TWRP for Huawei P10 Lite
Working
Code:
[CENTER]* Touchscreen
* Adb
* Backup
* Wipe
* File manager
* MTP
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
Installation
Code:
[CENTER]* put you phone in fastboot mode and type
"fastboot flash recovery_ramdisk <grab_here_the_img>"
* reboot
[/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Pie/TWRP/"]TWRP[/URL]
[/CENTER]
Credits:
@Pretoriano80
@haky 86
@OldDroid
@DarkDroidDev
Please support my work, it's very important! Thanks
DONATIONS
Regards !
Reserved
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Great .. after testing on WAS-LX1A
i dunno why you're telling that mtp/backups doesn't work !
For me Backups work and internal storage / SD shown on windows normally
*Edit
Can't copy files
Thanks for your precious work .
-CALIBAN666- said:
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Click to expand...
Click to collapse
I've installed RR and Bootleggers ROM's on P8 Lite 2017 and it works. All ROM's and Recoveries for hi6250 based devices (Kirin 655, 658, 659) will work on each other.
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
GizmoTheGreen said:
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
Click to expand...
Click to collapse
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
NeoPreacher said:
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
Click to expand...
Click to collapse
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
GizmoTheGreen said:
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
Click to expand...
Click to collapse
yeah, this is going to happen soon !
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
chiduja said:
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
Click to expand...
Click to collapse
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
NeoPreacher said:
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
Click to expand...
Click to collapse
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
chiduja said:
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
Click to expand...
Click to collapse
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
NeoPreacher said:
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
Click to expand...
Click to collapse
The first time that I tried to do the flashing I had to put my patron, but I've never did the decrypt, It's ****ty I tried a lot of "Solutions" but It doesn't worked.
ok alright the problembis that i tried to use "warsaw" codename instead of "hi6250" but it is not working for some reason, it is a flashing issue, and probably i have to revert my changes...
EDIT: before reverting my changes I wanted to try with LineageOS 16.0
Hi
Is there a prerequisite to use this recovery, I'm still using twrp 3.1.1-2 made by KingofMezi so still emui 5.0 but that recovery doesn't allow data backup because of the encryption. So I tried to flash yours it was ok in the command window but when I try to boot in recovery I get an error. I tried flashing again, downloading again and flashing but still doesn't work any idea?
I didn't want to upgrade the rom without a proper backup but none of the recoveries have been working.
Hi! Does someone try to install on a p20 lite?
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
diy_solomun said:
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
Click to expand...
Click to collapse
I asked myself the same question and tried to flash twrp on android 7.0 but it didn't work. I tried to upgrade to android 8 via erecovery but it failed. So i managed to upgrade it to B366 Emui 8 with dload (https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946) but i still could not flash twrp. So i entered erecovery mode again (press power, volume up & down for a few seconds) and with android 8 i could recover it to the official 8.0.0.376. After this step the flashing of twrp was finally successful. Thanks to darkjoker!!
New TWRP update is up !
Changelog
Code:
[CENTER]* Synced with latest TWRP source code
* FIxed flashing errors[/CENTER]
DONATIONS
Check OP for more info and download !
Related
Update 180914:
Always believe something wonderful is just going to happen.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE:
IF YOU STUCK AT MI ACCOUNT LOGIN, make sure you flashed permissiver
If the device says your device has mi account locked, then pull simcard out and reboot to complete the setup.
If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
For Chinese users you can contact me via Coolapk.See my signature.
v1:
Initial release
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
This for Aonly or A/B?
how about huawei device？
山海蓝精灵 said:
how about huawei device？
Click to expand...
Click to collapse
Idk, maybe need 8.1 vendor huawei device
fxsheep said:
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
v1:
Initial release
arm builds WIP
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
Click to expand...
Click to collapse
is volte working?
fxsheep said:
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
v1:
Initial release
arm builds WIP
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
Click to expand...
Click to collapse
AB support please!!!
wmfanboy25 said:
AB support please!!!
Click to expand...
Click to collapse
I don't have A/B devices ,so I don't get familiar with how A/B devices work,also this MIUI port is from an Aonly device, converting Aonly to A/B image is more difficult than vice versa
Global or Chinese?
Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).
[email protected] said:
Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).
Click to expand...
Click to collapse
take log or try clean flashing
Im flashing now to op5t and will report back soon.
Status:
1. Booted
2. Stucked in Sign in to your Mi Account, even if i disabled use cloud sync. I see is Couldn't check device security info.
Does this sgsi has arb feature?
Stuck at mi account log in. Couldn check device status
fxsheep said:
...
Click to expand...
Click to collapse
I want try at MiPad 4. It is arm64, aonly.
