Hello guys,
I changed the csc to XAR using sdb and Odin to flash my watch with the older tizen os. And now whenever I try to update my os it tells me that this is the last update found ...
I have the galaxy watch 2018 42 mm model, SM-810
What can I do ?
Thanks in advance,
And best regards,
Alex!
?
Firmware Version on Device?
Easiest way with FULL details... type this code like you would call someone...
*#1234#
Best Regards
Thanks for your fast reply! I somehow managed to have Samsung Pay installed and get the latest Tizen 5.5.0.1 installed! I will share my experience in case someone else is having issues with updating Tizen after downgrading !
Here is how it worked out for me:
First I downgraded my Tizen OS with Odin to the following software:
R810XXU1CSI1 Tizen 4.0.0.4 ( Downloaded from here: https://disk.yandex.ru/d/TPWpD1y1CE6Sig )
Then I used the SDB kit to change my region to XAR. ( You can search how to change the region on your watch in the XDA forum search box ).
Then I googled Samsung Pay watch plug-in apk. ( Downloaded from here: https://www.apkmirror.com/apk/samsung-electronics-co-ltd/samsung-pay-watch-plug-in/ )
Installed it - it showed on my watch and in my Gear App.
So far so good.. but It didnt want to update to Tizen 5. It was stuck on Tizen 4.
So I flashed this firmware with Odin: R810XXU1BSA4 Tizen 4.0.0.1 ( Downloaded from here: https://mega.nz/#!vg8k3AbA!zcUGtSJPzEdo_PKs_8_u0M6evKXfmQysfK4cZHOkJW8 )
And I managed to update the watch with all the updates and Samsung Pay didnt get removed .
P.S. - This is how it worked out FOR ME!! You can try to change the region with the last firmware - it might as well work out for you too !
I hope I helped with my experience. This is firmware only for the SM-R810 watch model! If you flash it on another watch it might get bricked !
And again thanks to @adfree for replying !
Related
Hi, i have a gear watch r800 ITV CSC. In recent days an update has been released with the 4.0.0.7 system. I had the 4.0.0.6 system and I changed the CSC setting to XAR. I got the new update but now the command launch_app csc-manager.csc-pre-configuration not work. Sdb find the wear and I can navigate with sub shell but when I send the command I have the following message: launch_app csc-manager.csc-pre-configuration ... successfully launched but in the gear not appear nothing.
Have solution?I have tried various versions of sdb.
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
adfree said:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
Click to expand...
Click to collapse
this method downgrade my gear?
mago988 said:
this method downgrade my gear?
Click to expand...
Click to collapse
I'm also curious how to change CSC on 4.0.0.7
works like a charm with Samsung pay!!!!:good:
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone can point me to right direction to get the required binaries ?
Device Details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
Hi all can somebody help installing Samsung Pay for India
I connected watch through sdb connect and when i run
command launch_app csc-manager.csc-pre-configuration it says successfully launched but nothing happens on my Galaxy Watch verion R800XXU1DSL1 tizen 4.0.0.7
Used SDBstarterKidv1
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
After downgrade and changing the region to enable Samsung pay.
If I again update to the latest firmware version will the Samsung pay still be there?
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
congusto said:
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
Click to expand...
Click to collapse
i downgraded changed the CSC, now samsung pay is on the watch but it wont open on my phone
I have a same problem too. "successfully launched" but nothing happend
R805FXXUFSK2
SM-R805FZSATMH
The downgrade is it the solution for me ? Which version ?
The downgrade is it the solution for me ? Which version ?
Click to expand...
Click to collapse
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
adfree said:
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
Click to expand...
Click to collapse
My CSC with the magic code is R805FOXA1FSK2
AP: R805FXXU1FSK2
CP: R805FXXU1FSK2
Hi guys, I'm from Brazil, and my FW is the R810XXU1DSL1.
I need to change the csc to ZTO... same problem, nothing happens.
Can some one help me?
What downgrade do I have to do?
You need to downgrade to any firmware older than DSL1 with NetOdin, as described elsewhere on this forum. Then changing the CSC will work.
Hi. I have the same problem. I'm now going to downgrade with the procedure in this topic.
I just have a doubt about which firmware I should use. This are my current info:
Watch: SM-R800
One UI: 1.5
Tizen: 4.0.0.7
Current FW: R800XXU1DSL1
Knox: 2.4.0
Bought on USA
Need to enable Samsung Pay in Brazil (I believe need to be changed to ZTO)
Can someone please which firmware I should try? First and second options?
Thanks.
adfree said:
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
Click to expand...
Click to collapse
On phones, usually downgrading can result in brick.
In the galaxy watch this does not happen can I downgrade to a previous version without fear of it happening?
any update yet guys
i am stuck with tyhe same problem.is there a way solution yet?
