Develop Bugs

[ROM] Stock Official 9.0 Flash and Repair Guide [UP] Jul 2019

[ROM] Stock Rom 9.0 Flash and Repair [Full] @XDAfriends hello my friends
New Update Stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 8.1 e 9.0
Build date Mon, Jul 2019 12:24:39 +0700
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730x
[Flash]
To Flash or Repair your original system
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and Add the firmware file to AP / PDA
9. Select too CP partition in the firmware folder
10. Select too CSC partition in the firmware folder
11. Select too Userdata partition in the firmware folder
12. Click the start button, sit back and wait few minutes
13. This method reinstall your rom to original state
[Recomendation]
Install Your stock 9.x or Install 9.x Custom Stock
Install TWRP
Install Root Magisk
Install Kernel Helios 3.x
[Information]
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition, under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
Download Odin v3.13.1
https://www.filesbeast.net/download/1/Odin 3.13.1.zip
Servers
https://www.stockrom.net/samsung
Press F3 and search your model
https://www.sammobile.com/firmwares/
J730G
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/
J730F
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730F/
J730GM
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730GM/
J730FM
.https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730FM/
Search your model on page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​

What file of the 5 that come must be put in the box USERDATA?
Thank you

ismago said:
What file of the 5 that come must be put in the box USERDATA?
Thank you
Click to expand...
Click to collapse
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.

NathyAndrade said:
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
Click to expand...
Click to collapse
Ok. Thank you

I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE​
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much

Hello,
Odin's link is bad.
Should be:
https://dl.sammobile.com/Odin3-v3.13.1.zip

not very clear: you don't say anything about the BL file or the options for Odin

ismago said:
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE​
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Click to expand...
Click to collapse
I using root normaly steps
1. Access onfiguration and developer options
2. Select - unlock by oem
3. Reboot in stock recovery
4. Wipe and factory reset
5. Reboot in download mode
6. Flash twrp and reboot in twrp directly
7. Flash supersu 2.82 and root is perfectly
My iPhone is j730g and root is ok

Forget about supersu and install magisk instead. Follow the steps here: https://forum.xda-developers.com/ga...-3-1-1-1-j7-pro-sm-j730f-g-gm-t3662621/page14

arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
Read first post about BT CP CSC and AP details

New OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 7.0
Changelist 13203669
Build date Mon, 12 Mar 2018 13:25:39 +0000
Security Patch Level 2018-03-01
Product code All variants
PDA J730GUBU3ARC2
CSC J730GZTO3ARC2
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx

new OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/ZTO/download/J730GUBU3ARC2/214163/
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx

arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/

hacker812c said:
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
Click to expand...
Click to collapse
What are you talking about? All these roms are Android 7.0.

Greight said:
What are you talking about? All these roms are Android 7.0.
Click to expand...
Click to collapse
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback

does this way allow me keeping updating OTA ?

eraganxs said:
does this way allow me keeping updating OTA ?
Click to expand...
Click to collapse
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung

hacker812c said:
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
Click to expand...
Click to collapse
No, there wasn't bro. I'm more or less obsessed with updates and check there regularly. Up till now, all the roms have been 7.0.

hacker812c said:
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
Click to expand...
Click to collapse
Thanks bro

FAQ. about Android 7.0 encryption
Many users still do not understand why they try to root in
Android 7.0 and go through problems like bootloop
One of the causes of this problem is the encryption of Nougat android 7.x
Recomendations for Root or TWRP
Boot your device to RECOVERY [Stock] mode then select
FACTORY RESET. THIS WILL WIPE YOUR DEVICE AND YOU WILL LOSE ALL DATA.
(This procedure is required to remove encryption or your device won't boot)
From RECOVERY, IMMEDIATELY Boot your device to DOWNLOAD mode then
connect your USB cable. (DO NOT LET YOUR DEVICE REBOOT NORMALLY
OR YOUR DEVICE WILL RE-ENCRYPT
After this point flash Recovery TWRP and open TWRP immediately
and flash Supersu 2.82.zip [Recomended]
At this point your root is perfectly
-------------------------//--------------------------
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition; under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier

