Related
dear freinds
I have been given a XDA2 that is dead ,but can enter only usb mode.
So i tried to download 02 UK FINAL 172181-final
but gave 'country error ' 0.0.111
so i downloaded himaupgreadeeut.exe
but when i try to upgrade it says
'
Error 103 rom image not found.
please can someone advise what to do or how to fix.
Thanks
Martin
OK i have manged to update this by putting the hacked version into same folder and have done a successfull rom upgrade and starts up as I MATE
But handset resets itself after 5 minutes.
i have again tried to update to the 02 UK FINAL and now it says
country error N -8-1-1-1
PLEASE help
use different upgrader
hi thee are two himaupgraders one is himaupgrateut and the other is himaupgradeut_noid this doesnt need country code etc
Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.
[email protected] said:
Hello everyone,
i bought the SM-P607T during my deployment in Afghanistan over Ebay USA . Spending my time there i tested the device and installed all updates etc. Back in Germany just my wife used it. Some weeks ago i noticed that an update to Lollipop should be avaible so i took the device to bring it up to date and i noticed some problems.
(Please note that i am just a noobie to flashing and rooting android and just follow guides to get to my goal.)
1. Device only loading while shut down. (After rooting and installation of TWRP it strangely started to load while on again even on PC USB connection)
2. Its not possible to connect the device with any PC.
3. OTA updates stop at around 27% and fail (KitKat 4.4.4)
[In TWRP shown
"E: Error executing updater binary in zip /data/fota/update.zip
E: Error installing zip file /data/fota/update.zip"]
Strange enough that the update info shown in android is Chinese Version
Tried to get some support with Samsung Europe but unfortunately they say US device US problem......
So what did i do in the meantime
1. Tried different loading devices frome Samsung and 3rd party companys. No changes.
2. Tried several different data cables to connect to 4 different PC. Even the one wich worked good with my Honor7 or the Galasy S4 mini dont do with the 607
3. My last try to fix this problem was to change the USB charging dock completely. Also didn´t change anything.
4. Now the step where i am currently stuck. I managed to root the device and install TWRP(v2.8.7.0) . Now tried to install Version P607TUVUBOI2 via SD Card.
Just followed diffenrent Guides on youtube and forums but im stuck at this.
Here is the message i got in TWRP recovery:
"Installing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
Checking for MD5 file....
Skipping MD5 check : no MD5 file found
Error flashing /external_sd/1/TMB-P607TUVUBOI2-20510930112901.zip
updating partition details......
Checked the *.zip on my PC there was just this file in: P607TUVUBOI2_P607TTMB1BOI2_P607TUVUBOI2_HOME.tar.md5
Downloaded the file from a different source again with same result
It would be very nice if someone is capable to help me with this and give me a hint what i possibly did wrong (Please do not mention not to buy in the US). For me it doesnt matter if i got a rooted or not routed version to install my main goal is to get rid of 4.4.2 . The problem with the not working USB connection is the biggest show stopper for me.
Click to expand...
Click to collapse
I really confused about your description? you using twrp to flash a .zip rom? then you mentioned about .md5 rom on your pc? how did you flash? With .md5 rom you need to use Odin to flash. Can you boot into download mode (hold down volume down + Home buttons then press power button)? If you able to boot to download mode, your pc should able to see the device and you would use Odin to flash the .md5 rom from your pc to the device. Also where did you download the .zip rom?
I have a stock unrooted N7100. I was notified of a software update yesterday, and chose to install it. The phone rebooted, got to 25%, then displayed a dead Android with the message "Error", and rebooted. If I go to the Software Update screen I get this message:
"Failed to update firmware. Try again using PC software (Kies) or visit a Samsung service centre"
The phone is currently running Android 4.4.2 - build KOT49H.N7100XXUFNE1.
Has anyone else encountered this? If so, did you have any luck using Kies?
I've tried to install Kies on my Acer Switch 10V Windows 10 laptop and got this error:
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command line sxstrace.exe tool for more detail."
???
itm said:
I've tried to install Kies on my Acer Switch 10V Windows 10 laptop and got this error:
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command line sxstrace.exe tool for more detail."
???
Click to expand...
Click to collapse
download the latest firmware for N7100 from sammobile.com or samsung-firmware.org and flash it with Odin application for PC while putting the phone into download mode..
no need for kies.
after trying to install PCT-L29 10.0.0.172 (C432E10R3P4) [Dload Method] I can't get out of this situation, "your device has loaded a different operating system"
did anyone happen? what can I do? or nothing? thanks
Flash the 171 and not 172, see this topic: https://forum.xda-developers.com/honor-view-20/development/stockroms-t3955026
Best Regards,
Toetje
Sadly you didn't read the warnings that you cannot upgrade to 10 with dload method and you have bricked your device. And there is 99% chance that you wont get it back. At least for now.
