Hi everyone,
i tried to change my csc via the sdb method but my computer cant connect to the watch (the rsa key ask ON THE WATCH won't show up)
any help would be apreciated.
watch active 2(070C)
SM R820
ONE UI WATCH ver 1.5
R820XXU1BTA1
Related
Hi, i have a gear watch r800 ITV CSC. In recent days an update has been released with the 4.0.0.7 system. I had the 4.0.0.6 system and I changed the CSC setting to XAR. I got the new update but now the command launch_app csc-manager.csc-pre-configuration not work. Sdb find the wear and I can navigate with sub shell but when I send the command I have the following message: launch_app csc-manager.csc-pre-configuration ... successfully launched but in the gear not appear nothing.
Have solution?I have tried various versions of sdb.
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
adfree said:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
Click to expand...
Click to collapse
this method downgrade my gear?
mago988 said:
this method downgrade my gear?
Click to expand...
Click to collapse
I'm also curious how to change CSC on 4.0.0.7
works like a charm with Samsung pay!!!!:good:
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone can point me to right direction to get the required binaries ?
Device Details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
Hello, im from VietNam, Im using Samsung galaxy watch version 42mm(bluetooth):
- tizen: 4.0.0.0,
- version sofware: R810XXU1ARH3
But im do not receive any updates when check in Galaxy Wearable app. Anyone please tell me, how to update from tizen 4.0.0.0 to 4.0.0.7, by anyway, OTA, or manual via Ordin .... anyway
Thanks.
Hi, I'm searching for the R815FXXU1FSL3 odin update file (4.0.0.7, OXA) for the galaxy watch. I wanted to change the region to ITV (italy) and I already downgraded to 4.0.0.4 and managed to change it via the old sdb method. Unfortunately the LTE 42mm model was never sold in italy (only the 46mm LTE), so it won't auto update to the latest 4.0.0.7 firmware (the watch is originally from germany). So the only way i can update to 4.0.0.7 while retaining samsung pay is to have the said file.
If someone knows how to get it or has a link please let me know.
Could I perhaps flash the 46mm LTE firmware?
Has anyone ever received updates on this watch? Me in 2 years, I only had 1.
Hi guys,
I want to change my GWA2 40mm LTE (Unlocked) US (R835U) Tizen 5.5.0.1 CSC to something working in Canada. In the first step, I need the firmware files. I appreciate it if someone could share them with me and other users. An expert member told me that I need the following files:
COMBINATION-FT55_R835USQU1ATK1 (https://easy-firmware.com/index.php?a=downloads&b=file&id=313912)
or
COMBINATION-FT55_R835USQU1ATJ1 (https://easy-firmware.com/index.php?a=downloads&b=file&id=308035)
I'm also not sure whether I will need the "R835FXXU1BTJ1_Tizen_4File_Canada (OYV)" as well or not later. (https://easy-firmware.com/index.php?a=downloads&b=file&id=327323)
Thank you.
Combination firmware FT55 for Tizen 5.5...
This is "mandatory" to have full access to device for lowest Security...
Bootloader sboot.bin is protected... and mandatory in the chain of trust in FOTA chain blabla self check blabla Security crap bla bla...
Simple visual check is in Download Mode aka Odin Mode Screen...
Look at Photo as example:
Galaxy Watch Active 2 44mm SM-R820 Odin Stuck
Hi, I have a SM-R820 and for mistake I flashed a incorret firmware (SM-R830) and now my watch it's bricked (?), It will allow me tho se the boot menu but all the options take me to the same screen, so I can't use the Download wireless again to...
forum.xda-developers.com
Product Name you should see SM-R835US instead SM-R835FS
To have chance to full convert... your goal is also to replace sboot.bin...
To see as final result:
SM-R835FS
Then chance to have valid FOTA chain for updates over the air...
Combination Firmware is step 1.
Step 2...
If device is still allive... after FT55 Flashing attempt...
You need Stock Firmware for Region with Cannada...
http://fota-cloud-dn.ospserver.net/firmware/XAC/SM-R835F/version.xml
I hope XAC was for Cannada...
So you see Region OYV
R835FXXU1CUA5/R835FOYV1CUA5/R835FXXU1CUA5
Best Regards
adfree said:
Combination firmware FT55 for Tizen 5.5...
This is "mandatory" to have full access to device for lowest Security...
Bootloader sboot.bin is protected... and mandatory in the chain of trust in FOTA chain blabla self check blabla Security crap bla bla...
