Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
EDIT: side note, apparently people on here are asking if this is for real or not lol. heres a screenshot in here https://imgur.com/a/depZugF
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to treble rom dev and have a go at it guys!
Edit: BIG THANKS TO JAX
download everything except hwota> https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
unlock bootloader
flash nougat compatable twrp (search the dev form)
thanks jax 5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
place all three filles in same folder on sdcard
download hurupdater (search the form)
place it in same folder as the file just mentioned
boot to twrp.
format system data cache
navigate to sdcard the update folder with all four files.
flash hurupdater.zip
press vol down
wait for completion
reboot system
wait 10 minutes
hold power till reboot
boot to recovery and it should be stock.
format data
reboot
should boot up and work flawlessly except for missing browser which can be downloaded :/
woot you are on emui 8 and your partition setup is now oreo
now turn phone off
hold vol down and plug into pc with fastboot tools
go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development
download a oreo rom A only (i used Resurrection Remix)
flash system with fastboot
reboot to recovery
format data
reboot
profit.
BONUS
go here after all said and done https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
make sure to thank KingOfMezi
download this https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
fastboot flash recovery_ramdisk RECOVERY-V2.img
boot to recovery and flash latest magisk for root goodies
Which emui 8 did you flash ? I have a usa Honor 6x and would like to do the same
pspgarret said:
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to trble rom dev and have a go at it guys!
Click to expand...
Click to collapse
is themes apps working for you? flashing emui 8 via huru will give incomplete flash.
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
How do you do it?, Where is the links of the files?
thanks for responses, i updated the op and hopefully that is a bit more informative.
let me know if it is confusing at all and ill try to fix it
Can i flash p gsi.? (havoc 2.0)
And.. Is volte working..?
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
jhorne917 said:
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
Click to expand...
Click to collapse
It's not a custom rom... It's gsi
anyone tested other gsi? i only tried open kirin roms
are you sure it didn't rebranded? at about information, it say bln-24 or bln-al20? it could brick the phone, I thinks is better using the emui 8 from india instead the china version
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
pspgarret said:
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
Click to expand...
Click to collapse
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Nollie8969 said:
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Click to expand...
Click to collapse
op states i upgraded to emui 8 using nothing but hurupdater script and update packages in 7.x twrp buddy
https://imgur.com/a/depZugF
That's great man, i need to backup a lot of stuff since last TWRP backup, but I'm definitely gonna do this. I own a BLN-L21, so i hope this'll works the same as on any other variant, and that would be the real gem in all of this. Thanks for sharing
galapagos said:
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
Click to expand...
Click to collapse
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
You mean the guide: How to brick your phone ?
Nollie8969 said:
You mean the guide: How to brick your phone ?
Click to expand...
Click to collapse
That's helpful and informative.
johnnyrichter said:
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
Click to expand...
Click to collapse
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
galapagos said:
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
Click to expand...
Click to collapse
During your testing, which ROM has been the most stable in terms of daily-driver use so far? Last year after getting this 6x I tried a few different ROMS, back before OpenKirin happened, and had nothing but problems with boot loops and etc so I went back to stock EMUI5. Few days ago I got B365 and then B376 via OTA after installing the Huawei software on my PC. This phone really makes me miss my S5 with LineageOS.
Related
I am new to this device and I want to flash pixel experience rom,
Bootloader is not unlocked, I need step by step guide to flash pixel experience rom (if possible with links)
Dextor69 said:
I am new to this device and I want to flash pixel experience rom,
Bootloader is not unlocked, I need step by step guide to flash pixel experience rom (if possible with links)
Click to expand...
Click to collapse
I am trying to list the steps. I may have missed some, so wait for others to reply also.
Installing Chinese ZUI 3.5.xx and then OTA to latest build (for getting latest baseband)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/rom-zui-3-5-243st-z2-plus-z2-t3745636
Unlocking bootloader plus installing TWRP:- https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Treble ROM vs Non Treble ROM process (depending on ROM type you need to format your phone and TWRP selection)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2plus-treble-roms-flashing-reverting-t3778287
Pixel is a full treble ROM with latest release!!