Hello,
I try to change my CSC to be able to activate the eSIM and Samnsung Pay,but i'm unable to do that in sdb (it says launch_app csc-manager.csc-pre-configuration that is successful but on my watch it doesn't show the CSC menu).
Is downgrading my only solution and if so , where can i find the firmware because I can't seem to find anything on SamMobile?
Thank you
welcome here I have same problem :crying:
https://forum.xda-developers.com/showpost.php?p=79644543&postcount=1
Here is some Firmware for Downgrade.
@MISU123456
Check this post:
https://forum.xda-developers.com/showpost.php?p=81320451&postcount=7
@yager01
You could try OXA... use ESD8:
Code:
R805FXXU1[B][COLOR="Green"]ESD8[/COLOR][/B]_Tizen_4File_Multi CSC ([B][COLOR="Green"]OXA[/COLOR][/B])
This should be valid for further FOTA update for TMH CSC...
OWN RISK!
netOdin Tool + Infos + Videos are here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Best Regards
adfree said:
https://forum.xda-developers.com/showpost.php?p=79644543&postcount=1
Here is some Firmware for Downgrade.
@MISU123456
Check this post:
https://forum.xda-developers.com/showpost.php?p=81320451&postcount=7
@yager01
You could try OXA... use ESD8:
Code:
R805FXXU1[B][COLOR="Green"]ESD8[/COLOR][/B]_Tizen_4File_Multi CSC ([B][COLOR="Green"]OXA[/COLOR][/B])
This should be valid for further FOTA update for TMH CSC...
OWN RISK!
netOdin Tool + Infos + Videos are here:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Best Regards
Click to expand...
Click to collapse
@adfree
I hope I understand everything good. Now I have a newest CSC with OXA (Open - Open Country code) - *#1234#: My CSC R805FOXA1FSK2
You offer me a downgrade with this : R805FXXU1ESD8
What would be the worst could happen?
What would be the worst could happen?
Click to expand...
Click to collapse
If out of luck...
You can brick your device... something like this is deadly enough:
https://forum.xda-developers.com/smartwatch/gear-s3/wireless-mode-enter-gear-s3-sm-r760-t3710855
And/or Boot loop/cycle...
Repair attempt then require USB cable... Example Video:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
This is why I wrote OWN RISK...
Best Regards
Edit 1.
@MISU123456
to be able to activate the eSIM
Click to expand...
Click to collapse
Be carefully with wrong Firmware...
IMHO you can not change region...OXX OXA... or whatever is on your device...
adfree said:
If out of luck...
You can brick your device... something like this is deadly enough:
https://forum.xda-developers.com/smartwatch/gear-s3/wireless-mode-enter-gear-s3-sm-r760-t3710855
And/or Boot loop/cycle...
Repair attempt then require USB cable... Example Video:
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
This is why I wrote OWN RISK...
Best Regards
Click to expand...
Click to collapse
@adfree
Few days ago I updated with Odin My Note9. I downloaded from the sammobile the actual last firm and made it without problem. I don't understand why bigger the risk with the samsung watch.
I don't understand why bigger the risk with the samsung watch.
Click to expand...
Click to collapse
Phones have USB cable for Emergency Flashing.
Samsung Watches is bigger problem if you kill the """WiFi Security chain"""...
You have not USB cable for easy second attempt.
And the LTE Watches makes more trouble... if you doing something wrong or simple out of luck.
You asked about worst case...
netOdin is not 100 % riskfree.
IMHO:
No risk no fun. :angel:
Best Regards
Downgrade
Hi, I have SM-R805F bought in Czech rep. Can I use these instructions for downgrade my firmware to change my region (I want Samsung Pay)? I have saved my eSIM in my watches now - after flashning it will stay there or will be deleted? Thanks a lot
@ohajo3
Yes you can. Do not reset networks after flash during setup. Esim will stay.
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone or @adfree can point me to right direction to get the right required binaries ?
My device details
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
LTE version.
Can anyone help with the right binary I should use to downgrade?
These are my device details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
LTE version.
Not able to find combination firmware for this version. Not very sure which one I should use.
Thanks in advance.
@madono
You wish to have India INU?
http://fota-cloud-dn.ospserver.net/firmware/INU/SM-R805F/version.test.xml
IMHO seems INU require OXX package...
Here are 2 OXX packages:
https://forum.xda-developers.com/showpost.php?p=79644543&postcount=1
According to DBT list... they are before Tizen 4.0.0.7
So please try these 2 firmwares... with the old method to change CSC...
So IMHO no Combination Firmware required...
Only downgrade...
Best Regards
Edit 1.
Sorry, my fault...
Links expired.
Edit 2.
Oh, totally forgotten...
Latest FTC1 for OXX region is here:
https://forum.xda-developers.com/showpost.php?p=82893207&postcount=55
INU inside this OXX region.
