[ROM] Stock Rom 9.0 Flash and Repair [Full] @XDAfriends hello my friends
New Update Stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 8.1 e 9.0
Build date Mon, Jul 2019 12:24:39 +0700
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730x
[Flash]
To Flash or Repair your original system
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and Add the firmware file to AP / PDA
9. Select too CP partition in the firmware folder
10. Select too CSC partition in the firmware folder
11. Select too Userdata partition in the firmware folder
12. Click the start button, sit back and wait few minutes
13. This method reinstall your rom to original state
[Recomendation]
Install Your stock 9.x or Install 9.x Custom Stock
Install TWRP
Install Root Magisk
Install Kernel Helios 3.x
[Information]
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition, under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
Download Odin v3.13.1
https://www.filesbeast.net/download/1/Odin 3.13.1.zip
Servers
https://www.stockrom.net/samsung
Press F3 and search your model
https://www.sammobile.com/firmwares/
J730G
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/
J730F
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730F/
J730GM
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730GM/
J730FM
.https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730FM/
Search your model on page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What file of the 5 that come must be put in the box USERDATA?
Thank you
ismago said:
What file of the 5 that come must be put in the box USERDATA?
Thank you
Click to expand...
Click to collapse
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
NathyAndrade said:
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
Click to expand...
Click to collapse
Ok. Thank you
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Hello,
Odin's link is bad.
Should be:
https://dl.sammobile.com/Odin3-v3.13.1.zip
not very clear: you don't say anything about the BL file or the options for Odin
ismago said:
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Click to expand...
Click to collapse
I using root normaly steps
1. Access onfiguration and developer options
2. Select - unlock by oem
3. Reboot in stock recovery
4. Wipe and factory reset
5. Reboot in download mode
6. Flash twrp and reboot in twrp directly
7. Flash supersu 2.82 and root is perfectly
My iPhone is j730g and root is ok
Forget about supersu and install magisk instead. Follow the steps here: https://forum.xda-developers.com/ga...-3-1-1-1-j7-pro-sm-j730f-g-gm-t3662621/page14
arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
Read first post about BT CP CSC and AP details
New OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 7.0
Changelist 13203669
Build date Mon, 12 Mar 2018 13:25:39 +0000
Security Patch Level 2018-03-01
Product code All variants
PDA J730GUBU3ARC2
CSC J730GZTO3ARC2
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx
new OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/ZTO/download/J730GUBU3ARC2/214163/
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx
arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
hacker812c said:
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
Click to expand...
Click to collapse
What are you talking about? All these roms are Android 7.0.
Greight said:
What are you talking about? All these roms are Android 7.0.
Click to expand...
Click to collapse
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
does this way allow me keeping updating OTA ?
eraganxs said:
does this way allow me keeping updating OTA ?
Click to expand...
Click to collapse
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
hacker812c said:
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
Click to expand...
Click to collapse
No, there wasn't bro. I'm more or less obsessed with updates and check there regularly. Up till now, all the roms have been 7.0.
hacker812c said:
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
Click to expand...
Click to collapse
Thanks bro
FAQ. about Android 7.0 encryption
Many users still do not understand why they try to root in
Android 7.0 and go through problems like bootloop
One of the causes of this problem is the encryption of Nougat android 7.x
Recomendations for Root or TWRP
Boot your device to RECOVERY [Stock] mode then select
FACTORY RESET. THIS WILL WIPE YOUR DEVICE AND YOU WILL LOSE ALL DATA.
(This procedure is required to remove encryption or your device won't boot)
From RECOVERY, IMMEDIATELY Boot your device to DOWNLOAD mode then
connect your USB cable. (DO NOT LET YOUR DEVICE REBOOT NORMALLY
OR YOUR DEVICE WILL RE-ENCRYPT
After this point flash Recovery TWRP and open TWRP immediately
and flash Supersu 2.82.zip [Recomended]
At this point your root is perfectly
-------------------------//--------------------------
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition; under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
Related
Team Win Recovery Project 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: Note 10(Exynos variants - N970/971/975/976/N/F/B)
Download
Sources:
TWRP Tree and kernel source
Changelog:
15.12.2019
- Updated TWRP for Android 10.0
- From now on no more Magisk Prepatched images (if you need it patch it byself or flash my kernel where patched recovery is not needed)
22.09.2019
-Reverted MTP Changes from last build since for some mtp dont worked in system
21.09.2019
- Fixed the bug that mtp dont worked any more on TWRP when usb cable got disconnected and reconnected
- Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
- Reverted FFS MTP changes since new way is more stable
14.09.2019
- Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
- Removed File Based backups because the phone refuses to boot from filebased backups since they breaks the rootfs
27.08.2019
-Initial Release
Bugs:
-No one
Telegram Group
https://t.me/twrp_n10
XDA:DevDB Information
[RECOVERY] TWRP for Galaxy Note 10 (Exynos), Kernel for the Samsung Galaxy Note 10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2019-08-27
Created 2019-08-27
Last Updated 2019-12-15
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp
flash the disabler that is on TWRP download link
flash my kernel avaiable here
press reboot to system in twrp.
