Related
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
Try an other usb port on your computer.
And yes, offical rom restore everything (ipl,spl,radio,os)
I have already tried that.
The only thing that i can remember that i didn't tried, is connect in a different computer, but i will try that as soon as i get home.
thanks
try another ROM. got that activesync issue also with every Mary ROM.
You can find it in UDK rom thread
Active Sync Error 608
Try this to solve the problem:
Quote:
Originally Posted by nanni100
I solved cause my Windows Firewall was damaged and not customizable, then i found a reg file to solve this problem, installed on pc and reboot. On startup i saw the window of Win Firewall who asked me to unlock Activesync i said yes and turn off the firewall
I have a ethernet router with DHCP enabled
Then i configured the phone:
-Enabled Advanced Netword Function
-Go on Setup, Wi-Fi, Network, Remote HOST- NDIS
-Select the Specific IP Address like this:
IP Add: 169.254.2.1
Sub Mask: 255.255.0.0
Gateway: 169.254.2.2
and on the other page put only on the first DNS: 169.254.2.1
on the pc lan connection i leave the dhcp enabled "Obtain IP Address from serv" also for DNS (obviously cause i have the DHCP enabled on my router)
And MAGICLY all start works FINE!!!
After hours and hours spent on configurations, the problem was "simply" the windows firewall, but also the configuration of Remote Host-NDIS is important
Hope that can be useful for other
Right now i don´t have the MARY rom but the TUGA V3 ROM and problem continues. I have already tried to setup Remote HOST- NDIS like that and it didn´t work too.
Anyway thanks for all your help.
Thanks
Use the SD Card Method...
I use the SD Card Method. MUST BE FORMATTED AS FAT32 first. (As per willowxda's post. Thanx Willowxda)
Copy SSPL_TRIN.exe to your SD card's Root folder. (Included in ZIP File)
Rename the RUU_signed.nbh file in your OEM Rom to TRINIMG.nbh
Copy TRINIMG.nbh to your SD card's Root folder.
Run SSPL_TRIN.exe from your device.
Allow it to Flash and Restart as needed.
Works like a charm...
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
it is very simple but it took me too long time to figure out.
My PC hangs several times, I thought it is related to DMA or to IRQ interrupt requests for the microproccessor, but failed to solve it. This problem never happened to me while I was having the Qtek ppc, and even when I used the official HTC ROM when I bought this TrinTy. Then I started to check everything related to USB connection till I catch it. it is very silly, just to clear one checkbox.
Here what worked for me:
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality.
I believe it should work for you.
Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality
Click to expand...
Click to collapse
That was the first things that i tried to do, but with no luck.
Yesterday, i did what nightfear suggested and it worked fine.
As soon as i restored the official rom, AS started to work like a charm.
That is a strange issue, but for now it's resolved.
Lets see if the problem doesn't come back when i put WM6 on it again.
Thank you all for your help.
Mini SD card must be formatted in FAT32 for flash update to work
I have been trying to upgrade flash via SDCard but it did not work no matter how hard I tried (switch btw hardspls).
Then I realised that I have to format the SDCard to FAT32 so that the Hard SPL can recognise the card in bootloader prompt.
I am using Hard SPL 1.30
Hallo,
I'm new in the forum, i was advised to register here in order to try and find solution to a problem my ks20 has after flashing a rom.
I tried today for the first time to flash a rom in my new ks20(i bought it yesterday used with cooked rom on), i followed this guide http://forum.xda-developers.com/showthread.php?t=369481.
When my phone tried to open, after flashing, this message came up "illegal use unavailable OTP Block".So i flashed another rom in order for the phone to open. With the new rom it opened but it had lost IMEI number and cannot connect with any phone network.
I have made a nv backup with LGMDP but when i try to use LGMDP to restore it i have the same message as before "illegal use unavailable OTP Block" when the phone turns on.
I tried with different roms branded and unbranded. I also tried this http://www.myphone.gr/forum/showthread.php?t=181820&page=360
I dont know what went wrong, nv backup procedure was complete, why do you think that nv backup is not good? I am ready to through the phone away
Maybe you can provide me a solution or another nv backup with my imei ( as i read somewhere in here) if the one i have made is not good.
Thanks , waiting for your help.
LGMDP_EURO that i used to change the rom created two folders: one is called NvBackup and the other folder is named with my imei number, i used both .nv2 files that are included is these folders but every time the result after restoring was the message "illegal use unavailable OTP Block".
I don't know what to do!
Please if anybody has a clue
what rom did you last install?
Was it the branded or unbranded version?
The last rom was Greece Vodafone 10g it is branded.
