Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery (Download from here)
gapps (Download from here)
Magisk 25.0 or newer for root (after first boot) - (Download from here)
First time installation:
NOTE : Make sure you have the bootloader unlocked(This thread will not entertain bootloader unlock method/discussion on Docomo phones as officially its not allowed by SONY).
NOTE : If your bootloader is not unlocked, Please search on google and DO NOT POST THE QUESTIONS RELATED TO IT HERE.
Step 1 : Flash Stock ROM and boot into it atleast once.
Step 2 : Download the recovery from above link and flash it from fastboot.
fastboot flash boot boot.img
Step 3 : Now reboot into recovery to verify the installation.
With the device powered off, hold Volume Down + Power.
Step 4 : Download the CrDroid ROM(Link in second post).
Step 5 : Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Step 6 : Return to the main menu.
Step 7 : Sideload the crDroid .zip package but do not reboot before you read/followed the rest of the instructions!
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Step 8 : Installing add ons : Even though you are already in recovery, click Advanced, then Reboot to Recovery
When your device reboots, click Apply Update, then Apply from ADB, then adb sideload filename.zip for all desired packages in sequence.
Once you have installed everything successfully, you can now reboot your device into the OS for the first time!
Update installation:
step 1 : OTA is supported for upgrades montly.
step 2 : If you want manuall installation please refer to first time installation instructions.
step 3 : If OTA update fails, you can download the rom manually and apply update via updater app (Settings >> System > Updater >> Local update)
step 4 : Update via OTA or Local Update is recommended
Sources:
ROM: https://github.com/ShujathMohd
Kernel: https://github.com/ShujathMohd/android_kernel_sony_sdm845
Known issues:
Please test and report.
Visit official website @ crDroid.net
Changelog :
24-04-2023
Initial Release
Download : https://sourceforge.net/projects/so...roid-13.0-20230425-xz2c_dcm-v9.4.zip/download
Is it a ported/cooked ROM?
What's the difference between H8324 XZ2C and Docomo?
DrTrax said:
Is it a ported/cooked ROM?
What's the difference between H8324 XZ2C and Docomo?
Click to expand...
Click to collapse
Its built from source.
There are two major changes between Global and Docomo Variant.
1.) System parition size is different in both models.
Global variant have approx 4.2 GB
Docomo have approx 3.7 GB
2.) NFC Chip and drivers are different on both models.
Shujath said:
Its built from source.
There are two major changes between Global and Docomo Variant.
1.) System parition size is different in both models.
Global variant have approx 4.2 GB
Docomo have approx 3.7 GB
2.) NFC Chip and drivers are different on both models.
Click to expand...
Click to collapse
Uf... never had a chance to build a ROM like this... I'd like to try to "create" one for XZ2C since there are almost no other custom ROM there...
Although... I'm already trying to port OrangeFox recovery from akari to xz2c (first dirty mods works fine!)
Shujath said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery (Download from here)
gapps (Download from here)
Magisk 25.0 or newer for root (after first boot) - (Download from here)
First time installation:
NOTE : Make sure you have the bootloader unlocked(This thread will not entertain bootloader unlock method/discussion on Docomo phones as officially its not allowed by SONY).
NOTE : If your bootloader is not unlocked, Please search on google and DO NOT POST THE QUESTIONS RELATED TO IT HERE.
Step 1 : Flash Stock ROM and boot into it atleast once.
Step 2 : Download the recovery from above link and flash it from fastboot.
fastboot flash boot boot.img
Step 3 : Now reboot into recovery to verify the installation.
With the device powered off, hold Volume Down + Power.
Step 4 : Download the CrDroid ROM(Link in second post).
Step 5 : Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Step 6 : Return to the main menu.
Step 7 : Sideload the crDroid .zip package but do not reboot before you read/followed the rest of the instructions!
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Step 8 : Installing add ons : Even though you are already in recovery, click Advanced, then Reboot to Recovery
When your device reboots, click Apply Update, then Apply from ADB, then adb sideload filename.zip for all desired packages in sequence.
Once you have installed everything successfully, you can now reboot your device into the OS for the first time!
Update installation:
step 1 : OTA is supported for upgrades montly.
step 2 : If you want manuall installation please refer to first time installation instructions.
step 3 : If OTA update fails, you can download the rom manually and apply update via updater app (Settings >> System > Updater >> Local update)
step 4 : Update via OTA or Local Update is recommended
Sources:
ROM: https://github.com/ShujathMohd
Kernel: https://github.com/ShujathMohd/android_kernel_sony_sdm845
Known issues:
Please test and report.
Visit official website @ crDroid.net
Click to expand...
Click to collapse
Good job sir, rom is very smooth, and no bug. This my new daily driver rom. Thank you.
DrTrax said:
Uf... never had a chance to build a ROM like this... I'd like to try to "create" one for XZ2C since there are almost no other custom ROM there...
Although... I'm already trying to port OrangeFox recovery from akari to xz2c (first dirty mods works fine!)
Click to expand...
Click to collapse
I will build xz2c Global this weekend.
Shujath said:
I will build xz2c Global this weekend.
Click to expand...
Click to collapse
OMG Thank you very much ♥ BTW I found once an AICP ROM version 8.4 for XZ2C... Do you want that too for comparison if there are any troubles?
