Related
i was playing the qpst tool and my imei and meid is gone, it seems like my qpst version is old to write imei to the mi6. but now i can not recover it to its original state. what should i do?
if i copy sdf and sde blocks back to the phone, will it fix it, or should i rewrite qcn file with the qpst tool (qcn file can also be corrupted because of the wrong version qpst tool).
i need to rewrite imei, meid to recover the phone. is there any other tool for it?
Bro, use QPST 460 ver. First dd modemst1, modemst2 and fsg partitions, restart the phone, then restore this xqcn: mega.nz/#!vQ1zyART!bXiW0JY1RGWRdHRZZGo4toUOSZiVqEJjMUdyrI8u97Q
magş said:
i was playing the qpst tool and my imei and meid is gone, it seems like my qpst version is old to write imei to the mi6. but now i can not recover it to its original state. what should i do?
if i copy sdf and sde blocks back to the phone, will it fix it, or should i rewrite qcn file with the qpst tool (qcn file can also be corrupted because of the wrong version qpst tool).
i need to rewrite imei, meid to recover the phone. is there any other tool for it?
Click to expand...
Click to collapse
Did you fix it?
Help
Hello does this solution work with such a small xqcn file ?
mekato said:
Bro, use QPST 460 ver. First dd modemst1, modemst2 and fsg partitions, restart the phone, then restore this xqcn: mega.nz/#!vQ1zyART!bXiW0JY1RGWRdHRZZGo4toUOSZiVqEJjMUdyrI8u97Q
Click to expand...
Click to collapse
Any solution ?
Hint* if you try to flash with Mi FLASH PRO tool in recovery mode it will read IMEI from the phone !!
So IMEI is still written on the phone but where and how to recover back ?!
Hi all !
So IMEI, Baseband unknown and MAC address is gone.
No any backup of it !
Have unlocked bootloader, twrp, xiaomieu rom and phone is rooted.
Following "web find" solutions when tried to backup or restore qcn with QPST (v. 2.7 474)
only getting:
"Memory backup failed"
"Disk error writing to file"
When tried to "dd if=/dev/zero of=/dev/block/sde 34 (sdf4, sdf5)
getting "no space left on device"
(no sense, only trying to wipe, not to write anything)
Also tried the same through terminal on twrp and getting same no space error !
Any idea why, or any other way to recover Imei ?
Thanks !!!!
Kiki.G said:
Hi all !
So IMEI, Baseband unknown and MAC address is gone.
No any backup of it !
Have unlocked bootloader, twrp, xiaomieu rom and phone is rooted.
Following "web find" solutions when tried to backup or restore qcn with QPST (v. 2.7 474)
only getting:
"Memory backup failed"
"Disk error writing to file"
When tried to "dd if=/dev/zero of=/dev/block/sde 34 (sdf4, sdf5)
getting "no space left on device"
(no sense, only trying to wipe, not to write anything)
Also tried the same through terminal on twrp and getting same no space error !
Any idea why, or any other way to recover Imei ?
Thanks !!!!
Click to expand...
Click to collapse
contact me to fix it: fb.me/HomXiaomiColombia
Moderator Message:
Extreme caution required as this method may erase your IMEI!
Click to expand...
Click to collapse
Welcome
No to monopoly
Sometimes we may encounter a problem when the ROM is finished flashing, and a problem may occur, which is the inability of the device to work and returns to the black screen and the devices go to edl 900E
This file can return the phone to work
The method is as follows
1- You will need the qfile program, you will only choose to delete the files
2- Run miflash, it will flash the file
note :
Consider it the last resort
The possibility of losing imie
upload by badar.albaloshi
unbrick redmagic 5G-5S
pass aa999999
how exactly ccn be delete the files with qfil???
If you accidentally formatted your device , then how to restore imei
How to deal with: Download not complete error
Sn writer
Elaborate more with Download part
Download Not Complete: something blah blah blah after 10s, 0*92655 something something...
Sn writer / Maui Meta doesn't work for null imei for realme3.
Thanx
The device on which I am flashing the firmware is REALME 3, I used SP Flash tool for flashing, while flashing with SP Flash flash tool, the tool show EMMC unknown,but the flashing completes successfully,
then after pressing power ON, this message appears at the bottom ,
Download Not Complete! Please press Volume+ and power key for 10s to power off. Then download again. Otherwise will block here 60s until shutdown automatically. error code : 0*9925669( I can't see the last digit bcoz of the glass cover).