The problem when i tried to install a cooked rom which i think it awas also branded.
My phone is vodafone branded
did you restore your nv2 in emergency mode?
no i installed a new rom (so that the phone could turn on ok even with wrong imei) and i tried to restore with the phone turned on
shut down your phone, start emercency mode(press : "Send" "Browser" "Power") a green led will shine on your mobile and connect it, and try to restore your back up nv2
how can i do that from emergency mode? i don't have "nv Default" option, also there is no "reset database & contents"
if you have msn send me your email adres in a private message.
Unfortunatelly i dont have msn but i have facebook account.If you have one we can talk from there
sure is the same
I have sent you my account by pm
rickou26 saved the day.
Thank you very much
pagia said:
rickou26 saved the day.
Thank you very much
Click to expand...
Click to collapse
Hi pagia,
I have completely the same story as you.
Could you please share how did you solve it ?
Thanx
Switchke said:
if you have msn send me your email adres in a private message.
Click to expand...
Click to collapse
Hi Switchke,
I completely have the same story as pagia, could you please help me ?
I do not have msn but a pm could I send my pm ?
Thank you in advance.
zezika said:
Hi pagia,
I have completely the same story as you.
Could you please share how did you solve it ?
Thanx
Click to expand...
Click to collapse
Did you solve your problem?
If not give rickou26 your imei number and ask him to make you a backup nv2 file.
use the program MTTY because it's only USB or has unlock without backup (like me) and has still bluetooth activated car solve the imei and bd address problem with that (should be works with usb cable also) :
1) get the phone recognized by windows and activate modem serial port interface
bluetooth perifs-> properties -> services -> check the 2 boxs
3) start -> programs -> accesories -> communication -> hyperterminal ->
set a name and modem port (should be found in step 1)
'call' (yellow phone)
4) type "AT" (without quotes) should see "OK"
5) type ATZ (activate echo)
6) AT%IDDE to unlock
7) AT%IMEI=X,X,X,X, ....
(15 chars) replace X by IMEI code or what you want
8) AT%BTAD=X,X,x,x,x,x ...
(12 chars from 0x0 ->0xF) same for bluetooth address, warning : the digits are in little endian (inversed)
9) switch off and on and the bluetooth should work again without asking for BD address
this method has worked for a KU380 only by bluetooth without install third party program to backup or repair and should works for other phones
help this dummy out ...
i met with the similar issue....
flashed my ks20 to upgrade to win 6.1
lost IMEI, bluetooth ID,...
QPST recognises the fone in 'download mode'...
so what can i do to recover my fone?
hi
hi all, i have just the same problem with ks20. I dont have imei and i do not backup the nv files. My phone is just a pda, no signal. On the back of the phone my imei is 357323-01-085909-3. Please help me, i have email [email protected]
Most old methods of changing the region on the samsung watches don't work anymore. Given their return policy I thought I bought expensive junk.
*#272*719434266344#
Click to expand...
Click to collapse
starts the csc selection but doesn't actually change the region.
TL;DR you need to install the combination firmware and edit two files
INFO: Netodin works fine in linux as well with wine since it works over the wifi
1. Start NetOdin3 click options and disable auto reboot
2. Click AP and select the combination firmware
3. Hold reboot button on the Samsung watch, when the reboot screen shows up press home multiple times to get into the boot menu
4. Jump to the Download (Wireless) and hold the boot button again to get into the Firmware download menu
5. Press the same button to more times to switch the watch to AP mode
6. Connect your wifi to the watch SM-R830-someid
7. In NetOdin3 press Start to flash the combination firmware
8. Click reset and now press CSC button
9. Select the CSC md5 and press start
10. When you reboot the device hold the boot button again until you enter the boot menu again
11. Select recovery and let the device restart
12. Enter settings -> About watch -> Software -> Tap software version until debug mode starts (you may need to restart your watch)
13. Connect watch to wifi
14. sdb connect <watchip>
15. sdb root on
16. sdb shell
17. backup active-customer.info: sdb pull /csa/csc/csc-active-customer.inf
18. backup prodcode.dat: sdb pull /csa/imei/prodcode.dat
19. edit /csa/csc/csc-active-customer.inf and replace csc code (I used vim and the XAR for the US version, https://www.geeksforgeeks.org/vi-editor-unix/ )
20. edit /csa/imei/prodcode.dat and replace last three characters to csc code you want (don't enter the csc selection after this it will reset it to the factory region)
21. reboot the device into recovery (i used /usr/bin/csc-util --reboot customer_change but i'm not sure it's necessary)
22. run netodin again and select AP, BL and CSC to flash stock
23. enjoy samsung pay if you have a US credit card (seems like you no longer need to install samsung pay apks on non samsung phone it's part of the wearables app)
R830 combination firmware
https://www.file-upload.net/download-13751174/combination-R830XXU1ASI2.7z.html
R830 3 file firmware
https://www.file-upload.net/download-13751206/multi-3file-R830XXU1BSI9.7z.html
sha256 checksums:
e719a024540706c07ae956c2a737b43dcaefa2b3335b1118121b6ca8168089ab AP_R830XXU1BSI9_usr.tar.md5
d0be4fdd7f5abaa6a4520f487b85dec14f94dd9d14a239fde69f5281817f7d99 BL_R830XXU1BSI9_usr.tar.md5
8f28bee9aa56b5c8d2fb8fa7bf16ab5cf0c3bff5fc547e2ada18a90c161f61e5 COMBINATION-FT40_R830XXU1ASI2.tar.md5
efe5e799c95c70aa1de8cced5a544bc471b2b74f61a3babffa72a7e295804225 CSC_OXA_R830OXA1BSI9_usr.tar.md5
Click to expand...