So far, the only issue is netflix playback specification, DRM widevine: L3, max playback resolution is only SD. I have tried crdroid feature, spoof netflix, but no luck. Any solution for this?
avatarwan13 said:
So far, the only issue is netflix playback specification, DRM widevine: L3, max playback resolution is only SD. I have tried crdroid feature, spoof netflix, but no luck. Any solution for this?
Click to expand...
Click to collapse
you loose DRM once you unlock the bootloader,
I don't think there is a way to get widevine L1 back on unlocked bootloader
Thanks for making this. I had Docomo device and this is the only flash-able ROM at the moment.
If possible, may I request a brightness slider on statusbar? Not on quick settings. Its where you just slide anywhere on the statusbar to control the phone brightness. I miss this feature.
Also, whenever I pull down the quick settings, it feels quite jerky/lagging. Is it just me?
I only have like 5 tiles.
Shujath said:
you loose DRM once you unlock the bootloader,
I don't think there is a way to get widevine L1 back on unlocked bootloader
Click to expand...
Click to collapse
My xiaomi 11T pro's bootloader is unlocked (currently using evolution-x rom) and no problem with DRM, playback resolution is full hd.
avatarwan13 said:
My xiaomi 11T pro's bootloader is unlocked (currently using evolution-x rom) and no problem with DRM, playback resolution is full hd.
Click to expand...
Click to collapse
Xiaomi&Redmi is one of the only vendors that still gives you Widevine L1 even after BLU. Not gonna happen here on Xperia phones.
Hello,
I would like to know, if the known Front micriphone Software issue is fixed in this OS Form?
Thanks. EW
Thanks for your awesome work！To my surprise, the touching bug that has been bothering me for long seemed to has disappeared after burning this ROM.
Excellent ROM! Thank you so much for making this, I can now finally actually Use my XZ2 Compact.
One small problem - and it might just be me, but I can't seem to get 4G connectivity, only 3G/H+. I checked the bands this device has and I should be able to get a 4G connection with the provider I use in Australia but no luck. Not a big deal right now as 3G hasn't been shutdown here (yet) but just wanted to see if anyone else who uses this ROM has the same issue.
EdgarWollust said:
Hello,
I would like to know, if the known Front micriphone Software issue is fixed in this OS Form?
Thanks. EW
Click to expand...
Click to collapse
Please explain the issue, I dont have any issues with the microphone.
drychemical said:
Excellent ROM! Thank you so much for making this, I can now finally actually Use my XZ2 Compact.
One small problem - and it might just be me, but I can't seem to get 4G connectivity, only 3G/H+. I checked the bands this device has and I should be able to get a 4G connection with the provider I use in Australia but no luck. Not a big deal right now as 3G hasn't been shutdown here (yet) but just wanted to see if anyone else who uses this ROM has the same issue.
Click to expand...
Click to collapse
Does 4g works for you on stock rom?
Also did you try to set 4g/LTE manually in the settings?
Shujath said:
Please explain the issue, I dont have any issues with the microphone.
Does 4g works for you on stock rom?
Also did you try to set 4g/LTE manually in the settings?
Click to expand...
Click to collapse
Yeah I did try manually adding an APN (if that's what you were meaning) but yeah no luck.
I'll see if the SIM works on the stock ROM when I have more time.
Hi,
I thaught this issue is well known, but maybe im missinformed.
I already got the Phone opened an put a New bottommicrophone in, but still its not working while be in a call. (like discribed here https://forum.xda-developers.com/t/microphone-and-speaker-problems.4100053/)
Thanks a lot.
unable to enter into fastboot mode. Getting this error as in the image
is there any other method to install recovery or flashing this rom. BTW im noob in Flashing and this custom rom thing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation requirements:
Make sure you are on any Q firmware
Q TWRP (by corsicanu) Make sure to follow the instructions here carefully.
Recommended NikGapps R (optional) (Download from here)
Magisk (optional) - (Read here for installing)
Installation:
If you are coming from Stock Firmware and have encryption enabled, format DATA
Wipe CACHE, DALVIK/ART CACHE and SYSTEM.
Flash crDroid 7.x zip
If you want to have GApps flash them right after flashing the ROM before first boot.
Sources:
ROM: [url]https://github.com/crdroidandroid[/URL]
Kernel: Kernel Source
Download:
Download for S10e
Download for S10
Download for S10+
Working and Known issues:
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- GPS
- Cameras (All of them)
- HWcomposer (HWC)
- Signal indicator
- Double tap to wake
- Wireless PowerShare
Not Working
- VoLTE and VoWiFi will not be implemented (for now) as they heavily depend on samsungs framework
Visit official website @ crDroid.net
ExpressLuke 9820 Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Donate to ExpressLuke
Changelog :
7.1 View changelog
7.2 View changelog
7.4 View changelog
7.5 View changelog
Current changelog View changelog
Detailed installation procedure :
If you are coming from Stock Firmware and have encryption enabled, format DATA
Wipe CACHE, DALVIK/ART CACHE and SYSTEM.
Flash crDroid 7.x zip
Flash nick gapps basic
Reboot system
First boot
Flash magisk image from Ivan'slink (select flash image in twrp and flash. img file to "boot")
Reboot system
Open magisk and follow the wizard
Hit the thx button and donate if you can
Important notes :
MAGISK : never update magisk when the app asks you to. Instead wait for Ivan to upload the new boot image
ONEUI3: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power.
FAQ :
Q: My device is in bootloop, I can't acces download mode or recovery, no combo works, how do I get out ?
