No sound out of rear speakers (Android 8.0 MTCE) - MTCD Android Head Units General

Hopefully, I'm posting in the correct sub-forum.
I have a Peugeot 308 (2012).
This is the head unit.
These are the full specifications:
Rockchip PX5 (2017)
ARM Cortex-A53 Octa-core ≤ 1.5GHz (28nm)
PowerVR G6110 GPU (2014)
4 GB DDR3
AOSP Android 8.0
1024x600
STMicroelectronics TDA7388 audio power amplifier (2013)
STMicroelectronics TDA7786 AM/FM funer (2016)
In the software itself, it shows:
Manufacturer: rockchip
Model number: PX5
Android version: 8.0.0
Android security patch level: October 5, 2017
Kernel version: 4.4.93+; [email protected] #121; Fri Jan 26 10:41:07 CST 2018
Build number: px5-userdebug 8.0.0 OPG5.170623.007 eng.hct.20180126.113204 test-keys
MCU version: MTCE_CHS_V2.76_1; Dec 20 2017 15:49:46
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
When I plug my stock Peugeot head unit in, the rear speakers work perfectly.
However, they do not on this Android head unit.
They're not totally silent, they're about 2-3% "static"-type sound.
Any ideas?

King Mustard said:
Hopefully, I'm posting in the correct sub-forum.
I have a Peugeot 308 (2012).
Rockchip PX5 (2017)
Model number: PX5
Android version: 8.0.0
Build number: px5-userdebug 8.0.0 OPG5.170623.007 eng.hct.20180126.113204 test-keys
MCU version: MTCE_CHS_V2.76_1; Dec 20 2017 15:49:46
When I plug my stock Peugeot head unit in, the rear speakers work perfectly.
However, they do not on this Android head unit.
They're not totally silent, they're about 2-3% "static"-type sound.
Any ideas?
Click to expand...
Click to collapse
What did the reseller suggest?

marchnz said:
What did the reseller suggest?
Click to expand...
Click to collapse
Was on AliExpress - so never a single response.

King Mustard said:
Hopefully, I'm posting in the correct sub-forum.
I have a Peugeot 308 (2012).
This is the head unit.
These are the full specifications:
Rockchip PX5 (2017)
ARM Cortex-A53 Octa-core ≤ 1.5GHz (28nm)
PowerVR G6110 GPU (2014)
4 GB DDR3
AOSP Android 8.0
1024x600
STMicroelectronics TDA7388 audio power amplifier (2013)
STMicroelectronics TDA7786 AM/FM funer (2016)
In the software itself, it shows:
Manufacturer: rockchip
Model number: PX5
Android version: 8.0.0
Android security patch level: October 5, 2017
Kernel version: 4.4.93+; [email protected] #121; Fri Jan 26 10:41:07 CST 2018
Build number: px5-userdebug 8.0.0 OPG5.170623.007 eng.hct.20180126.113204 test-keys
MCU version: MTCE_CHS_V2.76_1; Dec 20 2017 15:49:46
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
When I plug my stock Peugeot head unit in, the rear speakers work perfectly.
However, they do not on this Android head unit.
They're not totally silent, they're about 2-3% "static"-type sound.
Any ideas?
Click to expand...
Click to collapse
Have you tried, just for a test, to exchange output wires? if not try remove the audio out wires from the harness (1st make a photos for reference) and replace position: front speakers to rear speaker and rear speakers to front speakers; then check if the issue is still present and you dont ear sound from, in this case, front speaker (the audio output was originally connected to rear)
If not swap again the wires cheking the right polarity (maybe was a incorrect harness position); if the issue still present probably you have a faulty unit.
Hope that help

