For G975N there are 3 Android Q firmware versions released by samsung as BSKO, BSL7, and BTA4 from old to newest.
Only kernel source of BSKO is released currently (2020-03-01) which you can find here: https://opensource.samsung.com/uploadSearch?searchValue=g975n
This recovery image is built based on kernel BSKO (G975NKSU3BSKO) and it works with BTA4 firmware so it should work with all these 3 firmware versions.
Note: This image is not Magisk patched yet, if you need magisk to be installed in recovery partition you'd have to patch this image yourself first.
How to use it?
refer to:
https://forum.xda-developers.com/galaxy-s10/development/magisk-root-galaxy-s10-series-t3918699
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Kernel source: https://github.com/allofee/kernel_g975n
Download link:https://mega.nz/#!bYpjhTBY!GoF_5SFb6Kk58k9P1ZwWYUMX2sKaQy7BjwyDUpLN_5I
edited on 2020/Mar/01.
allofee said:
For G975N there are 3 Android Q firmware versions released by samsung as BSKO, BSL7, and BTA4 from old to newest.
Only kernel source of BSKO is released currently (2020-03-01) which you can find here: https://opensource.samsung.com/uploadSearch?searchValue=g975n
This recovery image is built based on kernel BSKO (G975NKSU3BSKO) and it works with BTA4 firmware so it should work with all these 3 firmware versions.
Note: This image is not Magisk patched yet, if you need magisk to be installed in recovery partition you'd have to patch this image yourself first.
How to use it?
refer to:
https://forum.xda-developers.com/galaxy-s10/development/magisk-root-galaxy-s10-series-t3918699
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
Kernel source: https://github.com/allofee/kernel_g975n
Download link:https://mega.nz/#!bYpjhTBY!GoF_5SFb6Kk58k9P1ZwWYUMX2sKaQy7BjwyDUpLN_5I
edited on 2020/Mar/01.
Click to expand...
Click to collapse
The G97xF version works on G97xN too no need for this thread.
The ones meant for F/FD Variants work on N devices. The only differences are some radio bands and CSC. plus the N Variant being sold as a single sim only just like the F.
Thanks though
long time ago I tried the twrp but not working for my g975n, so I thought it's still not supported.
could you delete this post @admin? thanks.
Thanks for this amazing work !
Abaddon said:
The ones meant for F/FD Variants work on N devices. The only differences are some radio bands and CSC. plus the N Variant being sold as a single sim only just like the F.
Thanks though
Click to expand...
Click to collapse
Hello there!,
Does it mean that I can flash F variants rom on N device? like converting the korean to international?
Is it possible to just flash the F stock rom on my device?
Thanks,
m.orgilsaikhan said:
Hello there!,
Does it mean that I can flash F variants rom on N device? like converting the korean to international?
Is it possible to just flash the F stock rom on my device?
Thanks,
Click to expand...
Click to collapse
Via custom roms based on ONEUI with patched system and kernel. yes.
Via ODIN, you'd have to do some patching else it won't boot.
Can't exactly remember, but I had an N variant before.
Related
Hi,
I flashed version 14.1-2017016-UNOFFICIAL-n8013 to my Samsung galaxy note 10.1 wifi edition.
I would like to flash an official ROM on it in order to benefit from upgrades.
Looking at the lineageOS download section it seems that there is no N8013 version anymore. Should I take the one called n1awifi ? This is not clear for me.
If so, can I just flash it with twrp and keep all my settings and programs ? Or should I start right from the beginning?
Thank you!
Nobody for this one?
Thanks
bobbydjo said:
Hi,
I flashed version 14.1-2017016-UNOFFICIAL-n8013 to my Samsung galaxy note 10.1 wifi edition.
I would like to flash an official ROM on it in order to benefit from upgrades.
Looking at the lineageOS download section it seems that there is no N8013 version anymore. Should I take the one called n1awifi ? This is not clear for me.
If so, can I just flash it with twrp and keep all my settings and programs ? Or should I start right from the beginning?
Thank you!
Click to expand...
Click to collapse
Please be sure (check again, then again) which model you have... and let us know
If it is the Galaxy Note 10.1 (WIFI) n8013 you can download the stock firmware and flash it with ODIN.
NOTE: Pretty old software and no updates lately, in fact it still keeps the 4.1.2 Android Version as official.
But, this forum is for Galaxy Note 10.1 (2014 Edition) [SM-P600 variants], if you have this model, please check EXACTLY wich model it is... so we can give you a link to downlad the stock firmware or the right custom (lineageOS) ROM for device.
Otherwise we could be giving you wrong advice and you'll end up bricking your device.
