Related
I am curious to know the difference between these two versions and what ROM to use for the SM-A520W...I am new to this and all the info would be appreciated
Dynamo22 said:
I am curious to know the difference between these two versions and what ROM to use for the SM-A520W...I am new to this and all the info would be appreciated
Click to expand...
Click to collapse
I believe A520W is a canadian variant.
Only difference I can find is the frequencies used for LTE (4G)
SM-A520W : 700, 750, 800, 850, 1700, 1800, 1900, 2100, 2600 MHz
SM-A520F : 700, 900, 1700, 1800, 2100 2300, 2500, 2600 MHz
Custom ROM
So then I can use a A520F custom ROM no problem? Having a hard time ensuring I use the correct custom ROM. Also sucks that there's no LineageOS for me yet...
Dynamo22 said:
So then I can use a A520F custom ROM no problem? Having a hard time ensuring I use the correct custom ROM. Also sucks that there's no LineageOS for me yet...
Click to expand...
Click to collapse
Yes, I think so. At least you could try since modem part is not included in twrp flashable roms. Only system and kernel.
Just make sure you do a backup in recovery before flash so you can easily go back, in case of boot problems or bugs.
Thank you.
Okay. Thanks for the support. I will try that out
Hi did you end up trying it out?
Marshmallow vs Nougat
Decided I want to try out Nougat instead. Hopefully I am not disappointed.
Dynamo22 said:
Decided I want to try out Nougat instead. Hopefully I am not disappointed.
Click to expand...
Click to collapse
Hey Dynamo,
How did you get Nougat to install on your phone?
I tried through Odin but it wouldn't start (due to an error) because I'm trying to install an A520F firmware on a A520W device.
Thanks
1Nexus said:
Hey Dynamo,
How did you get Nougat to install on your phone?
I tried through Odin but it wouldn't start (due to an error) because I'm trying to install an A520F firmware on a A520W device.
Thanks
Click to expand...
Click to collapse
The modem is different, Odin won't let you flash it. Even if it did, your phone would either be bricked or unable to use mobile networks. To make custom roms compatible, it's probably enough to create a modem patch which you flash after the rom.
It's been awhile...
tys0n said:
Yes, I think so. At least you could try since modem part is not included in twrp flashable roms. Only system and kernel.
Just make sure you do a backup in recovery before flash so you can easily go back, in case of boot problems or bugs.
Click to expand...
Click to collapse
Kinda veered off doing other things in life. Decided to give some attention to my phone again. Currently I am rooted on the stock Marshmallow 6.0.1 Wondering if I should go with a custom ROM? Xposed Framework seems like a risky route to take...Just wondering the best way to get the most difference and reach the potential of my phone but it seems like resources are a little limited? But I could be wrong.
Well... I broke my new Galaxy A5 2017 phone (3 weeks used),the digit amoled screen is kaput ! but phone still working. .... (keep calm)
Trying to replace the digit screen ... sellers want to sell the SM-A520W only witch is the phone model screen , but all other digit screen for A5 Galaxy like SM-520F , SM-520S or SM-520D ... etc , are much cheaper and looks like to be the same ... ("W" is for .... What? ... I'am canadian ...so What ? )
No idea why that specific canadian 2017 Samsung A5 Galaxy stupid fu ... ing screen would be different than others ? no mater the frequencies used on carrier , it should not affect the digit screen ... as I know ... Am I right ?
( I know we are not Trump's fans here in Canada !!! could it be the reason ? ahahaha ! )
has anyone actually flashed a a520F firmwire on a520W?
aren't they the exact same phone?
If anybody has please let me know. i am running Nougat, I would love to try lineage os. I started out with the htc dream (Canadian Variant) known as the G1 running Cyanogen Rom back in the day. This is the first time i cant seem to install Lineage OS. I have an A520W Canadian Variant
burnt_31 said:
If anybody has please let me know. i am running Nougat, I would love to try lineage os. I started out with the htc dream (Canadian Variant) known as the G1 running Cyanogen Rom back in the day. This is the first time i cant seem to install Lineage OS. I have an A520W Canadian Variant
Click to expand...