Click to collapse
Thanks to @adfree for the links and purcival for the order of how to flash the combination firmware and stock after
[0] Netodin
[1] how to change region on samsung gear s3
[2] combination firmware for sm-r820 by @adfree
[3] sdb in tizen studio CLI tools section
Hi,
Can l use this method just for updating the firmware of my watch?l'm still on R830XXU1ASHF.. if yes should l follow all these steps??
Thanks
What csc your watch?
tb_ said:
What csc your watch?
Click to expand...
Click to collapse
Thank you for your reply,l bought my watch in UK.
According to the list the csc is BTU-UNITED KINGDOM.
A Beginner
Hi,
First of all I want to thank you guys for the grat work.
I want to say that I am actually a beginner or amature when it comes to what you are doing
The instructions are very clea. But I would really appreciate it if anybody describes what to do with more details, especially the codes of sdb. Just some more details
It would be great if you can upload a video "If possible"
1. What is the worst thing that might happen if I do something wrong? Can the watch be ruind? Can I fix it if it happens?
2. Where can I find the csc of my country "Sweden" I googled it and found like 5 or 6 different csc !! Is there any trusted source?
3. Is it appliable to R820??? the 44mm model? or do I need to do something different in my case??
Thanks in advance
Coming from the other thread to confirm this worked for me, thanks a ton! Didn't think it would be that simple with just editing two text files.. lol
For those who missed it(I did), some steps are missing where one has to repeatedly connect back to AP every time something has to be done in NetOdin.
Also if anyone is confused about the steps, it's pretty much the same process for all samsung watches so just search for it on youtube, it's there.
Out of curiosity, where did you get the firmware from?? @tb_
2avrmillion said:
Coming from the other thread to confirm this worked for me, thanks a ton! Didn't think it would be that simple with just editing two text files.. lol
For those who missed it(I did), some steps are missing where one has to repeatedly connect back to AP every time something has to be done in NetOdin.
Also if anyone is confused about the steps, it's pretty much the same process for all samsung watches so just search for it on youtube, it's there.
Out of curiosity, where did you get the firmware from?? @tb_
Click to expand...
Click to collapse
Hi ,
Thanks for your feedback,are the sdb thing code mandatory?on youtube they only add the 3 or 4 files on odin and just flash it...
Hey guys, firstly thankyou! This worked perfectly and now I'm able to use Samsung pay down in Australia! Only thing that I would add from the perspective of being a complete beginner to Odin, is how to save the files when you edit the CSC (press escape then type ":wq") it took me an extra 20 minutes to figure it out and I thought someone might find it useful
2avrmillion said:
Out of curiosity, where did you get the firmware from?? @tb_
Click to expand...
Click to collapse
Got it from a third party. I was worried that it was counterfeit so before installing it I went through the system files to see if it's really the right model. But I can of course not guarantee that it wasn't modified by a third party. But I kinda assume that samsung won't boot from any random image given that you can't downgrade Samsung and even their tizen to any version you want apparently.
dodo1515 said:
Thank you for your reply,l bought my watch in UK.
According to the list the csc is BTU-UNITED KINGDOM.
Click to expand...
Click to collapse
{tizen} % cat preconfig/BTU/preset/csc-preset.ini
[default]
keyboard_lang="en_GB"
keyboard_preinstalled_lang="1^en_GB#en_US#de_DE#fr_FR#it_IT#pl_PL^en_GB
Click to expand...