You'll need to wait for global android 10 release for view 20 and hope that somehow or someone will figure out working solution to upgrade with dload method. If not, sadly your phone is gone. (some user already took the device to huawei service centre and only sollution was changing the motherboard, it is not covered by warranty, so it is expensive.)
SOLVED
cheers SOLVED for those who were in my situation you should know that I installed the PCT-L29 10.0.0.171 (C432E10R3P4) version following the dload Force Upgrade method but you have to turn on the device only with the volume up and power on keys and it is reset screen from OTG Stick or Adapter C to A with USB Stick. :victory:
looneylv said:
Sadly you didn't read the warnings that you cannot upgrade to 10 with dload method and you have bricked your device. And there is 99% chance that you wont get it back. At least for now.
You'll need to wait for global android 10 release for view 20 and hope that somehow or someone will figure out working solution to upgrade with dload method. If not, sadly your phone is gone. (some user already took the device to huawei service centre and only sollution was changing the motherboard, it is not covered by warranty, so it is expensive.)
Click to expand...
Click to collapse
This is not true, the dload method works just fine for 171, however we cannot upgrade using hstool/hisuite.
Best Regards,
Facing same problem
ofleda7 said:
cheers SOLVED for those who were in my situation you should know that I installed the PCT-L29 10.0.0.171 (C432E10R3P4) version following the dload Force Upgrade method but you have to turn on the device only with the volume up and power on keys and it is reset screen from OTG Stick or Adapter C to A with USB Stick. :victory:
Click to expand...
Click to collapse
Hi mate,
I'm facing the same problem right now, after my try to update it manually to Android 10.
After turning on its showing me thread: help "your device has loaded a different operating system"
And don't know how to fix it. When I try to flash it in the update mode with a dload file on a sd card, it stops installing after 5%
I really dont know what to do
Same problem here
Binban88 said:
Hi mate,
I'm facing the same problem right now, after my try to update it manually to Android 10.
After turning on its showing me thread: help "your device has loaded a different operating system"
And don't know how to fix it. When I try to flash it in the update mode with a dload file on a sd card, it stops installing after 5%
I really dont know what to do
Click to expand...
Click to collapse
The same goes here, I successfully updated my Honor V20 phone to "Huawei Honor View 20 PCT-L29 hw eea HLRCF Princeton-L29D 10.0.0.195" and now my phone is a vegetable and saying "your device has loaded a different operating system". Any solution? I think I just burnt 400 dollars.
My old version was PCT-L29 9.0.1.169(C636E1R2P1).
Se me bloqueo un p30 pro VOG-L04 y solo sube modo eRecovery, favor ayudarme con la solucion
Hello,
First of all, I'm sorry if I'm not in the right forum, but on the Mate 20 Lite forums, I'm not getting any responds...
I have a Huawei Mate 20 Lite, SNE-LX1 C432
I upgraded to EMUI 10 using the sd card update method a while ago, and ever since when I boot the phone "your device has loaded a different operating system" shows up.
I searched every thread I could, even this one, and tried a lot of things, but I just can't fix it...
Every time I download a firmware for the SNE-LX1 C432 and unzip it, I always get the SNE-LO1 cust file and preload file, but I can't find the SNE-LX1 cust file and preload file anywhere.
Does anyone know how to get the right cust file and preload file?
Any help is appreciated...
Thanks
your device has loaded a different operating system
i dont know my old cust number please help i just know PCT-L29
Hi,
I have p30 lite, Mar-lx1m(c185e2r2) with wrong operating system, please assist
UNBRICK BOOTLOADER LOCKED/UNLOCKED HUAWEI P20Requirements
HISuite Proxy
HISuite
Huawei Firmware Finder (Team MT)
Bricked Device (Locked or Unlocked doesn't matter)
Before You Start
This Guide is for Soft Bricked devices. (Phone should have a working Fastboot)
Bootloader Locked or Unlocked doesnt matter.
Check your Model No. written on back of your phone. Its either EML-L09 or EML-L29. You must Find and Flash Right links for your Model Number from FirmwareFinder, Country Code i.e. C55, C109, C782 etc. don't matter so Flash whichever one you like.
If your device bricked beacuse it failed on EMUI 10 update, make sure to Flash EMUI 10 CUST, PRELOAD & BASE Package otherwise it will fail.
Do this at your own Risk.
How to
Install latest version of HISuite and don't run it.
Open HISuite-Proxy as administrator and click on httpcomponent.dll, it will automatically search for httpcomponent.dll located usually in C:/Program Files(x86)/HiSuite and let the tool patch it.
