[ROOT] J730x 8.x and 9.x and Upgrade Bootloader and Modem
Upgrade bootloader and Modem and Root
Root all variants Galaxy J730x 8.x and 9.x
Mega Thread for all users
ROOT TWRP BT and CP
this post is for all users who want to upgrade their rom android
nougat to Oreo or Oreo to Pie and avoid the samsung locks.
My recommendation is to avoid official roms because of
manufacturer blockades, this is a great people activity.
To avoid the protections of samsung you can simply update
your bootloader and your modem then install TWRP and
update your ROM to Oreo or to Pie.
If you already have TWRP and Root just flash the new bootloader
Pie and CP Modem and you you can use custom roms
Remember i recomend only custom roms Android 10 Q in this moment
[ROOT Normaly]
1. Download Stock ROM 9.x or upgrade normaly
2. Start your ROM enter configuration, developer options and set Unlock by OEM
3. Download Odin 3.14 and drivers
4. Download Magisk and TWRP 3.3.0 and no-verity-opt-encrypt-6.1.zip
5. Install drivers for J7
6. Copy Magisk and no-verity-opt-encrypt-6.1.zip to SD Card
7. Enter in Stock Recovery and Factory reset
[Download MODE]
8. After this enter in download mode imediatly or your system encrypt
9. no start your stock rom or your system encrypt
10. Open Odin 3.14 flash Stock Bootloader and Modem Only If necessary
11. Flash TWRP with Odin or upgrade via img
12. Reboot imediatly in Recovery
13. Flash Magisk 20
14. Flash no-verity-opt-encrypt-6.1.zip
15. iNTALL your prefered Custom ROM
16. Install Magisk Manager 7.5
17. Press Thanks please
18. in this moment install Havoc or Lineage 17.1
[Bootloader Upgrade]
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and select BT to upgrade bootloader
9. Select too CP partition to upgrade your Modem / Wifi
10. After this upgrade install any Custom ROM if you have TWRP and ROOT
11. This upgrade keep your TWRP only install new ROM and Magisk
12. i always use no-verity-opt-encrypt-6.1.zip flash with twrp if your system is STOCK
13. If you see RMM state use Miracle 2.58 to unlock your systemhacker
[TWRP 3.3.0 ananjaser1211]
https://github.com/ananjaser1211/android_device_samsung_jxy17lte/releases
[Magisk 20.4] Primary option
https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
[Manager 7.5.2]
https://www.apkmirror.com/apk/topjohnwu/magisk-manager/magisk-manager-7-5-2-1e2de1bb-release/
[no-verity-opt-encrypt-6.1.zip]
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
[Official]
Magisk Official Post
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
[RMM State Fix] Miracle box
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Havoc OS 3.2 Stable for J730x
https://forum.xda-developers.com/ga...om-crdroid-6-3-android-q-10-0-galaxy-t4048917
Root J730x J730G J730F J730FM J730GM J730K
The Secret Of My Seccess is Jesus ♡
Reserved to screens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Root Magisk
Hi all.
I have a verry serius problem. I installed twrp recovery, but adb don't work. I'm totaly blind user, and using twrp recovery exclusivly by adb commands. Please any recovery with adb enabled automaticly when recovery is starting. Happy new year. Thanks and best regards
iksi said:
Hi all.
I have a verry serius problem. I installed twrp recovery, but adb don't work. I'm totaly blind user, and using twrp recovery exclusivly by adb commands. Please any recovery with adb enabled automaticly when recovery is starting. Happy new year. Thanks and best regards
Click to expand...
Click to collapse
three important considerations - 1. do a factory reset After installing the official ROM. 2. Instantly install and insert twrp recovery. 3. Install the magisk 18.
factory reset needed to delete encryption since Android 7 You will still need the magisk for Rute correct from the new actions Android 8.1 x I do not recommend the supersu After Oreo 8.1
I know that, but i can't doo nothing with out sited assistance. The problem are that adb disabled in recovery, and i can't doo factorry reset, and flash magisk. thanks again.
iksi said:
I know that, but i can't doo nothing with out sited assistance. The problem are that adb disabled in recovery, and i can't doo factorry reset, and flash magisk. thanks again.