What do u think?
Can this be flashed on redmi note 3 pro (kenzo)?
other dead Rom
fountoutch Dead
Oos Dead
miui 10 Dead
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
ebautista said:
Im flashing now to op5t and will report back soon.
Status:
1. Booted
2. Stucked in Sign in to your Mi Account, even if i disabled use cloud sync. I see is Couldn't check device security info.
Click to expand...
Click to collapse
yogasetyaadi said:
Stuck at mi account log in. Couldn check device status
Click to expand...
Click to collapse
Reboot and retry, so many people booted
dcduartee said:
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
Click to expand...
Click to collapse
Mount vendor in twrp
dcduartee said:
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
Click to expand...
Click to collapse
Vendor mounted?
Hi,
you want to flash EMUI 9 Beta, are FRP and bootloader unlocked and rooted? Great, here we go.
Disclaimer: I am not responsible for your bricked devices. This has only been tested by a few people with Windows 10 and EML-L29 C432. Other models may or may not work. Please don't use that method if you don't know how to recover your phone from a bricked or semi-bricked state.
It might be a good idea to disable your antivirus if you run into warnings. There is no root.
Steps:
- Download THE TOOL™ v0.2
- Download the matching firmware bundle for your device. With EMUI 9 the firmware files for L09 and L29 differ.
- Extract THE TOOL™
- Extract the firmware bundle, you'll get two ZIPs and some XMLs.
- Start FLASH.bat inside of the extracted tool folder - it will guide you through the procedure.
- I did not have to factory reset. Maybe you will still need to.
- I have no idea if you will be able to receive OTAs or upgrade to future builds.
Disclaimer: Its not my fault or my responsibility if you brick your phone. I have almost no spare time at the moment, so I will probably not be able to help you. Also, there is no root.
Download:
EML-L09 C432 - Build 9.0.0.47
EML-L29 C432 - Build 9.0.0.45
Massive thanks to:
- @Atarii
- @Androlark
- @ante0
- @dkionline
- @frantorresm5434
- laststandingdroid
- @mankindtw for the original NoCheck recovery
- @Pretoriano80
- @shimp208 for the bundled minimal ADB + Fastboot
- and of course to all the brave testers!
There is no root. Also, please don't blame if your device dies. And I don't know if VoLTE works.
Click HERE for the P20 Pro (CLT) thread.
07.09.2017 - v0.2 - script now should work inside path containing spaces
06.09.2018 - v0.1 - initial release
Good job, funcionando perfeitamente aqui
Drekko said:
Good job, funcionando perfeitamente aqui
Click to expand...
Click to collapse
Which model version do you have, C432?
burgess_boy said:
Which model version do you have, C432?
Click to expand...
Click to collapse
yes c432
Will this work by sideloading the firmware with ADB (without root and unlocked bootloader)?
my phone is locked. So I don think this will work for me.
VoLTE works perfect!
No su message
The script always end with this no su error. I don't get the permantly grant root message.
I tried the script several times. But everytime the same error....
Any new info on possible root with this? Or do we have to wait till the full EMUI 9 release for that?
Muscar said:
Any new info on possible root with this? Or do we have to wait till the full EMUI 9 release for that?
Click to expand...
Click to collapse
one way only huawei service center and flash by test point or all time update from funkyhuawei.club I have sam case
I already unlocked my bootloader and currently rooted on EMUI 8.1, got everything I need to do it with Android Pie. I've been looking into other ROMs like Lineage and AOSP, but I haven't found any good info for the P20... Only for the P20 Pro and Lite, which really sucks, it feels like the normal P20 doesn't even exist, a lot of forums only have subs for the Pro and Lite, it's very annoying.
What is stopping me, or anyone that was lucky enough to root before Huawei stopped that, from rooting EMUI 9? I don't have a lot of experience with android and roms so I'm kinda fuzzy on details.
Morning,
All is alright but... it is not possible to root p20 (some people explained same like genius but i'm not genius)
Where is the best method to root huawei p20.
Thx in advance have a nice day
Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ
curtricias said:
Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ
Click to expand...
Click to collapse
Are the new gestures included in this version?
Mara-X said:
Are the new gestures included in this version?
Click to expand...
Click to collapse
No.
curtricias said:
No.
Click to expand...
Click to collapse
How's battery on beta? Better than android 8?
curtricias said:
Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ
Click to expand...
Click to collapse
Which file to use between the two if im now on 8.1
curtricias said:
Yesterday successfully installed the latest beta.
I've uploaded the firmware (9.0.0.108)
https://mega.nz/#F!LCIBUAQR!789eoK8f-v-aBzOnB9CzxQ
Click to expand...