A: You can try following:
- Plug your phone in the PC with the USB cable. Then press/hold Bixby + Volume Down and hopefully it will boot to download-mode.
Otherwise try (still plugged in) force shutdown/restart by pressing/ holding Volume Down + Power - as soon as the screen turns off shift to pressing/ holding Bixby + Volume Down for download-mode. Try it at few times as its all about timing.
- If still no luck, unplug your phone and let the battery run out. Then press/hold Bixby + Volume Down and plug in to get to download-mode. This may take some time as the phone needs to recharge a little before it reacts.
- Once in download-mode flash your software before the update via Odin - I would use Home_CSC first trying to save your data.
Q: I lost root after proceeding with latest OTA update. What do I do?
A: flash magisk boot image again just like you did on the first flash (see procedure above).
Q: How do I update magisk ?
A: Wait for Ivan to upload the new boot image here then flash according to the detailed steps above
Q: Can I update Magisk from within the Magisk manager app or by flashing updated magisk .zip ?
A: No. Doing this would create a bootloop, Instead wait for Ivan to upload the new boot image here
Q: Dialer not appearing, no possibility to pick up calls or hang up
A: not related to rom (it's a nick gapps issue)
There's a fix : flash nick gapps "basic" and no other flavor
mastawindu said:
Thx for the ROM, can you confirm the android version?
Click to expand...
Click to collapse
The number 11 in the thread title stands for the Android version.
@turbolukex5 thanks a lot for this rom!
Can i just update from Crdroid 10 to 11 by flashing the rom and new gapps and magisk or do i need to to do a full wipe?
catormeme said:
Can i just update from Crdroid 10 to 11 by flashing the rom and new gapps and magisk or do i need to to do a full wipe?
Click to expand...
Click to collapse
+1
Sent from my [device_name] using XDA-Developers Legacy app
catormeme said:
Can i just update from Crdroid 10 to 11 by flashing the rom and new gapps and magisk or do i need to to do a full wipe?
Click to expand...
Click to collapse
I would recommend a clean flash. I don't know if it's possible to update - and it may cause unknown issues if you do.
HI @turbolukex5,
Thank you for the ROM, nice to see some 11 custom flavor, busy testing, so far looking good! Thank you very much, also to Ivan.
Good going guys!
turbolukex5 said:
I would recommend a clean flash. I don't know if it's possible to update - and it may cause unknown issues if you do.
Click to expand...
Click to collapse
I tried dirty flash nut no luck! Now i wiped and everything is ok...
Happy flashing
Sent from my [device_name] using XDA-Developers Legacy app
did anyone get magisk to work?
catormeme said:
did anyone get magisk to work?
Click to expand...
Click to collapse
Will not install , but phone is rooted [emoji848]
Sent from my [device_name] using XDA-Developers Legacy app
It's working great for me thanks for this. The issues I had were when using the stock gapps package. If it overwrites the one included in the rom the phone won't work. Wiping and flashing rom with basic Niki gapps resolved the issue though in case anyone else gets that issue.
Running great so far! Only one bug:
When always on display is turned off, unlocking the devices takes an extra second. When the always on display is on, it unlocked instant. Hope that can be fixed.
Somehow it's fixed now, I don't know what caused it, changed a lot of settings
Thank you for this great rom @turbolukex5 no bugs so far working great. Is there any way to change fingerprint icon in your rom?
FreeRunner2017 said:
Thank you for this great rom @turbolukex5 no bugs so far working great. Is there any way to change fingerprint icon in your rom?
Click to expand...
Click to collapse
It's possible you may be able to use this app with Magisk root to change your fingerprint icon. By default you can't change it in the rom.
https://pixeldrain.com/u/93zUJ6PG
turbolukex5 said:
It's possible you may be able to use this app with Magisk root to change your fingerprint icon. By default you can't change it in the rom.
https://pixeldrain.com/u/93zUJ6PG
Click to expand...
Click to collapse
Thanks @turbolukex5, how do I install this?
FreeRunner2017 said:
Thanks @turbolukex5, how do I install this?
Click to expand...
Click to collapse
Install magisk via instructions in original post and then install the apk and launch it from the link
hello super rom! i have a problem with my sd card with this rom! any idea please?
Juni3769 said:
hello super rom! i have a problem with my sd card with this rom! any idea please?
Click to expand...
Click to collapse
Next build will have this resolved
J_Dutch said:
The number 11 in the thread title stands for the Android version.
@turbolukex5 thanks a lot for this rom!
Click to expand...
Click to collapse
I kinda know... Hence the question
turbolukex5 said:
Next build will have this resolved
Click to expand...
