Develop Bugs

GSI ROM Testing (8.1.0)

Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
EDIT: side note, apparently people on here are asking if this is for real or not lol. heres a screenshot in here https://imgur.com/a/depZugF
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to treble rom dev and have a go at it guys!
Edit: BIG THANKS TO JAX
download everything except hwota> https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
unlock bootloader
flash nougat compatable twrp (search the dev form)
thanks jax 5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
place all three filles in same folder on sdcard
download hurupdater (search the form)
place it in same folder as the file just mentioned
boot to twrp.
format system data cache
navigate to sdcard the update folder with all four files.
flash hurupdater.zip
press vol down
wait for completion
reboot system
wait 10 minutes
hold power till reboot
boot to recovery and it should be stock.
format data
reboot
should boot up and work flawlessly except for missing browser which can be downloaded :/
woot you are on emui 8 and your partition setup is now oreo
now turn phone off
hold vol down and plug into pc with fastboot tools
go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development
download a oreo rom A only (i used Resurrection Remix)
flash system with fastboot
reboot to recovery
format data
reboot
profit.
BONUS
go here after all said and done https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
make sure to thank KingOfMezi
download this https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
fastboot flash recovery_ramdisk RECOVERY-V2.img
boot to recovery and flash latest magisk for root goodies

Which emui 8 did you flash ? I have a usa Honor 6x and would like to do the same

pspgarret said:
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to trble rom dev and have a go at it guys!
Click to expand...
Click to collapse
is themes apps working for you? flashing emui 8 via huru will give incomplete flash.

This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.

How do you do it?, Where is the links of the files?

thanks for responses, i updated the op and hopefully that is a bit more informative.
let me know if it is confusing at all and ill try to fix it

Can i flash p gsi.? (havoc 2.0)
And.. Is volte working..?

If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf

jhorne917 said:
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
Click to expand...
Click to collapse
It's not a custom rom... It's gsi

anyone tested other gsi? i only tried open kirin roms

are you sure it didn't rebranded? at about information, it say bln-24 or bln-al20? it could brick the phone, I thinks is better using the emui 8 from india instead the china version

hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.

pspgarret said:
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
Click to expand...
Click to collapse
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?

Nollie8969 said:
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Click to expand...
Click to collapse
op states i upgraded to emui 8 using nothing but hurupdater script and update packages in 7.x twrp buddy
https://imgur.com/a/depZugF

That's great man, i need to backup a lot of stuff since last TWRP backup, but I'm definitely gonna do this. I own a BLN-L21, so i hope this'll works the same as on any other variant, and that would be the real gem in all of this. Thanks for sharing

galapagos said:
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
Click to expand...
Click to collapse
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?

You mean the guide: How to brick your phone ?

Nollie8969 said:
You mean the guide: How to brick your phone ?
Click to expand...
Click to collapse
That's helpful and informative.

johnnyrichter said:
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
Click to expand...
Click to collapse
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.

galapagos said:
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
Click to expand...
Click to collapse
During your testing, which ROM has been the most stable in terms of daily-driver use so far? Last year after getting this 6x I tried a few different ROMS, back before OpenKirin happened, and had nothing but problems with boot loops and etc so I went back to stock EMUI5. Few days ago I got B365 and then B376 via OTA after installing the Huawei software on my PC. This phone really makes me miss my S5 with LineageOS.

i need help!!!

Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.

You should use treble twrp to install rom

JR Bautista said:
You should use treble twrp to install rom
Click to expand...
Click to collapse
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily

MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
update your bootloader to oreo?

JR Bautista said:
update your bootloader to oreo?
Click to expand...
Click to collapse
Yes, 0xC182

MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto

TeamMex said:
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
Click to expand...
Click to collapse
Ok, thanks, friend, I'm going to try it like that

MirandaEduardo said:
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
Click to expand...
Click to collapse
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help

khanpatriot said:
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
Click to expand...
Click to collapse
Yes, this Is a link
https://drive.google.com/file/d/1W-DXW1qm0g6GaALjKuA1pvM-_RHqlZ4j/view

Thanks alot

Oooppss one more query does software channel matter? I'm currently running lineage os 14.1 and i can't find the exact software channel of my device I'm little confused is it retus retail or some other channel. Can u plz help?

[EOL] Project Treble for F8131/2 [Android 10]

Project Treble for F8131/2 [Android 10]​ReadMe
Hello, everyone, I'm Sjll. Tone family(Xperia msm8996 devices) will stay at kernel 4.9 for Android 10. Our treble support for Android 10 has been released. There are some differences between Treble Pie, you need to know that:
1. GSI should be A/B ARM64. NOT A only as Pie.
2. TWRP should use a new version for Android 10.
3. Never flash software binaries from SODP, it has been included in vendor.img
I am not responsible for bricked devices, dead SD cards
Required Files
Treble Files::
AndroidFileHost: Download Link
TWRP for Android 10.0::
Download Link
How to flash:
1. Download Treble Files and extract it.
2.
Code:
fastboot flash boot boot.img
fastboot flash oem vendor.img
fastboot flash system <Path of GSI.img>
3.Flash Twrp and other MODs.
4.Boot and enjoy
For F8132:
Flash a dual patch in twrp: You can download it from here.
For Devs:
See @local__hero's post: Link
Update and bugs:
V2.10:
Update to android-10.0.0-R31.
V1.96:
Update: Minimum brightness fixed.
V1.90:
Update: Rotation is fixed.
V1.86:
Update: Hotspot is fixed.
Bugs: Rotation is wrong.
V1.0:
Bugs: Hotspot is broken.
XDA:DevDB Information
Treble, ROM for the Sony Xperia X Performance
Source Codes
Link
Contributors
Sjll
ROM OS Version: 10.0
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Beta
Created 2020-01-25
Last Updated 2020-03-18