[ROOT] J730x 8.x and 9.x and Upgrade Bootloader and Modem

[ROOT] J730x 8.x and 9.x and Upgrade Bootloader and Modem
Upgrade bootloader and Modem and Root
Root all variants Galaxy J730x 8.x and 9.x
Mega Thread for all users
ROOT TWRP BT and CP
this post is for all users who want to upgrade their rom android
nougat to Oreo or Oreo to Pie and avoid the samsung locks.
My recommendation is to avoid official roms because of
manufacturer blockades, this is a great people activity.
To avoid the protections of samsung you can simply update
your bootloader and your modem then install TWRP and
update your ROM to Oreo or to Pie.
If you already have TWRP and Root just flash the new bootloader
Pie and CP Modem and you you can use custom roms
Remember i recomend only custom roms Android 10 Q in this moment
[ROOT Normaly]
1. Download Stock ROM 9.x or upgrade normaly
2. Start your ROM enter configuration, developer options and set Unlock by OEM
3. Download Odin 3.14 and drivers
4. Download Magisk and TWRP 3.3.0 and no-verity-opt-encrypt-6.1.zip
5. Install drivers for J7
6. Copy Magisk and no-verity-opt-encrypt-6.1.zip to SD Card
7. Enter in Stock Recovery and Factory reset
[Download MODE]
8. After this enter in download mode imediatly or your system encrypt
9. no start your stock rom or your system encrypt
10. Open Odin 3.14 flash Stock Bootloader and Modem Only If necessary
11. Flash TWRP with Odin or upgrade via img
12. Reboot imediatly in Recovery
13. Flash Magisk 20
14. Flash no-verity-opt-encrypt-6.1.zip
15. iNTALL your prefered Custom ROM
16. Install Magisk Manager 7.5
17. Press Thanks please
18. in this moment install Havoc or Lineage 17.1
[Bootloader Upgrade]
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and select BT to upgrade bootloader
9. Select too CP partition to upgrade your Modem / Wifi
10. After this upgrade install any Custom ROM if you have TWRP and ROOT
11. This upgrade keep your TWRP only install new ROM and Magisk
12. i always use no-verity-opt-encrypt-6.1.zip flash with twrp if your system is STOCK
13. If you see RMM state use Miracle 2.58 to unlock your systemhacker
[TWRP 3.3.0 ananjaser1211]
https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases
[Magisk 20.4] Primary option
https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
[Manager 7.5.2]
https://www.apkmirror.com/apk/topjohnwu/magisk-manager/magisk-manager-7-5-2-1e2de1bb-release/
[no-verity-opt-encrypt-6.1.zip]
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
[Official]
Magisk Official Post
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
[RMM State Fix] Miracle box
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Havoc OS 3.2 Stable for J730x
https://forum.xda-developers.com/ga...om-crdroid-6-3-android-q-10-0-galaxy-t4048917
Root J730x J730G J730F J730FM J730GM J730K
The Secret Of My Seccess is Jesus ♡​

Reserved to screens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Root Magisk

Hi all.
I have a verry serius problem. I installed twrp recovery, but adb don't work. I'm totaly blind user, and using twrp recovery exclusivly by adb commands. Please any recovery with adb enabled automaticly when recovery is starting. Happy new year. Thanks and best regards

iksi said:
Hi all.
I have a verry serius problem. I installed twrp recovery, but adb don't work. I'm totaly blind user, and using twrp recovery exclusivly by adb commands. Please any recovery with adb enabled automaticly when recovery is starting. Happy new year. Thanks and best regards
Click to expand...
Click to collapse
three important considerations - 1. do a factory reset After installing the official ROM. 2. Instantly install and insert twrp recovery. 3. Install the magisk 18.
factory reset needed to delete encryption since Android 7 You will still need the magisk for Rute correct from the new actions Android 8.1 x I do not recommend the supersu After Oreo 8.1