Click to collapse
okay thank you so much
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
FLASH CUSTOM FIRMWARE TO AVOID WIFI AND FINGERPRINT SENSOR ISSUE!!! DOWNLOAD FROM THE TELEGRAM SUPPORT GROUP
Features:
crDroid features
Flashing Instructions:
Pre-installation:
Recovery
(OrangeFox )
gapps (Download from here)
Magisk 21.0 or newer for root (after first boot) - (Download from here)
First time installation:
1: Android pie stock
2: Unlock bootloader with the official app
3: Flash OrangeFox recovery by adb
4: Reboot to recovery
5: Wipe system,data, cache, dalvik
6: format data (with "type yes"; MANDATORY)
7: Install ROM
8: Install gapps
9: Reboot
10: Reboot to recovery
11: Mount vendor
12: Flash custom firmware v1 (you can find it on the telegram group)
13: Reboot now
Update installation:
[*] OTA update
1: got to settings>system>system update
2: search for new update
3: download and let it install and reboot
Note: depending on the gapps you use, you might need to reinstall them manually
[*] Manual update
1: Reboot to recovery
2: Install ROM
3: Reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel source
Download:
ROM ROM file
Changelog: Device changelog
Known issues:
None
Visit official website @ crDroid.net
crDroid X00QD Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate crDroid team
DON'T FORGET TO FLASH CUSTOM FIRMWARE TO MAKE WIFI AND FINGERPRINT SENSOR WORKING
Maintainer: MLZ94
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.x
ROM Firmware Required: Android 10 Beta or Custom Firmware
Based On: LineageOS
Hotspot tethering work with password? Can share some screenshot?
Got issues on my device:
1) Wi-Fi did not work
2) 4G is working
3) Both back cameras are not working
4) Frontal camera is working
5) Cannot place or receive calls (Carrier: Claro-BR)
6) Fingerprint sensor not working.
Any ideas?
ceacs said:
Got issues on my device:
1) Wi-Fi did not work
...
Any ideas?
Click to expand...
Click to collapse
Pls be sure you've done steps 9-12 as in the original post (patching vendor?), without doing them I had the same.
Where can I get stock android Pei? thank you.
I can confirm that the installation steps are correct, except maybe one more step between 4 and 5, press 'format data'.
Problems ROM:
Wi-fi not work and Fingerprint sensor not working.
I installed it and almost everything works fine, but Google sync doesn't work at all, I still can't identify the failure, I used different recovery, other than that everything works fine.
ceacs said:
Got issues on my device:
1) Wi-Fi did not work
2) 4G is working
3) Both back cameras are not working
4) Frontal camera is working
5) Cannot place or receive calls (Carrier: Claro-BR)
6) Fingerprint sensor not working.
Any ideas?
Click to expand...
Click to collapse
probably not installed Vendor custom, as said by the developer, if it's in Beta Android 10 it should also work fine.
jayarzeroseven said:
Where can I get stock android Pei? thank you.
Click to expand...
Click to collapse
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZE620KL/Q-P-UL-ASUS_X00QD-ASUS-16.0615.2002.120-1.1.33-user.zip
remember after installing reinstall custom recovery, otherwise it will return to stock recovery:
1- move the stock to ExtSdcard
2- enter on your custom recovery
3- install the zip
4- install Twrp or OrangeFox again
5- reboot to the recovery (if you press reboot system you have a high chance of losing recovery)
This might be due to the gapps you are using. Try with another gapps
MLZ94 said:
This might be due to the gapps you are using. Try with another gapps
Click to expand...
Click to collapse
unfortunately I've tested several, and they both have the same problem, the ones I've tested:
nikgapps
flamegapps
opengapps
Success flashing with weebgapps 11 but without magisk, error when flash magisk 24 zip. Thankyou @MLZ94
hotmatua.parulian said:
View attachment 5556125
Success flashing with weebgapps 11 but without magisk, error when flash magisk 24 zip. Thankyou @MLZ94
Click to expand...
Click to collapse
Hello, what is your error ?
Dear @MLZ94 the error is below, im using twrp 3.5.2-9-0
Installing zip file '/sdcard/Download/Magisk-24.1.zip'
Checking for Digest file...
Unmounting System...
Invalid zip file format!
Error installing zip file '/sdcard/Download/Magisk-24.1.zip'
And also audiofx blank when open, is it possible to uninstall it? Thank you
[Update] I think i already know the answer to magisk issue, just read the installation guide, i have to created patched_image from the boot_image, then flash the patched image
hotmatua.parulian said:
Dear @MLZ94 the error is below, im using twrp 3.5.2-9-0
Installing zip file '/sdcard/Download/Magisk-24.1.zip'
Checking for Digest file...
Unmounting System...
Invalid zip file format!
Error installing zip file '/sdcard/Download/Magisk-24.1.zip'
And also audiofx blank when open, is it possible to uninstall it? Thank you
[Update] I think i already know the answer to magisk issue, just read the installation guide, i have to created patched_image from the boot_image, then flash the patched image
Click to expand...
Click to collapse
Make sure the zip file is not corrupted. You might need to redownload it.
You can uninstall audiofx either by using a system app remover from play store (root required), or you can use adb with the following commande:
adb shell pm uninstall -k --user 0 org.lineageos.audiofx
MLZ94 said:
Make sure the zip file is not corrupted. You might need to redownload it.
You can uninstall audiofx either by using a system app remover from play store (root required), or you can use adb with the following commande:
adb shell pm uninstall -k --user 0 org.lineageos.audiofx
Click to expand...
Click to collapse
Noted and thanks
Mr @MLZ94 i have a problem, i always set wifi and mobile data on (as i always do in A9 stock), theres no problem if wifi is available, but if theres no wifi then the mobile data wont connect, in order to make mobile data works i have to on-off airplane mode first.
Is there any solution, or i have to activate only one connection?
And another problem, recently nothing happened no error message but the phone turned off by itself
hotmatua.parulian said:
Mr @MLZ94 i have a problem, i always set wifi and mobile data on (as i always do in A9 stock), theres no problem if wifi is available, but if theres no wifi then the mobile data wont connect, in order to make mobile data works i have to on-off airplane mode first.