PLS GUIDE.THNX
Give possible solution for imei
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam .
If you can use SP flash tools, SN writer DOES work on your fone, but it's figuring out a certain timing and sequence of events. that prove my point. Your at the point you need to be, it's waiting on you doing what I'm trying to say... your too demanding wanting the quick fix...
Everytime you post pauses me in case I need to change what I write to you, so slow down, your distracting me lol
Sn Writer is actually a pain to use, and there are many versions. But I learnt a sneaky fast path with it's appearing to not work. It does work, but kind of in reverse of what you think it does.
Sn Writer, strange but true, calls 'serial' as in serial number, 'barcode' in some versions, so some think because they cant see 'serial' that it wont work. I know because at first, I did. Took me a while to learn this.
Load up Sn Writer, it'll ask to load a file, the window that opens should be where you see MTK DA ALL IN bin, select it. Then choose scatterfile from stock firmware.
Now set correct attestation keys found in stock rom, your aftersales stock, with your attestation keys /google keys blah blah...
You then have to choose what you want to flash. If you see serial, that is NOT what you want to flash, you have to flash BARCODE! (your fones serial number) I know you said IMEI, but in order, SN writer flashes BARCODE before IMEI 1, so you MUST flash serial and mac PACKAGE given in stock rom?
So what I do is open the window to type in BARCODE box, my serial number.
Imei 1 is obvious, but you MUST do imei 2 as well, or it will add a few digits to imei 1's mac, put it in imei 2 that may not corespond to your attestation key.
Over to fone.
I turn my fone OFF, hit start in SNWriter, and plug phone into pc, and wait. You can tie your hands to your chair for a min, because if you interupt this TIMING...
Just when you think it wont work, folks give up. Wait that wee bit longer... it will show pass or fail. If its all genuine stock, it cant fail, only impatience caused by not knowing this sequence, and SN's bug-inesss
I'm too tired right now, and I see you posting again lol, my eyes are dry and its sleep time, and since you think it wont work, I'll catch up later today on this post, beacuse I'm gettin ratty with myself lol
Patience.. I'll be back...
Ank Sak said:
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam[/USE
[/QUOTE]
Click to expand...
Click to collapse
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
Ank Sak said:
Give possible solution for imei
Click to expand...
Click to collapse
I have faced this too, but luckily i had already taken a backup from recovery of nvram ,nvcfg, nvdata partitions .After flashing the recovery i just restored the partitions.
SO, GUYS IF YOU CAN BOOT INTO RECOVERY FIRST THING YOU HAVE TO DO BEFORE FLASHING ANY PARTITION IS TO MAKE A BACKUP OF THEM
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
2 years ago I formatted by other mediatek chip device lenevo and it did show NVRam error in wifi, after repairing imei it didn't show , & now this mediatek chip device realme does show NVRam error in wifi :: -- NVRAM WARNING: Err =0*10
Ank Sak said:
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
Click to expand...
Click to collapse
If you want to unlock bootloader just use mtkclient ,its very simple.
And if you want my imei files i can provide you but you got to have twrp installed.BTW where are you from?
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Ank Sak said:
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Click to expand...
Click to collapse
What error did you faced when using mtkclient?
yas8say said:
What error did you faced when using mtkclient?
Click to expand...
Click to collapse
I cannot boot in fastboot mode ( I forgot to tell , in realme )
Mtk client:: shows this...
Daxflash - uploading stage 1 from mtkallinone_ da_5.2136.bin
Preloader
Preloader- [lib] : ?[ 31mError on DA_send cmd?[0m
Daxflash
Daxflash- [lib] : ?[31mError on sending DA.?[0m
Main
Main - [lib] : ?[31mError uploading da?[0m
Device formats,
First time some error
Now I ran second time python mtk xflash seccfg unlock
And now bootloader is unlocked !!! Cheers
I don't want to brick and I want to root , what must I do , pls give in steps.. Thnx
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Ank Sak said:
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Click to expand...
Click to collapse
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
yas8say said:
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
Click to expand...
Click to collapse
My device is realme3, it's on Android10 c.17, will I will be able to root with magisk ? Ok I will try.