I know that, but i can't doo nothing with out sited assistance. The problem are that adb disabled in recovery, and i can't doo factorry reset, and flash magisk. thanks again.

iksi said:
I know that, but i can't doo nothing with out sited assistance. The problem are that adb disabled in recovery, and i can't doo factorry reset, and flash magisk. thanks again.
Click to expand...
Click to collapse
Your problem is RMM State check This
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Press thanks

hacker812c said:
Reserved to images
Click to expand...
Click to collapse
Magisk Manager 6.1.0
https://github.com/topjohnwu/Magisk/releases/download/manager-v6.1.0/MagiskManager-v6.1.0.apk
Magisk Stable 18.0
https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
Important Changelogs
v18.
- [General] Remove native systemless hosts (Magisk Manager is updated with a built-in systemless hosts module)
v17.0/17.1
- [Script] Add hexpatch to remove Samsung defex in new Oreo kernels

hacker812c said:
Your problem is RMM State check This
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Press thanks
Click to expand...
Click to collapse
After Magisk 17.x the script fix Security Patch 01 Sep 2018 [Test Ok]

hacker812c said:
After Magisk 17.x the script fix Security Patch 01 Sep 2018 [Test Ok]
Click to expand...
Click to collapse
Download Magisk 18.1
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
Magisk Manager 7.0.0
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
v18.1
- [General] Support EMUI 9.0
- [General] Support Kirin 960 devices
- [General] Support down to Android 4.2
- [General] Major code base modernization under-the-hood

I add information to upgrade your bootloader and modem to install Oreo and Pie roms and bypass samsung RMM state
This method is secure and your system is upgrade to Oreo

Updating
How to install :
iNSTALL twrp and Root
https://forum.xda-developers.com/ga...730f-fm-g-gm-x-samsung-galaxy-j7-pro-t3835629

TWRP 3.3.0.0 link download
https://forum.xda-developers.com/ga...730f-fm-g-gm-x-samsung-galaxy-j7-pro-t3835629
Upgrade your system to Android 10 Q
iF YOU have Android 8 upgrade to 9 first
iF YOU decide upgrade only BL and CP bootloader and modem
iF YOU upgrade BL and CP install Android 10 Q
iNSTALL Havoc OS or Lineage OS 17.1

Remember my friends do not install Official stock roms from others country in your phone this action block rmm install stock or bootloader of your country

Paranoid Android Pie Beta - Xiaomi Mi A2 Lite

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We’re really excited to announce the release of Paranoid Android Pie betas.
On first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. For those who are unfamiliar, Hampus is a multi-disciplinary artist whose design stands itself and we’re glad to have him onboard. We also added further UI touches that we believe enhances the overall user experience.
The beta builds include adjustments and improvements on top of the stock Android CAF base. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features.
Device-specific issues
- DT2W
- Camera crashes if it detects a face
Note: Custom kernels are NOT supported!
Download
Get the latest Xiaomi Mi A2 Lite build here!
Changelogs
Paranoid Android Pie beta released
Requirements
* Required * firmware version must be based on P-based builds.
Formatting/Wiping data (all user data is wiped, including internal storage (in case of a format)) is a must if you were using a different rom previously.
Instructions
Boot recovery from fastboot (TWRP recovery for Mi A2 Lite)
Format/Wipe /system and /data
Install AOSPA zip package
Install [optional] TWRP flashable
Don't forget to change slots after installing the rom in TWRP!
You have to reboot TWRP to the "new" slot to install GApps!
Important / Useful links
TWRP (bootable): https://androidfilehost.com/?fid=1395089523397933315
TWRP (flashable): https://androidfilehost.com/?fid=1395089523397933316
Forced encryption disabler: https://androidfilehost.com/?fid=1395089523397907941
Kernel source: https://github.com/33bca/android_kernel_xiaomi_msm8953
Help us improve PA by submitting good bug reports possibly with a log attached. Learn how to take logs here.
Our device maintainer for Xiaomi Mi A2 Lite is @33bca. Mention (@) me if you need some assistance and/or when reporting bugs.
Cheers and #StayParanoid!