so since i am not all the time here on xda here is a telegram group link. use it for report bugs etc since i dont read all the time the complete thread here https://t.me/twrp_n10
so multidisabler is updated to v2 and stock rom boots again normaly sammy added 2 more encryption in the n10 that needed to get disabled
Magisk Patched builds are now uploaded too for the one that dont wants to patch byself
Great work! Stuck with the snapdragon hopefully something pops up for us.
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
Click to expand...
Click to collapse
Easy, just Pay for premium YouTube
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
No root needed for that
ahno banaag said:
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go ?
Click to expand...
Click to collapse
Gilad.i said:
ahno banaag said:
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go
Click to expand...
Click to collapse
Don't forget to install micro g with YouTube vanced too.
I used to root just for adaway and YouTube mods, but with ad guard and YouTube vanced I feel I no longer need to root my devices.
Click to expand...
Click to collapse
nvm
So ASHE sources are out. Today after work i will upload ASHE builds for all 4 modells
So new builds are uploaded and note 10+ bootloop issue is fixed (magisk manager corrupted me recovery.img on last builds)
so today again a big update will be here and thats twrp with working mtp in system and recovery
so new builds with working mtp are uploaded
geiti94 said:
Guide:
......
7. reboot in download mode and flash the magisk prepatched tar for your device with odin in the AP field (if you want to patch twrp byself download unpatched tar and select it in magisk manager. patched tar is in downloads folder after patch)
.......
9. flash the multidisabler zip by ian in twrp
........
Click to expand...
Click to collapse
Hello,
I hope you're fine sir,
I just got my Note 10 plus and about to root it,
However, I am a bit lost when you said magisk prepatched and unpatched, what is the difference...?
Also, for the multidisabler , there are formatting steps, so should I do your steps and do the multidisabler thread steps, or yours are enough...?
I just want a perfect flash, I had a terrible experience with my Note 9 unfortunately due to misunderstanding the steps...:crying:
For now, I'll be backing up and completing all the steps required before I move on the new phone...
I do hope you or anyone else sees this and guides me through...:fingers-crossed:
Bless you and all developers and helpers :good::angel:
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
I have the same problem, I have magisk and TWRP but it doesn't detect sim. did you find a solution?
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
Okay. I have solved it by flashing the original firmware downloaded from Sam mobile, after that I repeated the steps but I changed the AP file since I had downloaded the one from N976, download the correct ones for N975 and it was fixed. I already recognized the SIM
Help, cant backup the system image.
Hi, i need some help.
I had n975 and twrp 3.3.1 ASHE install with magisk patched.
I still on stock rom with magisk. I tried to backup using twrp. When backing up system image(about 6 gb), it failed.
I am manage to backup others like modem, recovery and others.
What should I do to backup system?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom v6.4
Based on Android 13 G98xF(B)XXUHHWED firmware
Supported Devices: G980F, G981B, G985F, G986B and G988B
ROM Features
<*>Supported devices: G980F (S20), G981B (S20 5G), G985F (S20+), G986B (S20+ 5G) and G988B (S20 Ultra)</*>
<*>Base OneUI 5.1 Android 13 G98xF(B)XXUHHWED deodex June 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed automatic encryption, vaultkeeper services</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.4.x-mod1.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v6.4
<*>Updated to latest HWED June 2023 OneUI 5.1 patch level</*>
<*>Kernel patched with magisk canary 26101l</*>
<*>Stock SHealth fix (tbc)</*>
Notes
<*>Install magisk canary 26201 app in TWRP</*>
Credits
- John Wu for Magisk
- Mr. Waehere for CRB kitchen
- corsicanu for S20 TWRP
- aliwaris for incallui mods
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
- LeeXDA18 for some fixes and porting Object remover mod from S23
- Nguyen for back2kill mod
- All testing team
Download Links
G98xFB BR64 HWED Link
Official TWRP thread for S20 Series
Installation procedure
IS MANDATORY TO BE ON A13 AT LEAST HWCG/HWD4/HWED FW BEFORE FLASHING BR 64 !!!