iRcKenny said:
Have you tried, just for a test, to exchange output wires? if not try remove the audio out wires from the harness (1st make a photos for reference) and replace position: front speakers to rear speaker and rear speakers to front speakers; then check if the issue is still present and you dont ear sound from, in this case, front speaker (the audio output was originally connected to rear)
If not swap again the wires cheking the right polarity (maybe was a incorrect harness position); if the issue still present probably you have a faulty unit.
Hope that help
Click to expand...
Click to collapse
If I'm honest, I'm not sure what much of what you said means.
Please see the attached photo.
At the moment, I only have F connected. All seven cables for F have a female RCA connector. Only green is currently being used.
AV-OUT (1) (yellow)
AV-OUT (2) (yellow)
FL OUT (white)
RL OUT (white)
FR OUT (red)
RR OUT (red)
Subwoofer (green) - Currently connected to my subwoofer
I am currently getting sound out of my front speakers (presumably through the Power section) and my subwoofer but there is nothing coming out of the rear speakers.
If I connect the original, basic Peugeot stereo, I get sound out of the front and rear speakers. This suggests the Power cables alone can do both; though they're not working for my new head unit.
Connected to Power is a ton of cabling. This is some of it:
AUX IN L (white) - RCA male (not currently in use)
AUX IN R (red) - RCA male (not currently in use)
BACK V IN (yellow) - RCA female (not currently in use)
I have spliced the AUTO ANT with the subwoofer, to power it.
From that information, does anyone know why I may not be getting sound out of the rear speakers?

King Mustard said:
If I'm honest, I'm not sure what much of what you said means.
Please see the attached photo.
At the moment, I only have F connected. All seven cables for F have a female RCA connector. Only green is currently being used.
AV-OUT (1) (yellow)
AV-OUT (2) (yellow)
FL OUT (white)
RL OUT (white)
FR OUT (red)
RR OUT (red)
Subwoofer (green) - Currently connected to my subwoofer
I am currently getting sound out of my front speakers (presumably through the Power section) and my subwoofer but there is nothing coming out of the rear speakers.
If I connect the original, basic Peugeot stereo, I get sound out of the front and rear speakers. This suggests the Power cables alone can do both; though they're not working for my new head unit.
Connected to Power is a ton of cabling. This is some of it:
AUX IN L (white) - RCA male (not currently in use)
AUX IN R (red) - RCA male (not currently in use)
BACK V IN (yellow) - RCA female (not currently in use)
I have spliced the AUTO ANT with the subwoofer, to power it.
From that information, does anyone know why I may not be getting sound out of the rear speakers?
Click to expand...
Click to collapse
RCA F Connectors are only used with and external amplificator, they are pre-out

I recently bought a crude DSP unit which sits in between the head unit and my ISO connection, when i installed it i got no sound from rear speakers, I discovered I needed to change the setting in Factory where it says Amplifier (it was no, i changed it to auto detect) I can no longer control the fade F R but all rear speakers work now.
Try it and see if it helps.

Between now and the last post, I bought a Pumpkin ND0286B head unit. I had the same issue with that.
I bought a Pioneer MVH-A200VBT (£130) today and installed it.
Driving to some shops (20 minutes away), everything was fine.
After shopping, I turned the engine on and had the same familiar fault - could only hear the subwoofer.
After a few seconds, the head unit started to flash: AMP Error.
So it wasn't an issue with the Chinese Android-based head units after all
Does this help you, perhaps, narrow down what the issue could be and how I could go about fixing it?

Amplifier, go to fader, then change position of big dot/press CENTER?

King Mustard said:
Between now and the last post, I bought a Pumpkin ND0286B head unit. I had the same issue with that.
I bought a Pioneer MVH-A200VBT (£130) today and installed it.
Driving to some shops (20 minutes away), everything was fine.
After shopping, I turned the engine on and had the same familiar fault - could only hear the subwoofer.
After a few seconds, the head unit started to flash: AMP Error.
So it wasn't an issue with the Chinese Android-based head units after all
Does this help you, perhaps, narrow down what the issue could be and how I could go about fixing it?
Click to expand...
Click to collapse
What items have you thought about investigating? Wiring, shorts to speakers and or speaker fault?
Without basic troubleshooting skills and tools, perhaps consult local expertise.

guys please help me , i dont have fader sound option in setting , what could i do plz

aysoy said:
guys please help me , i dont have fader sound option in setting , what could i do
Click to expand...
Click to collapse
Hi Guyz,
Is it an MTCD/E?

marchnz said:
Hi Guyz,
Is it an MTCD/E?
Click to expand...
Click to collapse

marchnz said:
Hi Guyz,
Is it an MTCD/E?
Click to expand...
Click to collapse

@aysoy guy,
Not an MTCD.
Try Android Head-units forum.