# Reserved

# Reserved 2

a many thanks @33bca for your hard work you put into developing for our a2 lite
what bothers me most before trying your pa rom is the question if i can revert back to stock (inlcuding a/B Partitons and Stock Recovery, Encryption ) without any problem ? and if so what steps do i have to do to revert back to stock ?
normaly i would just make a backup from within twrp of my stock Phone and then do a restore if needed but as i unterstand it right thats not possible at the moment with the extisting versions of twrp for our a2 lite ? so maybe just get a2 lite into fastboot mode and flash an original fastboot image ?

Nice thanks ?

and some more questions @33bca on your instructions to install the rom:
Requirements
* Required * firmware version must be based on P-based builds.
so one must have 10.0.3.0 or 10.0.4.0 version of stock firmware on the a2 lite?
Formatting data (all user data is wiped, including internal storage) is a must if the storage was encrypted previously.
how do i find out if phone is encrypted or not ? if i goto settings and then security & location - advanced and if there under encryption and credentials at encrypt phone it says encrypted - then i have to format data (from whithin stock rom or from within twrp ?
Instructions:
Boot recovery from fastboot (TWRP recovery for Mi A2 Lite)
so here i use your bootable twrp img file (from your first link) with the command "fastboot boot recovery twrp-daisy-3.2.3-0-offain.img" ?
Format /system and /data
ist this the step you mention in the requirements or to i have to do this additionally to the step in the requirements ?
Install AOSPA zip package
just flash your pa rom within twrp ?
Install [optional] TWRP flashable
so here i flash the twrp (flashable from your second link) within twrp ?
and finally when should the "Forced encryption disabler" be flashed right after first time booting into twrp or after formating system and data ?

Yeah I need more detailed instructions to get this work ?

apelamod said:
Yeah I need more detailed instructions to get this work ?
Click to expand...
Click to collapse
Go to custom driod a2 lite twrp easyist way I've seen.besides that littwrl just flash ROM n switch slots o yea plus gapps.then u will have to reinstall twrp

ilovebytes said:
what bothers me most before trying your pa rom is the question if i can revert back to stock (inlcuding a/B Partitons and Stock Recovery, Encryption ) without any problem ? and if so what steps do i have to do to revert back to stock ?
normaly i would just make a backup from within twrp of my stock Phone and then do a restore if needed but as i unterstand it right thats not possible at the moment with the extisting versions of twrp for our a2 lite ? so maybe just get a2 lite into fastboot mode and flash an original fastboot image ?
Click to expand...
Click to collapse
rob420p said:
I would imagine u would need to use mi flash.or switch back to the other slot
Click to expand...
Click to collapse
hope you don't mind i put your quote from the other Thread into this one as i think its more usefull here now
thats what i need to know before i am gonnna give it a try - can i revert back to a completely Stock A2 lite from PA Rom with just putting the A2 lite into Fastboot Mode an flash a pie fastboot image (10.0.3.0 ore 10.0.4.0) with Miflash ?

- Camera crashes if it detects a face
Can face detecting be turned off?