Click to collapse
Well try it yourself and report back. You've got nothing to lose I promise. You can easily go back to stock.
cyranoff said:
("W" is for .... What? ... I'm Canadian ...so What ? ). No idea why that specific Canadian 2017 Samsung A5 Galaxy stupid fu ... ing screen would be different than others ? no mater the frequencies used on carrier , it should not affect the digit screen ... as I know ... Am I right ?
Click to expand...
Click to collapse
The language police require consumer labeling and docs be bi-lingual (English & French); thus, the digitizer screen type "W" is bilingual, err, at least the stickers on the boxes and docs are.
/S
---------- Post added at 06:25 PM ---------- Previous post was at 06:17 PM ----------
supertac said:
has anyone actually flashed a a520F firmware on a520W (2017)?
Aren't they the exact same phone?
Click to expand...
Click to collapse
Hello everybody, I too have the same question. New A5 SM520W (2017) owner. Out of the box this week, it is android 7.0 and samy experience 8.1. Security, build dates, were 2018-JAN. It immediately took one OTA, resulting in security bumping to 2018-MAR-01 and baseband bumped to "C1" from "B2".
I'd like to get to lineage OS 15.1 sooner vs. later.
TWRP has recovery ROM for "Samsung Galaxy A5 2016 (Exynos)." Does this work with/on A520W 2017?
Cheers to all,
/S
Dynamo22 said:
So then I can use a A520F custom ROM no problem? Having a hard time ensuring I use the correct custom ROM. Also sucks that there's no LineageOS for me yet...
Click to expand...
Click to collapse
I have been running lineage OS 14.1 20180418 image on my SM-A520W for one week with great success. The hard part was finding a working TWRP for the A5 2017 and then getting that twrp.img to stay installed and not be over-written.
If you line your trwp ducks up, then go for it!
\/S
s2scotty said:
I have been running lineage OS 14.1 20180418 image on my SM-A520W for one week with great success. The hard part was finding a working TWRP for the A5 2017 and then getting that twrp.img to stay installed and not be over-written.
If you line your trwp ducks up, then go for it!
\/S
Click to expand...
Click to collapse
I switched from Stockrom mini to LineageOS 14.1. Loving it so far! I really feel like Samsung's ROMs are heavy if that makes any sense. But hopefully Oreo (Hadesrom) will be a bit different.
how much would a screen for the SM- A520w cost?
Hello
First I'd like to apologize if I made thread at the wrong place
A few days ago I tried some custom ROM base on Pie like RR , Arrow, Liquid Remix, MIUI.eu, etc. (I can't remember exactly all of them.)
And then I went back to Oreo stock ROM. But so weird the SIM card now swap from original. (SIM 1 become SIM 2 & SIM 2 become SIM 1.)
I already tried many ways but still no luck until now. (Flash Pie again & downgrade to oreo.)
This also happened to my Mi A2 Lite before & already solved by replace modem.img file in Oreo with same file from Pie when flashing.
Unfortunatelly the method from Mi A2 Lite can't be applied here cause sakura doesn't have modem.img file.
Would be very appreciate If anyone know how to solve this & willing to share here.
Thanks a lot
velfere said:
Hello
First I'd like to apologize if I made thread at the wrong place
A few days ago I tried some custom ROM base on Pie like RR , Arrow, Liquid Remix, MIUI.eu, etc. (I can't remember exactly all of them.)
And then I went back to Oreo stock ROM. But so weird the SIM card now swap from original. (SIM 1 become SIM 2 & SIM 2 become SIM 1.)
I already tried many ways but still no luck until now. (Flash Pie again & downgrade to oreo.)
