My previous phone was a OnePlus 3, and it had a magnetic flip cover that would turn off the screen as soon as I shut it. I haven't found a similar product for OnePlus 9 Pro. Any pointers?
Somebody correct me if I am wrong, but I think it does not have that magnetic screen on/off option. I am also looking for a magnetic flip cover. Also for a viable solution for notifications. I think I will go for the Xperia 5 III once released, purely because of the notification light...
I probed around the screen of my OnePlus 9 Pro with a magnet, and no luck -- it doesn't seem to have a hall effect sensor like that on my previous OP5.
But not a problem -- the "Gravity Screen - On/Off" app by Plexnor (Google Play) enables flip covers to work without magnets, using the proximity sensor instead. I use the Nillkin Flip Case on my phone that way, and it all works just fine.
Cheers
Related
I was running the *#0*# Test and I found something called a grip sensor.
I have no idea what its used for, any idea?
Sm T211
Magnetic flip cover detector.
ketut.kumajaya said:
Magnetic flip cover detector.
Click to expand...
Click to collapse
Thanks, sadly i don't use a cover
On Tab 3 8.0, I found flip cover using a different sensor, a magnetic switch. So, grip sensor still not utilized yet (in CM, not sure about stock ROM). It triggers some events when you touch your Tab 3 on the top left side. Any idea how we could uses this sensor? Touch to wake?
I was experiencing random screen shutoffs after fitting my galaxy note 10.1 (2014) for a new case.
It took a while before I finally realized that the random shut offs were being triggered by the case, more specifically, when the edge of my case came in line with the edge of the tablet, which is an awesome feature when you have the cover covering the front of the unit.
But the problem is it manages to shut off screen regardless of which side of the unit the cover is on, as long as the edge of the cover is aligned with the units edge. This can be quite frustrating when trying to read while holding the tablet in certain orientations.
Questions: I was wondering if anyone else has experienced similar issues with their cases/covers (a little research seems to indicate this is not an isolated issue and many, if not all, cases/covers suffer from this issue).
1) If you have not, which cases/covers do you use? Do these cases resolve the issue by never aligning the cover to the same position when flipped backwards as when flipped forwards (i.e. skewed slightly short of the edge when in backwards position)?
2) If you have experienced this issue, how have you addressed it? Can you disable the magnetic sensor?
3) Would weakening the magnet in the case perhaps ensure that it was only sensed in the forward position?
SKida00 said:
I was experiencing random screen sback andk ffs after fitting my galaxy note 10.1 (2014) for a new case.
It took a while before I finally realized that the random shut offs were being triggered by the case, more specifically, when the edge of my case came in line with the edge of the tablet, which is an awesome feature when you have the cover covering the front of the unit.
But the problem is it manages to shut off screen regardless of which side of the unit the cover is on, as long as the edge of the cover is aligned with the units edge. This can be quite frustrating when trying to read while holding the tablet in certain orientations.
et in the case perhaps ensure that it was only sensed in the forward position?
Click to expand...
Click to collapse
yes i have the same problem. pick up A generic folio type case for my P600. Case looks and feels great. Auto wake works brilliantly when I open the cover, but there is the problem of The screen turning off when I flip the cover over to the back and the magnetic edges meet. Dunno how to fix this yet. Tried the magnetoff xposed module but that doesn't seem to work.
I got the Moko slim case and the same thing happens, what I did to circumvent the problem was to put my screen cleaning cloth between the case and the tablet. This prevents the magnet from locking the screen when completely folded backwards, the only thing is that this method will block the camera with the cloth. For me this is not a problem I don't see myself using the camera on my tablet when I can use my SGS3's camera, and this way I never forget my screen cleaning cloth .
I've read about this on other devices on various covers as well. they think it mah be due to the magnet not being properly shielded. dunno any fixes other than get another case.
I hade a cover for my old Ipad and it all so turn off the Ipad when I flipped over the cover.
It did turn out the problem was with the magnet and after getting a new one, the problem was solved.
My poetic slimline work perfectly no issues at all. Love the look and feel, I do want a carry slevee tho for more protection if I wanna bring it out of the house. Or even just to store in the house. But overall love this case.
Sent from my SM-P600 using Tapatalk
Get a piece of sheet metal (strip out a cheapie magnetic whiteboard , a few dollars at a variety store) cut to just less than the back of the tablet screen.
Cover it with a thin plastic film (to safeguard from cutting yourself)
It will adhere to the back of the screen magnetically and flatten the magnet's field
Now you can use the device with the keyboard tucked away behind the screen. (you may have to leave a small air gap say 5mm to 10 mm)
This does not affect the normal screen-keyboard functions when used conventionally
Same problem with Galaxy Tab A (Nougat)
There is an option in the tab to turn it off, but regardless what you choose, the tablet still responds to the magnet. Very annoying when you lay down your tablet flat. For now i just put something between the cover and the back of the tablet, like a handkerchief. This works for me, but ofcourse it's not a solution just a workaround. I'm still trying to find a solution.
Did you find any way to turn off the magnetic lock and unlock function? When I backfold my cover (aftermarket), it automatically locks my tab. Which is very irritating. I have Samsung galaxy tab S5e
There wasn't a good search result on a way to disable it via software or hardware mod so I thought I would post the solution I just did on my daughter's new tablet folio.