Last, the easiest part, downloading the PE ROM flashing/installing via TWRP
NaXal said:
I am trying to list the steps. I may have missed some, so wait for others to reply also.
Installing Chinese ZUI 3.5.xx and then OTA to latest build (for getting latest baseband)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/rom-zui-3-5-243st-z2-plus-z2-t3745636
Unlocking bootloader plus installing TWRP:- https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Treble ROM vs Non Treble ROM process (depending on ROM type you need to format your phone and TWRP selection)
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2plus-treble-roms-flashing-reverting-t3778287
Pixel is a full treble ROM with latest release!!
Last, the easiest part, downloading the PE ROM flashing/installing via TWRP
Click to expand...
Click to collapse
Somehow i managed to flash jaguar rom,will soon flash pixel exp after update
TWRP for Huawei P10 Lite
Working
Code:
[CENTER]* Touchscreen
* Adb
* Backup
* Wipe
* File manager
* MTP
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
Installation
Code:
[CENTER]* put you phone in fastboot mode and type
"fastboot flash recovery_ramdisk <grab_here_the_img>"
* reboot
[/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Pie/TWRP/"]TWRP[/URL]
[/CENTER]
Credits:
@Pretoriano80
@haky 86
@OldDroid
@DarkDroidDev
Please support my work, it's very important! Thanks
DONATIONS
Regards !
Reserved
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Great .. after testing on WAS-LX1A
i dunno why you're telling that mtp/backups doesn't work !
For me Backups work and internal storage / SD shown on windows normally
*Edit
Can't copy files
Thanks for your precious work .
-CALIBAN666- said:
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Click to expand...
Click to collapse
I've installed RR and Bootleggers ROM's on P8 Lite 2017 and it works. All ROM's and Recoveries for hi6250 based devices (Kirin 655, 658, 659) will work on each other.
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
GizmoTheGreen said:
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
Click to expand...
Click to collapse
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
NeoPreacher said:
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
Click to expand...
Click to collapse
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
GizmoTheGreen said:
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
Click to expand...
Click to collapse
yeah, this is going to happen soon !
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
chiduja said:
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
Click to expand...
Click to collapse
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
NeoPreacher said:
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
Click to expand...
Click to collapse
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
chiduja said:
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
Click to expand...
Click to collapse
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
NeoPreacher said:
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
Click to expand...
Click to collapse
The first time that I tried to do the flashing I had to put my patron, but I've never did the decrypt, It's ****ty I tried a lot of "Solutions" but It doesn't worked.
ok alright the problembis that i tried to use "warsaw" codename instead of "hi6250" but it is not working for some reason, it is a flashing issue, and probably i have to revert my changes...
EDIT: before reverting my changes I wanted to try with LineageOS 16.0
Hi
Is there a prerequisite to use this recovery, I'm still using twrp 3.1.1-2 made by KingofMezi so still emui 5.0 but that recovery doesn't allow data backup because of the encryption. So I tried to flash yours it was ok in the command window but when I try to boot in recovery I get an error. I tried flashing again, downloading again and flashing but still doesn't work any idea?
I didn't want to upgrade the rom without a proper backup but none of the recoveries have been working.
Hi! Does someone try to install on a p20 lite?
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
diy_solomun said:
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
Click to expand...
Click to collapse
I asked myself the same question and tried to flash twrp on android 7.0 but it didn't work. I tried to upgrade to android 8 via erecovery but it failed. So i managed to upgrade it to B366 Emui 8 with dload (https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946) but i still could not flash twrp. So i entered erecovery mode again (press power, volume up & down for a few seconds) and with android 8 i could recover it to the official 8.0.0.376. After this step the flashing of twrp was finally successful. Thanks to darkjoker!!
New TWRP update is up !
Changelog
Code:
[CENTER]* Synced with latest TWRP source code
* FIxed flashing errors[/CENTER]
DONATIONS
Check OP for more info and download !