Find your BASE, CUST, and PRELOAD packages on FirmwareFinder, they are needed to perform a system recovery and then insert their links into their respective textboxes in HiSuite-Proxy.
I filled these for EML-L09, just an example for you
Code:
[url]http://update.dbankcdn.com/TDS/data/files/p3/s15/G5422/g1755/v407185/f1/full/changelog_base.xml[/url] EML-LGRP2-OVS 10.0.0.167
[url]http://update.dbankcdn.com/TDS/data/files/p3/s15/G5422/g1755/v401513/f1/full/changelog_cust_ti_it.xml[/url] EML-L09-CUST 10.0.0.8(C55)
[url]http://update.dbankcdn.com/TDS/data/files/p3/s15/G5422/g1755/v401526/f1/full/changelog_preload_ti_it_R1.xml[/url] EML-L09-PRELOAD 10.0.0.3(C55R1)
Select "Recovery OS" in HISuite Proxy.
Tick CUST PKG & Preloaded PKG Boxes in HISuite Proxy.
Make sure you don't close HISuite-Proxy throughout the entire process.
Open
Code:
C:/Users/yourusername/AppData/Local/HiSuite/UpdateDogDev/HiSuiteConfig.xml
and add an entry for your phone model if there isnt like this
Add your phone model below <REGION name="Default"> and <REGION name="China">
Code:
<rule type="EML-L09" cnName="HUAWEI P20" enName="EML-L09" option="" ></rule>
<rule type="EML-L09" cnName="荣耀 P20全网通" enName="HUAWEI P20" option="" ></rule>
Launch HISuite & Set HISuite to use a proxy in Settings and use IP: 127.0.0.1 and Port: 7777 as HISuite-Proxy says.
Get phone into Fastboot mode ( Power it off, then press power key + volume down for several seconds ) Connect it to PC by USB.
Click System Recovery in HISuite and it will hopefully start recovering your Phone.
Thanks to
@nomone for the Guide.
@IProfessor for the HISuite Proxy.
Team MT for FirmwareFinder.
Well done buddy, thanks for making this guide, keep it up!
Hi Suit gives me an info that my phone does not support system recovery is there anything that i can do?
Hi there @uzairabdulmajeed
I've followed all your steps but unfortunately, it doesn't work. After setting up HiSuite-Proxy, enabling my phone model on HiSuiteConfig.XML and pointing HiSuite to proxy 127.0.0.1, port: 7777, once I click System Recovery, and finally Recover, it has thrown an error: "No Internet connection. Please check your network settings". With removing the proxy and port on HiSuite I just got: "No recovery packages for your phone model".
Any idea? I really messed up with my phone and I need to recover it somehow
dabo2100 said:
Hi there @uzairabdulmajeed
I've followed all your steps but unfortunately, it doesn't work. After setting up HiSuite-Proxy, enabling my phone model on HiSuiteConfig.XML and pointing HiSuite to proxy 127.0.0.1, port: 7777, once I click System Recovery, and finally Recover, it has thrown an error: "No Internet connection. Please check your network settings". With removing the proxy and port on HiSuite I just got: "No recovery packages for your phone model".
Any idea? I really messed up with my phone and I need to recover it somehow
Click to expand...
Click to collapse
It’s related to v11 of HiSuite Just use version 10.x from Here
Full list of HiSuite versions: Full list
Many thanks to
@uzairabdulmajeed @nomone and @IProfessor for all the hard work. The above steps do work with the sidenote that the latest HiSuite version 11.x will fail with that "No Internet connection". so maybe a small notice/update to the OP will help others.
My P20 bricked after EMUI10 OTA Update...
I have tried the method here, with RecoveryOS option Hisuite didn't find any Recovery package, if I choose NormalOS, it runs and downloads all three zips, but failed in the step flash Recovery.
Can anyone help me? Thx.
Hi sorry for bringing this post back but is there other way I could unbrick my Huawei P20? I tried this method but failed, it says after clicking recover, "This device device is not supported for system recovery" something like that and the logs in HiSuite have messages like "FAILED (command write failed (Unknown error))\r\nfinished. total time: 5.003s\r\n[tid=18000]]]]" . Maybe there's another way for? This is a locked bootloader Huawei P20 (EML-L29-C636). Hope you can help me or someone could. Thank you.
is it possible to change my p30 pro single sim (VOG-L09) to p30 pro dual sim (VOG-L29) through hisuite proxy?
Possible to flash the EML-L09 EMUI10 Firmware on EML-L29?
iCrop said:
Possible to flash the EML-L09 EMUI10 Firmware on EML-L29?
Click to expand...
Click to collapse
Works but you will lose Safetynet pass, google pay will not work
You lose OTA updates too, you will have to always update using hisuite proxy.
Thats not a problem for Ota updates, Google pay and safetynet at least the phone will work