@adfree Thanks for the links! I m downloading it right now. Speed is slow, not sure if I will be able to download it in one go. Is there any expiry for this download link? If I m not able to download today, will try tomorrow again.
Another question for downgrade, do I have to choose all four files , namely, BL, AP, CP, CSC to downgrade?
I have not done a galaxy watch downgrade before so wanted to be sure not to mess it.
I actually wanted to have Samsung Pay and LTE enabled. It was working fine using Australia CSC code but my Phone operator recently changed calling only on VoLTE. So i was not able to receive calls or call anyone. Only internet was working using AU CSC.
Now it seems I have to choose between calling and Samsung Pay. SP is not officially launched on Galaxy Watch in India. Only on smartphone it is allowed. Not sure why.
Thank you once again!
Regards,
madono
Hi @adfree,
I downloaded the firmware from the link. Today was bit hard day at work so not trying to update watch.
Will try it out with fresh mind tomorrow. Just need couple of things cleared before I try it.
1. In firmware download steps, it is mentioned to only use BL, AP, CSC file?
Downloaded rar has 4 files. Is this fine?
And final one this is my current watch status
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
Watch is LTE model.
I m good to go ahead with said firmware?
@adfree please review, don't want to mess this one. I know there is always risk but want to use correct firmware.
Thanks for the help!
@madono
OWN RISK!
Downgrade... OXX
https://www.file-upload.net/download-14218710/R805FXXU1ESE3_OXX.7z.html
Round 1 with netOdin...
ALL 4 files!
BL_R805FXXU1ESE3_usr.tar.md5
AP_R805FXXU1ESE3_usr.tar.md5
CP_R805FXXU1ESE3_CL1125521_QB12612098_SIGNED.tar.md5
CSC_OXX_R805FOXX1ESE3_usr.tar.md5
Look into this CSC change Thread...
Concentrate only on SDB Command stuff...
https://forum.xda-developers.com/showpost.php?p=76077212&postcount=1
If nothing exploded...
Flash all 4 files from FSL4...
Best Regards
adfree said:
@madono
OWN RISK!
Downgrade... OXX
https://www.file-upload.net/download-14218710/R805FXXU1ESE3_OXX.7z.html
Round 1 with netOdin...
ALL 4 files!
BL_R805FXXU1ESE3_usr.tar.md5
AP_R805FXXU1ESE3_usr.tar.md5
CP_R805FXXU1ESE3_CL1125521_QB12612098_SIGNED.tar.md5
CSC_OXX_R805FOXX1ESE3_usr.tar.md5
Look into this CSC change Thread...
Concentrate only on SDB Command stuff...
https://forum.xda-developers.com/showpost.php?p=76077212&postcount=1
If nothing exploded...
Flash all 4 files from FSL4...
Best Regards
Click to expand...
Click to collapse
Hi @adfree I have downloaded files from this link mentioned in your previous post. Is this not valid one?
https://forum.xda-developers.com/showpost.php?p=82893207&postcount=55
@madono
Please concentrate... focus...
IMHO I thought you wish to change CSC...
So IMHO 2 FirmwareS needed...
A
For downgrade to use old SDB Command for CSC change...
B
I gave you latest FSL4 for OXX region...
Now is up to you to manage.
IMHO I gave you all infos + files + links...
Please mercy... I have not unlimited time and energy...
Best Regards
adfree said:
@madono
Please concentrate... focus...
IMHO I thought you wish to change CSC...
So IMHO 2 FirmwareS needed...
A
For downgrade to use old SDB Command for CSC change...
B
I gave you latest FSL4 for OXX region...
Now is up to you to manage.
IMHO I gave you all infos + files + links...
Please mercy... I have not unlimited time and energy...
Best Regards
Click to expand...
Click to collapse
Hi @adfree ,
Sorry for bothering you. I miss understood your previous post.
Thank you for all the help!!
Regards
Hi ,
Finally was able to downgrade to 4.0.0.4 and watch did not explode
This link has 4.0.0.7
https://forum.xda-developers.com/sho...7&postcount=55
After download I was still on 4.0.0.7 and looks like my CSC was still pointing to AU
I used this link to downgrade : https://www.file-upload.net/download...E3_OXX.7z.html
Then SDB command to change CSC from AU to India
Thanks to @adfree
One thing I observed that my eSIM was not reset. I was expecting it will be removed when I downgrade. Looks like it is left alone in this process.
Not sure if there is any way to enable Samsung Pay without changing CSC. Missing SP very much in current time.
Regards,
adfree said:
@madono
Please concentrate... focus...
IMHO I thought you wish to change CSC...
So IMHO 2 FirmwareS needed...
A
For downgrade to use old SDB Command for CSC change...
B
I gave you latest FSL4 for OXX region...
Now is up to you to manage.
IMHO I gave you all infos + files + links...
Please mercy... I have not unlimited time and energy...