Click to collapse
Got it right. Used these files with instructions on OP
You must be on stock emui. And rooted. So first flash back your stich system.img en stock recovery. Then follow the tutorial in the OP.
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
EDIT: side note, apparently people on here are asking if this is for real or not lol. heres a screenshot in here https://imgur.com/a/depZugF
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to treble rom dev and have a go at it guys!
Edit: BIG THANKS TO JAX
download everything except hwota> https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
unlock bootloader
flash nougat compatable twrp (search the dev form)
thanks jax 5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
place all three filles in same folder on sdcard
download hurupdater (search the form)
place it in same folder as the file just mentioned
boot to twrp.
format system data cache
navigate to sdcard the update folder with all four files.
flash hurupdater.zip
press vol down
wait for completion
reboot system
wait 10 minutes
hold power till reboot
boot to recovery and it should be stock.
format data
reboot
should boot up and work flawlessly except for missing browser which can be downloaded :/
woot you are on emui 8 and your partition setup is now oreo
now turn phone off
hold vol down and plug into pc with fastboot tools
go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development
download a oreo rom A only (i used Resurrection Remix)
flash system with fastboot
reboot to recovery
format data
reboot
profit.
BONUS
go here after all said and done https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
make sure to thank KingOfMezi
download this https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
fastboot flash recovery_ramdisk RECOVERY-V2.img
boot to recovery and flash latest magisk for root goodies
Which emui 8 did you flash ? I have a usa Honor 6x and would like to do the same
pspgarret said:
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to trble rom dev and have a go at it guys!
Click to expand...
Click to collapse
is themes apps working for you? flashing emui 8 via huru will give incomplete flash.
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
How do you do it?, Where is the links of the files?
thanks for responses, i updated the op and hopefully that is a bit more informative.
let me know if it is confusing at all and ill try to fix it
Can i flash p gsi.? (havoc 2.0)
And.. Is volte working..?
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
jhorne917 said:
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
Click to expand...
Click to collapse
It's not a custom rom... It's gsi
anyone tested other gsi? i only tried open kirin roms
are you sure it didn't rebranded? at about information, it say bln-24 or bln-al20? it could brick the phone, I thinks is better using the emui 8 from india instead the china version
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
pspgarret said:
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
Click to expand...
Click to collapse
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Nollie8969 said:
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Click to expand...
Click to collapse
op states i upgraded to emui 8 using nothing but hurupdater script and update packages in 7.x twrp buddy
https://imgur.com/a/depZugF
That's great man, i need to backup a lot of stuff since last TWRP backup, but I'm definitely gonna do this. I own a BLN-L21, so i hope this'll works the same as on any other variant, and that would be the real gem in all of this. Thanks for sharing
galapagos said:
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
Click to expand...
Click to collapse
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
You mean the guide: How to brick your phone ?
Nollie8969 said:
You mean the guide: How to brick your phone ?
Click to expand...
Click to collapse
That's helpful and informative.
johnnyrichter said:
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
Click to expand...
Click to collapse
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
galapagos said:
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
Click to expand...
Click to collapse
During your testing, which ROM has been the most stable in terms of daily-driver use so far? Last year after getting this 6x I tried a few different ROMS, back before OpenKirin happened, and had nothing but problems with boot loops and etc so I went back to stock EMUI5. Few days ago I got B365 and then B376 via OTA after installing the Huawei software on my PC. This phone really makes me miss my S5 with LineageOS.
Project Treble for F8131/2 [Android 10]ReadMe
Hello, everyone, I'm Sjll. Tone family(Xperia msm8996 devices) will stay at kernel 4.9 for Android 10. Our treble support for Android 10 has been released. There are some differences between Treble Pie, you need to know that:
1. GSI should be A/B ARM64. NOT A only as Pie.
2. TWRP should use a new version for Android 10.
3. Never flash software binaries from SODP, it has been included in vendor.img
I am not responsible for bricked devices, dead SD cards
Required Files
Treble Files::
AndroidFileHost: Download Link
TWRP for Android 10.0::
Download Link
How to flash:
1. Download Treble Files and extract it.
2.
Code:
fastboot flash boot boot.img
fastboot flash oem vendor.img
fastboot flash system <Path of GSI.img>
3.Flash Twrp and other MODs.
4.Boot and enjoy
For F8132:
Flash a dual patch in twrp: You can download it from here.
For Devs:
See @local__hero's post: Link
Update and bugs:
V2.10:
Update to android-10.0.0-R31.
V1.96:
Update: Minimum brightness fixed.
V1.90:
Update: Rotation is fixed.