This is a custom recovery flashable pure stock firmware. It is based on the A.07 ozip which was released as RMX1901EX_11_OTA_0070_all_6m8Kht2yFPh5.ozip on official realme website. Until kernel source is completed, i'll keep working on it.
Prerequisites
Unlocked bootloader
Custom recovery installed (TWRP/PBRP/Orange Fox)
Recommended:
TWRP Here
PBRP : Here
Instructions
Dirty Flash:
1. Download
2. Reboot to recovery
3. Select install & choose the zip
4. Swipe to flash
5. Reboot
Clean Flash:
1. Download
2. Reboot to recovery
3. Wipe all (cache, dalvik-cache, system, data, internal storage)
4. Select install & choose the zip
5. Swipe to flash
6. Format data
7. Reboot
Recommended: Clean Flash
Features
For now, it's pure stock. Nothing fancy here.
Just a life saver for whom who messed with system/vendor and have no backup.
Bugs
Clean Flash:
1. Nothing, you tell me.
2. Didn't tested OTG, i don't have one.
Dirty Flash:
1. Maybe it is going to inherit the bugs you have currently, again maybe it could fix them (i.e i dirty flashed when the google/fb/twitter sign in are crashing with blank screen and it fixed that)
2. MTP didn't let linux to access the files though it was showing all.
3. You report me yours.
Stock Firmware Info
Build Number: RMX1901EX_11_A.07
Security Patch: August 5, 2019
To Do
1. remove bloatwares.
2. make it a very minimal zip.
3. another variant with pre root.
4. any other good things if i forgot to mention.
Note: I don't have broadband bandwidth to frequently update this. I'll update once it's debloated or on some major changes.
Screenshots
I forgot to take screenshots because i was recording. Again it's 2 GB of recording and compressing to upload to youtube tomorrow. Though i have some pictures from other device. You can find those in screenshots section.
Downloads
Google Drive
Support Development
If you are capable, you should support development. I have the device in hand, have a good pc only thing missing is the bandwidth. I use mobile internet & have to do recharge for every upload or download. If you are willing to support, below is my address.
Google Pay (UPI): [email protected]
See you in future update.
XDA:DevDB Information
Recovery Flashable Stock ROM For Realme X, ROM for the Realme X
Contributors
chankruze
Source Code: https://www.realme.com/in/support/software-update
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom Recovery
Based On: RMX1901EX_11_A.07
Version Information
Status: Stable
Current Stable Version: 0.0.2
Stable Release Date: 2019-09-29
Created 2019-09-28
Last Updated 2019-09-29
Can China variant flash this? Thx
is everything working fine? volte, camera, fingerprint?
At last have been asking Ajit for long time xD
nickyip123 said:
Can China variant flash this? Thx
Click to expand...
Click to collapse
Which firmware you use ?
If you use official firmware from here, then it should work.
vikasjangid said:
is everything working fine? volte, camera, fingerprint?
Click to expand...
Click to collapse
Yes, Camere (both front and back), fingerprint and VoLTE.
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
can i flash into my china realme x, i am running RMX1901CN_A17 version.
Its Just the same old color OS.
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
indroider said:
At last have been asking Ajit for long time xD
Click to expand...
Click to collapse
what?
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Does jio volte work on Indian variant?
ghostEye said:
Title is misleading in some sense. Arghhh i just wiped my phone and did all the steps just to find its just the stock color os.
Click to expand...
Click to collapse
The title says stock os ,
The features says stock os nothing fancy. You got exactly what is said. Nothing is misleading here.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
vikasjangid said:
Please share the YouTube video link if you have uploaded
is it color os or pure android like android one?
Click to expand...
Click to collapse
it is color os as described clearly.
indroider said:
About this flashable a07 zip .. Remember in group.. Raunaq ..?
@4j17h
I asked u about making this zip few weeks ago
Click to expand...
Click to collapse
ahha Raunaq yes, I remember you.