Reserved

Reserved

hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much

edy sunanto said:
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
Click to expand...
Click to collapse
Hello, I think you'd better ask the GSI devs for help.

ok ... thanks a lot ... very good project ... bluetooth can't be connected in my device

Finally new treble project.. Thanks sjll.. Very appreciate it!

hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..

Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..

Fhcker90 said:
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Click to expand...
Click to collapse
yes this treble project works well on havoc 3.1 expressluke .. i've tried it .. cooler and feels lighter ..
Thank's to sjll

Z3r0.v said:
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Click to expand...
Click to collapse
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673

Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
I trying lineage from you, trying havoc 3.1 expressluke and nothing
On lineage bootanimation dont start, on havoc problem with bootloop, idk how i cat solved this problem..

Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
f8132. The patch for dual sim does not work. in single SIM card mode - it doesn’t work with all operators, I live in Kazakhstan - the beeline and the asset work without problems, Altel and Body 2 do not work. Wi-Fi also turns off after 10 minutes of use. is there any way to solve the communication problem? I liked everything, but for work I need two sims - Beeline and Altel. And it’s not convenient to carry two phones with you.

DAC doesn't work

what is the difference between v1 and v2?

OTG does not work

Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.

atlantix1 said:
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
Click to expand...
Click to collapse
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?

Some random said:
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Click to expand...
Click to collapse
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.

atlantix1 said:
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
Click to expand...
Click to collapse
Hmmmmmmmm.
Sad
Sadly, thats all that comes to mind... What Rom Were you trying to install? (GSI)

Ramdisk FW for SHT-W09 9.1.0.335 (8.4" UK)

I don't know if anyone else uses this device anymore, but worth a shot! I've lost root on my UK MediaPad M5 SHT-W09 9.1.0.335 (C432E3R1P2).
I'm trying to get hold of the full FW download so that I can re-patch the ramdisk with Magisk. I can't find it anywhere, though, not even through Hawawei Firmare Finder - the latest SHT-W09 FW from there is 9.0.1.160, all later ones are SHT-LGRP2. Even then, the best matches for a FullOTA are 9.1.0.333 and 9.1.0.336 (only OTA for 335).
Is it "safe" to use the ramdisk image from what's on Firmware Finder? 333 or 336?
Or do I need to get hold of the 335 FullOTA for SHT-W09?
Thank you!

Needed too..

You can scan the huawei firmwares by yourself to get the exhaustive list. With something similar to :
Huawei firmware scanner
I ran a scan for you it should be finished in a few hours. You will be able to access it in the cameron.html link in this this thread (the data will auto-update once the server will be done) :
Huawei mediapad firmwares

emiliewgnr said:
You can scan the huawei firmwares by yourself to get the exhaustive list. With something similar to :
Huawei firmware scanner
I ran a scan for you it should be finished in a few hours. You will be able to access it in the cameron.html link in this this thread (the data will auto-update once the server will be done) :
Huawei mediapad firmwares
Click to expand...
Click to collapse
Amazing, thank you!

mroshaw said:
I don't know if anyone else uses this device anymore, but worth a shot! I've lost root on my UK MediaPad M5 SHT-W09 9.1.0.335 (C432E3R1P2).
I'm trying to get hold of the full FW download so that I can re-patch the ramdisk with Magisk. I can't find it anywhere, though, not even through Hawawei Firmare Finder - the latest SHT-W09 FW from there is 9.0.1.160, all later ones are SHT-LGRP2. Even then, the best matches for a FullOTA are 9.1.0.333 and 9.1.0.336 (only OTA for 335).
Is it "safe" to use the ramdisk image from what's on Firmware Finder? 333 or 336?
Or do I need to get hold of the 335 FullOTA for SHT-W09?
Thank you!
Click to expand...
Click to collapse
I see the FULL package for all of those versions via Firmware Finder. SHT-W09. Mind you, they changed the naming convention for this model's firmware.

sarichter said:
I see the FULL package for all of those versions via Firmware Finder. SHT-W09. Mind you, they changed the naming convention for this model's firmware.
Click to expand...
Click to collapse
Hi - Could you clarify this, please ?
I can see SHT-LGRP2-OVS and SHT-LGRP3-OVS versions of 9.1.0.335.
Are either/both of these compatible with SHT-W09 ?
Could you flash the full firmware rather than just the ramdisk ?
What about local variants (eg. C432 etc.) ?
Thank you.

emiliewgnr said:
You can scan the huawei firmwares by yourself to get the exhaustive list. With something similar to :
Huawei firmware scanner
Click to expand...
Click to collapse
mroshaw said:
Amazing, thank you!
Click to expand...
Click to collapse
Which firmware/ramdisk did you use ?
Thank you.

