Hi I cannot get any CANBUS info on my headunit from 2014 Highlander like door opening, temperature setting, etc. As mine is LE Plus which does not require CANBUS in wiring harness. Is there any factory setting in MCU as I have selected Toyota raised. Anybody with Toyota can help.
Sent from my A0001 using XDA-Developers mobile app
I have an XTRONS TE706PL MTCE_GS V2.88_3, and I'm wondering if it's possible to display ANYTHING through the video output, and how?
I've ran the video rca to the aux on my rear DVD, but I can't get any output.
I almost purchased this model but after a lot of reading reviews it became clear that it does NOT have Full RCA out, it can only output to the RCA outs from Aux-in so if you have an external TV box going into the head unit via Aux-in this it will output to RCA outs, which is a backward step for Xtrons, their tec department confirmed this to me in an email.
Paul2482 said:
I almost purchased this model but after a lot of reading reviews it became clear that it does NOT have Full RCA out, it can only output to the RCA outs from Aux-in so if you have an external TV box going into the head unit via Aux-in this it will output to RCA outs, which is a backward step for Xtrons, their tec department confirmed this to me in an email.
Click to expand...
Click to collapse
The only MTCD/E units that do proper video out are the RK3188/PX3 Nougat units, these have HDMI out, however, as Xtrons are a seller only (they buy from a variety of different manufacturers, slap their badge on them and sell as "Xtrons" units) they have no control over video out (or anything else other than pricing and what made up model number to give each unit), only ShenZhen GESHI Electronics And Technology CO LTD, the manufacturers of the "GS" MTCD/E unit Xtrons sell, have any control over this.
typos1 said:
The only MTCD/E units that do proper video out are the RK3188/PX3 Nougat units, these have HDMI out, however, as Xtrons are a seller only (they buy from a variety of different manufacturers, slap their badge on them and sell as "Xtrons" units) they have no control over video out (or anything else other than pricing and what made up model number to give each unit), only ShenZhen GESHI Electronics And Technology CO LTD, the manufacturers of the "GS" MTCD/E unit Xtrons sell, have any control over this.
Click to expand...
Click to collapse
I have the xtrons PB76FFFP which is a PX5 MTCE_GS_V2.78_3 unit, and it has Full RCA, and duel zone, everything on the head unit is displayed on my headrests, so it would seem that it is not just the PX3 that has full RCA out.
Paul2482 said:
I have the xtrons PB76FFFP which is a PX5 MTCE_GS_V2.78_3 unit, and it has Full RCA, and duel zone, everything on the head unit is displayed on my headrests, so it would seem that it is not just the PX3 that has full RCA out.
Click to expand...
Click to collapse
Lots of people have problems with video out, glad to hear dual zone works on yours.
But I did not say that the PX3 had RCA out - lots of units have RK3188/PX3 pocessors, including non MTC units - I said that MTCD/E Nougat RK3188/PX3 units have HDMI out, whereas MTCB/C JB/KK/Lollipop RK3188/PX3 units, MTCD/E RK3188/PX3 Lollipop units and RK3368/PX5 MM/Oreo units have RCA out.
BTW, you just have a GS MTCE RK3368/PX5 unit - "PB76FFFP" is a number made up by Xtrons.
Hey peeps, I'm looking at biting the bullet on a 9" Dasaita PX5 4gb/32gb head unit for my Subaru Forester.
It is replacing the stock Nav unit which has fuel consumption data among other things.
I'm wondering if I will be able to use an app like Torque tools to see that data over the existing Canbus connection or do I need to use a Bluetooth odb2 plug or something along those lines?
If I do have to use an odb2 plug can I connect my phone via Bluetooth at same time? Any advice or suggestions on Android head unit model choice and Dasaita reviews would be appreciated.
9" Android 8.0 Car Radio GPS for Subaru Forester Navigation 2008 2009 2010 2011 2012 Head Unit 4G 32G Octa Core
Search it on AliExpress. I can't post links yet apparently
Hello, i dont have a Subaru while using a Dasaita HU. IMO, if you have a Canbus converter box, and it already show some car's info before on the original HU, it will show the same on your new HU.
Case of using odb2 connected by Bluetooth, you can even connect Bluetooth with your smartphone at the same time.
I have a Joying JY-UQ130 RK3188-based head unit. Does anyone know if the Joying Apple CarPlay USB dongle will work with this radio, or is the unit too old?
My Radio (JY-UQ130) - https://www.amazon.com/gp/product/B019DWXBZ6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Joying Apple Carplay USB dongle - https://www.aliexpress.com/item/JOY...ereo-head-unit-via-usb-cable/32850591803.html
Hello,
I have a Dasaita px5 HU and about 6 months later Dasaita upgraded to px6. My installer was unable to connect my headrest monitors to the HU. I reached out to Dasaita regarding what options or Converters that may be needed and they advised me to upgrade to px6. Are there any other options to make this happen?
Thanks