Dirty flash of BR 6.x over any Android 12 will brick your device !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download latest stock FW for your phone model using Frija or Samfw and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download latest compatible TWRP for your specific device from the official TWRP xda thread (link above), rename it to recovery.img. Download the patched vbmeta.img file from below. Using 7Zip app add the 2 files (recovery.img and vbmeta.img) into a .tar file.
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When boot in TWRP, wipe your data if you're encrypted, flash BR 5.x zip and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup your root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
S20 series Root and FW upgrade
BeyondROM S20 Telegram chat
PayPal link
Happy flashing good people!
reserved
I've never been first to comment on a thread after the OP, but there's always a first!
Installing anxiously now and will report back with results
Working perfect on G985F. Great work as always Andrei. Thank You!
Impossible to download.
If I have BeyondRom V1.5 installed and have root can I install BeyondRom V2.0 in recovery as dirty instalation? or I have to do all 10 steps as you wrote?
nijoo said:
If I have BeyondRom V1.5 installed and have root can I install BeyondRom V2.0 in recovery as dirty instalation? or I have to do all 10 steps as you wrote?
Click to expand...
Click to collapse
No you should not be able to. And yes follow steps. You need to change your bootloader, modem etc.
Disappointing, I followed your directions to the letter and I have a soft bricked 985f. I have tried to flash 3 times now. I flashed and it goes all the way to pass but then when I try to boot twrp it sits there. Yes I'm plugged in to my pc, even tried multiple cords and ports and clean install, never can get to twrp. Gotta sleep, hopefully it doesn't burn in overnight since I can't shut it off.
I second that. Works perfectly on my 985f
jhr5474 said:
Disappointing, I followed your directions to the letter and I have a soft bricked 985f. I have tried to flash 3 times now. I flashed and it goes all the way to pass but then when I try to boot twrp it sits there. Yes I'm plugged in to my pc, even tried multiple cords and ports and clean install, never can get to twrp. Gotta sleep, hopefully it doesn't burn in overnight since I can't shut it off.
Click to expand...
Click to collapse
Show me the content of the twrp tar you flash
You are great man. Thank you.
Looking forward to install it on my g980f
I used the vmbeta.img and the ianmcd recovery, i made them into a tar with 7zip and I renamed it to recovery.img before combining. I even copied and pasted the name you said to name it. Could we get a link to the correct twrp?
I agree it has to be the twrp, but I got the one mentioned off of telegram the twrp telegram by ian.
that is the twrp i used.
Hi mate
Thx for all of it
i installed on 988B working correctly
By the way, has anyone tried install xposed ?
jhr5474 said:
I used the vmbeta.img and the ianmcd recovery, i made them into a tar with 7zip and I renamed it to recovery.img before combining. I even copied and pasted the name you said to name it. Could we get a link to the correct twrp?
I agree it has to be the twrp, but I got the one mentioned off of telegram the twrp telegram by ian.
View attachment 5158181 that is the twrp i used.
Click to expand...
Click to collapse
I made the mistake of not resetting odin, as soon as I reset odin i was able to flash recovery and then rom, thank you !!!!
Twrp 1a28 BeyondRom 2.0 not installing.
Twrp 1a23 BeyondRom 2.0 smoothly installing.
LENO7 said:
Twrp 1a28 BeyondRom 2.0 not installing.
Twrp 1a23 BeyondRom 2.0 smoothly installing.
Click to expand...
Click to collapse
What do you mean not installing? Get any errors? Many people already installed it.
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
AMDPOWERFIST said:
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
Click to expand...
Click to collapse
Use Samfirm or Frija. They're super fast
AMDPOWERFIST said:
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
Click to expand...
Click to collapse
Hi Dude
you can use this gdrive link its superfast also
Google Drive - Virus scan warning
drive.google.com
SuperiorOS Android 11 for Samsung Galaxy A51 – Custom ROM
February 12, 2021 | By [email protected] | CUSTOM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Install SuperiorOS Android 11 on Samsung Galaxy A51. SuperiorOS comes with ROM OS Android 11 and basic feature only, Brought to you by: [email protected] Status: Stable, SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla ( ARM64-AB ). This ROM Required: TWRP 3.5.0 Android 11 support One UI 3.0. Use at your own risk, I’m not responsible for bricking your device.