This also happened to my Mi A2 Lite before & already solved by replace modem.img file in Oreo with same file from Pie when flashing.
Unfortunatelly the method from Mi A2 Lite can't be applied here cause sakura doesn't have modem.img file.
Would be very appreciate If anyone know how to solve this & willing to share here.
Thanks a lot
Click to expand...
Click to collapse
You have flashed Pie version eu.
That problem wont happen with AOSP based roms like RR, LOS, Viper etc.
Many people lost their VoLTE also. As of now there is no solution(As far as i know). You have to stick with Pie build itself. If you fixed it, let us know.
StanLeY Sd said:
You have flashed Pie version eu.
That problem wont happen with AOSP based roms like RR, LOS, Viper etc.
Many people lost their VoLTE also. As of now there is no solution(As far as i know). You have to stick with Pie build itself. If you fixed it, let us know.
Click to expand...
Click to collapse
Even if I flash back again to Pie (MIUI.eu, RR, LOS, also Mi-globe, etc) the problem still exist.
I have tried with other SIM card as well. But nothing fix.
So I guess must wait for next update to get fix. Thanks for the answer.
velfere said:
Even if I flash back again to Pie (MIUI.eu, RR, LOS, also Mi-globe, etc) the problem still exist.
I have tried with other SIM card as well. But nothing fix.
So I guess must wait for next update to get fix. Thanks for the answer.
Click to expand...
Click to collapse
I'm also facing this problem and also my 4G is not working. Only 3G in both slot.
I need fix for this
imzihad said:
I'm also facing this problem and also my 4G is not working. Only 3G in both slot.
I need fix for this
Click to expand...
Click to collapse
Try RR Pie. 4G working good in both slot. But the SIM problem still exist.
Still waiting for fix
velfere said:
Try RR Pie. 4G working good in both slot. But the SIM problem still exist.
Still waiting for fix
Click to expand...
Click to collapse
I was planning to flash miui 9 to see if that solves this problem..
Any suggestions?
imzihad said:
I was planning to flash miui 9 to see if that solves this problem..
Any suggestions?
Click to expand...
Click to collapse
I'll still stick with android oreo 8.1 till now. If I flash miui android pie 9.0 (maybe u mean android 9 ? ) , I will activate ARB which I avoid it. So I can keep the getvar anti version null.
I already tried to flash the latest firmware from yshalsager but nothing has change. The problem is still exist.
You can try & let me know the result. Good luck.
imzihad said:
I was planning to flash miui 9 to see if that solves this problem..
Any suggestions?
Click to expand...
Click to collapse
So how is it going ? Is it successful ? If so then you can explain it to me pls
velfere said:
So how is it going ? Is it successful ? If so then you can explain it to me pls
Click to expand...
Click to collapse
Nope, don't flash miui9.
Instead,there is a file named "daisy_modemfix" in mi a2 lite forum.. flashing that via twrp fixed that problem ?
imzihad said:
Nope, don't flash miui9.
Instead,there is a file named "daisy_modemfix" in mi a2 lite forum.. flashing that via twrp fixed that problem
Click to expand...
Click to collapse
Edited :
It works. Thx.
velfere said:
Edited :
It works. Thx.
Click to expand...
Click to collapse
Glad to hear that bro ?
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
Click to expand...
Click to collapse
What's your phone's specifications?
Lanreallenjay said:
What's your phone's specifications?
Click to expand...
Click to collapse
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
Ask for help here
https://t.me/phhtreble/283195 <---
Read before any question ^^^
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
Click to expand...
Click to collapse
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
rupert3k said:
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
Click to expand...
Click to collapse
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
rupert3k said:
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
Click to expand...
Click to collapse
Have you tried formatting data with TWRP (to the part when it asks you to write "yes") then flash no-verity?
You should at least be able to flash TWRP. If you can't, just download the proper USB drivers for your device, it might be the culprit.
Cheers!
itShouldWork said:
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
Click to expand...