Related

Joying MTCB HU, USB connections.

Just installed a Joying:
. SKU: JY-UL124 . Quad Core Android 5.1.1 Lollipop OS Capacitive 7" High Definition for Universal Double Din . CPU: RK3188 1.6GHz Cortex A9 Quad Core, Resolution 1024*600. RAM:DDR3 1G, 16 GB memory
To my 2014 Australian Hyundai Elantra.
I waited to get the latest HU from Joying that has an unrated mother board and USB/ Comms board. With Lollipop 5.1.1. the unit performs very well with none of the problem previously mentioned on these pages. The internal and external mics are clear and the Bluetooth systems are perfect. Unit has been rooted and I don't seem to need for apps so I won't changed the software.
The dimming for the button and the screen to follow the vehicles rheostat was fixed by making a circuit to invert and amplify the rheostat output to the HU ill line. Work's well, Kudos to the guys at the Subaru forums.
I had one bug fixed by Joying when the GPS nav was muted whenever I plugged in the DVR front camera. Joying quickly sent me a link to re flash my firmware and the problem was fixed. I have them currently looking into a bug when I view the DVR input shown on the HU I get lots of flashing to the screen in all pixel settings. I have been told this will be fixed in the next firmware update soon.
One problem that I can't solve is when I try to use my vehicles Multimedia Jack located in my center console. There is a Aux and USB jack there. All wiring from console to HU is complete. If I connect a USB stick to the Jack in the console then then HU struggles to connect and gives up. If I interrupt the USB plug and socket behind the HU then I am able to use the USB correctly. Looking at the car wiring diagrams there is a amplifier cct behind the Multimedia Jack supposedly to amp up the USB to HU. Doesn't seem to work?
Any ideas appreciated.
Duke
If anyone has any ideas on
i have nothing to add, other than interested to see what the result is. Are you saying that your car comes with a built in hub in the console, and you are trying to make that USB port in the console work to the Joying head unit? my vehicle is similar, and I would like that to work as well
Update
Yes I have a console hub I guess.
The book calls it a multimedia center. Just an Aux port and a USB port or Jack in the tidy bin in the center console. If I by pass the Jacks and directly put the USB stick into the USB tail from the radio then it works fine. When I plug into the console port it tries to read it and fails. The HU then reports a read fail, have tried other known working USB sticks.
I have inspected behind the console jacks and found a cct board attached to the Jacks and then to the car wiring. From looking at the diagrams of the car previous to mine I see a cct board containing what looks like an amplifier. Tracing the car wiring to the radio input connectors seems to be OK and the wiring correct. Voltages at the radio connector are right in that there is 5v +ve, negative - earth and the center pins are data as they should be.
The console Jacks
w.hemanual.org/multimedia_jack_description_and_operation-2037.html
The wiring for same (mine is same but more complex)
w.hemanual.org/multimedia_jack_schematic_diagrams-2036.html
Really bugs me not to be able to access that USB input Jack esp as the radio is a great unit.
You need to post this question in the MTCD (Lollipop) hardware thread. This thread is for MTCB (KitKat) units. The hardware in the MTCD headunits are very different than the MTCB headunits.
bsavoir22 said:
You need to post this question in the MTCD (Lollipop) hardware thread. This thread is for MTCB (KitKat) units. The hardware in the MTCD headunits are very different than the MTCB headunits.
Click to expand...
Click to collapse
When I tried to repost this in MTCD I get this.
vBulletin Message
To prevent spam, you must have a higher post count in order to make a new thread in this development section. But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding!
Am I still in the wrong section?
Yes, the MTCD thread is for the headunits with 5.1.1. The hardware changes and software are different. Send one of the admin a message and tell the why you need to get the permissions to post. I had to do that some time ago. Just make sure you follow the rules when post or you can have you account suspended or whatever the moderators deem necessary.
Sent from my SM-N910T3 using Tapatalk
Posting
Ok thanks for that. I don't seem to be able to find how to "Send one of the admin a message" Can you help?
Just for info, there are both MTCB/C and MTCD/E Lollipop units.

