Develop Bugs

GSI ROM Testing (8.1.0)

Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
EDIT: side note, apparently people on here are asking if this is for real or not lol. heres a screenshot in here https://imgur.com/a/depZugF
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to treble rom dev and have a go at it guys!
Edit: BIG THANKS TO JAX
download everything except hwota> https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
unlock bootloader
flash nougat compatable twrp (search the dev form)
thanks jax 5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
place all three filles in same folder on sdcard
download hurupdater (search the form)
place it in same folder as the file just mentioned
boot to twrp.
format system data cache
navigate to sdcard the update folder with all four files.
flash hurupdater.zip
press vol down
wait for completion
reboot system
wait 10 minutes
hold power till reboot
boot to recovery and it should be stock.
format data
reboot
should boot up and work flawlessly except for missing browser which can be downloaded :/
woot you are on emui 8 and your partition setup is now oreo
now turn phone off
hold vol down and plug into pc with fastboot tools
go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development
download a oreo rom A only (i used Resurrection Remix)
flash system with fastboot
reboot to recovery
format data
reboot
profit.
BONUS
go here after all said and done https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
make sure to thank KingOfMezi
download this https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
fastboot flash recovery_ramdisk RECOVERY-V2.img
boot to recovery and flash latest magisk for root goodies

Which emui 8 did you flash ? I have a usa Honor 6x and would like to do the same

pspgarret said:
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to trble rom dev and have a go at it guys!
Click to expand...
Click to collapse
is themes apps working for you? flashing emui 8 via huru will give incomplete flash.

This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.

How do you do it?, Where is the links of the files?

thanks for responses, i updated the op and hopefully that is a bit more informative.
let me know if it is confusing at all and ill try to fix it

Can i flash p gsi.? (havoc 2.0)
And.. Is volte working..?

If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf

jhorne917 said:
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
Click to expand...
Click to collapse
It's not a custom rom... It's gsi

anyone tested other gsi? i only tried open kirin roms

are you sure it didn't rebranded? at about information, it say bln-24 or bln-al20? it could brick the phone, I thinks is better using the emui 8 from india instead the china version

hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.

pspgarret said:
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
Click to expand...
Click to collapse
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?

Nollie8969 said:
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Click to expand...
Click to collapse
op states i upgraded to emui 8 using nothing but hurupdater script and update packages in 7.x twrp buddy
https://imgur.com/a/depZugF

That's great man, i need to backup a lot of stuff since last TWRP backup, but I'm definitely gonna do this. I own a BLN-L21, so i hope this'll works the same as on any other variant, and that would be the real gem in all of this. Thanks for sharing

galapagos said:
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
Click to expand...
Click to collapse
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?

You mean the guide: How to brick your phone ?

Nollie8969 said:
You mean the guide: How to brick your phone ?
Click to expand...
Click to collapse
That's helpful and informative.

johnnyrichter said:
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
Click to expand...
Click to collapse
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.

galapagos said:
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
Click to expand...
Click to collapse
During your testing, which ROM has been the most stable in terms of daily-driver use so far? Last year after getting this 6x I tried a few different ROMS, back before OpenKirin happened, and had nothing but problems with boot loops and etc so I went back to stock EMUI5. Few days ago I got B365 and then B376 via OTA after installing the Huawei software on my PC. This phone really makes me miss my S5 with LineageOS.

[RECOVERY][warsaw][3.4.0-0]TWRP for Huawei P10 Lite

TWRP for Huawei P10 Lite
Working
Code:
[CENTER]* Touchscreen
* Adb
* Backup
* Wipe
* File manager
* MTP
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
Installation
Code:
[CENTER]* put you phone in fastboot mode and type
"fastboot flash recovery_ramdisk <grab_here_the_img>"
* reboot
[/CENTER]
Download
Code:
[CENTER][URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P10%20Lite/Pie/TWRP/"]TWRP[/URL]
[/CENTER]
Credits:
@Pretoriano80
@haky 86
@OldDroid
@DarkDroidDev
Please support my work, it's very important! Thanks
DONATIONS
Regards !​

Reserved

sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!

Great .. after testing on WAS-LX1A
i dunno why you're telling that mtp/backups doesn't work !
For me Backups work and internal storage / SD shown on windows normally
*Edit
Can't copy files
Thanks for your precious work .