Just pick the SHT-LGRP2-OVS 9.1.0.335 (approved + full).
For magisk only flash the patched recovery_ramdisk (or stock to get back).
Also the system.img is useful to get back to stock from e.g. phhusson's GSIs Android 11 which is great BTW.

Stupid question, I lost root recently on my M5 and am trying to get it back. I have a US M5 so I'm still on Android 8.0.
When flashing the patched ramdisk image do you use the command "fastboot flash ramdisk Magisk_patched.img" or "Fastboot flash boot Magisk_patched.img".
Thanks,
Rick

emiliewgnr said:
Just pick the SHT-LGRP2-OVS 9.1.0.335 (approved + full).
For magisk only flash the patched recovery_ramdisk (or stock to get back).
Also the system.img is useful to get back to stock from e.g. phhusson's GSIs Android 11 which is great BTW.
Click to expand...
Click to collapse
oh cool, i was actually wondering if the M5 is still compatible with GSI roms so how is Android 10 and 11 GSI working on it? any experiences you can share would be great! my gf's M5 is currently on Android 9 GSI and its been running great.

jbmc83 said:
oh cool, i was actually wondering if the M5 is still compatible with GSI roms so how is Android 10 and 11 GSI working on it? any experiences you can share would be great! my gf's M5 is currently on Android 9 GSI and its been running great.
Click to expand...
Click to collapse
Both Android 10 and 11 GSIs work well for me. Some of the 11 ones are getting too large for the M5's system partition, although this can usually be overcome by deleting unneccessary VNDK files from the image.
See this comment by CAOS GSI developer eremitein.

yatsura2k said:
Both Android 10 and 11 GSIs work well for me. Some of the 11 ones are getting too large for the M5's system partition, although this can usually be overcome by deleting unneccessary VNDK files from the image.
See this comment by CAOS GSI developer eremitein.
Click to expand...
Click to collapse
very nice info, thx for that! encountered anything that isnt working on the M5 with 10 or 11?

jbmc83 said:
very nice info, thx for that! encountered anything that isnt working on the M5 with 10 or 11?
Click to expand...
Click to collapse
I use Android 10 (HavocOS 3.12) for daily use - everything works fine.
Magisk works and it passes SafetyNet with the 'Universal SafetyNet Fix' module.
I tried phhusson's Phh-Treble 11 for a couple of days and everything seemed OK, but I'm waiting for it to come out of 'pre-release' before moving off HavocOS 3.12; the latest 11-based builds of that are far too large, even after removing redundant VNDKs.
It is worth noting that I have a WiFi-only M5 (SHT-W09) and so can't comment on whether the telephony parts of Android 10 or 11 work correctly.

Android 12 Beta 5 GSI on Lenovo P2 ?

Did someone succeed in installing Android 12 Beta 5 GSI on his Lenovo P2 (Kuntao) ?
I was just curious to install it in order to test it and see what's new.
I tried every method I found but each time my phone goes into boot loop when rebooting after having flashed the GSI.

u using which vendor?

Astridxx said:
u using which vendor?
Click to expand...
Click to collapse
I tried with vendor installed (Android 11) :
coming from lineage-18.1-20210919-nightly-kuntao-signed.zip,
then the one coming from Havoc-OS-v4.8-20210821-kuntao-Unofficial.zip,
then the one coming from dotOS-R-v5.1.3-kuntao-UNOFFICIAL-20210825-0359.zip.
I think i must make a mistake somewhere.
I also tried installing an Android 11 GSI with the same result as for Android 12.
As the Lenovo P2 doesn't have a vbmeta partition I edited the boot.img in order to disable Android Verified Boot (AVB).

cocopipou said:
I tried with vendor installed (Android 11) :
coming from lineage-18.1-20210919-nightly-kuntao-signed.zip,
then the one coming from Havoc-OS-v4.8-20210821-kuntao-Unofficial.zip,
then the one coming from dotOS-R-v5.1.3-kuntao-UNOFFICIAL-20210825-0359.zip.
I think i must make a mistake somewhere.
I also tried installing an Android 11 GSI with the same result as for Android 12.
As the Lenovo P2 doesn't have a vbmeta partition I edited the boot.img in order to disable Android Verified Boot (AVB).
Click to expand...
Click to collapse
A11 or A10 vendor does not support treble
Try with this vendor: https://t.me/lenovodownloads/1026

Astridxx said:
A11 or A10 vendor does not support treble
Try with this vendor: https://t.me/lenovodownloads/1026
Click to expand...
Click to collapse
I tried yesterday by using your versions of vendor but I got same result : my phone refuses to boot.
I will then wait till the first GSI after the official release of Android 12 or till someone proposes a custom rom based on Android 12.

Bump!