Download
Your phone must be Installed TWRP Recovery for Android 10. If not, you can read TWRP Root Samsung Galaxy A51 SM-A515F Android 11 DUB1 Firmware ( Recommended )
Download SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla.img.xz ( extract it to get img file, use 7-zip )
Download latest open_gapps-arm64-11.0-nano-20210110-TEST.zip ( if necessary )
Download ChonDoe_Flasher.zip
How to use ChonDoe_Flasher
Change SuperiorOS-Xcalibur-GsiTestProjects-arm64-ab-Vanilla.img to system.img
Copy ChonDoe_Flasher.zip and system.img to external sd card or Internal Storage. You can also put it into a folder that you want. In the video below I named the folder with “ROM”. Copy both to the ROM folder.
For more detail read How to Install GSI and GAPPS on Dynamic Partition Samsung Galaxy A51
Notes:The phone must be installed Stock/Official Android 11 for A51, then you can flash the TWRP 3.5.0 Android 11. I don’t recommended install this GSI ROM using TWRP 3.5.0 Android 10, you will face Random rebooting. Read How to Update / Upgrade Samsung Galaxy A51 SM-A515F to Android 11 Official
How to Install SuperiorOS on Samsung Galaxy A51:
Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe – Advanced wipe ( select “Dalvik, Cache, Data” ) – Swipe to wipe
Select Install ChonDoe_Flasher.zip and Swipe to confirm Flash
Select Wipe – Format data ( type “yes” and confirm )
Select Reboot – System
Install GApps if necessary
Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Install – select open_gapps-arm64-11.0-nano-20210110-TEST.zip Swipe to confirm Flash
Select Reboot – System
Bugs
Fingerprint and small issues
If you want to uninstall this custom ROM and back to stock ROM, just flash the stock ROM to your device. Flashing stock ROM will also uninstall TWRP Recovery and it will back to stock Android Recovery.
Notes / Warning!
Use at your own risk, I’m not responsible for bricking your device.
Using the incorrect file may brick your device.
If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
If you have a KNOX-enabled device, flash custom rom and Rooting will trip the KNOX WARRANTY VOID status!
If your device storage is encrypted, Rooting will wipe your data !
If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
Make sure to backup your important data before root it.
Remember twrp in this moment no backup or restore system partition. Backup your data in sd card
Reserved news
Hello hacker812c ,I just see I had Android 10 and UI 2.5.
Is there a way to upgrade ,my phone is already rooted .
After that ,can I root your rom with Magisk ?
Thanks from France !
double tap to wake ,works bro ¿
darkshinigami said:
double tap to wake ,works bro ¿
Click to expand...
Click to collapse
Sorry my friend this option is present only in stock
fleafred said:
Hello hacker812c ,I just see I had Android 10 and UI 2.5.
Is there a way to upgrade ,my phone is already rooted .
After that ,can I root your rom with Magisk ?
Thanks from France !
Click to expand...
Click to collapse
Upgrade to Android 11 via ota to dub1
After this root And install
Or
Flash in odin only CP and bootloader
After install CP and BL You continue rooted
Enter in twrp and install custom rom
Refined OS or Superior OS
Hi. Thx for ur work.
Im atm with RefinedUI v2.0 (OneUI3.0 - Android11), using OrangeFox for Recovery.
Can i flash this ROM with this Setup (maybe wipe first and switch to TWRP), or do i have to flash Stockrom first?
Thx.
ZapZarap said:
Hi. Thx for ur work.
Im atm with RefinedUI v2.0 (OneUI3.0 - Android11), using OrangeFox for Recovery.
Can i flash this ROM with this Setup (maybe wipe first and switch to TWRP), or do i have to flash Stockrom first?
Thx.
Click to expand...
Click to collapse
Thanks
I m using refined ui too
To install this ROM enter recovery
Wipe data and install
I not recomend return stock
Using twrp you install New roms
I m using refined ui too
ty for the information.
Can i flash from OrangeFox-Recovery or do i have to switch and flash twrp first?
Quickly enter in twrp
Install Oficial twrp app
Download in Google play
After install open app
Use menu tô Reboot in recovery
ZapZarap said:
ty for the information.
Can i flash from OrangeFox-Recovery or do i have to switch and flash twrp first?
Click to expand...
Click to collapse
Enter in recovery
Wipe cachê and data
Install ROM and magisk
hacker812c said:
Upgrade to Android 11 via ota to dub1
After this root And install
Or
Flash in odin only CP and bootloader
After install CP and BL You continue rooted
Enter in twrp and install custom rom
Refined OS or Superior OS
Click to expand...
Click to collapse
Hello,
OK,done and working well and fast.