-CALIBAN666- said:
sorry for this request here, but please say me, will your stuff like this recovery and roms for p10 lite work on p8 lite 2017 because when im not wrong ive read some stuff work on different huawei phones with same chipsets etc, is it true?Big thanx, keep up your great work, have a nice day. Greeetz!!!
Click to expand...
Click to collapse
I've installed RR and Bootleggers ROM's on P8 Lite 2017 and it works. All ROM's and Recoveries for hi6250 based devices (Kirin 655, 658, 659) will work on each other.

Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?

GizmoTheGreen said:
Hi, when trying to install your Android AOSP 9 pie ROM with this TWRP recovery... I get message
E3004: This package is for "hi6250" devices; this is a "warsaw"
please help?
Click to expand...
Click to collapse
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.

NeoPreacher said:
It could work if you edit the updater-script. In your rom zip open the updater-script file with text editor (Rom.zip/META-INF/com/google/android) and delete the first lines which are for the device verification including the ones giving the error output. This leads to no device check while flashing. :fingers-crossed: . For me it was really helpful in some cases.
Click to expand...
Click to collapse
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;

GizmoTheGreen said:
You would think when the same guy dev both Recovery and ROMS they would have that fixed? ^^;;
Click to expand...
Click to collapse
yeah, this is going to happen soon !

@DarkJoker360
How could I know if my device is hi6250 or warsaw?

chiduja said:
@DarkJoker360
How could I know if my device is hi6250 or warsaw?
Click to expand...
Click to collapse
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.

NeoPreacher said:
hi6250 is the device chipset marking which matches multiple devices, warsaw is especially this device as in my case WAS-LX1A (WAS is warsaw). every warsaw is a hi6250 but not every hi6250 is a warsaw.
Click to expand...
Click to collapse
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.

chiduja said:
Thank you, I asked it because I not capable of flash custom ROMs on my P10 Lite WAS-LX3 the problem is: after the clean installation of AOSP 9.0 mi phone get stuck in: your device is booting now... And then go to eRecovery not to TWRP and don't boot on system. I don't know what I have to do.
Click to expand...
Click to collapse
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.

NeoPreacher said:
i had and still have the same results when trying to flash aosp. did you also decrypt your device before flashing any rom? could also be helpful in some cases.
Click to expand...
Click to collapse
The first time that I tried to do the flashing I had to put my patron, but I've never did the decrypt, It's ****ty I tried a lot of "Solutions" but It doesn't worked.

ok alright the problembis that i tried to use "warsaw" codename instead of "hi6250" but it is not working for some reason, it is a flashing issue, and probably i have to revert my changes...
EDIT: before reverting my changes I wanted to try with LineageOS 16.0

Hi
Is there a prerequisite to use this recovery, I'm still using twrp 3.1.1-2 made by KingofMezi so still emui 5.0 but that recovery doesn't allow data backup because of the encryption. So I tried to flash yours it was ok in the command window but when I try to boot in recovery I get an error. I tried flashing again, downloading again and flashing but still doesn't work any idea?
I didn't want to upgrade the rom without a proper backup but none of the recoveries have been working.

Hi! Does someone try to install on a p20 lite?

@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0

diy_solomun said:
@DarkJoker360 thanks for your work! Looks amazing.
I've never flashed TWRP before so I am bit nervous of bricking my phone!
I finally managed to unlock my bootloader by downgrading to EMUI 5.1.1, Android 7.0 (...). Will your TWRP work from this version? Is there any benefit/drawback of updating my phone to EMUI 8.0.0/Android 8.0.0 before flashing your TWRP?
P10Lite:
Model: WAS-LX1A
Build: WAS-LX1AC432B209
EMIU: 5.1.1
Android: 7.0
Click to expand...
Click to collapse
I asked myself the same question and tried to flash twrp on android 7.0 but it didn't work. I tried to upgrade to android 8 via erecovery but it failed. So i managed to upgrade it to B366 Emui 8 with dload (https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946) but i still could not flash twrp. So i entered erecovery mode again (press power, volume up & down for a few seconds) and with android 8 i could recover it to the official 8.0.0.376. After this step the flashing of twrp was finally successful. Thanks to darkjoker!!

New TWRP update is up !
Changelog
Code:
[CENTER]* Synced with latest TWRP source code
* FIxed flashing errors[/CENTER]
DONATIONS
Check OP for more info and download !​

Ramdisk FW for SHT-W09 9.1.0.335 (8.4" UK)

I don't know if anyone else uses this device anymore, but worth a shot! I've lost root on my UK MediaPad M5 SHT-W09 9.1.0.335 (C432E3R1P2).
I'm trying to get hold of the full FW download so that I can re-patch the ramdisk with Magisk. I can't find it anywhere, though, not even through Hawawei Firmare Finder - the latest SHT-W09 FW from there is 9.0.1.160, all later ones are SHT-LGRP2. Even then, the best matches for a FullOTA are 9.1.0.333 and 9.1.0.336 (only OTA for 335).
Is it "safe" to use the ramdisk image from what's on Firmware Finder? 333 or 336?
Or do I need to get hold of the 335 FullOTA for SHT-W09?
Thank you!