Simple visual check is in Download Mode aka Odin Mode Screen...
Look at Photo as example:
Galaxy Watch Active 2 44mm SM-R820 Odin Stuck
Hi, I have a SM-R820 and for mistake I flashed a incorret firmware (SM-R830) and now my watch it's bricked (?), It will allow me tho se the boot menu but all the options take me to the same screen, so I can't use the Download wireless again to...
forum.xda-developers.com
Product Name you should see SM-R835US instead SM-R835FS
To have chance to full convert... your goal is also to replace sboot.bin...
To see as final result:
SM-R835FS
Then chance to have valid FOTA chain for updates over the air...
Combination Firmware is step 1.
Step 2...
If device is still allive... after FT55 Flashing attempt...
You need Stock Firmware for Region with Cannada...
http://fota-cloud-dn.ospserver.net/firmware/XAC/SM-R835F/version.xml
I hope XAC was for Cannada...
So you see Region OYV
R835FXXU1CUA5/R835FOYV1CUA5/R835FXXU1CUA5
Best Regards
Click to expand...
Click to collapse
So if I've understand well, step 1 is finding "COMBINATION-FT55_R835USQU1ATK1".
I attached my watch download screen.
@manikar has installed Canadian firmware on R825U (44mm US) before. I'm not sure how he has done that. His post is on May 2020, so it should be FT40.
Changing cs GWA2 - SM-R825F
Please help me how to change csc in GWA2 SM-R825F. I need to change to Orange Polska (OPV). My watch: AP: R825FXXU1ASI7 CP: R825FXXU1ASI7 CSC: R825FOXA1ASI7
forum.xda-developers.com
netOdin and additonal usefull infos about Flashing are here:
[Tutorial] Downgrade Gear S2 (Sport/Classic) to Pair with iPhone again
Firstly, this is not my tutorial, all I do is translating my Vietnamese brother's work to English. So credit is belong to him haihapc2 (he is here as well) Tools you need: Wifi Odin...
forum.xda-developers.com
And here SDB Tool + additional infos:
Gear S3 Root and Kernel Source! (Android Wear Port Thread)
Hey guys! Some of you might know me from the LG G5 scene, but I have since moved on from there and am hoping to make some progress with the Gear S3 :) After doing some digging and paying zero attention in class today, I came across the kernel...
forum.xda-developers.com
My suggestion for netOdin.
Use Standard Settings!
NO changes...
Combination Firmware is 1 Single File...
You can use AP Box to select...
Stock Firmware for LTE are 4 fileS.
Mandatory to select ALL 4 Files...
Best Regards
Hello guys,
I changed the csc to XAR using sdb and Odin to flash my watch with the older tizen os. And now whenever I try to update my os it tells me that this is the last update found ...
I have the galaxy watch 2018 42 mm model, SM-810
What can I do ?
Thanks in advance,
And best regards,
Alex!
?
Firmware Version on Device?
Easiest way with FULL details... type this code like you would call someone...
*#1234#
Best Regards
Thanks for your fast reply! I somehow managed to have Samsung Pay installed and get the latest Tizen 5.5.0.1 installed! I will share my experience in case someone else is having issues with updating Tizen after downgrading !
Here is how it worked out for me:
First I downgraded my Tizen OS with Odin to the following software:
R810XXU1CSI1 Tizen 4.0.0.4 ( Downloaded from here: https://disk.yandex.ru/d/TPWpD1y1CE6Sig )
Then I used the SDB kit to change my region to XAR. ( You can search how to change the region on your watch in the XDA forum search box ).
Then I googled Samsung Pay watch plug-in apk. ( Downloaded from here: https://www.apkmirror.com/apk/samsung-electronics-co-ltd/samsung-pay-watch-plug-in/ )
Installed it - it showed on my watch and in my Gear App.
So far so good.. but It didnt want to update to Tizen 5. It was stuck on Tizen 4.
So I flashed this firmware with Odin: R810XXU1BSA4 Tizen 4.0.0.1 ( Downloaded from here: https://mega.nz/#!vg8k3AbA!zcUGtSJPzEdo_PKs_8_u0M6evKXfmQysfK4cZHOkJW8 )
And I managed to update the watch with all the updates and Samsung Pay didnt get removed .
P.S. - This is how it worked out FOR ME!! You can try to change the region with the last firmware - it might as well work out for you too !
I hope I helped with my experience. This is firmware only for the SM-R810 watch model! If you flash it on another watch it might get bricked !
And again thanks to @adfree for replying !