But I tried to root with Magisk and no way cause no Ramdisk.
Is there an other way to foot ?
Thanks a lot ,good d'Ay .
fleafred said:
Hello,
OK,done and working well and fast.
But I tried to root with Magisk and no way cause no Ramdisk.
Is there an other way to foot ?
Thanks a lot ,good d'Ay .
Click to expand...
Click to collapse
Yes
[ROOT] ROOT Android 10 and 11 ROM GSI Treble
How to ROOT android 11 PHH Any ROM This these steps have been tested in Havoc OS 4.1 Treble PHH Credits SuperSu apk PHH Credits Scripts @washinson I upload files and Scripts from two threads to update this method. SuperSu apk from Phh Aosp 11 and...
forum.xda-developers.com
Hello again,
Just an other "little" question. I must have touched something wrong and I've got a notch in the BOTTOM of the screen, I retried everything but...
For that, I just found a way...
Auto rotation, rotation allowed to 180 then no rotation :solved.
I didn't understand...
Good night to those who are sleeping !
fleafred said:
For that, I just found a way...
Auto rotation, rotation allowed to 180 then no rotation :solved.
I didn't understand...
Good night to those who are sleeping !
Click to expand...
Click to collapse
Thanks for participate
are there any bugs with brightness? Lower than stock?
xdaf0rum said:
are there any bugs with brightness? Lower than stock?
Click to expand...
Click to collapse
Hello,
It depends on what U call bug.
For me, It's working well and I can even makee It lower than before if désire.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Improvements
Device Specific Issues:
VoWiFi/VoLTE
Requirements:
S Firmware
Downloads
Get the latest PixelOS Build for (beyond0lte) (beyond1lte) (beyond2lte) (beyondx)
PixelOS Recovery (beyond0lte) (beyond1lte) (beyond2lte) (beyondx)
Magisk (optional) (Download from here)
Note: GApps are included, don't flash separately.
Notes
• SELinux is enforcing
• EROFS for /vendor
• PixelOS Recovery is highly recommended
• You CAN'T INSTALL this ROM using TWRP or similar, this rom supports only AOSP-Based Recoverys (Like LineageOS Recovery and PixelOS Recovery) - Please don't report bugs if you using TWRP.
• Please report bugs with logs if you found any
Flashing Instructions
Clean flash (coming from a different ROM):
• Make sure your device's bootloader is unlocked
• Power off the device and boot to download mode (Vol Down + Bixby Key + USB Cable)
• Download Samsung Odin and open it (If the device is not recognized, make sure Samsung USB Drivers are properly installed)
• Put the PixelOS_beyond*-13.0-YYYYMMDD-HHMM-recovery.img.tar file in Odin's AP slot and flash it
• At the exact moment the screen goes off, don't remove the USB Cable and boot to recovery mode (Vol Up + Bixby Key + Power)
• Download ROM from the link above
• Format data, cache and system
• Flash ROM using adb sideload or sdcard
• Flash Magisk (Optional)
• Format data and reboot
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Format cache (optional, recommended)
• Reboot and voila!
Credits:
• @Linux4 - For making the trees and officialy maintaing them in LineageOS, for giving me access to A13 device tree. and for helping me!
Join our Telegram Group https://t.me/PixelOSChat
Buy me a Coffee https://ko-fi.com/jubscleisson
Source Code
PixelOS http://github.com/PixelOS-AOSP
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/Jubscleisson/android_kernel_samsung_exynos9820
ROM OS Version: Android 13.0
ROM Kernel: Linux 4.14.305
Latest Release Date: 22/02/2023
On HVG4 or HVJ1?
Can I this install on HVJ1?
I installed the firmware first Download firmware G975FXXUGHVJ1 that you cant dl any more. it didnt work now i cant revert to stock as my firmware is to high and i get kernel rev check fail device 16 binary 14 with odin? how can i revert to stock rom then try again?
majordj said:
I installed the firmware first Download firmware G975FXXUGHVJ1 that you cant dl any more. it didnt work now i cant revert to stock as my firmware is to high and i get kernel rev check fail device 16 binary 14 with odin? how can i revert to stock rom then try again?
Click to expand...
Click to collapse
I don't know. I installed HVJ1 and it work for me. I can't back to HVG4.
ZmisiS said:
I don't know. I installed HVJ1 and it work for me. I can't back to HVG4.
Click to expand...