@33bca after install opencamera app I have not bug Camera crashes if it detects a face

can someone who successfully install this rom make a noob-friendly guide how to install it? like how to change slot and is it mandatory to install forced encryption disabler?

adhitore said:
can someone who successfully install this rom make a noob-friendly guide how to install it? like how to change slot and is it mandatory to install forced encryption disabler?
Click to expand...
Click to collapse
Yes I like to get clean tutorial also ?

guide install
- use pie base firmware
boot to twrp :
-need to wipe /data , /system
- install zip pa
- install zip disable encryption
- optional install twrp installer
- change to slot b and boot to system after
- booted pa is fine ! install opencamera app for resolve error cam
- optional 2 : return to twrp after first boot for install : magisks , opengapps ...
adhitore said:
can someone who successfully install this rom make a noob-friendly guide how to install it? like how to change slot and is it mandatory to install forced encryption disabler?
Click to expand...
Click to collapse

ada12 said:
- use pie base firmware
-need to wipe /data , /system in twrp
- install zip pa
- install zip disable encryption
- optional install twrp installer
- change to slot b
- booted pa is fine ! install opencamera app for resolve error cam
- optional 2 : return to twrp after first boot for install : magisks , opengapps ...
Click to expand...
Click to collapse
install Gapps after change to slot b?. there is a menu in twrp to change slot or what?

Thanks dev! What about Bluetooth Slow Wifi Bug? Flickering? Are these annoying stock rom bugs fixed?

Thank you very much!

Reboot menu twrp for option slot change...
For gapps read my guide
adhitore said:
install Gapps after change to slot b?. there is a menu in twrp to change slot or what?
Click to expand...
Click to collapse

edit: USB preference cannot be selected , camera broken if you enable camera2 API

Should I unlock the bootloader first? It didn't mentioned in first post

[ROM][13.0][OFFICIAL] PixelOS [AOSP][ENCRYPTION][STABLE][22/02/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Improvements
​Device Specific Issues:
VoWiFi/VoLTE
Requirements:
S Firmware
Downloads
Get the latest PixelOS Build for (beyond0lte) (beyond1lte) (beyond2lte) (beyondx)
PixelOS Recovery (beyond0lte) (beyond1lte) (beyond2lte) (beyondx)
Magisk (optional) (Download from here)
Note: GApps are included, don't flash separately.
Notes
• SELinux is enforcing
• EROFS for /vendor
• PixelOS Recovery is highly recommended
• You CAN'T INSTALL this ROM using TWRP or similar, this rom supports only AOSP-Based Recoverys (Like LineageOS Recovery and PixelOS Recovery) - Please don't report bugs if you using TWRP.
• Please report bugs with logs if you found any
Flashing Instructions
Clean flash (coming from a different ROM):
• Make sure your device's bootloader is unlocked
• Power off the device and boot to download mode (Vol Down + Bixby Key + USB Cable)
• Download Samsung Odin and open it (If the device is not recognized, make sure Samsung USB Drivers are properly installed)
• Put the PixelOS_beyond*-13.0-YYYYMMDD-HHMM-recovery.img.tar file in Odin's AP slot and flash it
• At the exact moment the screen goes off, don't remove the USB Cable and boot to recovery mode (Vol Up + Bixby Key + Power)
• Download ROM from the link above
• Format data, cache and system
• Flash ROM using adb sideload or sdcard
• Flash Magisk (Optional)
• Format data and reboot
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Format cache (optional, recommended)
• Reboot and voila!
Credits:
• @Linux4 - For making the trees and officialy maintaing them in LineageOS, for giving me access to A13 device tree. and for helping me!
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://ko-fi.com/jubscleisson
Source Code
PixelOS http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/Jubscleisson/android_kernel_samsung_exynos9820
ROM OS Version: Android 13.0
ROM Kernel: Linux 4.14.305
Latest Release Date: 22/02/2023

On HVG4 or HVJ1?

Can I this install on HVJ1?

I installed the firmware first Download firmware G975FXXUGHVJ1 that you cant dl any more. it didnt work now i cant revert to stock as my firmware is to high and i get kernel rev check fail device 16 binary 14 with odin? how can i revert to stock rom then try again?

majordj said:
I installed the firmware first Download firmware G975FXXUGHVJ1 that you cant dl any more. it didnt work now i cant revert to stock as my firmware is to high and i get kernel rev check fail device 16 binary 14 with odin? how can i revert to stock rom then try again?
Click to expand...
Click to collapse
I don't know. I installed HVJ1 and it work for me. I can't back to HVG4.