How is the sound on joying 1 din android radio? And how is touchscreen?

How does it sound. Does it work good with stock speaker and does it handle pioneer or any brand speaker (up to 4) cause i can only amplifie my subwoofer in the back since the speakers are in the doors...
And i need a new radio. But i would like th have decend sound. At least that it will handle loud sound (without basse cause my subwoofer will do that)
And does anyone know if the screen can be tilted a bit? I use a mercedes w203 c180 and the dash is not flat it goes up so radio with a flip screen are aiming at my roof...
Anyway i migh br interested in one now that u can eq the sub..
And does it have 1 sub out at 2 rca speaker out or just 1 sub 1 pair of speaker (rca cable i mean).
(i mean 1 sub an 1 speaker rca are good but maybe i wanna amp my front speaker one day)
And how is the touch screen?
How about this new Pumpkin android 6.0 radio https://www.amazon.com/dp/B06Y5TLHJ2
alvinjones377 said:
How about this new Pumpkin android 6.0 radio https://www.amazon.com/dp/B06Y5TLHJ2
Click to expand...
Click to collapse
That price doh and its usa Amazon.

How to working Rockford Fosgate System from Mitsubishi with Dasaita PX5 Unit.

Hello Guys,
iam new here and i need help.
since one Week i have a Dasaita HU with PX5, 4GB RAM, 32GB and it is bulid into my Mitsubishi Lancer with orignal Rockford Fosgate system.
And there is the Problem, how can work the Radio like the OEM Radio with the Rockford System? Maybe here other People with Mitsubishi and Rockford System and they using a Radio like mine?
Hope you can help me, it is a big Problem for me that it not work right
Thank you!
Robert
Is Nobody here with a Mitsubishi and Rockford and an Android Radio?
Nudelsose said:
Is Nobody here with a Mitsubishi and Rockford and an Android Radio?
Click to expand...
Click to collapse
What is the Rockfors....an amplifier? a Subwoofer?
Did it have some RCA inputs?
Hey,
the Rockford Fosgate Systen is a complete OEM Soundsystem from Mitsubishi.
It Contains Speaker in all 4 Doors, in the Front Doors with Tweeters and in the Rear is a Subwoofer.
Did you buy your unit with Canbus decoder?
According to Dasaita, you need the canbus CB001 for models 2007-2013 and CB003 for models 2014-2017
The can bus is needed for Rockford Fosgate System to work with the headunit
You should buy harness with canbus
Ok,
but did you can change the punch of the subwoofer?
I am in a 2013 X and have a Dasaita PX3 unit. Subwoofer controls when you have the canbus box attached are not the sub bar in the Amplifier app but the far left 60hz bar.
Hope that helps.
It's like this one... But Dasaita may have it on their site Hot-Audio.
https://www.google.com/search?q=das...rome-mobile&ie=UTF-8#lbl=OVERVIEW&pie=plaji-i
I have the same issue controlling the subwoofer on the PX6 with outlander and fosgate system. Controlling the sub with 60hz on the eq is hardly a fix as it is just lowering 60hz over all the channels . It would benefit to be able to adjust the sub volume as it seems to be louder than it should be. I am in contact with dasaita so will see what they say.
Sent from my Pixel 3 XL using Tapatalk
Hi
So I have a PX6 from navifly or whatever. Anyway had probs as well, went to a place called audiocity and now it works because(still cant control the sub punch but at least now it does punch) the wiring for the amp behind the radio was wrong. The amp gets its signal from the front speakers and behind the radio the driver side front speaker wiring was wrong. Its supposed to be both the same +/- but one speaker was the other way around and the signals were working against each other rather than working together. I think now you guys mby can try to find that. Now the punch was real gooooooood.
If needed I can do few pics or a video about this.
I cant control the sub that much but I can control the bass still. So it is punching good.
Hi, if it's not a strech for you I would really appreciate some details about this.
My problem is that balance does not work (if I put 100% on rear the volume goes to 0) and most annoying probleme is that I have a bass delay, which means that when the bass should kick in it actually fades in from 0 to whatever...and it takes like 5 seconds to be at the volume it's supposed to be. This i annoying because it does not only happen at the start of the song, but also on the entire track. From factory settings I chose the sound option without amplifier because the other two options (with amplifier and auto detect) don't care about amplifier settings after restart, so choosing a customized present (or rock, classical etc) does not make any sound changes. Any ideas?