Click to expand...
Click to collapse
Your problem is RMM State check This
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Press thanks
hacker812c said:
Reserved to images
Click to expand...
Click to collapse
Magisk Manager 6.1.0
https://github.com/topjohnwu/Magisk/releases/download/manager-v6.1.0/MagiskManager-v6.1.0.apk
Magisk Stable 18.0
https://github.com/topjohnwu/Magisk/releases/download/v18.0/Magisk-v18.0.zip
Important Changelogs
v18.
- [General] Remove native systemless hosts (Magisk Manager is updated with a built-in systemless hosts module)
v17.0/17.1
- [Script] Add hexpatch to remove Samsung defex in new Oreo kernels
hacker812c said:
Your problem is RMM State check This
https://forum.xda-developers.com/ga...-rmm-fix-oreo-8-1-oem-unlock-fix-dez-t3877764
Press thanks
Click to expand...
Click to collapse
After Magisk 17.x the script fix Security Patch 01 Sep 2018 [Test Ok]
hacker812c said:
After Magisk 17.x the script fix Security Patch 01 Sep 2018 [Test Ok]
Click to expand...
Click to collapse
Download Magisk 18.1
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
Magisk Manager 7.0.0
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
v18.1
- [General] Support EMUI 9.0
- [General] Support Kirin 960 devices
- [General] Support down to Android 4.2
- [General] Major code base modernization under-the-hood
I add information to upgrade your bootloader and modem to install Oreo and Pie roms and bypass samsung RMM state
This method is secure and your system is upgrade to Oreo
Updating
How to install :
iNSTALL twrp and Root
https://forum.xda-developers.com/ga...730f-fm-g-gm-x-samsung-galaxy-j7-pro-t3835629
TWRP 3.3.0.0 link download
https://forum.xda-developers.com/ga...730f-fm-g-gm-x-samsung-galaxy-j7-pro-t3835629
Upgrade your system to Android 10 Q
iF YOU have Android 8 upgrade to 9 first
iF YOU decide upgrade only BL and CP bootloader and modem
iF YOU upgrade BL and CP install Android 10 Q
iNSTALL Havoc OS or Lineage OS 17.1
Remember my friends do not install Official stock roms from others country in your phone this action block rmm install stock or bootloader of your country
Related
[ROM] Stock Rom 9.0 Flash and Repair [Full] @XDAfriends hello my friends
New Update Stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 8.1 e 9.0
Build date Mon, Jul 2019 12:24:39 +0700
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730x
[Flash]
To Flash or Repair your original system
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and Add the firmware file to AP / PDA
9. Select too CP partition in the firmware folder
10. Select too CSC partition in the firmware folder
11. Select too Userdata partition in the firmware folder
12. Click the start button, sit back and wait few minutes
13. This method reinstall your rom to original state
[Recomendation]
Install Your stock 9.x or Install 9.x Custom Stock
Install TWRP
Install Root Magisk
Install Kernel Helios 3.x
[Information]
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition, under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
Download Odin v3.13.1
https://www.filesbeast.net/download/1/Odin 3.13.1.zip
Servers
https://www.stockrom.net/samsung
Press F3 and search your model
https://www.sammobile.com/firmwares/
J730G
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/
J730F
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730F/
J730GM
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730GM/
J730FM
.https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730FM/
Search your model on page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What file of the 5 that come must be put in the box USERDATA?
Thank you
ismago said:
What file of the 5 that come must be put in the box USERDATA?
Thank you
Click to expand...
Click to collapse
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
NathyAndrade said:
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
Click to expand...
Click to collapse
Ok. Thank you
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Hello,
Odin's link is bad.
Should be:
https://dl.sammobile.com/Odin3-v3.13.1.zip
not very clear: you don't say anything about the BL file or the options for Odin
ismago said:
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Click to expand...