RealRules said:
Please be sure (check again, then again) which model you have... and let us know
If it is the Galaxy Note 10.1 (WIFI) n8013 you can download the stock firmware and flash it with ODIN.
NOTE: Pretty old software and no updates lately, in fact it still keeps the 4.1.2 Android Version as official.
But, this forum is for Galaxy Note 10.1 (2014 Edition) [SM-P600 variants], if you have this model, please check EXACTLY wich model it is... so we can give you a link to downlad the stock firmware or the right custom (lineageOS) ROM for device.
Otherwise we could be giving you wrong advice and you'll end up bricking your device.
Click to expand...
Click to collapse
Hi,
Thank you for answering me, I was feeling a bit alone
On the back of the device I can read Model GT-N8010 wifi 16Gb.
I just ran an Antutu benchmark and the results are:
GT-N8013
Android 7.1.1 (32-bit)
Architecture: ARM Cortex-A9
CPU: Exynos 4412 1433 MHz
Resolution: 1280x800
size: 10.1 pouces
Renderer: Mali-400MP
Material: TFT
Density: 160 dpi
Back Camera: 4.9 mega pixel 2560x1920
Front Camera: 1.9 mega pixel 1392x1392
I hope this info is enough.
I'm currently running LineageOS 14.1.
My initial post has been moved to this forum, so I'm not sure if it's the right one.
I have TWRP as a recovery so I can easily flash a ROM, but which one? I'd be really happy if you could point me to the right one.
Thank you!
bobbydjo said:
On the back of the device I can read Model GT-N8010 wifi 16Gb.
Click to expand...
Click to collapse
bobbydjo said:
GT-N8013
Click to expand...
Click to collapse
Well... between GT-N8013 and GT-N8010 only difference is software... so you can install any. Use lastest ODIN as main way to flash.
Official Firmware:
GT-N8010: http:// rapidgator.net /file/9080b81b75100c8f164859ea386ef5c1 > Android 4.4.2 (KitKat) - Recommended
GT-N8013: http:// rapidgator.net /file/96d70a410efbabe165c620587b8cd5ac > Android 4.1.2 (JellyBean)
Notes:
1. Just erase the blank spaces to get links
2. I recommend GT-N8010 since is a newer Android (KitKat)
After download, flash it with latest ODIN (3.12.3) as known. Try to do a clean install, so the bootloader will update correctly.
bobbydjo said:
Android 7.1.1 (32-bit)
Architecture: ARM Cortex-A9
CPU: Exynos 4412 1433 MHz
I'm currently running LineageOS 14.1.
Click to expand...
Click to collapse
If you want/like newer Android versions and custom ROM, lineageOS is the best/most secure option still developing for this model... however, there are some issues since it is in Alpha Status.
https:// forum.xda-developers. com/ galaxy-note-10-1/development/rom-nougat-t3505239
There are other ROM projects too... but most seems abandoned, old dated. You can check for example the Gnabo version for GT-n108x.
bobbydjo said:
I have TWRP as a recovery so I can easily flash a ROM, but which one? I'd be really happy if you could point me to the right one.
Click to expand...
Click to collapse
After flash stock firmware with ODIN, you will lose TWRP, however... you can get it official from here:
https:// dl.twrp.me /p4noterf/twrp-2.8.7.0-gt-n8013.img.html > GT-N8013
https:// dl.twrp.me /p4noterf/twrp-2.8.7.0-gt-n8010.img.html > GT-N8010
After download, flash it with ODIN, but unclick Auto Reboot in options to flash it, then get in recovery mode before to reboot, it will ask you to swap to allow modifications, so you do. Otherwise it will be override with stock recovery and you must repeat process again.
To get root, simply copy latest SU.zip file to the sdcard and flash it with TWRP.
Once you are root, you can even try to upgrade to TWRP 3.xxx with the TWRP APK from Google Play if you like.
Final Notes:
Don't forget to use ODIN you must have the drivers for your samsung device correctly installed in your PC.
RealRules said:
Well... between GT-N8013 and GT-N8010 only difference is software... so you can install any.
If you want/like newer Android versions and custom ROM, lineageOS is the best/most secure option still developing for this model... however, there are some issues since it is in Alpha Status.
https:// forum.xda-developers. com/ galaxy-note-10-1/development/rom-nougat-t3505239
Click to expand...
Click to collapse
Thanks for the link, I'll give it a try.
Hello friends
I'm trying to flash custom Q roms in TWRP on my S9 (SM-G960F), but have received the same error message for any Q rom:
ERROR:
Vendor image on the device
is NOT compatible
Expected Android 10 vendor
Click to expand...