Click to collapse
thanks for the help??? do you know anyone that knows how to fix it
mine just hangs on the samsung screen and nothing. id like to go back to android 12 but cant due to the firmware ive installed trying this.
majordj said:
mine just hangs on the samsung screen and nothing. id like to go back to android 12 but cant due to the firmware ive installed trying this.
Click to expand...
Click to collapse
I installed HVJ1 with ODIN. Open download mode and in ODIN add AP, BL, CP and CSC file and Start. That should work and the system should rise.
My phone je Samsung Galaxy S10 (SM-G973F). The same applies to the S10+.
Try this way. It worked for me. Connect the phone to the PC. Press the Down Vol buttons together. + Bixby + Power. When the phone vibrates, release the Power button and wait for Download mode to open.
Another way is to connect your phone and computer with a USB cable and press the Power + Val Down buttons together and hold them until the screen turns black and vibrates. After that, while the screen is black, release the keys and press the Power + Val Up + Bixby keys together. Keep it until the recovery opens. When Recovery opens, turn off your phone in Recovery. In Lineage OS Recover go to Advanced and there you can turn off the phone. After entering recovery, you can disconnect the USB cable. After that, connect your phone and computer with a USB cable and open the download mode.
ZmisiS said:
I installed HVJ1 with ODIN. Open download mode and in ODIN add AP, BL, CP and CSC file and Start. That should work and the system should rise.
My phone je Samsung Galaxy S10 (SM-G973F). The same applies to the S10+.
Try this way. It worked for me. Connect the phone to the PC. Press the Down Vol buttons together. + Bixby + Power. When the phone vibrates, release the Power button and wait for Download mode to open.
Click to expand...
Click to collapse
The file is not there any more on the site for s10+?
majordj said:
The file is not there any more on the site for s10+?
Click to expand...
Click to collapse
I did not understand. Don't you have HVJ1? You can download HVJ1 from Frija. Do you have OXM multi CSC? If yes, you can download this firmware with Frija.
majordj said:
The file is not there any more on the site for s10+?
Click to expand...
Click to collapse
I installed the firmware and for that you only need BL and you put the firmware in there now i have installed the firmware im to high to go back? there is not files in the firmware to add the AP etc etc? is there a custom firmware that i can use to revert back to any android before 13 firmware
the latest firmware from the link was G975NKSU7HVG5 this moved mine up
majordj said:
I installed the firmware and for that you only need BL and you put the firmware in there now i have installed the firmware im to high to go back? there is not files in the firmware to add the AP etc etc? is there a custom firmware that i can use to revert back to any android before 13 firmware
Click to expand...
Click to collapse
I can't on Android 13 either because I installed the latest HVJ1 firmware.
You wrote: "mine just hangs on the samsung screen and nothing."
If you can use the latest HVJ1 firmware, wait for the developers to adapt the new custom ROMs to the new firmware.
ZmisiS said:
I can't on Android 13 either because I installed the latest HVJ1 firmware.
You wrote: "mine just hangs on the samsung screen and nothing."
If you can use the latest HVJ1 firmware, wait for the developers to adapt the new custom ROMs to the new firmware.
Click to expand...
Click to collapse
so basically i cant do anything till new roms come out on that firmware cause i installed the latest 13 firmware?
majordj said:
the latest firmware from the link was G975NKSU7HVG5 this moved mine up
Click to expand...
Click to collapse
Download firmware from Frija za Stock ROM. I tried on Frija download HVJ1 for S10+ and it works. You have a picture in one of my comments above.
nope it now stuck on device is 16 binary is 15.... please help me change this in ODIN
majordj said:
nope it now stuck on device is 16 binary is 15.... please help me change this in ODIN
Click to expand...
Click to collapse
You need go out from Download mode and go out ODIN. Now again open Download mode and ODIN. In ODIN use AP, BL, SP and CSC files and Start.
majordj said:
nope it now stuck on device is 16 binary is 15.... please help me change this in ODIN
Click to expand...
Click to collapse
Download firmware updates for your Samsung mobile phone and tablet
Firmware for Samsung Galaxy mobile phone & tablet ✔ Find any update, ever released by Samsung. ✔ Free downloads & high-speed options available. ✔ For all versions and all devices. ✔ Including instructions
www.sammobile.com
Ryu--X said:
Download firmware updates for your Samsung mobile phone and tablet
Firmware for Samsung Galaxy mobile phone & tablet ✔ Find any update, ever released by Samsung. ✔ Free downloads & high-speed options available. ✔ For all versions and all devices. ✔ Including instructions
www.sammobile.com
Click to expand...
Click to collapse
With Frija he can download HVJ1 for phone. It is faster.