Is there any solution, or i have to activate only one connection?
And another problem, recently nothing happened no error message but the phone turned off by itself
Click to expand...
Click to collapse
Well, this shouldn't happen, as it works fine for other users. I don't know what is your issue due to. I guess you already tried to reboot, but if you didn't, then try it. You can try to enable the option to keep mobile data on over wifi from developper settings.
Btw, has this issue just come or it was there since the first flash ?
I just checked, the mobile data over wifi setting is already active
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
crdroid_features/README.mkdn at 12.1 · crdroidandroid/crdroid_features
our main features (why you love us). Contribute to crdroidandroid/crdroid_features development by creating an account on GitHub.
github.com
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
flash crDroid recovery like every other recovery on this phone
Format data
Flash the ROM zip either from adb sideload or internal storage
Reboot in to recovery
Format data
Flash GApps (If wanted)
Reboot and enjoy!
Update installation:
Reboot to recovery
Flash the ROM in twrp or use adb sideload
Reboot and enjoy!
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_motorola_deen
Download:
ROM https://crdroid.net/deen
Changelog: https://crdroid.net/deen/8#changelog
Known issues:
- Dolby broken
- Adb sideload
- Ota Update
- You tell me
Visit official website @ crDroid.net
crDroid Deen Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs
20220810
- ADB: Wireless debugging: turns off frequently
- ADB: Wireless debugging: No debuggable process in Android Studio (but other devices works OK); App Inspection & Profiler not working
- ADB: Enable USB debugging -> device restarts (kernel panic?)
In the Logcat I got something like this:
Code:
I/adbd (533): opening control endpoint /dev/usb-ffs/adb/ep0
E/adbd (533): failed to write USB strings: No such device
20220807
- UPDATE: OTA: not working 20220807->20220810: Could not change profiles (https://paste.crdroid.net/J4u9b6). Is it a problem with permissions or problems caused by Magisk's changes into the system?
- UPDATE: sideload update 20220807->20220810 infinity boot loop with Magisk (without Magisk no problem)
- GAPPS: Device is not certified by Google (to solve this problem just follow: https://www.google.com/android/uncertified/)
But this ROM is still awesome! Thank you so much.
I'm trying to fix the root and debug issues
This looks awesome. I'm waiting for the new display to arrive and I'm rocking this phone back. Would this rom enable VoWifi? Or does it need certain hardware for vowifi?
Will come a Version in near future, that has no issues with OTA functionality?
Last 2 updates did not work with OTA. In Telegram Group Deen Brasil was mentioned, that a server is needed to make twpr download possible, before update is installed, cause there is no recovery patition.
Is there not way to add a recovery pation?
Hi their I was wondering when flashing this rom are these steps required? Like the pixel ROM for the Deen:
1. Download Rom
2. Download TWRP
3. fastboot getvar all
4. fastboot boot twrp
5. Do full wipe
6. Format Data
7. Flash ROM
8. Reboot to Bootloader
9. fastboot getvar all
10. If fastboot getvar all (current-slot label) from step 3 equals this from step 9 change the slot to opposite, if a then b if b then a, command is fastboot --set-active=SLOT
11. Boot to TWRP again
13. Flash Magisk (optional)
14. Reboot to system
I tried booting into recovery but i got this error
Edit : That was a long time ago.
tldr - im stupid and didnt unlock the bootloader properly.
Tobyash said:
I tried booting into recovery but i got this error View attachment 5744289
Click to expand...
Click to collapse
Looks like your bootloader is locked.
baseline2016 said:
Looks like your bootloader is locked.
Click to expand...
Click to collapse
Well thats what it seems at first look, but i have the bootloader unlocked. And i checked a few times to be sure.
Tobyash said:
Well thats what it seems at first look, but i have the bootloader unlocked. And i checked a few times to be sure.
Click to expand...
Click to collapse
Maybe you have to run the command in Windows as an administrator. And the command is fastboot boot recovery c:/....img
I followed the steps I mentioned in my post #6 and the ROM works excellent.
How do you update with twrp? It gives me error no matter what slot I choose. CrDroid recovery or OTA doesn't work.
there is a problem, the microphone is recording very low audios, with this crdroid rom.
Hello,
Gapps link is broken. I tried NikGapps but it stuck my boot...
Could you please fix the link?
Thanks in advance!
EDIT:
Found it here, just in case anyone is wondering:
Release Squeak Releases · ChonDoit/TheGappsInstaller
20220607 | Merged June changes | Unified some Overlays | Updated apns list
github.com
I just installed the latest update 2022-12-19 but unfortunately I hear an echo when I'm in a phone call.
Also echo when calling with Signal or Telegram.
Am I the only one?
whats-in-a-name said:
I just installed the latest update 2022-12-19 but unfortunately I hear an echo when I'm in a phone call.
Also echo when calling with Signal or Telegram.
Am I the only one?
Click to expand...
Click to collapse
Solved by installing stock and from there installing lineage-18.1-20220523-UNOFFICIAL-deen.zip
Hi. I'm trying to build a user version of your rom. The build works but I get an error during update (sideload). This happens at the end, after the vendor is flashed and during `Running backuptool scripts`
Code:
Update_engine_sideload [ERROR: postinstall_runner_action.cc] Failed to set backuptool context
I wonder why this could be ? Perhaps I have not reconstructed your manifest correctly?
note: I'm flashing from Recovery using a USB UTG stick and also flashing from TWRP using the same stick..