No straight business,
Ok i tried, gave same error preloader dax main. .., so I switched off , as soon as the device turns off n pressed all three buttons to go into brom mode, the other cmd with python command ran and wrote twrp Spartan recovery,, then switched on, key combo didn't work, bcoz it was showing ' the serial is not match......' so I typed adb reboot recovery, it booted to realme UI recovery.
Surely have to downgrade to Android 9 to root & install recovery
Is anyone can post efs backup of mi 11x
Is anyone can give backup of efs partition of mi 11x because my imei nunber is been erased due to flashing in edl mode by selecting efs partition erase
Loading Google Docs
entekss said:
Loading Google Docs
Click to expand...
Click to collapse
Thanks
Unknown007891 said:
Thanks
Click to expand...
Click to collapse
How you use this bro to get your imei back because I tried to restore my imei using this in qfil but it doesn't seems to be working it's shows connecting always i made my qcn with help of this by editing imei in it through a software but how to flash it
soravang81 said:
How you use this bro to get your imei back because I tried to restore my imei using this in qfil but it doesn't seems to be working it's shows connecting always i made my qcn with help of this by editing imei in it through a software but how to flash it
Click to expand...
Click to collapse
Bro i did a lot of research on this and have come to the conclusion that you need to be in diagnostic mode in order to edit the qcn file. Your phone must be rooted. Check out the following link to find out more (Skip to step 3). Please tell me if you were able to change your imei or not. Thanks.
Xiaomi Diag Port Enable For New Xiaomi Phones | Enable Diag Mode Xiaomi - 99Media Sector
Xiaomi Diag Port Enable For New Xiaomi Phones | Enable Diag Mode Xiaomi In today’s post, we are going to
www.99mediasector.com
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?
Your browser is not able to display this video.
I have the same problème did u solve it ?
with me we are in 3, please share if you find something !
you reached a solution so wished and few seconds later you get into nightmare back again !
Same here, but on redmi 9. I guess i made a mistake thaough, i tried to install EU rom and then this happened. Did you make this mistake too?
after otg update of miui 13 it happens. maybe @VD171 help us ?
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
coliotte said:
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
Click to expand...
Click to collapse
Me too
We need to send a message to Xiaomi support and let them know about this issue so that they can provide a solution for this problem in the future. They are the producer of this phone and can provide a remote tool for nvram repair
Redmi note 9 merlin will receive the MIUI 14 update and still supported by Xiaomi
Found a good solution I sold it to a repair shop for parts and got an iPhone already updated that iPhone and guess what IMEI is still there .
Recovered by simple way first install Engineering rom after that downgrade to 12.5
devjmi said:
Recuperado de manera simple primero instalar la ROM de ingeniería después de esa degradación a 12.5
Click to expand...
Click to collapse
Have you tried this method?
I already put it to the test to see if it revived my redmi note 9 but apparently it continues the same without any result, what's more, it is not capable of flashing the engineering ROM either.
coliotte said:
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
Click to expand...
Click to collapse
Yes I did, you can try searching how to flash engineering rom on dead phone on youtube
Good news people, I found how to revive our bricks with nv data corrupted, it is a simple solution, but that is if our device is going to be left without IMEI, or baseband, but it will turn on and work again, staying with MIUI 11 as a system, in the next comment I will leave the step by step and from now on I will continue investigating how to restore the IMEI and the base band of the equipment.
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Helo, what's the pass for the file? Thank's
Password plz
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Pass- HALAB_HT_TECH
I have 3 Solutions for this problem :
1) - After flash firmware to latest MIUI with official file, use Unlocktool [https://unlocktool.net/] to flash the firmware and restore nvram data (if already backup the NVRAM config)
VIDEO :
- IF NOT use Pandora tool [https://z3x-team.com/products/pandora/] (for repair imei (if didn't have nvram data *but need to search for new IMEI)
VIDEO :
- THIS IS FREE VERSION FOR REPAIR IMEI
VIDEO :
2) (if still bootloop or stuck) Remove plate
video :
OR
3) This is the last options, need to disassemble the device, and replace the capacitor next to CPU
VIDEO :
i hope that help
HackerSecMY said:
i hope that help
Click to expand...
Click to collapse
thanks man, but I have a question, the unlock tool is paid. Second, if I do and fix that, can I go back to MIUI 13?
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Thank you so much! I've spent months trying to find a solution and this one was the only one that worked
I've still got the IMEI issue, but at least it works now.