Best Regards
Click to expand...
Click to collapse
@adfree
Did I correct understand:
To change CSC by old method (with SDB) it is needed:
1. Flash with Odin all 4 files (early Firmware)
2. Change CSC with SDB
3. Install Samsung Pay
4. Flash with Odin all 4 files (latest firmware) back to FSL4
and Samsung Pay will stay?
Hi,
I got SGWA1 SM-R500 already with the following SW versions:
Tizen 4.0.0.7
One UI 1.5
SW: R500XXU1DSL1 / SM-R500NZDAXEZ
Knox: 2.4.0
SE for Tizen: 2.0.0
TIMA: 3.0.0
I searched a lot in this forum for the last 3 days but wasn't able to find all answers I'm searching for. So I would really appreciate if someone can give me a complete set of answers:
I want to use Samsung Pay, which is not available in my region - the Czech Republic. I understood that I need to change the region and probably it will be more complicated because of newest firmware version.
So:
What is the best region for the most up-to-date FW version with possibly all functionality. XAR-USA?
How do I do it? How do I change my region? Downgrade to ASAD version or trying to fiddle with "combination FW"?
Is there a way how to change the region but still receive future OTA or once I flash the firmware with Odin, there is no way back to OTA?
PLEASE, if possible try to describe all steps as detailed as possible.
Thanks a lot, this forum and people here are truly giving our devices superpowers!
I am interested too, how to change region on 4.0.0.7?
I have a little problem with my active 1 after the battery change there was an automatic update in which in the middle of the process the battery ran out and I entered the booting mode and did the recovery then my watch is out of firmware can someone help me please
Hello everybody!
I need the firmware R805FXXU1ESI1 to downgrade and change the CSC of my Galaxy Watch, but unfortunately I only find it in Easy-firmware, and I don't have an account there:
R805FXXU1ESI1 Tizen 3File | Easy Firmware
easy-firmware.com
I need this version exactly, because my region is ZTO and I need this base firmware (OWO).
Thank you very much in advance.
Hi, Maybe some info in this thread ...
New update sm-r805f
Hello NEW UPDATE FOR R805F To update with netOdin see here how to do it https://forum.xda-developers.com/showthread.php?p=78800094 EF FILE EXTRACTOR https://mega.nz/file/40NQ3YaL#JL5cq46ErZFoSFB-fxMmOsKBd44VDcMgUtOl8Ji8hrA 0. This process...
forum.xda-developers.com
I'm planning to downgrade too to activate samsung pay somehow. (EU region) I'll keep searching to see what can be done.
galaxys said:
Hi, Maybe some info in this thread ...
New update sm-r805f
Hello NEW UPDATE FOR R805F To update with netOdin see here how to do it https://forum.xda-developers.com/showthread.php?p=78800094 EF FILE EXTRACTOR https://mega.nz/file/40NQ3YaL#JL5cq46ErZFoSFB-fxMmOsKBd44VDcMgUtOl8Ji8hrA 0. This process...
forum.xda-developers.com
Click to expand...
Click to collapse
As per my understanding, I have to follow these steps:
1. Flash combinational firmware
2. Change CSC using SDB commands
3. Flash stock firmware
4. Install samsung pay
5. Repeat steps 1-3 to change CSC back to the original so that i retain mobile connectivity
@galaxys I have the same watch model but with Tizen 5.5. Would the same old firmware work with my watch also?
salwan.hemant said:
As per my understanding, I have to follow these steps:
1. Flash combinational firmware
2. Change CSC using SDB commands
3. Flash stock firmware
4. Install samsung pay
5. Repeat steps 1-3 to change CSC back to the original so that i retain mobile connectivity
@galaxys I have the same watch model but with Tizen 5.5. Would the same old firmware work with my watch also?
Click to expand...
Click to collapse
Hi, I don't think it would work with Tizen 5.5 but haven't heard of anyone trying it....
galaxys said:
Hi, I don't think it would work with Tizen 5.5 but haven't heard of anyone trying it....
Click to expand...
Click to collapse
Thanks for your early reply otherwise i was thinking of giving it a try.
BTW i found that dialing *#272*IMEI# also change the CSC but did not try because people here are going for flashing firmware due to some reason only. Do you know why shouldn't it work on galaxy watch?
salwan.hemant said:
Thanks for your early reply otherwise i was thinking of giving it a try.
BTW i found that dialing *#272*IMEI# also change the CSC but did not try because people here are going for flashing firmware due to some reason only. Do you know why shouldn't it work on galaxy watch?
Click to expand...
Click to collapse
It may be a Samsung thing for not working, but haven't played with changing CSC...
@galaxys @adfree I could not find Tizen 5.5.0.1 firmware for SM-R805F anywhere on the internet. It was released on 15th march 2021.
Is it not available yet? I am waiting for it...