Maybe the file is corrupted...anyway it's another option and i trust in their firmwares.
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery (Download from here)
gapps (Download from here)
Magisk 25.0 or newer for root (after first boot) - (Download from here)
First time installation:
NOTE : Make sure you have the bootloader unlocked(This thread will not entertain bootloader unlock method/discussion on Docomo phones as officially its not allowed by SONY).
NOTE : If your bootloader is not unlocked, Please search on google and DO NOT POST THE QUESTIONS RELATED TO IT HERE.
Step 1 : Flash Stock ROM and boot into it atleast once.
Step 2 : Download the recovery from above link and flash it from fastboot.
fastboot flash boot boot.img
Step 3 : Now reboot into recovery to verify the installation.
With the device powered off, hold Volume Down + Power.
Step 4 : Download the CrDroid ROM(Link in second post).
Step 5 : Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Step 6 : Return to the main menu.
Step 7 : Sideload the crDroid .zip package but do not reboot before you read/followed the rest of the instructions!
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Step 8 : Installing add ons : Even though you are already in recovery, click Advanced, then Reboot to Recovery
When your device reboots, click Apply Update, then Apply from ADB, then adb sideload filename.zip for all desired packages in sequence.
Once you have installed everything successfully, you can now reboot your device into the OS for the first time!
Update installation:
step 1 : OTA is supported for upgrades montly.
step 2 : If you want manuall installation please refer to first time installation instructions.
step 3 : If OTA update fails, you can download the rom manually and apply update via updater app (Settings >> System > Updater >> Local update)
step 4 : Update via OTA or Local Update is recommended
Sources:
ROM: https://github.com/ShujathMohd
Kernel: https://github.com/ShujathMohd/android_kernel_sony_sdm845
Known issues:
Please test and report.
Visit official website @ crDroid.net
Changelog :
24-04-2023
Initial Release
Download : https://sourceforge.net/projects/so...roid-13.0-20230425-xz2c_dcm-v9.4.zip/download
Is it a ported/cooked ROM?
What's the difference between H8324 XZ2C and Docomo?
DrTrax said:
Is it a ported/cooked ROM?
What's the difference between H8324 XZ2C and Docomo?
Click to expand...
Click to collapse
Its built from source.
There are two major changes between Global and Docomo Variant.
1.) System parition size is different in both models.
Global variant have approx 4.2 GB
Docomo have approx 3.7 GB
2.) NFC Chip and drivers are different on both models.
Shujath said:
Its built from source.
There are two major changes between Global and Docomo Variant.
1.) System parition size is different in both models.
Global variant have approx 4.2 GB
Docomo have approx 3.7 GB
2.) NFC Chip and drivers are different on both models.
Click to expand...
Click to collapse
Uf... never had a chance to build a ROM like this... I'd like to try to "create" one for XZ2C since there are almost no other custom ROM there...
Although... I'm already trying to port OrangeFox recovery from akari to xz2c (first dirty mods works fine!)
Shujath said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery (Download from here)
gapps (Download from here)
Magisk 25.0 or newer for root (after first boot) - (Download from here)
First time installation:
NOTE : Make sure you have the bootloader unlocked(This thread will not entertain bootloader unlock method/discussion on Docomo phones as officially its not allowed by SONY).
NOTE : If your bootloader is not unlocked, Please search on google and DO NOT POST THE QUESTIONS RELATED TO IT HERE.
Step 1 : Flash Stock ROM and boot into it atleast once.
Step 2 : Download the recovery from above link and flash it from fastboot.
fastboot flash boot boot.img
Step 3 : Now reboot into recovery to verify the installation.
With the device powered off, hold Volume Down + Power.
Step 4 : Download the CrDroid ROM(Link in second post).
Step 5 : Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Step 6 : Return to the main menu.
Step 7 : Sideload the crDroid .zip package but do not reboot before you read/followed the rest of the instructions!
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Step 8 : Installing add ons : Even though you are already in recovery, click Advanced, then Reboot to Recovery
When your device reboots, click Apply Update, then Apply from ADB, then adb sideload filename.zip for all desired packages in sequence.
Once you have installed everything successfully, you can now reboot your device into the OS for the first time!
Update installation:
step 1 : OTA is supported for upgrades montly.
step 2 : If you want manuall installation please refer to first time installation instructions.
step 3 : If OTA update fails, you can download the rom manually and apply update via updater app (Settings >> System > Updater >> Local update)
step 4 : Update via OTA or Local Update is recommended
Sources:
ROM: https://github.com/ShujathMohd
Kernel: https://github.com/ShujathMohd/android_kernel_sony_sdm845
Known issues:
Please test and report.