Needed too..

You can scan the huawei firmwares by yourself to get the exhaustive list. With something similar to :
Huawei firmware scanner
I ran a scan for you it should be finished in a few hours. You will be able to access it in the cameron.html link in this this thread (the data will auto-update once the server will be done) :
Huawei mediapad firmwares

emiliewgnr said:
You can scan the huawei firmwares by yourself to get the exhaustive list. With something similar to :
Huawei firmware scanner
I ran a scan for you it should be finished in a few hours. You will be able to access it in the cameron.html link in this this thread (the data will auto-update once the server will be done) :
Huawei mediapad firmwares
Click to expand...
Click to collapse
Amazing, thank you!

mroshaw said:
I don't know if anyone else uses this device anymore, but worth a shot! I've lost root on my UK MediaPad M5 SHT-W09 9.1.0.335 (C432E3R1P2).
I'm trying to get hold of the full FW download so that I can re-patch the ramdisk with Magisk. I can't find it anywhere, though, not even through Hawawei Firmare Finder - the latest SHT-W09 FW from there is 9.0.1.160, all later ones are SHT-LGRP2. Even then, the best matches for a FullOTA are 9.1.0.333 and 9.1.0.336 (only OTA for 335).
Is it "safe" to use the ramdisk image from what's on Firmware Finder? 333 or 336?
Or do I need to get hold of the 335 FullOTA for SHT-W09?
Thank you!
Click to expand...
Click to collapse
I see the FULL package for all of those versions via Firmware Finder. SHT-W09. Mind you, they changed the naming convention for this model's firmware.

sarichter said:
I see the FULL package for all of those versions via Firmware Finder. SHT-W09. Mind you, they changed the naming convention for this model's firmware.
Click to expand...
Click to collapse
Hi - Could you clarify this, please ?
I can see SHT-LGRP2-OVS and SHT-LGRP3-OVS versions of 9.1.0.335.
Are either/both of these compatible with SHT-W09 ?
Could you flash the full firmware rather than just the ramdisk ?
What about local variants (eg. C432 etc.) ?
Thank you.

emiliewgnr said:
You can scan the huawei firmwares by yourself to get the exhaustive list. With something similar to :
Huawei firmware scanner
Click to expand...
Click to collapse
mroshaw said:
Amazing, thank you!
Click to expand...
Click to collapse
Which firmware/ramdisk did you use ?
Thank you.

Just pick the SHT-LGRP2-OVS 9.1.0.335 (approved + full).
For magisk only flash the patched recovery_ramdisk (or stock to get back).
Also the system.img is useful to get back to stock from e.g. phhusson's GSIs Android 11 which is great BTW.

Stupid question, I lost root recently on my M5 and am trying to get it back. I have a US M5 so I'm still on Android 8.0.
When flashing the patched ramdisk image do you use the command "fastboot flash ramdisk Magisk_patched.img" or "Fastboot flash boot Magisk_patched.img".
Thanks,
Rick

emiliewgnr said:
Just pick the SHT-LGRP2-OVS 9.1.0.335 (approved + full).
For magisk only flash the patched recovery_ramdisk (or stock to get back).
Also the system.img is useful to get back to stock from e.g. phhusson's GSIs Android 11 which is great BTW.
Click to expand...
Click to collapse
oh cool, i was actually wondering if the M5 is still compatible with GSI roms so how is Android 10 and 11 GSI working on it? any experiences you can share would be great! my gf's M5 is currently on Android 9 GSI and its been running great.

jbmc83 said:
oh cool, i was actually wondering if the M5 is still compatible with GSI roms so how is Android 10 and 11 GSI working on it? any experiences you can share would be great! my gf's M5 is currently on Android 9 GSI and its been running great.
Click to expand...
Click to collapse
Both Android 10 and 11 GSIs work well for me. Some of the 11 ones are getting too large for the M5's system partition, although this can usually be overcome by deleting unneccessary VNDK files from the image.
See this comment by CAOS GSI developer eremitein.

yatsura2k said:
Both Android 10 and 11 GSIs work well for me. Some of the 11 ones are getting too large for the M5's system partition, although this can usually be overcome by deleting unneccessary VNDK files from the image.
See this comment by CAOS GSI developer eremitein.
Click to expand...
Click to collapse
very nice info, thx for that! encountered anything that isnt working on the M5 with 10 or 11?