Click to collapse
I using root normaly steps
1. Access onfiguration and developer options
2. Select - unlock by oem
3. Reboot in stock recovery
4. Wipe and factory reset
5. Reboot in download mode
6. Flash twrp and reboot in twrp directly
7. Flash supersu 2.82 and root is perfectly
My iPhone is j730g and root is ok
Forget about supersu and install magisk instead. Follow the steps here: https://forum.xda-developers.com/ga...-3-1-1-1-j7-pro-sm-j730f-g-gm-t3662621/page14
arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
Read first post about BT CP CSC and AP details
New OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 7.0
Changelist 13203669
Build date Mon, 12 Mar 2018 13:25:39 +0000
Security Patch Level 2018-03-01
Product code All variants
PDA J730GUBU3ARC2
CSC J730GZTO3ARC2
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx
new OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/ZTO/download/J730GUBU3ARC2/214163/
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx
arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
hacker812c said:
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
Click to expand...
Click to collapse
What are you talking about? All these roms are Android 7.0.
Greight said:
What are you talking about? All these roms are Android 7.0.
Click to expand...
Click to collapse
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
does this way allow me keeping updating OTA ?
eraganxs said:
does this way allow me keeping updating OTA ?
Click to expand...
Click to collapse
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
hacker812c said:
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
Click to expand...
Click to collapse
No, there wasn't bro. I'm more or less obsessed with updates and check there regularly. Up till now, all the roms have been 7.0.
hacker812c said:
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
Click to expand...
Click to collapse
Thanks bro
FAQ. about Android 7.0 encryption
Many users still do not understand why they try to root in
Android 7.0 and go through problems like bootloop
One of the causes of this problem is the encryption of Nougat android 7.x
Recomendations for Root or TWRP
Boot your device to RECOVERY [Stock] mode then select
FACTORY RESET. THIS WILL WIPE YOUR DEVICE AND YOU WILL LOSE ALL DATA.
(This procedure is required to remove encryption or your device won't boot)
From RECOVERY, IMMEDIATELY Boot your device to DOWNLOAD mode then
connect your USB cable. (DO NOT LET YOUR DEVICE REBOOT NORMALLY
OR YOUR DEVICE WILL RE-ENCRYPT
After this point flash Recovery TWRP and open TWRP immediately
and flash Supersu 2.82.zip [Recomended]
At this point your root is perfectly
-------------------------//--------------------------
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition; under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom V9.7
Based on Android 12 - G97xFXXSGHWC1
Devices Supported: G970F(D), G973F(D), G975F(D)
ROM Features
<*>Aroma choices: full/dirty wipe, debloat, Bixby key remapping, Emoji</*>
<*>Supports G970F(D), G973F(D) and G975F(D)</*>
<*>Base Android 12 G975FXXSGHWC1 odex/deodex Mar 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features (camera sound menu, call recording, camera during call, etc)</*>
<*>Knox partially removed, AppLock,</*>
<*>Included the security bypass from Ian’s multidisabler</*>
<*>build.prop tweaks: call ring delay, BT passwords remember</*>
<*>Allow screenshots in secure apps</*>
<*>Reboot directly in rooted system from power menu (modded services)</*>
<*>Possibility to choose in aroma to remove the boot warning</*>
<*>Modded IncallUI with app (add Phone tile - long press for settings)</*>
<*>Latest patched twrp included in the rom zip</*>
Changelog v9.7
<*>Updated to the latest HWC1 OneUI 4.1 FW Mar 2023</*>
<*>Switched back to magisk canary - remove your actual magisk app and install magisk canary</*>
Credits
- John Wu for Magisk
- IanMacd for multidisabler
- IanMacd and Oleg for the libbluetooth fix
- Corsicanu for the TWRP
- Mr. Waehere for CRB kitchen
- WinB33 for the FontPack
- aliwaris for incallui mod
- adil192 for some shealth mods
- dutchman89 for the awesome beyond boot animation
- All people who helped me with ROM testing (Claude, Bananaman and others)
Download Links for G970F(D)/G973F(D)/G975F(D)
BR9.7 HWC1 Link
Digi Link
ALWAYS CHOOSE REBOOT TO RECOVERY AFTER FLASHING BR ROM OR WHEN REBOOTING FROM TWRP !
Dirty flash BR 9.7 over BR 9.6 is possible. You must be on at list HVJ5 FW to boot BR9.7 !!!