Click to collapse
Phh just hinted it's likely Pie vendor causing panics:
"First you need to flash stock rom. Then install magisk and then this gsi.
Though please note that on Pie vendor, S9 kernel panics and reboot every few minutes, so it is highly unusable."
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
I have tried Android 10 GSI , using latest Q update
ZoiraP said:
I have tried Android 10 GSI , using latest Q update
Click to expand...
Click to collapse
Is it usable? any random reboots/ annoying instability?
itShouldWork said:
Is it usable? any random reboots/ annoying instability?
Click to expand...
Click to collapse
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
ZoiraP said:
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
Click to expand...
Click to collapse
Camera quality might be fixed with Google cam, if you find a good port.
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
rupert3k said:
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
Click to expand...
Click to collapse
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
A\B
itShouldWork said:
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
Click to expand...
Click to collapse
No real experience but A\B devices have two slots ie double the partitions (OnePlus has 67) .
This allows updates to be installed while running from slot A while the updated system is copied to B.
Apparently Q requires A\B so now we're on Q may as well try that next time we're curious
Phh just released:
AOSP 10.0 v208
Fix suspend/dt2w for Samsung Q vendor
Fix backlight for Samsung Q vendor
Samsung Q's fine, love gestures but the bloat is killing me.
You can tell Q's going to be so much leaner without bixby & friends.
Glad we installed it to get compatible but I think now we probably stand a better chance with 10 GSI's, hopefully LOS17 & Pixel Experience get updated again soon.
Wondering whether to following the rooting instructions yet?
Phh did say "flash stock rom then magisk and then gsi"
https://forum.xda-developers.com/galaxy-s9/how-to/one-ui-2-beta-rooting-installing-twrp-t4012961
ZoiraP's wondering why we sooo slow lol!
Wow this looks good: https://forum.xda-developers.com/ga...-s9--s9-cross-device-development/rom-t4020939
For G975N there are 3 Android Q firmware versions released by samsung as BSKO, BSL7, and BTA4 from old to newest.
Only kernel source of BSKO is released currently (2020-03-01) which you can find here: https://opensource.samsung.com/uploadSearch?searchValue=g975n
This recovery image is built based on kernel BSKO (G975NKSU3BSKO) and it works with BTA4 firmware so it should work with all these 3 firmware versions.
Note: This image is not Magisk patched yet, if you need magisk to be installed in recovery partition you'd have to patch this image yourself first.
How to use it?
refer to:
https://forum.xda-developers.com/galaxy-s10/development/magisk-root-galaxy-s10-series-t3918699
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Kernel source: https://github.com/allofee/kernel_g975n
Download link:https://mega.nz/#!bYpjhTBY!GoF_5SFb6Kk58k9P1ZwWYUMX2sKaQy7BjwyDUpLN_5I
edited on 2020/Mar/01.
allofee said:
For G975N there are 3 Android Q firmware versions released by samsung as BSKO, BSL7, and BTA4 from old to newest.
Only kernel source of BSKO is released currently (2020-03-01) which you can find here: https://opensource.samsung.com/uploadSearch?searchValue=g975n
This recovery image is built based on kernel BSKO (G975NKSU3BSKO) and it works with BTA4 firmware so it should work with all these 3 firmware versions.
Note: This image is not Magisk patched yet, if you need magisk to be installed in recovery partition you'd have to patch this image yourself first.
How to use it?
refer to:
https://forum.xda-developers.com/galaxy-s10/development/magisk-root-galaxy-s10-series-t3918699
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Kernel source: https://github.com/allofee/kernel_g975n
Download link:https://mega.nz/#!bYpjhTBY!GoF_5SFb6Kk58k9P1ZwWYUMX2sKaQy7BjwyDUpLN_5I
edited on 2020/Mar/01.
Click to expand...
Click to collapse
The G97xF version works on G97xN too no need for this thread.