V1.86:
Update: Hotspot is fixed.
Bugs: Rotation is wrong.
V1.0:
Bugs: Hotspot is broken.
XDA:DevDB Information
Treble, ROM for the Sony Xperia X Performance
Source Codes
Link
Contributors
Sjll
ROM OS Version: 10.0
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Beta
Created 2020-01-25
Last Updated 2020-03-18
Reserved
Reserved
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
edy sunanto said:
hi sjjll ... thanks a lot .. the rom is very good and nice to use ... but this treble project doesn't support erfan GSi like your AOnly treble project ... almost all erfan ported ROMs that can boting the AOnly treble project can't boot at this treble project .. is there a solution ..? Thank you very much
Click to expand...
Click to collapse
Hello, I think you'd better ask the GSI devs for help.
ok ... thanks a lot ... very good project ... bluetooth can't be connected in my device
Finally new treble project.. Thanks sjll.. Very appreciate it!
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Fhcker90 said:
Hello.. Which gsi you were trying to use?
This vendor based on aosp pure gsi.. This will compatible with phhuson's gsi,expressluke's gsi,..you can try Pixel Experience by expressluke latest build.. Its already tested and booted.. Havoc os 3.1 Expressluke also working fine with this sjll's vendor..
Click to expand...
Click to collapse
yes this treble project works well on havoc 3.1 expressluke .. i've tried it .. cooler and feels lighter ..
Thank's to sjll
Z3r0.v said:
hi! i have a problem, my phone dont start, i try few gsi's ( AB arm64 format) and no one dont start, only trying finish bootanimations, can you help me? I have a f8132, and trying flash your fix for dual, but with it or whithout - dont work..
Click to expand...
Click to collapse
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
I trying lineage from you, trying havoc 3.1 expressluke and nothing
On lineage bootanimation dont start, on havoc problem with bootloop, idk how i cat solved this problem..
Sjll said:
Try lineage GSI please.
https://forum.xda-developers.com/pr...lopment/gsi-lineageos-17-0-gsi-archs-t4004673
Click to expand...
Click to collapse
f8132. The patch for dual sim does not work. in single SIM card mode - it doesn’t work with all operators, I live in Kazakhstan - the beeline and the asset work without problems, Altel and Body 2 do not work. Wi-Fi also turns off after 10 minutes of use. is there any way to solve the communication problem? I liked everything, but for work I need two sims - Beeline and Altel. And it’s not convenient to carry two phones with you.
DAC doesn't work
what is the difference between v1 and v2?
OTG does not work
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
atlantix1 said:
Cannot get this to work. Installing latest Oreo stock rom via flashtool. Booting it once. Then I put the device into fastboot mode, flashing everything exactly as described. I have tried several GSIs (PixelExperience, Lineage, HavocOS 3.1). Of course arm64 AB. When I reboot, I always end in a boot loop after the boot logo. When I boot into TWRP recovery, I see error messages like "cannot mount /data and unable to find crypto footer. Failed to mount /data…" and so on. But formatting /data in TWRP does not help: When I reboot afterwards it is just the same. Boot logo, reboot, boot logo, reboot.... forever.
Am I missing something? Do I have to disable encryption or soemthing like that? Thanks for any hints.
Click to expand...
Click to collapse
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Some random said:
After flashing stock and booting it once. Make sure to wipe everything except internal storage and SD and then flash the files. Also, have you tried flashing trough a PC?
Click to expand...
Click to collapse
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
atlantix1 said:
Okay, I now also wiped everything *before* flashing the treble Images. But the result is the same. I flash via PC and the current version of fastboot. I have also tried now version 1.96 of the treble Images (tried 2 before) with no luck. Anyway, thanks for the advice.
Click to expand...
Click to collapse
Hmmmmmmmm.
Sad
Sadly, thats all that comes to mind... What Rom Were you trying to install? (GSI)
Team Win Recovery Project 3.x is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
By @pjgowtham and @mauronofrio
Note that two kinds of builds are available. The only difference between these builds is that one does adjust for the notch space and adds black border on top and the other TWRP shows as full screen.
Features:
- Temporarily disabled compatibility.zip check to allow flashing stock ROMs
- Ozip decryption
- Device data decryption
- Reboot to EDL
- Full android 9/10 support
and everything a TWRP usually does.
Release 02/02/20
- Updated kernel to android 10
- Updated blobs to android 10
Release 03/02/20
- Device data decryption support added
Release 04/02/20 (stable build)
-Disabled compatibility zip check to allow flashing stock ozip.