ZmisiS said:
I don't know. I installed HVJ1 and it work for me. I can't back to HVG4.
Click to expand...
Click to collapse
thanks for the help??? do you know anyone that knows how to fix it

mine just hangs on the samsung screen and nothing. id like to go back to android 12 but cant due to the firmware ive installed trying this.

majordj said:
mine just hangs on the samsung screen and nothing. id like to go back to android 12 but cant due to the firmware ive installed trying this.
Click to expand...
Click to collapse
I installed HVJ1 with ODIN. Open download mode and in ODIN add AP, BL, CP and CSC file and Start. That should work and the system should rise.
My phone je Samsung Galaxy S10 (SM-G973F). The same applies to the S10+.
Try this way. It worked for me. Connect the phone to the PC. Press the Down Vol buttons together. + Bixby + Power. When the phone vibrates, release the Power button and wait for Download mode to open.
Another way is to connect your phone and computer with a USB cable and press the Power + Val Down buttons together and hold them until the screen turns black and vibrates. After that, while the screen is black, release the keys and press the Power + Val Up + Bixby keys together. Keep it until the recovery opens. When Recovery opens, turn off your phone in Recovery. In Lineage OS Recover go to Advanced and there you can turn off the phone. After entering recovery, you can disconnect the USB cable. After that, connect your phone and computer with a USB cable and open the download mode.

ZmisiS said:
I installed HVJ1 with ODIN. Open download mode and in ODIN add AP, BL, CP and CSC file and Start. That should work and the system should rise.
My phone je Samsung Galaxy S10 (SM-G973F). The same applies to the S10+.
Try this way. It worked for me. Connect the phone to the PC. Press the Down Vol buttons together. + Bixby + Power. When the phone vibrates, release the Power button and wait for Download mode to open.
Click to expand...
Click to collapse
The file is not there any more on the site for s10+?

majordj said:
The file is not there any more on the site for s10+?
Click to expand...
Click to collapse
I did not understand. Don't you have HVJ1? You can download HVJ1 from Frija. Do you have OXM multi CSC? If yes, you can download this firmware with Frija.

majordj said:
The file is not there any more on the site for s10+?
Click to expand...
Click to collapse
I installed the firmware and for that you only need BL and you put the firmware in there now i have installed the firmware im to high to go back? there is not files in the firmware to add the AP etc etc? is there a custom firmware that i can use to revert back to any android before 13 firmware

the latest firmware from the link was G975NKSU7HVG5 this moved mine up

majordj said:
I installed the firmware and for that you only need BL and you put the firmware in there now i have installed the firmware im to high to go back? there is not files in the firmware to add the AP etc etc? is there a custom firmware that i can use to revert back to any android before 13 firmware
Click to expand...
Click to collapse
I can't on Android 13 either because I installed the latest HVJ1 firmware.
You wrote: "mine just hangs on the samsung screen and nothing."
If you can use the latest HVJ1 firmware, wait for the developers to adapt the new custom ROMs to the new firmware.

ZmisiS said:
I can't on Android 13 either because I installed the latest HVJ1 firmware.
You wrote: "mine just hangs on the samsung screen and nothing."
If you can use the latest HVJ1 firmware, wait for the developers to adapt the new custom ROMs to the new firmware.
Click to expand...
Click to collapse
so basically i cant do anything till new roms come out on that firmware cause i installed the latest 13 firmware?

majordj said:
the latest firmware from the link was G975NKSU7HVG5 this moved mine up
Click to expand...
Click to collapse
Download firmware from Frija za Stock ROM. I tried on Frija download HVJ1 for S10+ and it works. You have a picture in one of my comments above.

