Managed to put an px6 board 4gb-64gb rom instead of the original px30 (2gb ram-32gb rom)SOM board, nothing to do, worked immediately ... no mcu reprogrammation needed (even did an config export)
The px6 came from an XTRONS TQ709ipl i was sick of the capacitive touch problems who just began this past week. I opened the 2 radio casings and saw they had the STM32 mcu interface.
I did not saw any thread about SOM interchange between brands
Now stuck with an working Xtron tq709 main board / frame, and 2 px30 som, i received one spare SOM in the warranty period thinking the Eonon had a problem, the 20 pin power plug had a problem, not the radio ...
Related
i got my new RK3188 based head unit 3 weeks ago (android 5.1), with CANBUS module to display varies car info in the unit and get the steering wheel controls working, last week my car displayed "Error: Transmission" (Skoda Octavia 2014), and my transmission box started to act weird (skipping gears).
First thing i did - was to remove the head unit, but the problem was still there, as my car is still under manufacturer warranty - i took it to repair shop (after installing the original head unit back), and got it back after four days - they said that the transmission computer has malfunctioned and they replaced it.
The nature of the problem (computer malfunction) and timing of it (two weeks after installing a head unit with CANBUS connectivity) got me worried - that maybe something with the head unit caused this problem.
has anyone every encountered this? can it even happen (is there any protection for such issues in the CANBUS protocol?)?
The problem with your transmission computer is completely unrelated.
Thanks!
My MTCB RK3188 unit bricked due to a wrong flash of firmware, i used MTCD instead of MTCB, after flashing and reboot the unit was completely dead.
The unit simply does not boot anymore, it does not respond on anything, i even cannot get into recovery, screen stays off also the button lights etc. Unit does has power, it execpt DVD/CD disk but does not play ofcours, after powering off/on an pressing eject it indeed ejects the disk.
Sending it back is expensive and i am afraid the seller won't execpt this under warranty, is it possible to fix this by just replacing the SOM board inside the unit for an other one? The SOM board is just plugged in (same as a memory dim/sim in a pc/laptop) and can be removed.
If this indeed is possible to get the unit working again does someone has a link where to buy (cheap) new RK3188 SOM for a MTCB unit?
2 years ago i bought a eonon unit for my ford focus (kd 7018) g616X rk3066 4.2 android. the unit was great and preformed well.
a year ago i bought another android unit but from ebay for mitsubishi outlander rk 3066 4.4. this unit had a faulty radio tuner that was poorly built. also, the reception was awful (on and off reception and need to on off the unit to hear properly)
i sold the ford car and was left with the good ford unit.
today i tried to find a solution for the tuner problem and all over sound problem in the outlander unit. i tried the dab and it worked ok, but i wanted the simplicity of the radio app. after reading a question here about switching screen i just got the outlander unit from the car and started to swap the screens.
i had much luck that the units probably came from the same assembly line but with different qc . so all i needed to do is chang two flat cables and change all the steel case between units.
after i changed the screens (and buttons and facia) it just worked!
i did not change the card with the processor and memory but to make the "face" fit i need to replace cd/case and dismantle all the unit.
weird thing was that the car symbol (ford) and (mitsubishi) "stayed" with the motherboard.
some pics:
You can change the car symbol go to factory settings and code is 126 and u can see car logos menu
or watch this video https://www.youtube.com/watch?v=h_k2Zd9dHxA
Hi,
I have bought a MTCD Headunit back in January:
de.aliexpress.com/item/32873978107.html
Octa-Core, 32GB Ram, ...
I tried to fit it into my Peugeot 308 CC (MY 2011) but only the button-lights went on an nothing happened. After a few discussions with the seller we came to the conclusion that the unit is defect.
I now bought another one similar to this from another seller:
de.aliexpress.com/item/33010188664.html
And in this case nothing is happening as soon as I turn the key. No lights, no sound.
The original radion is still working but none of the headunits I've bought will boot. Is there anyone who could help me?
Hi!!
My Dasaita Vendor sent me a PX6 Max10 card to replace my PX5 Max6 card for free. Only the system card, not the screen that itś the original of my PX6 Max6. We change it without problems but when we power on the Dasaita, the screen started to show image like following videos, captured from my Dasaita:
FAULTY SCREEN VIDEO 1
FAULTY SCREEN VIDEO 2
FAULTY SCREEN VIDEO 3
Finally I give up. I try all, update firmware, update MCD with EXT (I proof all the values, 1 to 20), the display change resolution but the image is still faulty. I proof with 3 flex cables, the two of the cards and other that I bought, more long. The same faulty with the first two, with the long cable the images transforms into 3 or 4 lines, nothing more. With two cards the same problem.
Can somebody helps me with any idea???
Sorry for my english. Thanks!!!!!
It seems like the PX 6 module is in poor contact with the MB, or the GPU is faulty
pixel1 said:
It seems like the PX 6 module is in poor contact with the MB, or the GPU is faulty
Click to expand...
Click to collapse
The problem is the same with both modules. The px6 Max10 and the px6 Max6. It's imposible that both modules have the same gpu problem. And when I connect both with HDMI with an external PC display all work PERFECT.
You need to be careful in your selection of PX6 max10 cards. There was a resolution change in the middle of the PX6 max10 production and the newer ones run at 720p instead other the older resolution of the px5 and first generation px6
That may be your issue.
Bob_Sanders said:
You need to be careful in your selection of PX6 max10 cards. There was a resolution change in the middle of the PX6 max10 production and the newer ones run at 720p instead other the older resolution of the px5 and first generation px6
That may be your issue.
Click to expand...
Click to collapse
No. The resolution is not the problem. I fixed it with an EXT update and nothing. I probe many resolutions and nothing, same problems with max 6 and Max 10 card.