Click to collapse
The csc.img has BTU inside. But I can't guarantee you anything when I ran this with my zone set to XTC it was booting fine but I couldn't get my phone to connect / initialize the watch after the factory reset. But not sure if it was the app or because i didn't properly reset or if I maybe shouldn't have reset.
So I can tell you that it will boot without issues but whether it works no idea. Maybe someone else can comment on that.
Highpryority said:
Hey guys, firstly thankyou! This worked perfectly and now I'm able to use Samsung pay down in Australia! Only thing that I would add from the perspective of being a complete beginner to Odin, is how to save the files when you edit the CSC (press escape then type ":wq") it took me an extra 20 minutes to figure it out and I thought someone might find it useful
Click to expand...
Click to collapse
I think you are talking about steps 17 and 18. If so can you please till me a bit more detailed how to do these steps ! I mean Do we edit manually in the sdb?? or how are we editing? Why do we need to save the files after editing? there is nothing about saving files in the steps above!
Sorry if my questions are silly but I am a real beginner here!
tareqsy91 said:
1. What is the worst thing that might happen if I do something wrong? Can the watch be ruind? Can I fix it if it happens?
Click to expand...
Click to collapse
No one will give you guarantees on this because no one wants to blame if something goes wrong. But if you try absolutely under no circumstances interrupt the flashing process and absolutely don't use the wrong model ROM. Also to be safe don't try to flash a firmware that has a lower version than your current one.
tareqsy91 said:
2. Where can I find the csc of my country "Sweden" I googled it and found like 5 or 6 different csc !! Is there any trusted source?
Click to expand...
Click to collapse
csc usually depends on the vendor. So there are a bunch of sweden csc's . But you should be able to find your current csc in /cas/imei/prodcode.dat
a list is on droid views
tareqsy91 said:
3. Is it appliable to R820??? the 44mm model? or do I need to do something different in my case??
Click to expand...
Click to collapse
r820 is the 44mm bluetooth model.
825 and 835 are lte with one version being US and the other being global I believe.
tb_ said:
No one will give you guarantees on this because no one wants to blame if something goes wrong. But if you try absolutely under no circumstances interrupt the flashing process and absolutely don't use the wrong model ROM. Also to be safe don't try to flash a firmware that has a lower version than your current one.
r820 is the 44mm bluetooth model.
825 and 835 are lte with one version being US and the other being global I believe.
Click to expand...
Click to collapse
Lower frimware? I have Tizen version 4.0.0.7
1. Do you know if the availabe combination frimware for R820 is of a lower frimware??
2. Yes My R820 is the 44mm bluetooth. thats correct. I guess I should use R820 which you linked in your original post!
3. Can you please describe more about steps 17-18 I didn't really understand how to edit! It's my first time using this sdb thing
Thanks for your patience everybody answering or even reading my questions
I think I am the most commenting member on this topic.
I have read a lot and almost all the details in each shared link in this thread.
I am trying hard I swear. Lately after downloading the shared files in the links in the original post. I can't start the file "web-cli_Tizen_Studio_3.3_windows-64"
It is just flashing a cmd window and nothing happens after that!
What should I do in this case??
The other file in the link "web-ide_Tizen_Studio_3.3_windows-64" is telling I should have JDK software which I installed but It didn't help anyway!
tareqsy91 said:
I think I am the most commenting member on this topic.
I have read a lot and almost all the details in each shared link in this thread.
I am trying hard I swear. Lately after downloading the shared files in the links in the original post. I can't start the file "web-cli_Tizen_Studio_3.3_windows-64"
It is just flashing a cmd window and nothing happens after that!
What should I do in this case??
The other file in the link "web-ide_Tizen_Studio_3.3_windows-64" is telling I should have JDK software which I installed but It didn't help anyway!
Click to expand...
Click to collapse
Don't use that because I had the same issue in Windows 10. Go to https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330 and download SDBstarterKidv1.zip. Extract it and run ansicon.exe under data/tools folder. It will open a command prompt.
shinzomask said:
Don't use that because I had the same issue in Windows 10. Go to https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330 and download SDBstarterKidv1.zip. Extract it and run ansicon.exe under data/tools folder. It will open a command prompt.
Click to expand...
Click to collapse
Thanks for the advice
I haven't done Netodin steps yet.
I am trying now to just connect the watch to the computer through the wifi network.
I have debugging mode on in the watch but I still can not connect to the watch
It keeps telling me failed to connect
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
Is it normal I can't connect before doing the netodin steps??
tareqsy91 said:
Thanks for the advice
I haven't done Netodin steps yet.
I am trying now to just connect the watch to the computer through the wifi network.
I have debugging mode on in the watch but I still can not connect to the watch
It keeps telling me failed to connect
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
Is it normal I can't connect before doing the netodin steps??