nope it now stuck on device is 16 binary is 15.... please help me change this in ODIN

majordj said:
nope it now stuck on device is 16 binary is 15.... please help me change this in ODIN
Click to expand...
Click to collapse
You need go out from Download mode and go out ODIN. Now again open Download mode and ODIN. In ODIN use AP, BL, SP and CSC files and Start.

majordj said:
nope it now stuck on device is 16 binary is 15.... please help me change this in ODIN
Click to expand...
Click to collapse
Download firmware updates for your Samsung mobile phone and tablet
Firmware for Samsung Galaxy mobile phone & tablet ✔ Find any update, ever released by Samsung. ✔ Free downloads & high-speed options available. ✔ For all versions and all devices. ✔ Including instructions
www.sammobile.com

Ryu--X said:
Download firmware updates for your Samsung mobile phone and tablet
Firmware for Samsung Galaxy mobile phone & tablet ✔ Find any update, ever released by Samsung. ✔ Free downloads & high-speed options available. ✔ For all versions and all devices. ✔ Including instructions
www.sammobile.com
Click to expand...
Click to collapse
With Frija he can download HVJ1 for phone. It is faster.

Maybe the file is corrupted...anyway it's another option and i trust in their firmwares.

[ROM][OFFICIAL][13.0_r41] RisingOS v1.0 [Atlantis][29/04/2023]

risingOS v1.0 for OnePlus Nord [avicii]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is risingOS?
risingOS is An OpenSource Aftermarket Android Operating System that aims to deliver unique and refreshing android experience.
What's working?
Most functionality runs without issue(s).
Variants available
GAPPS : With Google Services
AOSP : Without Google Services
Bugs and Issues
Please tell me with a logcat attached
First Time Install / Clean Flash
1. Download the flashable ZIP for avicii
2. Reboot to Recovery
3. Flash the rom using ADB sideload or flash the ZIP file from internal storage using Recovery
4. Clear Data & Dalvik/ART Cache (If using Custom Recovery and the previously installed rom is FBEv2)
Format Data (If using AOSP recovery or previously installed rom is FBEv1)
5. Reboot to System
Update / Dirty Flash
1. Reboot to Recovery
2. Download the flashable ZIP for avicii (ADB sideload or flash from internal storage using Recovery)
3. Reboot to System
Download
(Rising OS - Lineage OS - AOSP recovery is provided. You can either use the provided recovery or a custom recovery to flash this rom)
Device Support Group
Donate to support build
UPI : [email protected]
Paypal​• Android Version: 13.0_r41
• Build Author: Sreeshankar K
• Source Code: https://github.com/RisingTechOSS
• Device Tree:
https://github.com/Sanju0910/risingos_device_oneplus_avicii
• Kernel Source Code: https://github.com/Sanju0910/android_kernel_oneplus_avicii

Reserved

Reserved

Reserved

Changelog [29/04/2023]:
• Sync with latest source
• Upstream Kernel to 4.19.282
• Updated QSSI Blobs from LA.QSSI.13.0.r1-09700-qssi.0 (Use perf configs from OOS)
• Kernel tweaks to optimise AOD (Credits: jabashque)
• Introduce Kernel level rooting : KernelSU : Get root access without breaking CTS profile match and safetynet (Credits: tiann)
• Include UDFPS Customisation

From what oos version should i flash?

acopier said:
From what oos version should i flash?
Click to expand...
Click to collapse
Currently on which rom?

Also how much sot?