Installation procedure
1. You need to be already on Android 12 fw before attempting to flash BR 9.x
2. Flash latest TWRP (3.7.0_9-1 or newer patched with Magisk Canary or Alpha, not stable Magisk) in Odin (AP slot), reboot the phone in TWRP using combo keys and the USB cable connected to phone and PC
3. Wipe your data in TWRP (type YES when asked), flash Ian’s latest multidisabler (v3.1 or newer) to disable the encryption at the next reboot then flash BR 9.x
In any of the above cases, MAKE SURE THAT YOUR DATA PARTITION IS NOT ENCRYPTED!!!
If your /data partition is encrypted, flash Ian’s latest multidisabler (v3.1 or newer) and format your data in TWRP after flashing the multidisabler (Wipe data, reply YES when asked in TWRP). Beware that your ENTIRE internal SD will be wiped.
After the first boot, when you start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup your root environment. Toggle ON the magisk hide toggle in magisk manager.
You can experiment also flashing full stock HWA3 fw + patched twrp+vbmeta with Odin using HOME_CSC to keep your data then reboot immediately in twrp and dirty flash directly BR9.x. It could work but no guarantee.
Advises
0. DON'T START FLASHING BRx WITHOUT A FULL TWRP BACKUP !!! Backup to PC your important files: documents, pics, contacts, SMS, etc.
1. Is advisable to clean flash if coming from A11. You can try to restore your previous saved data with TWRP but you can experience problems
2. If you have error 1 while flashing the ROM - usually bad ROM zip download; wipe cache + dalvik and try to flash the ROM again
3. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
Telegram chat
PayPal link
Happy flashing good people!
Odin fail
On BR6-Backup Odin, I get a stop at system.img with the notice "only official released binaries are allowed to be flashed " in red on the phone.
Thank you eternally, thank you very much for all the work and effort, I am trying to download ... greetings and blessings for the whole team.
samsung s 10e rom
---------- Post added at 07:04 AM ---------- Previous post was at 07:04 AM ----------
Devices Supported: G970F
Hello.
Can anyone please attach some screenshots? Neither this or the topic from s10 have any screenshots. Thank you.
Sent from my SM-G975F using Tapatalk
flyboy43 said:
On BR6-Backup Odin, I get a stop at system.img with the notice "only official released binaries are allowed to be flashed " in red on the phone.
Click to expand...
Click to collapse
I had this issue some time ago on Pie flashing stock FW. It can happen from various reasons: old Odin version, USB cable not original or old USB2 cable, bad download, etc.
Restart the phone in download mod and try again. Please let us know if you finally succeed.
God luck.
thank you for the rom , install procedure from stock Q ?
izmenar said:
thank you for the rom , install procedure from stock Q ?
Click to expand...
Click to collapse
You can find the instructions in OP. It specifically says "if you are already on Android Q"
Sent from my SM-G975F using Tapatalk
stuck at boot, after i enable ad blocker. can't get into twrp, have to start from scratch.
starbucks2010 said:
<*>Fixed the Samsung SmartWatch BT connection</*>
Click to expand...
Click to collapse
Hi starbucks2010, would you please share the information, what you did to fix that?
Thank you very much!
Very nice.:fingers-crossed:
Thank you? very nice?
Thanks for the beautiful Rom.
Will flash it tomorrow.
Good luck guys. I hope you'll like it.
The stock firm already magisk patched? Tks
Sent from my [device_name] using XDA-Developers Legacy app
I lost root. What should I do?
Thx mate...
downloading now
guastucci said:
I lost root. What should I do?
Click to expand...
Click to collapse
Reflash the patched TWRP.
Does GravityBox work on this rom? Anyone tried?
starbucks2010 said:
Reflash the patched TWRP.
Click to expand...
Click to collapse
Tks. Still don't work for me. So I patched all the AP file with magisk and reinstall everything. Now all is good now. Tks for the rom
Sent from my [device_name] using XDA-Developers Legacy app
SuperiorOS Android 11 for Samsung Galaxy A51 – Custom ROM
February 12, 2021 | By [email protected] | CUSTOM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Install SuperiorOS Android 11 on Samsung Galaxy A51. SuperiorOS comes with ROM OS Android 11 and basic feature only, Brought to you by: [email protected] Status: Stable, SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla ( ARM64-AB ). This ROM Required: TWRP 3.5.0 Android 11 support One UI 3.0. Use at your own risk, I’m not responsible for bricking your device.