Click to expand...
Click to collapse
Normally the watch comes up with a prompt to allow your pc to connect to your watch. Maybe you might have to restart your watch. I would try the netodin step first because it might be more straightforward to connect the combination firmware to the computer because I didn't get any prompt on that.
Also maybe check that your virus scanner/firewall isn't blocking access.
shinzomask said:
Normally the watch comes up with a prompt to allow your pc to connect to your watch. Maybe you might have to restart your watch. I would try the netodin step first because it might be more straightforward to connect the combination firmware to the computer because I didn't get any prompt on that.
Also maybe check that your virus scanner/firewall isn't blocking access.
Click to expand...
Click to collapse
I've tried to turn off my antivirus and firewall but still no connection.
The newer versions of sdb 4.1.8 is showing the following:
The version of SDB client (4.1.8) and server (2.2.60) are different.
This may cause version compatibility problems.
It is recommended to use SDB server 4.1.8. *
I've tried to turn off my antivirus and firewall but still no connection.
The newer versions of sdb 4.1.8 is showing the following:
The version of SDB client (4.1.8) and server (2.2.60) are different.
This may cause version compatibility problems.
It is recommended to use SDB server 4.1.8. *
Click to expand...
Click to collapse
1.
sdb.exe once started is Background process...
To close active sdb you can do this:
Code:
sdb kill-server
2.
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
Look into this old post...
Try to read:
Code:
Guidelines_on_Connecting_GearS2_device_using_WiFi.pdf
Guidelines_on_Connecting_GearS2_device_using_WiFi_151222.pdf
Ignore Gear S2 text... because this is same shhh... since years...
Mandatory is to find your correct IP.
Hint...
Maybe it helps to try different PCs or Notebooks... sometimes more luck on other device... but only with correct IP in Command...
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
Click to expand...
Click to collapse
If these digits are correct...
Command Line looks like this:
Code:
sdb connect 192.168.0.16
Not more not less... NO need to add something behind...
Best Regards
This is driving me crazy guys
Still cannot connect to the watch through wifi yet
I am getting this answer now
* server not running. starting it now on port 26099 *
* server started successfully *
connecting to 192.168.0.16:26101 ...
failed to connect to 192.168.0.16:26101
I am trying on both the older and the newer versions of sdb
Debugging mode is on in my watch
When writing same command again "sdb connect 192.168.0.16" I get weird figures or "error: target offline" in the newest version of sdb
I have even tried to create a private wifi from the computer I use and connect the watch to the same network but it didn't help either.
I am still only trying to connect the watch to the computer through sdb. I haven't done the odin steps yet. I am afraid doing odin steps and not being able to complete the sdb connecty steps !!
I have another question:
Where I live in Sweden. Samsung didn't release a bluetooth version at all. That's why I bought mine from Germany.
If I change my csc to Sweden. Will it work as there is actually no swedish bluetooth SM-R820 !! I mean that mine watch will be probably the only bluetooth r820 with swedish csc !!!! will I get updates as usual? will the watch even work?
@tareqsy91
1.
You have nobody who can help you?
No family... no friends nor neighbar with second/other PC... Notebook?
I am using different PCs with:
Win XP
Win 7
Win 8
Win 8.1
Never tried with sh .tty Win 10...
1.1
Maybe give infos what you use... Windows Version AND 32 bit or 64 bit
2.
Sweden or Germany...
No matter...
F. device work with byteexact Values... Sales Code aka CSC...
2.
Their are few other methods to READ EXACT infos from device... instead talking about blabla Sweden or Germany...
Look at this post... with screenshots...
App which can read these 2 files from Watch:
https://forum.xda-developers.com/showpost.php?p=80072694&postcount=786
Code:
com.somyac.gear.transfer.lite
Best Regards
i was trying to change the region on my my sm r820 watch. i made connection with my watch and used netodin to add different software. during the transfer the connection failed and the message 'firmware upgrade encountered an issue 'was shown. on the screen. i try to reboot and choose download(wifi) again. when i connect to the phone i still cannot connect to netodin. how can i fix this?
In worst case only by USB cable...
https://forum.xda-developers.com/sm...axy-watch-active-2-44mm-sm-r820-odin-t4009587
But check this before:
https://forum.xda-developers.com/smartwatch/gear-s3/wireless-mode-enter-gear-s3-sm-r760-t3710855
Maybe by weired clicking around, you have luck...
Best Regards
Solved
Thankgod the issue has been Solved. I had the firewall disconnected for 15 minutes. Than i was able to connect to my watch via wifi and i could install de original software again.