Sreeshankar K said:
Currently on which rom?
Click to expand...
Click to collapse
Oos 10

I am using this room for more than 7 days. Here are my review.
Good things..
1. This rom is so smooth, i didn't feel any leg. I tried many roms including pixel experience plus but it have legs in notification panel. But this rom have no leg in whole ui.
2. So much customisation. Your phone, your way. (Without root, with root you can do more)
3. Take screenshot in restricted apps without root. (Just disable windows secure flag)
4. Option to create 5Ghz hotspot. (Pixel experience plus doesn't have this feature).
5. And much more..
Bad things...
Everything in this rom is good.
Give a try to experience your new OnePlus Nord.
A very big thanks to developer.

princen41 said:
I am using this room for more than 7 days. Here are my review.
Good things..
1. This rom is so smooth, i didn't feel any leg. I tried many roms including pixel experience plus but it have legs in notification panel. But this rom have no leg in whole ui.
2. So much customisation. Your phone, your way. (Without root, with root you can do more)
3. Take screenshot in restricted apps without root. (Just disable windows secure flag)
4. Option to create 5Ghz hotspot. (Pixel experience plus doesn't have this feature).
5. And much more..
Bad things...
Everything in this rom is good.
Give a try to experience your new OnePlus Nord.
A very big thanks to developer.
Click to expand...
Click to collapse
Hi
what recovery did you do with?
I am under OS12 stock boot loader unlock
Is the battery good?
Does it have 5G
thanks

jédocam said:
Hi
what recovery did you do with?
I am under OS12 stock boot loader unlock
Is the battery good?
Does it have 5G
thanks
Click to expand...
Click to collapse
I used orangefox recovery for oos 12. It supports 5G. Battery is good.
Don't flash recovery, just boot recovery via
Fastboot boot recovery.img (on oos 12)
After installing custom rom you can flash custom recovery.

princen41 said:
I used orangefox recovery for oos 12. It supports 5G. Battery is good.
Don't flash recovery, just boot recovery via
Fastboot boot recovery.img (on oos 12)
After installing custom rom you can flash custom recovery.
Click to expand...
Click to collapse
THANKS
I still have two questions:
I don't really know this recovery
I took the one ORANGEFOX RECOVERY PROJECT - R11.1_4
Can you tell me the steps in this recovery:
data format etc....
do i have to flash it after installing the rom?

jédocam said:
THANKS
I still have two questions:
I don't really know this recovery
I took the one ORANGEFOX RECOVERY PROJECT - R11.1_4
Can you tell me the steps in this recovery:
data format etc....
do i have to flash it after installing the rom?
Click to expand...
Click to collapse
1. Boot into recovery. (Don't flash)
2. Flash rom.
3. Formate data and internal storage.
4. Now you can flash custom recovery.
5. Reboot and enjoy.

princen41 said:
1. Boot into recovery. (Don't flash)
2. Flash rom.
3. Formate data and internal storage.
4. Now you can flash custom recovery.
5. Reboot and enjoy.
Click to expand...
Click to collapse
Thanks

jédocam said:
Thanks
Click to expand...
Click to collapse
I just booted into orangefox recovery
it asks me for a code: decrypt partition .... I think ....
what code should I enter my pin code? or i can skip this step
THANKS

jédocam said:
I just booted into orangefox recovery
it asks me for a code: decrypt partition .... I think ....
what code should I enter my pin code? or i can skip this step
THANKS
Click to expand...
Click to collapse
You can enter your screen lock code, if you are on oos 12. If you decrypt partition, you can install rom from your internal storage. If you skip this step, you can install rom from adb sideload.
In both case you can install rom.

princen41 said:
1. Boot into recovery. (Don't flash)
2. Flash rom.
3. Formate data and internal storage.
4. Now you can flash custom recovery.
5. Reboot and enjoy.
Click to expand...
Click to collapse
Hi
I think I have time to do it tonight
via the method
decrypt partition
Via OTG Support
4 - Can I at the end flash the recovery in zip from my USB key support?
thanks again

jédocam said:
Hi
I think I have time to do it tonight
via the method
decrypt partition
Via OTG Support
4 - Can I at the end flash the recovery in zip from my USB key support?
thanks again
Click to expand...
Click to collapse
You can flash it via USB. Or you can use PC or another android device to flash zip.

Hi
I just did all the steps
and when i reboot system
it reboots to recovery without stopping
what should i do please