Download
Your phone must be Installed TWRP Recovery for Android 10. If not, you can read TWRP Root Samsung Galaxy A51 SM-A515F Android 11 DUB1 Firmware ( Recommended )
Download SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla.img.xz ( extract it to get img file, use 7-zip )
Download latest open_gapps-arm64-11.0-nano-20210110-TEST.zip ( if necessary )
Download ChonDoe_Flasher.zip
How to use ChonDoe_Flasher
Change SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla.img to system.img
Copy ChonDoe_Flasher.zip and system.img to external sd card or Internal Storage. You can also put it into a folder that you want. In the video below I named the folder with “ROM”. Copy both to the ROM folder.
For more detail read How to Install GSI and GAPPS on Dynamic Partition Samsung Galaxy A51
Notes:The phone must be installed Stock/Official Android 11 for A51, then you can flash the TWRP 3.5.0 Android 11. I don’t recommended install this GSI ROM using TWRP 3.5.0 Android 10, you will face Random rebooting. Read How to Update / Upgrade Samsung Galaxy A51 SM-A515F to Android 11 Official
How to Install SuperiorOS on Samsung Galaxy A51:
Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe – Advanced wipe ( select “Dalvik, Cache, Data” ) – Swipe to wipe
Select Install ChonDoe_Flasher.zip and Swipe to confirm Flash
Select Wipe – Format data ( type “yes” and confirm )
Select Reboot – System
Install GApps if necessary
Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select open_gapps-arm64-11.0-nano-20210110-TEST.zip Swipe to confirm Flash
Select Reboot – System
Bugs
Fingerprint and small issues
If you want to uninstall this custom ROM and back to stock ROM, just flash the stock ROM to your device. Flashing stock ROM will also uninstall TWRP Recovery and it will back to stock Android Recovery.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, flash custom rom and Rooting will trip the KNOX WARRANTY VOID status!
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Remember twrp in this moment no backup or restore system partition. Backup your data in sd card
Reserved news
Hello hacker812c ,I just see I had Android 10 and UI 2.5.
Is there a way to upgrade ,my phone is already rooted .
After that ,can I root your rom with Magisk ?
Thanks from France !
double tap to wake ,works bro ¿
darkshinigami said:
double tap to wake ,works bro ¿
Click to expand...
Click to collapse
Sorry my friend this option is present only in stock
fleafred said:
Hello hacker812c ,I just see I had Android 10 and UI 2.5.
Is there a way to upgrade ,my phone is already rooted .
After that ,can I root your rom with Magisk ?
Thanks from France !
Click to expand...
Click to collapse
Upgrade to Android 11 via ota to dub1
After this root And install
Or
Flash in odin only CP and bootloader
After install CP and BL You continue rooted
Enter in twrp and install custom rom
Refined OS or Superior OS
Hi. Thx for ur work.
Im atm with RefinedUI v2.0 (OneUI3.0 - Android11), using OrangeFox for Recovery.
Can i flash this ROM with this Setup (maybe wipe first and switch to TWRP), or do i have to flash Stockrom first?
Thx.
ZapZarap said:
Hi. Thx for ur work.
Im atm with RefinedUI v2.0 (OneUI3.0 - Android11), using OrangeFox for Recovery.
Can i flash this ROM with this Setup (maybe wipe first and switch to TWRP), or do i have to flash Stockrom first?
Thx.
Click to expand...
Click to collapse
Thanks
I m using refined ui too
To install this ROM enter recovery
Wipe data and install
I not recomend return stock
Using twrp you install New roms
I m using refined ui too
ty for the information.
Can i flash from OrangeFox-Recovery or do i have to switch and flash twrp first?
Quickly enter in twrp
Install Oficial twrp app
Download in Google play
After install open app
Use menu tô Reboot in recovery
ZapZarap said:
ty for the information.
Can i flash from OrangeFox-Recovery or do i have to switch and flash twrp first?
Click to expand...