Click to collapse
I've only been able to successfully flash P roms, namely the Pie-based LightRom.
Based on the error message, it seems I need to update the firmware to Q before installing custom Q roms?
I've also seen some roms note installation requirements like "ROM Firmware Required: OneUI 2.x", which is new to me (have not seen a TW/OneUI ver requirement for roms I've used on S4, S7, N8).
May I ask someone to explain the steps required to install Q roms (eg, Havoc-OS) coming from P firmware? There seems to be some assumptions in most install instructions I'm not aware of, maybe since I am on older FW. (I am asking here, since I did not find instructions in any of the Q roms I tried)
So far, all I have done to the phone since unboxing it was to install TWRP 3.4.0, following the official guide for Exynos S9.
I am guessing I need to download latest official firmware image from sammobile or something for my device, and flash it in Odin. Is this correct?
If so, can someone explain the steps so that I can have latest FW for my device while maintaining TWRP and not bricking the device?
Thank you for your help
Extra info
(Snapshot from LightRom rom)
One UI version: 1.0
Android version: 9
Baseband version: G960FXXU6CSG4
Kernel version: 4.9.59
Android security patch level: 1 October 2019
Click to expand...
Click to collapse
UPDATE:
I installed latest firmware from Sammobile, flashed it through Odin following their instructions, reinstalled TWRP, and am now able to flash Q roms.
For those who have stock rom < Q, I would suggest updating firmware through OTA before flashing TWRP. If you cannot OTA, download the latest firmware from Sammobile and flash it through Odin following their instructions, then flash TWRP, then you can flash Q roms.
So:
Update firmware through OTA or via Odin with latest firmware from Sammobile.
Flash TWRP
Flash whatever rom you want.
Hi, i will probably upgrade to this phone and I was wondering if there are any custom roms or treble support for this device?
At the moment there aren't any custom recoveries for this device, as a result there are no custom ROMS available for flashing.
As for GSI's, if you have your bootloader unlocked you could use this GSI sideloader: github.com/VegaBobo/DSU-Sideloader
However, I am currently in the process of building a TWRP for this device, so perhaps custom ROM's will be available in the future...
If you do use the sideloader, i recommend: https://github.com/ponces/treble_build_pe/releases/tag/v412-plus and https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/ for the latest android 12l/12.1
TheYellowRay said:
At the moment there aren't any custom recoveries for this device, as a result there are no custom ROMS available for flashing.
As for GSI's, if you have your bootloader unlocked you could use this GSI sideloader: github.com/VegaBobo/DSU-Sideloader
However, I am currently in the process of building a TWRP for this device, so perhaps custom ROM's will be available in the future...
If you do use the sideloader, i recommend: https://github.com/ponces/treble_build_pe/releases/tag/v412-plus and https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/ for the latest android 12l/12.1
Click to expand...
Click to collapse
Thank you for the responce but to use gsi roms don't you need a vendor file to flash?
PATHJUK said:
Thank you for the responce but to use gsi roms don't you need a vendor file to flash?
Click to expand...
Click to collapse
I've flashed the pixel experience gsi ROM on a different device without the use of a vendor file
TheYellowRay said:
I've flashed the pixel experience gsi ROM on a different device without the use of a vendor file
Click to expand...
Click to collapse
hello, will it work on one ui4.1?
oli231 said:
hello, will it work on one ui4.1?
Click to expand...
Click to collapse
What do you mean?
TheYellowRay said:
What do you mean?
Click to expand...
Click to collapse
Exaclty How to Flash this
oli231 said:
Exaclty How to Flash this
Click to expand...
Click to collapse
You don't need to because it's already rolling out as a software update for this device
One UI 4.1 update rolling out to the Galaxy A52s 5G, Galaxy A71 5G, and Galaxy S20 FE 4G
Samsung is rolling out the stable One UI 4.1 update to the Galaxy A52s 5G, Galaxy A71 5G, and Galaxy S20 FE 4G.
www.xda-developers.com
TheYellowRay said:
At the moment there aren't any custom recoveries for this device, as a result there are no custom ROMS available for flashing.
As for GSI's, if you have your bootloader unlocked you could use this GSI sideloader: github.com/VegaBobo/DSU-Sideloader
However, I am currently in the process of building a TWRP for this device, so perhaps custom ROM's will be available in the future...
If you do use the sideloader, i recommend: https://github.com/ponces/treble_build_pe/releases/tag/v412-plus and https://sourceforge.net/projects/andyyan-gsi/files/lineage-19.x/ for the latest android 12l/12.