I have been using the Motorola One with this rom as my main phone for the past day or two, so far ive been enjoying it! Im hoping for more updates in the future.
Good afternoon,
I wanted to share with you my experience trying to install rom 20230414 for the Moto one tx 1941-3.
Although I was able to install and use the previous version without problems, it was impossible for me with this latest version since it stuck to the android logo. It doesn't flash or reset, it just stays there.
I find this system incredible so I would love to use the update
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
OOS 13.1 - 13.1.0.500(EX01) firmware is required (can update via firmware update tool found on download page, firmware button)
Download KIT files (download - this includes dtbo.img and vendor_boot.img)
Download recovery (from download page, recovery button)
Optional NikGapps core (download - note that you may also need setup wizard addon if you rely on Google restore)
Optional Magisk (boot.img used to patch with Magisk in order to get root, can be found in recovery folder from download page)
First time installation (clean flash):
Backup your data to PC, OTG flash drive
Make sure you have OOS 13.1 firmware installed (if used firmware flash tool from download page, proceed straight to install crDroid.zip)
Enter fastboot
Flash dtbo.img
Code:
fastboot flash dtbo dtbo.img
Flash vendor_boot.img
Code:
fastboot flash vendor_boot vendor_boot.img
Flash boot.img
Code:
fastboot flash boot boot.img
Boot to recovery (can do from bootloader or with buttons from power off state)
Now in recovery go to factory reset and confirm the reset
Reboot to recovery
Choose apply update and Apply from ADB
Now install crDroid zip via sideload
Code:
adb sideload crDroid.zip
Go back to main menu and reboot to recovery to install gapps (if you don't want gapps, reboot to system)
To install gapps, simply sideload gapps.zip the same way you installed crDroid.zip then reboot to system
Update installation:
Via recovery (recommended way):
Boot to recovery
Choose apply update and Apply from ADB
Now install crDroid zip via sideload and reboot
Code:
adb sideload crDroid.zip
If you had gapps, reboot to recovery and sideload gapps.zip and reboot
Via OTA:
Go to Settings -> System -> Updater and download latest build
Choose install and let it finish
If you have Magisk installed, don't click reboot when prompted and go to Magisk and choose install to inactive slot
Reboot
Note: In some cases where incompatible gapps used, may result in boot issues that should get fixed by flashing gapps again in recovery.
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8350
Download:
ROM: https://crdroid.net/lemonadep/9
Visit official website @ crDroid.net
crDroid OnePlus 9 Telegram
crDroid Community Telegram
If you like my work, consider a donation > My Paypal
Is this crdroid A13 ufs or erofs file system?
there a way to turn off the camera in status bar notifications? the option is grayed out compared to crdroid8. just dont like seeing the persistant cam icon in stats bar. other than that the ROM is solid! long awaited!
Any potential issues with using Omni, Stock, or one of the other Nikgapps releases instead of core?
Ldac stuttering anyone?
Any issues with live display color saturation resetting?
Then again, this whole thread is people asking questions and not getting answers. Everyone has left XDA for telegram
unable to connect to mobile data network... wifi works.
TheGhost1951 said:
Is this crdroid A13 ufs or erofs file system?
Click to expand...
Click to collapse
ufs
this.guy.lol said:
there a way to turn off the camera in status bar notifications? the option is grayed out compared to crdroid8. just dont like seeing the persistant cam icon in stats bar. other than that the ROM is solid! long awaited!
Click to expand...
Click to collapse
can dismiss the notification as soon camera closes
sumfahg said:
Any potential issues with using Omni, Stock, or one of the other Nikgapps releases instead of core?
Click to expand...
Click to collapse
Well fact is that I know have my own custom Nikgapps installment, but all should work as long as gapps package doesn't replace core system apps (Launcher is one good example)
Bepi Mosto said:
Ldac stuttering anyone?
Click to expand...
Click to collapse
I dk
Try and report
jamescable said:
Any issues with live display color saturation resetting?
Then again, this whole thread is people asking questions and not getting answers. Everyone has left XDA for telegram
Click to expand...
Click to collapse
well fact is I didn't check that one (and have not got the phone on me to test)
but do check and report if any issues
vnayrp said:
unable to connect to mobile data network... wifi works.
Click to expand...
Click to collapse
what carrier?
maybe update modem?
Currently found issues:
- Video playback in some apps (youtube, google photo's, instagram) require you to clear the apps from recents before video works.
- Phone crashes for some reason when locked, requires to force restart it (happens once every other day).
If there's a hotfix available, let me know.
gwolfu said:
what carrier?
maybe update modem?
Click to expand...
Click to collapse
Hi! Airtel is the Cellphone Carrier. It got connected after 15 mins after resetting the accesspoint settings multiple times and after restarting twice. Mobile Data would Switch on; but, once you exit that section and re-enter the mobile data settings area, the 'Mobile Data' switch seems to be reset to off mode.
File system ufs or erofs?
TheGhost1951 said:
File system ufs or erofs?
Click to expand...
Click to collapse
UFS
compatble with T-Mobile variant and T-Mobile carrier? LE2127...
Updated from 8.10. Everything works except for Gboad, It will simply not load at all on any app. Got a third party keyboard from the play store using voice command. Other than that, 5g was a little slow today, but that may be Tmobile.
Thanks for the Rom.
TheGhost1951 said:
compatble with T-Mobile variant and T-Mobile carrier? LE2127...
