a 9" Dasaita PX5 4gb/32gb head unit for my Subaru Forester.
It is replacing the stock Nav unit which has fuel consumption data among other things.
I'm wondering if I will be able to use an app like Torque tools to see that data over the existing Canbus connection or do I need to use a Bluetooth odb2 plug or something along those lines?
If I do have to use an odb2 plug can I connect my phone via Bluetooth at same time? Any advice or suggestions on Android head unit model choice and Dasaita reviews would be appreciated.
9" Android 8.0 Car Radio GPS for Subaru Forester Navigation 2008 2009 2010 2011 2012 Head Unit 4G 32G Octa Core
Search it on AliExpress. I can't post links yet apparently
Hello, i dont have a Subaru while using a Dasaita HU. IMO, if you have a Canbus converter box, and it already show some car's info before on the original HU, it will show the same on your new HU.
Case of using odb2 connected by Bluetooth, you can even connect Bluetooth with your smartphone at the same time.
Hello all ,
i have Xtrons PB78AA3RP head unit(android 8.0). I bought one OBD adapter, " HH OBD Advanced " .
My problem is that adapter isn't even listed in Bluetooth available devices on my xtrons headunit.
I connected adapter with my smartphone and it's paired and working normally with torque app.
Any suggestions ?
thanks in advance.
Mike.
I too have an Xtrons unit for a BMW X5 with the same problem. Same hardware as yours I'm guessing. It's a PX5 Android 8.0. The Bluetooth won't find anything other than my HTC cell phone. I run Dashcommand paired to an OBD dongle, and its a massive fight manipulating the app and HU and obd dongle. I can get it to connect sometimes. It doesn't find it half the time. I have given up on it temporarily, until recently I tried pairing my new escort Max 360c radar detector. HU doesn't see it either. Ever. Hoping someone on here can help us out. Wondering if it's a hardware issue or software issue with Xtrons? I am going to reach out to Xtrons and I will post anything I learn on here.
Is it possible use my factory tpms with my android head unit. Rk3399
Managed to put an px6 board 4gb-64gb rom instead of the original px30 (2gb ram-32gb rom)SOM board, nothing to do, worked immediately ... no mcu reprogrammation needed (even did an config export)
The px6 came from an XTRONS TQ709ipl i was sick of the capacitive touch problems who just began this past week. I opened the 2 radio casings and saw they had the STM32 mcu interface.
I did not saw any thread about SOM interchange between brands
Now stuck with an working Xtron tq709 main board / frame, and 2 px30 som, i received one spare SOM in the warranty period thinking the Eonon had a problem, the 20 pin power plug had a problem, not the radio ...