Android unit for Ford Fiesta mk7

Hello everyone,
I would like to install an android car radio in my 2012 fiesta, not so much for having the color display, the touchscreen or the possibility of seeing videos but to change the main unit and have better sound (I have installed quality speakers, I have soundproofed the doors and installed an amplifier, but there is a background noise, which also increases with the engine revs and having tried with 2 different amplifiers, I have to assume that it is the fault of the car's head unit).
The problem is that Chinese sellers are not very clear about compatibility;
for the fiesta from 2013 onwards there should be no problem, but I have a 2012.
In the past few years I have been looking for an android radio that would display informational messages on the display and allow the car settings to be adjusted (as is done with the original radio), but it was not possible for fiestas from 2008 to 2012.
I would like to keep the vehicle information messages (such as for open doors or climate controls), I would also like the steering wheel and facia dashboard controls to work; if it could also work the bluetooth would be great! (I have a sony car radio, the one with black facia, with usb and bluetooth, no synch).
Among the various I contacted is Witson, but they were unclear and contradictory about compatibility; one employee told me that it is compatible, another told me that it is not compatible.
Even the employees of belsee, jdaston and Ljda have told me that their units are compatible with my car. but I found no reviews about it.
is there someone here on the forum that can help me, maybe someone who has more information or who has installed one?
Thanks
PS
I am attaching the images of my car and radio model (2012 Ford Fiesta, titanium version)
Hello,
I have similar thoughts and installed android head unit to my mk7 facelift fiesta (2013) I'm new on this things but I will try to help.
After the installation of head unit, I still have the information messages for ac and doors, steering wheel and dashboard buttons are still usable(adapted to new system for different functions). My usb and aux port is still working. The system I have has bluetooth, wifi, gps, carplay/android auto(wifi and cable), other apps(play store), rear view camera. Only rear parking sensors not showing on system because they're not car spesific theyre universal parts, I you have original sensors they will also shown in screen. All this compatibility comes from canbus adapters, theyre spesific to car model which comes with head units and it manages all the communication/adaptation with car, So If head unit you looking for is specified for your car, everthing has to be similar in your condition too.
Before I had this unit. My car is fiesta 1.0 ecoboost titanium x , in Turkey it comes with this unit.
After installation, this is my unit ''AC8227L'' 1gb ram and android 6.0 version, exact same design with picture
I did some modding on theme of course and this is how it looks now
I also modded new boot logo with little photoshop
Device details
Car notification example
If you had anything as a question, just let me know
How is the sound quality? I installed a similar item, but 9 inch. Sound quality is really poor compared to factory radio. The OP is having a Sony radio so I think changing it to a chinese android radio would be multiple steps backwards.
thanks for sharing
Opperpanter said:
How is the sound quality? I installed a similar item, but 9 inch. Sound quality is really poor compared to factory radio. The OP is having a Sony radio so I think changing it to a chinese android radio would be multiple steps backwards.
Click to expand...
Click to collapse
Mostly I use with bluetooth so not sure but. I think factory audi is %10 better than new android unit
cleartdragon said:
Hello,
I have similar thoughts and installed android head unit to my mk7 facelift fiesta (2013) I'm new on this things but I will try to help.
After the installation of head unit, I still have the information messages for ac and doors, steering wheel and dashboard buttons are still usable(adapted to new system for different functions). My usb and aux port is still working. The system I have has bluetooth, wifi, gps, carplay/android auto(wifi and cable), other apps(play store), rear view camera. Only rear parking sensors not showing on system because they're not car spesific theyre universal parts, I you have original sensors they will also shown in screen. All this compatibility comes from canbus adapters, theyre spesific to car model which comes with head units and it manages all the communication/adaptation with car, So If head unit you looking for is specified for your car, everthing has to be similar in your condition too.
Before I had this unit. My car is fiesta 1.0 ecoboost titanium x , in Turkey it comes with this unit.
After installation, this is my unit ''AC8227L'' 1gb ram and android 6.0 version, exact same design with picture
I did some modding on theme of course and this is how it looks now
I also modded new boot logo with little photoshop
Device details
Car notification example
If you had anything as a question, just let me know
Click to expand...
Click to collapse
cleartdragon said:
Hello,
I have similar thoughts and installed android head unit to my mk7 facelift fiesta (2013) I'm new on this things but I will try to help.
After the installation of head unit, I still have the information messages for ac and doors, steering wheel and dashboard buttons are still usable(adapted to new system for different functions). My usb and aux port is still working. The system I have has bluetooth, wifi, gps, carplay/android auto(wifi and cable), other apps(play store), rear view camera. Only rear parking sensors not showing on system because they're not car spesific theyre universal parts, I you have original sensors they will also shown in screen. All this compatibility comes from canbus adapters, theyre spesific to car model which comes with head units and it manages all the communication/adaptation with car, So If head unit you looking for is specified for your car, everthing has to be similar in your condition too.
Before I had this unit. My car is fiesta 1.0 ecoboost titanium x , in Turkey it comes with this unit.
After installation, this is my unit ''AC8227L'' 1gb ram and android 6.0 version, exact same design with picture
I did some modding on theme of course and this is how it looks now
I also modded new boot logo with little photoshop
Device details
Car notification example
If you had anything as a question, just let me know
Click to expand...
Click to collapse
Where did you buy it