Click to expand...
Click to collapse
Yes, it is. I have same phone unlocked to Verizon. The only bug I noticed is, I have to set notification tone to mute otherwise when I receive a text the tone goes off constantly. The fix is to just change the messages app tone from default to whatever tone you want to use.
chefcesarpr said:
Updated from 8.10. Everything works except for Gboad, It will simply not load at all on any app. Got a third party keyboard from the play store using voice command. Other than that, 5g was a little slow today, but that may be Tmobile.
Thanks for the Rom.
Click to expand...
Click to collapse
You can use aosp keyboard if you want
jamescable said:
You can use aosp keyboard if you want
Click to expand...
Click to collapse
Its no ware to be found
chefcesarpr said:
Its no ware to be foundView attachment 5750251
Click to expand...
Click to collapse
I'll try later with a clean install. Thanks for the file but it did not worked.
when calls come in they do not show. how do i fix this? missed calls and would ring but not show...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A couple of days ago my mom gave me this phone. So, i want a new Android (and kick the s**t out all the bloatware of Samsung). After several tries, i make TrebleDroid vanilla works. And really good! Hell, even shows dual sims!
...And since there's no trace of someone doing this (or a guide), here are the steps. It was trial and error but i did it and it worked. (Sorry for english, i'm a native spanish speaker):
On original firmware:
- Activate OEM unlock in Developer Options
- Enable USB debugging
This is the version I used for Android 13 (at the moment, system-td-arm64-ab-vndklite-vanilla.img.xz from ci-20230510)
Releases · TrebleDroid/treble_experimentations
Scripts to automatically build/CI/Release TrebleDroid GSI - TrebleDroid/treble_experimentations
github.com
Vendor-Quack is required for SaR.
[SAR][Vendor][10][A530F/A530W/A730F] Vendor Quack V2.5 For Galaxy A8/A8+ 2018
Dude did you tried to enable magisk hide from settings? That should pass safety net on all Android 10+ roms :) Hey, i'm succesfully flashed magisk 21.1 beta version with safety net passed on Android R
forum.xda-developers.com
Vendor-Quack_V2.6
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
To load TWRP and change the system to Treble-compatible, instructions here. Download TWRP-jackpot2lte-Treble.img and TrebleCreator-A730F.zip
[GUIDE][TREBLE][A730F] Project Treble Guide for Galaxy A8+ 2018 (18/04/2019)
Project Treble Guide for Samsung Galaxy A8+ Just to make it clear I'm not responsible for whatever damage this could possibly cause to your device. Treble is everywhere, so why shouldn't we join it? I'm proud to announce that Galaxy A8+...
forum.xda-developers.com
ONCE TWRP IS LOADED, THE PHONE SHOULD NOT BE RESTARTED OR IT WILL BE OEM LOCK AND YOU WILL HAVE TO INSTALL THE ORIGINAL FW AND DO THE TRICK TO ELIMINATE THE KG-RMM STATUS:
[GUIDE][17.06.2019] RMM/KG bypass - Root/Install TWRP on Exynos Samsung after 2018
UPDATE 17.06.2019 - NEW RMM/KG bypass patch UPDATE 23.02.2019 - Pie and more Please take some time and read carefully the whole post. I am not and i won`t be responsable for anything. Disclaimer I am not responsible for bricked devices, dead...
forum.xda-developers.com
download patch:
https://forum.xda-developers.com/attachments/rmm_bypass_v3_corsicanu-zip.4778435/
YOU MUST LOAD THE PATCH.
In my case to not wait 7 days:
RMM a730f
I commented my experience on my a730f with bit 4, 1.- After flash rom, select a manual date 10 days before the current date. 2.- remove the automatic update option, and select manual download, then restart. 3.- Verify that the phone shows the...
forum.xda-developers.com
1.- After flashing OEM rom, select a manual date 10 days before the current date of the phone.
2.- remove the automatic update option, and select manual download, then restart. Check that developer options is disable.
3.- enter google and samsung account on the phone.
4.- wait 3 hours (in my case, less. 1 hour), enable developer options and there will be the OEM unlock enabled.
With ODIN load TWRP-jackpot2lte-Treble.img (it's version 3.2.3 - 3.3.0 didn't give me good results)
All of the following steps refer to TWRP:
- After installing TWRP without entering the rom, /data must be formatted. After that, reboot into recovery mode using the reboot menu. If /data is not formatted, the partitions will remain encrypted and the rest cannot be wiped.
-------------------------------------------------- -----------------------
From now on, every time you make a change, you must reboot, because without this step, loading anything via TWRP will fail (if you didn't reboot, the rom will not start or froze, or the zip will not load correctly, or you'll see partition access errors on the log). ALL STEPS MUST BE FOLLOWED OR THE SYSTEM WILL REMAIN ON THE ANDROID LOADING SCREEN FOREVER.
-------------------------------------------------- -----------------------
- After reboot, Wipe in /cache,/vendor (if it exists. Otherwise it will be created later),/system,/data,/dalvik. Reboot into recovery mode using the reboot menu.
- Load TrebleCreator-A730F.zip. It will create the partitions for treble. It has an automatic reboot. After the reboot it should show the script and then reboot again and go back to TWRP. If the automatic reboot does not happen and the script screen doesn't show up, you will have to start again from the /data format step. It is vital since the automatic reboot and script screen indicates that the partitions were all correctly loaded.