Can we flash it on oppo k3 ?
Oppo k3 have the same hardware as realme X just the camera is 16mp ( same sensor as realme 3 pro), so can we flash this rom and change the camera app ?
Hello, on chinese model I receive error 7 (error patching system image), can you help me?
Hey
I am new to this segment
Please explain, if I wipe my internal storage also, from where will I install the custom rom?
Isn't the custom rom should be kept in the internal storage before installing?
phone is stuck in bootloop.
my phone is stuck on realme logo and reboot to recovery what should i do now?i am not able to boot my phone even with other roms like aosp. please help!!
Please make it flashable in Chinese variant too.thanks in advance
How to root this rom? What magisk do you use?
djozgandoz said:
How to root this rom? What magisk do you use?
Click to expand...
Click to collapse
Note:- Rooting stock rom with magisk will only work in core only mode. Hence no modules are going to be loaded.
Both 19.4 & 20.0 working. Flash the zip from recovery mode.
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
Click to expand...
Click to collapse
What's your phone's specifications?
Lanreallenjay said:
What's your phone's specifications?
Click to expand...
Click to collapse
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
Ask for help here
https://t.me/phhtreble/283195 <---
Read before any question ^^^
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
Click to expand...
Click to collapse
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
rupert3k said:
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
Click to expand...
Click to collapse
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
rupert3k said:
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
Click to expand...
Click to collapse
Have you tried formatting data with TWRP (to the part when it asks you to write "yes") then flash no-verity?
You should at least be able to flash TWRP. If you can't, just download the proper USB drivers for your device, it might be the culprit.
Cheers!
itShouldWork said:
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
Click to expand...
Click to collapse
Phh just hinted it's likely Pie vendor causing panics:
"First you need to flash stock rom. Then install magisk and then this gsi.
Though please note that on Pie vendor, S9 kernel panics and reboot every few minutes, so it is highly unusable."
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
I have tried Android 10 GSI , using latest Q update
ZoiraP said:
I have tried Android 10 GSI , using latest Q update
Click to expand...
Click to collapse
Is it usable? any random reboots/ annoying instability?
itShouldWork said:
Is it usable? any random reboots/ annoying instability?
Click to expand...
Click to collapse
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
ZoiraP said:
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
Click to expand...
Click to collapse
Camera quality might be fixed with Google cam, if you find a good port.
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
rupert3k said:
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
Click to expand...
Click to collapse
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
A\B
itShouldWork said:
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
Click to expand...
Click to collapse
No real experience but A\B devices have two slots ie double the partitions (OnePlus has 67) .
This allows updates to be installed while running from slot A while the updated system is copied to B.
Apparently Q requires A\B so now we're on Q may as well try that next time we're curious
Phh just released:
AOSP 10.0 v208
Fix suspend/dt2w for Samsung Q vendor
Fix backlight for Samsung Q vendor
Samsung Q's fine, love gestures but the bloat is killing me.
You can tell Q's going to be so much leaner without bixby & friends.
Glad we installed it to get compatible but I think now we probably stand a better chance with 10 GSI's, hopefully LOS17 & Pixel Experience get updated again soon.
Wondering whether to following the rooting instructions yet?
Phh did say "flash stock rom then magisk and then gsi"
https://forum.xda-developers.com/galaxy-s9/how-to/one-ui-2-beta-rooting-installing-twrp-t4012961
ZoiraP's wondering why we sooo slow lol!
Wow this looks good: https://forum.xda-developers.com/ga...-s9--s9-cross-device-development/rom-t4020939
hello everyone,
I'm trying to install Evolution X (or any other custom rom) on my redmi note 9 pro (joyeuse global version, I'm sorry if I'm posting this here but I didn't find the Global version forum, just the indian one). Every rom i get seems to be miatoll, and of course if I install it from TWRP it just doesn't work. I couldn't even find it in the official evolution X website, I'm currently hopeless. Is there any joyeuse rom or maybe a way to install a miatoll rom and it working just fine? I would be extremely grateful for your support, thanls in advance.