Click to expand...
Click to collapse
Do you know when it would be ready?
I am having an S20+ Ultra KSA (Saudi Arabian) variant. Since my specific model's latest android 13 hasn't been released, I am going for the UAE variant's Android 13 ROM. My question is that has the root for SM-G986B running android 13 been released or not yet using MAGISK ?
If you have G988B (Exynos) there should be no prob with Magisk. There are some probs with Snapdragons.
Yes. My phone variant is the international model with EXYNOS CPU. The model is SM-G986B. But there is a catch. Last year when Android 12 was released, the most recent versions of MAGISK at that time were not successfully patching the AP file of the Android 12 ROM. I read it on many forums and I also tried it myself 3 times. Finally JOHN WU of MAGISK had to re-release a new version of MAGISK with some additional modifications in it for rooting the Android 12 AP file. I am wondering if I am going to face such an issue again. What are your thoughts?
Easiest way is to install custom ROM - Beyond, Unbound, Ambasadii... I cannot say if patching AP from official sams. ROM works. You have to try :-(
noob_coder said:
I am having an S20+ Ultra KSA (Saudi Arabian) variant. Since my specific model's latest android 13 hasn't been released, I am going for the UAE variant's Android 13 ROM. My question is that has the root for SM-G986B running android 13 been released or not yet using MAGISK ?
Click to expand...
Click to collapse
Flash desired A13 fw and root it...
https://forum.xda-developers.com/t/...pgrade-firmware.4079353/page-26#post-87722259
i've got an a50 that i want to install TWRP on so i won't have to use the abomination that download mode is. i've unlocked bootloader, yet when i try to flash the TWRP .tar in odin it fails and the phone gives the following error code: "Only officially released binaries are allowed to be flashed(RECOVERY)"
although this is the first time i try flashing stuff on a samsung so you can consider me a newbie, i've got experience with fastboot on others so it must be something i glanced over.
cuz see, when i unlock the bootloader of other phones they let me flash onto them, unlike this one. if you could redirect me to a post with a solution or something that would be very much appreciated!
If you are on the latest official build, then The latest official build (last official Update from samsung) won't allow the twrp to be installed.
Use previous build to install twrp.
Sharath Mane said:
If you are on the latest official build, then The latest official build (last official Update from samsung) won't allow the twrp to be installed.
Use previous build to install twrp.
Click to expand...
Click to collapse
wdym older build? flash an older oneui or use older odin, cuz odin is old enough already.
Which oneui build you are using? January ?
Dowgrade to october build.
Join telegram group (Samsung galaxy A50 official) for having better assistance.
Only officially released binaries are allowed to be flashed
Click to expand...
Click to collapse
This remembers me on my SM-A202F Adventure...
Seems "buggy" Bootloaders... in my case sboot.bin as SM-A202F Exynos...
I was able to fix this "phenomenon" with other Firmware...
Best Regards
Sharath Mane said:
Which oneui build you are using? January ?
Dowgrade to october build.
Click to expand...
Click to collapse
can you point me to a site for downloading the october build? furthermore, my plans are to do whatever it takes to get twrp onto it and just flash the unofficial a50 port of lineageos (+official gapps) and debloat with the permission of the owner of the phone. any problems to look at for in the future (seeing that you're a senior here)?
If SM-A505F is your device...
Look here for official collection of Firmware:
Samsung Galaxy A50 Firmware Download SM-A505F Free Download
Samsung Galaxy A50 Firmware Download SM-A505F Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
Otherwise replace SM-A505F with your Model Name...
Best Regards
pKalmam said:
can you point me to a site for downloading the october build? furthermore, my plans are to do whatever it takes to get twrp onto it and just flash the unofficial a50 port of lineageos (+official gapps) and debloat with the permission of the owner of the phone. any problems to look at for in the future (seeing that you're a senior here)?
You can proceed.
The problems you may get with FOD, VoLTE. Some operators like Jio completely depend on volte . Without volte we can not make calls and receive messages. Only internet Anwould work.
No aosp rom able to make work volte. For now, volte works only on oneui roms for a50.
Click to expand...
Click to collapse
so if i'm reading this correctly, the device won't be able to make calls if i don't use oneui?
pKalmam said:
so if i'm reading this correctly, the device won't be able to make calls if i don't use oneui?
Click to expand...
Click to collapse
You can make calls, just not through LTE (4G) or that's what I know
fran6325 said:
You can make calls, just not through LTE (4G) or that's what I know
Click to expand...
Click to collapse
aight thanks i'll just remove the samsung bloatware from oneui and stick with it then