She has an old S3 Tab so the options are quite limited so figured modification was the only way. I ended up removing 3 magnets until I figured out which one actually did the on/off Hall effect. The smart thing to do would have been to use a magnet to find where on the tablet the Hall effect sensor was first, then remove just that magnet. The other magnets are for holding the clasp in place when the folio is open or closed.
I just cut an X over the magnet location, removed it, then filled it back in with hot glue. On her tablet, the Hall sensor was on the top left (fat arrow). It's annoying to have to do this but there's no other way. I tried the metal plate trick but that looked pretty bad and didn't always work.
Hope that helps someone
I purchased a case for my Note 8.0 that says it has the auto wake/sleep function when you close the cover but it dosen't work, do I have a bad case or a bad Note(refurbished)? Where's the sensor, is it magnetic or light activated. Thanks
avux14 said:
I purchased a case for my Note 8.0 that says it has the auto wake/sleep function when you close the cover but it dosen't work, do I have a bad case or a bad Note(refurbished)? Where's the sensor, is it magnetic or light activated. Thanks
Click to expand...
Click to collapse
I believe it is magnetic since some were complaining about it disabling touch temporarily on part of the screen where the case magnet was at (only on certain cases). I have a case with the function on my Note and it works fine. Will have to check it and see where the magnet is placed.
I have a cover for my tablet - can u recommend an app to auto turn on / off screen when I open / close the cover, because HOME button is quickly wearing out! Thanks.
I seem to remember that there were several complaints about their tablets shutting off when closing a third party cover. It turned out that there were magnets in the cover that affected the on/off switch. Maybe you could do a search to find out what cover they used and buy that cover. I may have seen that post somewhere on another forum also. Try a google search also as it may turn up the post you need.
armanys said:
I have a cover for my tablet - can u recommend an app to auto turn on / off screen when I open / close the cover, because HOME button is quickly wearing out! Thanks.
Click to expand...
Click to collapse
The tablet has built in functionality for this.
most folio cases have magnets in them that activate the screen when you open them.
That being said the magnet can temporarily interfere with the Waccom layer of the screen used to get Spen input. (the pen will stop reading accurately/at all in the areas affected by the magnet.)
there were a lot of reports of the magnets permanently affecting the screen but the official word is that if the magnet is removed from close proximity to the screen the issues will eventually go away. (This was a big deal a while back because even Samsungs own folio case has magnets)
note that not everyone reported the issues so I'm pretty sure it has to do with how strong the magnet in the case is.
if you use your pen a lot I would stay away from those cases.
on the other hand if you don't use the pen then it wont affect you.
There are apps to let you double tap the screen to wake it (even for android versions before it was supported) which would save the physical buttons some wear but I suspect you would take a hit on battery life with that option.
The answer to just about everything: Tasker.
There's a how-to for this particular setting here. Battery drain is pretty low, about 2% every 12 hours or so.
Only flip covers with a magnet can use the system's inbuild auto-on/off functionality. Everything else needs to use the proximity sensor.
There are three types of flip covers, two of which use a magnet.
One is a strong, single magnet. This is the cheap option and causes problems with the Wacom sensors, which are also magnetic. You'll find this in pretty much 90% of all auto-on/off covers, especially the cheaper ones. The first Samsung covers also used this method, until they figured out it was a terrible idea.
The second is a ring patterns of thin magnetic strip woven through the entire back of the cover. This is used by most expensive brands (Like Samsonite), and doesn't interfere with the Wacom sensor.
The third are the most common one: Covers without a magnet. All these do is protect your screen.
ShadowLea said:
The answer to just about everything: Tasker.
There's a how-to for this particular setting here. Battery drain is pretty low, about 2% every 12 hours or so.
Only flip covers with a magnet can use the system's inbuild auto-on/off functionality. Everything else needs to use the proximity sensor.
There are three types of flip covers, two of which use a magnet.
One is a strong, single magnet. This is the cheap option and causes problems with the Wacom sensors, which are also magnetic. You'll find this in pretty much 90% of all auto-on/off covers, especially the cheaper ones. The first Samsung covers also used this method, until they figured out it was a terrible idea.
The second is a ring patterns of thin magnetic strip woven through the entire back of the cover. This is used by most expensive brands (Like Samsonite), and doesn't interfere with the Wacom sensor.
The third are the most common one: Covers without a magnet. All these do is protect your screen.
Click to expand...
Click to collapse
Can I use Macrodroid? And how?
Hello, is there any way to trigger the screen to turn off (go to AOD etc) when something is closed on its face? I know in the past magnets and other things were used, and even for the SView covers. Is this possible for a DIY?
In the past, doing what you want was fairly easy, there are some apps that do it, I used gravity screen app, even with macrodroid or automate it, but, since the proximity sensors are behind the screen, the whole functionality changed, now, only the phone calling apps can access the proximity sensor, I now rely on the gyro sensor to turn the screen off, it is not the same, but a somewhat useful workaround solution
A small magnet in left-bottom corner does the trick, but only when my original clear-view cover is installed. Without the installed cover (which the phone recognises as installed accessory, I assume through NFC label in cover) the screen will stay on when a magnet is used in the right spot.
I think DIY solution with magnet is difficult, how to trick phone to think accessory is installed and activate magnetic sensor.
The magnetic sensor in phone is located approx 2.0 cm from left screen edge, approx 1.5 cm from bottom.