Click to collapse
Enter in recovery
Wipe cachê and data
Install ROM and magisk
hacker812c said:
Upgrade to Android 11 via ota to dub1
After this root And install
Or
Flash in odin only CP and bootloader
After install CP and BL You continue rooted
Enter in twrp and install custom rom
Refined OS or Superior OS
Click to expand...
Click to collapse
Hello,
OK,done and working well and fast.
But I tried to root with Magisk and no way cause no Ramdisk.
Is there an other way to foot ?
Thanks a lot ,good d'Ay .
fleafred said:
Hello,
OK,done and working well and fast.
But I tried to root with Magisk and no way cause no Ramdisk.
Is there an other way to foot ?
Thanks a lot ,good d'Ay .
Click to expand...
Click to collapse
Yes
[ROOT] ROOT Android 10 and 11 ROM GSI Treble
How to ROOT android 11 PHH Any ROM This these steps have been tested in Havoc OS 4.1 Treble PHH Credits SuperSu apk PHH Credits Scripts @washinson I upload files and Scripts from two threads to update this method. SuperSu apk from Phh Aosp 11 and...
forum.xda-developers.com
Hello again,
Just an other "little" question. I must have touched something wrong and I've got a notch in the BOTTOM of the screen, I retried everything but...
For that, I just found a way...
Auto rotation, rotation allowed to 180 then no rotation :solved.
I didn't understand...
Good night to those who are sleeping !
fleafred said:
For that, I just found a way...
Auto rotation, rotation allowed to 180 then no rotation :solved.
I didn't understand...
Good night to those who are sleeping !
Click to expand...
Click to collapse
Thanks for participate
are there any bugs with brightness? Lower than stock?
xdaf0rum said:
are there any bugs with brightness? Lower than stock?
Click to expand...
Click to collapse
Hello,
It depends on what U call bug.
For me, It's working well and I can even makee It lower than before if désire.
TWRP Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads TWRPInstallation (for all MIUI roms )
Code:
fastboot boot boot_lisa.img
We boot into the recovery and flash the zip through it.
In the Fox folder you will find magisk + RW mount. (installation optional).
We clean the dalvik and reboot into the system
Works:
ADB
Decryption of /data
MTP
Flashing (opengapps, roms, images and so on)
Backup/Restore
USB OTG
CPU temperature
Vibration
A/B partition functions
ADB SIDELOAD
SD-CARD
PS: For AOSP - Please wait
You can donate on the link below:
Donate
Spoiler: SCREENSHOT
OrangeFox Recovery | Build in Cloud
Device Tree TWRP
My Telegram
NEW 23/04/2023: OrangeFox BetaTest / a13 - vendorboot recovery AOSP/MIUI
Version Information
Status: Unofficial
Current Release Version: 3.7_012
Release Date: 27-Feb-2023
This is very good news, it was about time that Lisa had a recovery for Android 13.
Thanks for sharing.
What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!
A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.
miki1966 said:
A moment ago
Add bookmark
#125
Excellent recovery. Fully functional. Very good data decryption and OTG. Only the temperature sensor is not working but that's not a big deal. Surely there will be an evolution and it will be fixed. I use MI 11 lite 5g NE (lisa), MIUI 14 global (eea) android 13.
Click to expand...
Click to collapse
How do you install it???
quasyl said:
What a wonderful new! Previous version for Android 12 where absolutely perfect, I am sure that this update is, or soon will be also an excellent version.
Thank you very very much!
@Dkpost3 :
I would like to send a little contribution, have you a PayPal account?
Edit: I just installed it on my Lisa running Xiaomi.eu miui 13 weekly version (Android 12): It works perfectly on Android 12, the only limit (it's a beta version) is that it can't read the ext storage. I immediately installed the update to Xiaomi.eu update to miui 14 (14.05) stable without formatting. I don't notice any problem till now.
After update the stock recovery came back so I flashed again this new one through fastboot, first I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
At the end I flashed successfully magisk 25.2. I am really impressed with the wonderful work of Dkpost3!
Click to expand...
Click to collapse
thnks
mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
are you having problems?
anyone tried this on MIUI 14 China ROM?
I was almost installing for aosp rom.