- Load RMM_Bypass_v3_corsicanu.zip. This is to bypass the OEM lock. It should be done before Vendor-Quack, as the vendor zip encrypts the /vendor partition and makes it inaccessible. Reboot into recovery mode using the reboot menu.
- Load Vendor-Quack_V2.6.zip. Reboot into recovery mode using the reboot menu.
- Finally, the .img of Android 13. One last reboot to recovery and THEN reboot to system.
After this the rom should start without problems. TWRP builds with treble are now LOCKED once booted. When trying to enter recovery, they get frozen at the TWRP boot screen. In order to load gapps, you must load the "latest" version of TWRP (in quotes because TWRP version 3.7.0 does not load since it is larger than the /boot partition. In this case, you must load 3.6.2 ) using Odin and Download mode.
Download TWRP for jackpot2lte
Download TWRP Open Recovery for jackpot2lte
dl.twrp.me
Once the latest version of TWRP is loaded, the zips can be loaded without problems. IN THIS VERSION OF TWRP IT IS SUGGESTED NOT TO MAKE ANY CHANGES. ZIP INSTALLATION ONLY. Surely something will ruin this version of twrp if something is done with it since it does not show the /vendor partition.
Gapps that works: NikGapps. That's it
Go! Get crazy and share the results!
THINGS THAT DONT WORK SO FAR:
- Lantern (with the system doesn't work. If u use flash on camera, WORKS)
- Brightness is very picky. (on settings you'll find "Phh Treble Settings". There are some extra functions disabled -- by default? -- go check and see whats best for u. BUT! Careful, Icarus. Don't mess with stuff u dont know.)
- i don't have a SIM at the moment, so i can't tell if phone works.
- Root? Don't need it. Don't know if it's working.
THANKS TO:
@phhusson for TrebleDroid and Exynos updates, and aaaall his long work!
@prashantp01 for Vendor_Quack, Treble, and the patched TWRPs for this phone.
@corsicanu and all the people behind the KG bypass patch.
@juankp9086 for the guide to reset KG status.
aaand finally the team behind TWRP.
Is this a GSI? If not, you MUST provide the source you used for your kernel, as required by the GPL Policy.
Further, did you base this on someone else's work? You MUST give credit where due, per the Forum Rules.
V0latyle said:
Is this a GSI? If not, you MUST provide the source you used for your kernel, as required by the GPL Policy.
Click to expand...
Click to collapse
Yes. It's a GSI from @phhusson. All vanilla, no modification whatsoever. Kernel is included on Vendor_Quack, a SaR posted here too, from @prashantp01 . All is based on guides and files from this same forum (and all files and sources are linked here), except the steps.
V0latyle said:
Further, did you base this on someone else's work? You MUST give credit where due, per the Forum Rules.
Click to expand...
Click to collapse
No problem. I'll quote everyone involved for making this Done
As for the steps, as i said, it was trial and error. There was no guides or something that i know of (FOR ANDROID 13). I just take a leap of faith based on last good know version working (Android 11) and use that, since Android 12 was no good in some details.
BernoO said:
Yes. It's a GSI from @phhusson. All vanilla, no modification whatsoever. Kernel is included on Vendor_Quack, a SaR posted here too, from @prashantp01 . All is based on guides and files from this same forum (and all files and sources are linked here), except the steps.
Click to expand...
Click to collapse
A GSI does not include a kernel, but since you linked to an established project that already has a published source, everything is good.
Thank you for adding credits.
I don't know if you saw this, but the Magisk installation instructions include details on how to defeat KG/Vaultkeeper.
Did Android 13 worked for you , and did you try setting lock as that seems to cause a bootloop .
If it worked can you tell me how you did it as my phone's seems to bootloop after trying to set a lock (pin,etc) on Android 12 and 13 and I have already tried PixelExperience and LineageOs .
NVM wrong topic
AlphaMaster08 said:
Did Android 13 worked for you , and did you try setting lock as that seems to cause a bootloop .
If it worked can you tell me how you did it as my phone's seems to bootloop after trying to set a lock (pin,etc) on Android 12 and 13 and I have already tried PixelExperience and LineageOs .
Click to expand...
Click to collapse
Can confirm. Since i was just testing, didnt need to lock it. After trying to set a pattern or pin lock (and systemUI crashes), ive reboot and then a soft bootloop (for 3 seconds i can see lock screen, then android boot screen, 3 sec lock screen and so...).
After another reboot, bootloop.
I dont have this issue since lock screen was just sliding.
Another issue: bluetooth is working, but when wireless speakers are on sync, no sound whatsoever. A common fault on several android 13 installations as i can tell.
Remember that @phhusson is adding exynos updates on TrebleDroid, so we should expect (or beg, cant tell ) that more fixes are on the way?
And BTW if Someone needs it the best Roms/GSI for A8+ are TreeUi(S20 Port) , PixelExperience (11) and FusionX(10,maybe) and Don't try Android 12 /13Gsi as they don't work currently.
AlphaMaster08 said:
And BTW if Someone needs it the best Roms/GSI for A8+ are TreeUi(S20 Port) , PixelExperience (11) and FusionX(10,maybe) and Don't try Android 12 /13Gsi as they don't work currently.
Click to expand...
Click to collapse
Thanks!
This guide most of all was because a couple of users were asking if there's a way to run Android 13 on their A8s. So there's an answer for that now. Almost.