hello
first i flashed lineage os 17 but after have some troobles with the data connection i decided to flash rom stock and root him but after what my A70 wich have no more battery it reboot in download mode everytime.
what should i do?
sorry for my bad english, im french
jango974 said:
hello
first i flashed lineage os 17 but after have some troobles with the data connection i decided to flash rom stock and root him but after what my A70 wich have no more battery it reboot in download mode everytime.
what should i do?
sorry for my bad english, im french
Click to expand...
Click to collapse
reboot your device in download mode and flash the stock firmware again, if you need root install TWRP and root using magisk 20.4
redémarre ton appareil en mode téléchargement et flash le firmware original , si tu veux rooter ton appareil flash TWRP et root avec magisk 20.4
Related
A little knowledge is dangerous. I have a tab 3 sm-t217s that I wanted to root and use a custom rom. I installed twrp recovery and flashed a cm rom but I really didn't care for it. I decided to flash a differentry rom and when I wiped, without thinking, I wiped everything. I can't boot to recovery but I can get into download mode. I assume I wiped everything so what can I do now?
Thanks
You must download stock ROM for your model, and try with Odin : like here http://forum.xda-developers.com/showthread.php?t=2604681
Envoyé de mon SM-T310 en utilisant Tapatalk
Hi... I´m in Android One 8.1 Stock, Magisk 18.1 with TWRP 3.2.3-0 (No SD support)
I installed these TWRP flashing via adb and flash in TWRP the installer (With USB-OTG)
Now, ¿How to upgrade to TWRP 3.3.0-0 (twrp-daisy-3.3.0-0-offain)?
I see twrp-daisy-3.3.0-0-offain.img and twrp-installer-daisy-3.3.0-0-offain.zip
¿What is the process to upgrade the TWRP?
In other devices only flash the img in TWRP to boot, but in this device i don´t know...
Regards...
leechgid said:
Hi... I´m in Android One 8.1 Stock, Magisk 18.1 with TWRP 3.2.3-0 (No SD support)
I installed these TWRP flashing via adb and flash in TWRP the installer (With USB-OTG)
Now, ¿How to upgrade to TWRP 3.3.0-0 (twrp-daisy-3.3.0-0-offain)?
I see twrp-daisy-3.3.0-0-offain.img and twrp-installer-daisy-3.3.0-0-offain.zip
¿What is the process to upgrade the TWRP?
In other devices only flash the img in TWRP to boot, but in this device i don´t know...
Regards...
Click to expand...
Click to collapse
same step as u install the old twrp:
boot twrp.img with fastboot
flahs twrp installer.zip
I have twrp whit sd fix on mi mi A2 Lite whit Android pie on v10.07.0
To install twrp, flash the zip from twrp.
You onky need to boot twrp from fastboot the first time so you can do that.
Can't just flash an image because twrp lives on the boot partition.
That is not the right section to ask that...
soul401 said:
I have twrp whit sd fix on mi mi A2 Lite whit Android pie on v10.07.0
Click to expand...
Click to collapse
How did you do that ? Is there an stable version for pie ?
Hello, following the installation of twrp on my Redmi Note 8T I find myself with a problem! The installation goes well then on restart I access twrp! Then when the system starts I switch to the original recovery.
How to correct this problem?
The version I installed is the one on the link below because the official version after several downloads was impossible to flash "cannot load" in error message
https://androidfilehost.com/?fid=4349826312261645224
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Kikatdroid said:
Hello, following the installation of twrp on my Redmi Note 8T I find myself with a problem! The installation goes well then on restart I access twrp! Then when the system starts I switch to the original recovery.
How to correct this problem?
The version I installed is the one on the link below because the official version after several downloads was impossible to flash "cannot load" in error message
https://androidfilehost.com/?fid=4349826312261645224
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Click to expand...
Click to collapse
You need flash vbmeta
Extract and flash it with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Also, use the latest version of twrp, its 3.3.1-10 unofficial by mauronofrio
Thank you very much, Twrp works perfectly [emoji6]
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
arshy said:
You need flash vbmeta
Extract and flash it with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Also, use the latest version of twrp, its 3.3.1-10 unofficial by mauronofrio
Click to expand...
Click to collapse
can i do this the 1st time flashing twrp (to prevent problems) ?
I installed twrp and then restart on the recovery (twrp) then I flash the fix offered!
Currently twrp and Magisk runs perfectly on my Redmi Note 8T.
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Kikatdroid said:
Thank you very much, Twrp works perfectly [emoji6]
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Click to expand...