Greetings,....thank you very much the twrp sir...working nicely for my phone....i use miui 14 eu and android 13
PaperKing13 said:
anyone tried this on MIUI 14 China ROM?
Click to expand...
Click to collapse
Yes. It works perfectly. I flashed xiaomi.eu rom (based on cn version ) and magisk. I also did a full backup.
I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!
mohamadreza40 said:
How do you install it???
Click to expand...
Click to collapse
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
Thank you very much, you did an excellent job I also directly flashed the xiaomi.eu 14.06 zip and the system booted.
miki1966 said:
First I booted boot_lisa.img then I flashed it definitely from inside recovery using the zip file.
Click to expand...
Click to collapse
I don't know how do it ... Can you help me ??
mohamadreza40 said:
I don't know how do it ... Can you help me ??
Click to expand...
Click to collapse
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!
miki1966 said:
Unlock your bootloader (if it's not already unlocked)
Onstall adb, fastboot and related USB drivers on your PC
Restart your phone in bootloader mode
Open a command line window/terminal emulator on your PC
Change to the adb directory on your PC
Boot TWRP 3.7_012 by running: fastboot boot boot_lisa.img
After TWRP 3.7_012 has booted, check that everything is working, such as that the data partition is mounted correctly and that the touchscreen is working.
Find and select the TWRP 3.7_012 zip on your phone, tap and swipe to install it.
After installation, your phone will automatically reboot into TWRP 3.7_012
Enjoy!
Click to expand...
Click to collapse
Thanks my friend
Dkpost3 said:
are you having problems?
Click to expand...
Click to collapse
No just i try it
xabier-bo said:
I've not been able to download it, but MANY THANKS for your recovery!!
Is there any other place to download it?
yandex complains about the limit of downloads
thanks!
Click to expand...
Click to collapse
pls check
CPU temperature * Test Build
Vibration * Test Build
SD-CARD ** Test Build
risingOS v1.0 for OnePlus Nord [avicii]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is risingOS?
risingOS is An OpenSource Aftermarket Android Operating System that aims to deliver unique and refreshing android experience.
What's working?
Most functionality runs without issue(s).
Variants available
GAPPS : With Google Services
AOSP : Without Google Services
Bugs and Issues
Please tell me with a logcat attached
First Time Install / Clean Flash
1. Download the flashable ZIP for avicii
2. Reboot to Recovery
3. Flash the rom using ADB sideload or flash the ZIP file from internal storage using Recovery
4. Clear Data & Dalvik/ART Cache (If using Custom Recovery and the previously installed rom is FBEv2)
Format Data (If using AOSP recovery or previously installed rom is FBEv1)
5. Reboot to System
Update / Dirty Flash
1. Reboot to Recovery
2. Download the flashable ZIP for avicii (ADB sideload or flash from internal storage using Recovery)
3. Reboot to System
Download
(Rising OS - Lineage OS - AOSP recovery is provided. You can either use the provided recovery or a custom recovery to flash this rom)
Device Support Group
Donate to support build
UPI : [email protected]
Paypal• Android Version: 13.0_r41
• Build Author: Sreeshankar K
• Source Code: https://github.com/RisingTechOSS
• Device Tree:
https://github.com/Sanju0910/risingos_device_oneplus_avicii
• Kernel Source Code: https://github.com/Sanju0910/android_kernel_oneplus_avicii
Reserved
Reserved
Reserved
Changelog [29/04/2023]:
• Sync with latest source
• Upstream Kernel to 4.19.282
• Updated QSSI Blobs from LA.QSSI.13.0.r1-09700-qssi.0 (Use perf configs from OOS)
• Kernel tweaks to optimise AOD (Credits: jabashque)
• Introduce Kernel level rooting : KernelSU : Get root access without breaking CTS profile match and safetynet (Credits: tiann)
• Include UDFPS Customisation
From what oos version should i flash?
acopier said:
From what oos version should i flash?
Click to expand...
Click to collapse
Currently on which rom?
Also how much sot?
Sreeshankar K said:
Currently on which rom?
Click to expand...
Click to collapse
Oos 10
I am using this room for more than 7 days. Here are my review.
Good things..