Rose in Deeper.
DerpFest Some newbies working together to bring you a Custom ROM that incorporates the best features around and longs to support the community with its own unique features and contributions. Latest Stable: Android 13 Encryption: FBEv1 Download Recovery Support by @FireFly09
t.me
try this
crdroid 9.5 works fine for me on my joyeuse
Genny34 said:
Every rom i get seems to be miatoll, and of course if I install it from TWRP it just doesn't work.
Click to expand...
Click to collapse
miatoll is Curtana, Joyeuse, Excalibur and Gram. And maybe a few more I lost oversight tbh! If your device is actually a Joyeuse, miatoll roms should work.
I couldn't even find it in the official evolution X website
Click to expand...
Click to collapse
Because there is no official Evolution X rom for any of those devices, of course you won't find it on the official website.
So step by step: What exactly do you mean when you say "it just doesn't work"?
If I was in you place I'd just flash the latest official MIUI rom again, just to be sure everything is back to normal in case I screwed something up. Then, I'd just install LineageOS: Official support for joyeuse, one of the oldest and most stable custom roms there is.
To do so, first make 100% sure your device is a Joyeuse! There are so many Note 9 models and many wont work, so be sure you got it right.
Then, follow this guide to reinstall latest MIUI stock: Select "Fastboot update" on the left side, then just follow the steps. Make sure to select "flash all" later in the process(and not "flash all and lock" or "flash all except storage"), you don't want to lock your bootloader again. Needless to say all data on the phone will be deleted.
Then, just follow this guide to install LineageOS. Be sure to read it carefully and follow every step exactly as written down.
You should now have a working custom rom. Let me know if this helped or if you keep having issues!
M47Z said:
miatoll is Curtana, Joyeuse, Excalibur and Gram. And maybe a few more I lost oversight tbh! If your device is actually a Joyeuse, miatoll roms should work.
Because there is no official Evolution X rom for any of those devices, of course you won't find it on the official website.
So step by step: What exactly do you mean when you say "it just doesn't work"?
If I was in you place I'd just flash the latest official MIUI rom again, just to be sure everything is back to normal in case I screwed something up. Then, I'd just install LineageOS: Official support for joyeuse, one of the oldest and most stable custom roms there is.
To do so, first make 100% sure your device is a Joyeuse! There are so many Note 9 models and many wont work, so be sure you got it right.
Then, follow this guide to reinstall latest MIUI stock: Select "Fastboot update" on the left side, then just follow the steps. Make sure to select "flash all" later in the process(and not "flash all and lock" or "flash all except storage"), you don't want to lock your bootloader again. Needless to say all data on the phone will be deleted.
Then, just follow this guide to install LineageOS. Be sure to read it carefully and follow every step exactly as written down.
You should now have a working custom rom. Let me know if this helped or if you keep having issues!
Click to expand...
Click to collapse
thank you for your support. the problem was twrp: there is no twrp for miatoll, so that caused some problems when i wanted to flash any rom. I simply switched to orange fox and installed a custom evolution x which is working pretty fine. Thank you again!
Genny34 said:
hello everyone,
I'm trying to install Evolution X (or any other custom rom) on my redmi note 9 pro (joyeuse global version, I'm sorry if I'm posting this here but I didn't find the Global version forum, just the indian one). Every rom i get seems to be miatoll, and of course if I install it from TWRP it just doesn't work. I couldn't even find it in the official evolution X website, I'm currently hopeless. Is there any joyeuse rom or maybe a way to install a miatoll rom and it working just fine? I would be extremely grateful for your support, thanls in advance.
Click to expand...
Click to collapse
If your device is Curtana flash Latest Statix OS
Pixel experience user here, have been using it from past 1 year, never faced any issue.
LateN8Programmer said:
Pixel experience user here, have been using it from past 1 year, never faced any issue.
Click to expand...
Click to collapse
Try Statix os if your device is Curtana