Dasaita PX6 MAX10 - MCU Amp App

I have a Dasaita PX6 MAX10 which originally shipped with below software version.
Shipped Versions
Build Number
rk3399-userdebug 10 QQ2a.200305.004.A1.eng.htc.20200725.171818 test-keys
Mcu Version
MTCE_HA_V3.57_1
I updated to HA3_rk3399_10.0_ota(20201113)升级包 and MTCE_HA_V3.67 and after some testing I realised in the amplifier app the option for FREQ CUT was so aggressive compared to the shipped version. Even on the lowers setting 60hz it seemed like it was taking so much more out of the sound then before.
I flash back MTCE_HA_V3.57 and kept it on the latest software HA3_rk3399_10.0_ota(20201113)升级包 and it functioned as it was shipped before, FREQ CUT was working as expected. Then I tried to incrementally update the MCU to each higher version but anything above MTCE_HA_V3.57 would reintroduce the issue.
I should mention that I am using RCA outputs for front and rear audio.
I also realised that even on the shipped MTCE_HA_V3.57 the FREQ CUT option in the AMP app has no effect on the rear speakers it only works with the front audio.
If anyone has some advise would be appreciated. Thanks
What does reseller suggest when contacted for support.
Also, was the unit fully powered off, disconnected from battery after MCU changes?
marchnz said:
What does reseller suggest when contacted for support.
Also, was the unit fully powered off, disconnected from battery after MCU changes?
Click to expand...
Click to collapse
I did not try to disconnect the battery after MCU flash.
I haven't contacted the reseller about the MCU flash but they got back to me and said from their engineer that only the front RCA has CUT FREQ.

Categories

Resources