jbmc83 said:
very nice info, thx for that! encountered anything that isnt working on the M5 with 10 or 11?
Click to expand...
Click to collapse
I use Android 10 (HavocOS 3.12) for daily use - everything works fine.
Magisk works and it passes SafetyNet with the 'Universal SafetyNet Fix' module.
I tried phhusson's Phh-Treble 11 for a couple of days and everything seemed OK, but I'm waiting for it to come out of 'pre-release' before moving off HavocOS 3.12; the latest 11-based builds of that are far too large, even after removing redundant VNDKs.
It is worth noting that I have a WiFi-only M5 (SHT-W09) and so can't comment on whether the telephony parts of Android 10 or 11 work correctly.

Question ColorOS open beta on EU Model

Does it work to flash the ColorOS OB on the EU model?
Is the modem working?
edit:
got it working now. i did it this way
1. Updated to OOS Open Beta link
2. Download Color OS from your source
3. Install OPLocalUpdate and copy coloros to the root of your phone
4. Set the build date to 1400000000
apply in terminal
Code:
su
resetprop ro.build.data.utc 1400000000
5. Start the update with the apk above
6. ???
7. profit
use it for 3 days now and its stable as oos.
i think its more fluid and smooth then oxygenos, but there is a lot of bloatware and some apps are on chinese, i debloated those
props to @null0seven
​

Hey!
Yes, the OOS OB works on the EU model, be sure to choose the NA variant (which is the global one, as the EU version is not available due to strict European laws).
Everything works as intended on my end.
Hope this helps.

IN variant is also OK, though.
IN variant has theme store, WLB 2.0 and super power saving.

LOL Guys, he asked about COLOR OS.
ON TOPIC - Modem works fine since trial versions of COS. Go give it a try.

Sheldd said:
LOL Guys, he asked about COLOR OS.
ON TOPIC - Modem works fine since trial versions of COS. Go give it a try.
Click to expand...
Click to collapse
i tried, but i can't even install it.. tried via twrp or local update

Where can i download the color os for oneplus 9 pro global?

habobababo said:
i tried, but i can't even install it.. tried via twrp or local update
Click to expand...
Click to collapse
Look in 9 series general thread on telegram, you need a new app for local update

toolhas4degrees said:
Look in 9 series general thread on telegram, you need a new app for local update
Click to expand...
Click to collapse
i also tried that. Even downgraded to 11.2.8.8. Local update gives me an error.
Edit:
got it installing now.
Solution:
set ro.build.date.utc to 1400000000 via terminal
Code:
resetprop ro.build.data.utc 1400000000

This could help other users so please put in OP instructions to install & how it works for you. Pro & cons.
Thank you.

A video quick guide "How to Install COLOR OS 12 on Oneplus 9 & 9 Pro"
Color OS have the option in Gestures "Raise to answer a call" ?
And less google BS ?
habobababo
Please put a link for download the rom. User will ask you for sure.

I read that next week the Color OS team will release Color OS 12

Version global?

Question Any Xiaomi 11 T root guide ?

Hello , i need a written or video guide to root my Xiaomi 11 T miUi 14 global Android 13

same for your device just used the img for your device.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Root Xiaomi 11T pro on latest MIUI 13-Working!
Quick update and guide for those wishing to root their Xiaomi on the lastest stable MUIU 13 since TWRP is no longer working on Android 12 MUIU 13. No need to downgrade version, just use whatever you latest ROM you are on. This should be...
forum.xda-developers.com

NOSS8 said:
same for your device just used the img for your device.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Root Xiaomi 11T pro on latest MIUI 13-Working!
Quick update and guide for those wishing to root their Xiaomi on the lastest stable MUIU 13 since TWRP is no longer working on Android 12 MUIU 13. No need to downgrade version, just use whatever you latest ROM you are on. This should be...
forum.xda-developers.com
Click to expand...
Click to collapse
I didn't found someone in the thread that rooted my device , or maybe i didn't Scroll down enough . And this guide is one year old . I don't want to take anh risk and enter more trouble during the process

0xHelium said:
I didn't found someone in the thread that rooted my device , or maybe i didn't Scroll down enough . And this guide is one year old . I don't want to take anh risk and enter more trouble during the process
Click to expand...
Click to collapse
Nothing has changed, still the same method.

NOSS8 said:
Nothing has changed, still the same method.
Click to expand...
Click to collapse
thanks sir, my phone is rooted now