Click to collapse
Np, nice to hear that.
loopypalm said:
can i do this the 1st time flashing twrp (to prevent problems) ?
Click to expand...
Click to collapse
Yes, that's what I did when I installing twrp for the first time. Basically its just disable dm-verity and boot verification so twrp will stick and prevent getting system destroyed if you flashing magisk etc
arshy said:
You need flash vbmeta
Extract and flash it with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Also, use the latest version of twrp, its 3.3.1-10 unofficial by mauronofrio
Click to expand...
Click to collapse
@arshy
When first I used the latest version of twrp,( 3.3.1-10 unofficial by mauronofrio) do I also need to use this patch (vbmeta)
Does version TWRP unofficial by mauronofrio already protect against this problem?
Yo, i'm on A11 rom and i get an upd, twrp can't decrypt data so i can't install via ota, my problem is if i install the upd can i only flash it or i have to flash all the stuff(rom, gapps, magisk)?
Sorry my bad english, tried w/o traslate
Have a nice day
Hello,
I had installed the xiaomi.eu rom on my Xiaomi mi 10t but I didn't like it anymore. I looked for a rom with more customization options. I found AncientOs and dotOs. I installed the first rom but my phone kept restarting in flashboot mode (I tried to format it, without success). I tried the second rom and this time I restarted again and again in recovery mode . So I reinstalled the Xiaomi.eu rom and it worked. Now, I'm back to the starting point. I would like to successfully install another rom than xiaomi.eu.
Does anyone have a solution?
Thanks in advance
Translated with www.DeepL.com/Translator (free version)
Noah3306 said:
Hello,
I had installed the xiaomi.eu rom on my Xiaomi mi 10t but I didn't like it anymore. I looked for a rom with more customization options. I found AncientOs and dotOs. I installed the first rom but my phone kept restarting in flashboot mode (I tried to format it, without success). I tried the second rom and this time I restarted again and again in recovery mode . So I reinstalled the Xiaomi.eu rom and it worked. Now, I'm back to the starting point. I would like to successfully install another rom than xiaomi.eu.
Does anyone have a solution?
Thanks in advance
Translated with www.DeepL.com/Translator (free version)
Click to expand...
Click to collapse
Aosp rom often requires specific firmware. You can flash the firmware with the TWRP/Ofox or with this MIflash.(better).
Format data write yes and reboot Twrp is obligatory if you don't use MIflash.
If there are errors while formatting(red lines) reboot to TWRP and format again.
NOSS8 said:
Aosp rom often requires specific firmware. You can flash the firmware with the TWRP/Ofox or with this MIflash.(better).
Format data write yes and reboot Twrp is obligatory if you don't use MIflash.
If there are errors while formatting(red lines) reboot to TWRP and format again.
Click to expand...
Click to collapse
I am a novice, I hope I have understood well : I have to install the official MIUI firmware then I format the data and then I can flash the AncientOS rom then format again.
Noah3306 said:
I am a novice, I hope I have understood well : I have to install the official MIUI firmware then I format the data and then I can flash the AncientOS rom then format again.
Click to expand...
Click to collapse
Procedure with TWRP/Ofox
1/format data
2/install firmware
3/flash Aosp rom as per OP guidelines
Procedure with MIFLASH
1/Flash Twrp/Ofox
2/format data
3/flash Aosp rom as per OP guidelines
NOSS8 said:
Procédure avec TWRP/Ofox
1/format des données
2/installer le firmware
3/flash Aosp rom selon les directives OP
Click to expand...
Click to collapse
thank you i will try
but first flash your latest Firmware with MI flash, then flash oFox or TWRP and folow these
Procedure with TWRP/Ofox
1/format data
2/install firmware
3/flash Aosp rom as per OP guidelines
Procedure with MIFLASH
1/Flash Twrp/Ofox
2/format data
3/flash Aosp rom as per OP guidelines
tze_vitamin said:
but first flash your latest Firmware with MI flash, then flash oFox or TWRP and folow these
Procedure with TWRP/Ofox
1/format data
2/install firmware
3/flash Aosp rom as per OP guidelines
Procedure with MIFLASH
1/Flash Twrp/Ofox
2/format data
3/flash Aosp rom as per OP guidelines
Click to expand...
Click to collapse
What else can be done with Miflash?
Nothing just flash a firmware
to be able to flash A12 AOSP ROMs , yuo need the latest firmware for your phone or Roms that yo will flash will case bootloop or stuck on logo or have no sound.. so to be able to corectly rom work , first flash last firmware but be awere dont lock bootloader.