Release 08/02/20
- Added TWRP theme for notched devices (thanks to @mauronofrio)
Release 12/02/20[/B][/U]
- Added dtbo.img to the recovery so that it can support both Android pie and 10 firmware
Release 29/02/20
- Added the ability to backup, restore and flash persist partition
- Added the ability to backup, restore internal storage
Bugs :
None
XDA:DevDB Information
TWRP, Tool/Utility for the Realme XT
Contributors
pjgowtham, mauronofrio, thesprintster
Device Tree
https://github.com/pjgowtham/device_realme_RMX1921
https://github.com/mauronofrio/device_realme_RMX1921
Download Link
Stable build : 12/02/20
https://androidfilehost.com/?w=files&flid=304993
@mauronofrio s TWRP builds are included too.
FAQ :
Refer wiki here :,
https://forum.xda-developers.com/realme-xt/how-to/guide-unlocking-unbricking-custom-t4045505
Version Information
Status: Stable
Created 2020-02-02
Last Updated 2020-03-29
Thanks for your afford
can i flash magisk with this twrp and root andriod 10?
Data Decryption doesn't work.
If you can add it, it would be perfect.
ashruz.ash said:
Data Decryption doesn't work.
If you can add it, it would be perfect.
Click to expand...
Click to collapse
Should be fixed in the next build
sonu0070 said:
Thanks for your afford
can i flash magisk with this twrp and root andriod 10?
Click to expand...
Click to collapse
Yes, just remember to flash vbmeta immediately after you flash the magisk otherwise it will show recovery destroyed error
pjgowtham said:
Yes, just remember to flash vbmeta immediately after you flash the magisk otherwise it will show recovery destroyed error
Click to expand...
Click to collapse
Thanks for reply can you send me link of vbmeta
I am confused which one should I flash.
sonu0070 said:
Thanks for reply can you send me link of vbmeta
I am confused which one should I flash.
Click to expand...
Click to collapse
You would be okay with los vbmeta or any vbmeta for that sake. Just use the flags before flashing. I added FAQs in the original post just now.
EDIT:
Seems like there's issues with vbmeta. Use the vbmeta that's pinned on the wiki
pjgowtham said:
You would be okay with los vbmeta or any vbmeta for that sake. Just use the flags before flashing. I added FAQs in the original post just now.
EDIT:
Seems like there's issues with vbmeta. Use the vbmeta that's pinned on the wiki
Click to expand...
Click to collapse
Hi,
How did you unlock Realme XT with Android 10(realme UI) ...the Deeptesting app isnt working for unlock bootloader
Is there Process for Android 10 unlock before we flash TWRP and vmbeta img from other blog ?
Regards,
Diaz M
diazneoones82 said:
Hi,
How did you unlock Realme XT with Android 10(realme UI) ...the Deeptesting app isnt working for unlock bootloader
Is there Process for Android 10 unlock before we flash TWRP and vmbeta img from other blog ?
Regards,
Diaz M
Click to expand...
Click to collapse
Please refer the wiki. You should unlock on pie itself. That way you have unlocked bootloader on 10.
Why there is no 10 based custom roms for xt? Can't devs can port custom roms of realme x to xt atleast? The fingerprint issues are already solved, right?
ashruz.ash said:
Why there is no 10 based custom roms for xt? Can't devs can port custom roms of realme x to xt atleast? The fingerprint issues are already solved, right?
Click to expand...
Click to collapse
A week back we didn't have a wiki page, a backup of the stock recovery, a stable twrp. It's only been a week now since these work were done. On top of it, realme is not very proactive with the kernel sources. But its only a matter of time since we bring up lineage 17.1 or pixel experience. We are working on it.
Good to hear.
Backup taken via TWRP failed fr system image..this happens for both stock rom and custom rms too..has anyone taken successful backup
I get following error when flashed stock rom of Color OS ior RUI in TWRP
failed to mount /dev/block/bootdevice/by-name/userdata at /data
diazneoones82 said:
Backup taken via TWRP failed fr system image..this happens for both stock rom and custom rms too..has anyone taken successful backup
Click to expand...
Click to collapse
Try the latest build maybe
Do you have the indian variant of the device or something else?
Can i flash it on rui c.03
Samrra said:
Can i flash it on rui c.03
Click to expand...
Click to collapse
No u need to unlock your boorloader 1st kindly reas it. It doesnt work in realme ui
My twrp realme xt back to stock recovery...how to solve it?
Samrra said:
Can i flash it on rui c.03
Click to expand...
Click to collapse
Yes you can flash even on the yet to be released C.04
krizhiel said:
No u need to unlock your boorloader 1st kindly reas it. It doesnt work in realme ui
Click to expand...
Click to collapse
It works on realme UI