Visit official website @ crDroid.net
Click to expand...
Click to collapse
Good job sir, rom is very smooth, and no bug. This my new daily driver rom. Thank you.
DrTrax said:
Uf... never had a chance to build a ROM like this... I'd like to try to "create" one for XZ2C since there are almost no other custom ROM there...
Although... I'm already trying to port OrangeFox recovery from akari to xz2c (first dirty mods works fine!)
Click to expand...
Click to collapse
I will build xz2c Global this weekend.
Shujath said:
I will build xz2c Global this weekend.
Click to expand...
Click to collapse
OMG Thank you very much ♥ BTW I found once an AICP ROM version 8.4 for XZ2C... Do you want that too for comparison if there are any troubles?
So far, the only issue is netflix playback specification, DRM widevine: L3, max playback resolution is only SD. I have tried crdroid feature, spoof netflix, but no luck. Any solution for this?
avatarwan13 said:
So far, the only issue is netflix playback specification, DRM widevine: L3, max playback resolution is only SD. I have tried crdroid feature, spoof netflix, but no luck. Any solution for this?
Click to expand...
Click to collapse
you loose DRM once you unlock the bootloader,
I don't think there is a way to get widevine L1 back on unlocked bootloader
Thanks for making this. I had Docomo device and this is the only flash-able ROM at the moment.
If possible, may I request a brightness slider on statusbar? Not on quick settings. Its where you just slide anywhere on the statusbar to control the phone brightness. I miss this feature.
Also, whenever I pull down the quick settings, it feels quite jerky/lagging. Is it just me?
I only have like 5 tiles.
Shujath said:
you loose DRM once you unlock the bootloader,
I don't think there is a way to get widevine L1 back on unlocked bootloader
Click to expand...
Click to collapse
My xiaomi 11T pro's bootloader is unlocked (currently using evolution-x rom) and no problem with DRM, playback resolution is full hd.
avatarwan13 said:
My xiaomi 11T pro's bootloader is unlocked (currently using evolution-x rom) and no problem with DRM, playback resolution is full hd.
Click to expand...
Click to collapse
Xiaomi&Redmi is one of the only vendors that still gives you Widevine L1 even after BLU. Not gonna happen here on Xperia phones.
Hello,
I would like to know, if the known Front micriphone Software issue is fixed in this OS Form?
Thanks. EW
Thanks for your awesome work！To my surprise, the touching bug that has been bothering me for long seemed to has disappeared after burning this ROM.
Excellent ROM! Thank you so much for making this, I can now finally actually Use my XZ2 Compact.
One small problem - and it might just be me, but I can't seem to get 4G connectivity, only 3G/H+. I checked the bands this device has and I should be able to get a 4G connection with the provider I use in Australia but no luck. Not a big deal right now as 3G hasn't been shutdown here (yet) but just wanted to see if anyone else who uses this ROM has the same issue.
EdgarWollust said:
Hello,
I would like to know, if the known Front micriphone Software issue is fixed in this OS Form?
Thanks. EW
Click to expand...
Click to collapse
Please explain the issue, I dont have any issues with the microphone.
drychemical said:
Excellent ROM! Thank you so much for making this, I can now finally actually Use my XZ2 Compact.
One small problem - and it might just be me, but I can't seem to get 4G connectivity, only 3G/H+. I checked the bands this device has and I should be able to get a 4G connection with the provider I use in Australia but no luck. Not a big deal right now as 3G hasn't been shutdown here (yet) but just wanted to see if anyone else who uses this ROM has the same issue.
Click to expand...
Click to collapse
Does 4g works for you on stock rom?
Also did you try to set 4g/LTE manually in the settings?
Shujath said:
Please explain the issue, I dont have any issues with the microphone.
Does 4g works for you on stock rom?
Also did you try to set 4g/LTE manually in the settings?
Click to expand...
Click to collapse
Yeah I did try manually adding an APN (if that's what you were meaning) but yeah no luck.
I'll see if the SIM works on the stock ROM when I have more time.
Hi,
I thaught this issue is well known, but maybe im missinformed.
I already got the Phone opened an put a New bottommicrophone in, but still its not working while be in a call. (like discribed here https://forum.xda-developers.com/t/microphone-and-speaker-problems.4100053/)
Thanks a lot.
unable to enter into fastboot mode. Getting this error as in the image
is there any other method to install recovery or flashing this rom. BTW im noob in Flashing and this custom rom thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}