The ones meant for F/FD Variants work on N devices. The only differences are some radio bands and CSC. plus the N Variant being sold as a single sim only just like the F.
Thanks though
long time ago I tried the twrp but not working for my g975n, so I thought it's still not supported.
could you delete this post @admin? thanks.
Thanks for this amazing work !
Abaddon said:
The ones meant for F/FD Variants work on N devices. The only differences are some radio bands and CSC. plus the N Variant being sold as a single sim only just like the F.
Thanks though
Click to expand...
Click to collapse
Hello there!,
Does it mean that I can flash F variants rom on N device? like converting the korean to international?
Is it possible to just flash the F stock rom on my device?
Thanks,
m.orgilsaikhan said:
Hello there!,
Does it mean that I can flash F variants rom on N device? like converting the korean to international?
Is it possible to just flash the F stock rom on my device?
Thanks,
Click to expand...
Click to collapse
Via custom roms based on ONEUI with patched system and kernel. yes.
Via ODIN, you'd have to do some patching else it won't boot.
Can't exactly remember, but I had an N variant before.
Hi, i will probably upgrade to this phone and I was wondering if there are any custom roms or treble support for this device?
At the moment there aren't any custom recoveries for this device, as a result there are no custom ROMS available for flashing.
As for GSI's, if you have your bootloader unlocked you could use this GSI sideloader: github.com/VegaBobo/DSU-Sideloader
However, I am currently in the process of building a TWRP for this device, so perhaps custom ROM's will be available in the future...
If you do use the sideloader, i recommend: https://github.com/ponces/treble_build_pe/releases/tag/v412-plus and https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/ for the latest android 12l/12.1
TheYellowRay said:
At the moment there aren't any custom recoveries for this device, as a result there are no custom ROMS available for flashing.
As for GSI's, if you have your bootloader unlocked you could use this GSI sideloader: github.com/VegaBobo/DSU-Sideloader
However, I am currently in the process of building a TWRP for this device, so perhaps custom ROM's will be available in the future...
If you do use the sideloader, i recommend: https://github.com/ponces/treble_build_pe/releases/tag/v412-plus and https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/ for the latest android 12l/12.1
Click to expand...
Click to collapse
Thank you for the responce but to use gsi roms don't you need a vendor file to flash?
PATHJUK said:
Thank you for the responce but to use gsi roms don't you need a vendor file to flash?
Click to expand...
Click to collapse
I've flashed the pixel experience gsi ROM on a different device without the use of a vendor file
TheYellowRay said:
I've flashed the pixel experience gsi ROM on a different device without the use of a vendor file
Click to expand...
Click to collapse
hello, will it work on one ui4.1?
oli231 said:
hello, will it work on one ui4.1?
Click to expand...
Click to collapse
What do you mean?
TheYellowRay said:
What do you mean?
Click to expand...
Click to collapse
Exaclty How to Flash this
oli231 said:
Exaclty How to Flash this
Click to expand...
Click to collapse
You don't need to because it's already rolling out as a software update for this device
One UI 4.1 update rolling out to the Galaxy A52s 5G, Galaxy A71 5G, and Galaxy S20 FE 4G
Samsung is rolling out the stable One UI 4.1 update to the Galaxy A52s 5G, Galaxy A71 5G, and Galaxy S20 FE 4G.
www.xda-developers.com
TheYellowRay said:
At the moment there aren't any custom recoveries for this device, as a result there are no custom ROMS available for flashing.
As for GSI's, if you have your bootloader unlocked you could use this GSI sideloader: github.com/VegaBobo/DSU-Sideloader
However, I am currently in the process of building a TWRP for this device, so perhaps custom ROM's will be available in the future...
If you do use the sideloader, i recommend: https://github.com/ponces/treble_build_pe/releases/tag/v412-plus and https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/ for the latest android 12l/12.
Click to expand...
Click to collapse
Do you know when it would be ready?