1. This rom is so smooth, i didn't feel any leg. I tried many roms including pixel experience plus but it have legs in notification panel. But this rom have no leg in whole ui.
2. So much customisation. Your phone, your way. (Without root, with root you can do more)
3. Take screenshot in restricted apps without root. (Just disable windows secure flag)
4. Option to create 5Ghz hotspot. (Pixel experience plus doesn't have this feature).
5. And much more..
Bad things...
Everything in this rom is good.
Give a try to experience your new OnePlus Nord.
A very big thanks to developer.
princen41 said:
I am using this room for more than 7 days. Here are my review.
Good things..
1. This rom is so smooth, i didn't feel any leg. I tried many roms including pixel experience plus but it have legs in notification panel. But this rom have no leg in whole ui.
2. So much customisation. Your phone, your way. (Without root, with root you can do more)
3. Take screenshot in restricted apps without root. (Just disable windows secure flag)
4. Option to create 5Ghz hotspot. (Pixel experience plus doesn't have this feature).
5. And much more..
Bad things...
Everything in this rom is good.
Give a try to experience your new OnePlus Nord.
A very big thanks to developer.
Click to expand...
Click to collapse
Hi
what recovery did you do with?
I am under OS12 stock boot loader unlock
Is the battery good?
Does it have 5G
thanks
jédocam said:
Hi
what recovery did you do with?
I am under OS12 stock boot loader unlock
Is the battery good?
Does it have 5G
thanks
Click to expand...
Click to collapse
I used orangefox recovery for oos 12. It supports 5G. Battery is good.
Don't flash recovery, just boot recovery via
Fastboot boot recovery.img (on oos 12)
After installing custom rom you can flash custom recovery.
princen41 said:
I used orangefox recovery for oos 12. It supports 5G. Battery is good.
Don't flash recovery, just boot recovery via
Fastboot boot recovery.img (on oos 12)
After installing custom rom you can flash custom recovery.
Click to expand...
Click to collapse
THANKS
I still have two questions:
I don't really know this recovery
I took the one ORANGEFOX RECOVERY PROJECT - R11.1_4
Can you tell me the steps in this recovery:
data format etc....
do i have to flash it after installing the rom?
jédocam said:
THANKS
I still have two questions:
I don't really know this recovery
I took the one ORANGEFOX RECOVERY PROJECT - R11.1_4
Can you tell me the steps in this recovery:
data format etc....
do i have to flash it after installing the rom?
Click to expand...
Click to collapse
1. Boot into recovery. (Don't flash)
2. Flash rom.
3. Formate data and internal storage.
4. Now you can flash custom recovery.
5. Reboot and enjoy.
princen41 said:
1. Boot into recovery. (Don't flash)
2. Flash rom.
3. Formate data and internal storage.
4. Now you can flash custom recovery.
5. Reboot and enjoy.
Click to expand...
Click to collapse
Thanks
jédocam said:
Thanks
Click to expand...
Click to collapse
I just booted into orangefox recovery
it asks me for a code: decrypt partition .... I think ....
what code should I enter my pin code? or i can skip this step
THANKS
jédocam said:
I just booted into orangefox recovery
it asks me for a code: decrypt partition .... I think ....
what code should I enter my pin code? or i can skip this step
THANKS
Click to expand...
Click to collapse
You can enter your screen lock code, if you are on oos 12. If you decrypt partition, you can install rom from your internal storage. If you skip this step, you can install rom from adb sideload.
In both case you can install rom.
princen41 said:
1. Boot into recovery. (Don't flash)
2. Flash rom.
3. Formate data and internal storage.
4. Now you can flash custom recovery.
5. Reboot and enjoy.
Click to expand...
Click to collapse
Hi
I think I have time to do it tonight
via the method
decrypt partition
Via OTG Support
4 - Can I at the end flash the recovery in zip from my USB key support?
thanks again
jédocam said:
Hi
I think I have time to do it tonight
via the method
decrypt partition
Via OTG Support
4 - Can I at the end flash the recovery in zip from my USB key support?
thanks again
Click to expand...
Click to collapse
You can flash it via USB. Or you can use PC or another android device to flash zip.
Hi
I just did all the steps
and when i reboot system
it reboots to recovery without stopping
what should i do please