Hello, following the installation of twrp on my Redmi Note 8T I find myself with a problem! The installation goes well then on restart I access twrp! Then when the system starts I switch to the original recovery.
How to correct this problem?
The version I installed is the one on the link below because the official version after several downloads was impossible to flash "cannot load" in error message
https://androidfilehost.com/?fid=4349826312261645224
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Kikatdroid said:
Hello, following the installation of twrp on my Redmi Note 8T I find myself with a problem! The installation goes well then on restart I access twrp! Then when the system starts I switch to the original recovery.
How to correct this problem?
The version I installed is the one on the link below because the official version after several downloads was impossible to flash "cannot load" in error message
https://androidfilehost.com/?fid=4349826312261645224
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Click to expand...
Click to collapse
You need flash vbmeta
Extract and flash it with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Also, use the latest version of twrp, its 3.3.1-10 unofficial by mauronofrio
Thank you very much, Twrp works perfectly [emoji6]
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
arshy said:
You need flash vbmeta
Extract and flash it with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Also, use the latest version of twrp, its 3.3.1-10 unofficial by mauronofrio
Click to expand...
Click to collapse
can i do this the 1st time flashing twrp (to prevent problems) ?
I installed twrp and then restart on the recovery (twrp) then I flash the fix offered!
Currently twrp and Magisk runs perfectly on my Redmi Note 8T.
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Kikatdroid said:
Thank you very much, Twrp works perfectly [emoji6]
Envoyé de mon Redmi Note 8T en utilisant Tapatalk
Click to expand...
Click to collapse
Np, nice to hear that.
loopypalm said:
can i do this the 1st time flashing twrp (to prevent problems) ?
Click to expand...
Click to collapse
Yes, that's what I did when I installing twrp for the first time. Basically its just disable dm-verity and boot verification so twrp will stick and prevent getting system destroyed if you flashing magisk etc
arshy said:
You need flash vbmeta
Extract and flash it with this command:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Also, use the latest version of twrp, its 3.3.1-10 unofficial by mauronofrio
Click to expand...
Click to collapse
@arshy
When first I used the latest version of twrp,( 3.3.1-10 unofficial by mauronofrio) do I also need to use this patch (vbmeta)
Does version TWRP unofficial by mauronofrio already protect against this problem?
Related
As the title says: How to turn off updating the stock recovery on Oxygen CMB 3.5.2? Everytime I flashed TWRP and booted into it and then booting in system and booting back in recovery it automatically updates the stock Oneplus recovery. A real pain in the ass because when i want to flash something i always need to flash it again.
Roykooiman said:
As the title says: How to turn off updating the stock recovery on Oxygen CMB 3.5.2? Everytime I flashed TWRP and booted into it and then booting in system and booting back in recovery it automatically updates the stock Oneplus recovery. A real pain in the ass because when i want to flash something i always need to flash it again.
Click to expand...
Click to collapse
Head to this thread ->http://forum.xda-developers.com/oneplus-3/how-to/how-to-dirty-flash-oxygenos-3-5-2-t3462288
it has updater-script.zip in the attachments.
Download it and unzip it,
Open OxygenOS Rom using 7zip or winrar,
goto \META-INF\com\google\android
replace updater-script file.
Dev-T said:
Head to this thread ->http://forum.xda-developers.com/oneplus-3/how-to/how-to-dirty-flash-oxygenos-3-5-2-t3462288
it has updater-script.zip in the attachments.
Download it and unzip it,
Open OxygenOS Rom using 7zip or winrar,
goto \META-INF\com\google\android
replace updater-script file.
Click to expand...
Click to collapse
I already have the modified zip with modified updater script
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Roykooiman said:
I already have the modified zip with modified updater script
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Click to expand...
Click to collapse
you also need the modified twrp. its available on the same thread.
bonham1988 said:
you also need the modified twrp. its available on the same thread.
Click to expand...
Click to collapse
Already have that installed.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Copy the recovery to your internal storage. After flashing the rom, select "install image" in twrp and then flash the recovery image. Reboot. Done.
And if you don't wanna go that way, then flash rom, flash supersu, boot. Install flashify, flash twrp. Done.
zTweaked said:
Copy the recovery to your internal storage. After flashing the rom, select "install image" in twrp and then flash the recovery image. Reboot. Done.
And if you don't wanna go that way, then flash rom, flash supersu, boot. Install flashify, flash twrp. Done.
Click to expand...
Click to collapse
U guys don't get me right? The stock recovery automatically gets updates. For example I flash twrp and boot into it. Then booting into system and then rebooting in recovery again. Then twrp is gone and it boots me into stock recovery again.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Roykooiman said:
U guys don't get me right? The stock recovery automatically gets updates. For example I flash twrp and boot into it. Then booting into system and then rebooting in recovery again. Then twrp is gone and it boots me into stock recovery again.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Click to expand...
Click to collapse
You didn't get me, mate. After flashing the rom don't reboot your phone. Right after flashing the rom via twrp, flash twrp via twrp itself. Idk which part you don't understand because I'm on 3.5.2 with twrp.
Did you try fastboot method to flash TWRP ( fastboot flash recovery twrp-3.0.2-19-oneplus3.img ) ?
Dev-T said:
Did you try fastboot method to flash TWRP ( fastboot flash recovery twrp-3.0.2-19-oneplus3.img ) ?
Click to expand...
Click to collapse
I have flashed it with fastboot. Did the flash command and the boot command.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Roykooiman said:
I have flashed it with fastboot. Did the flash command and the boot command.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Click to expand...
Click to collapse
so after you flash,
did you boot into recovery, rather than booting into OS?
Flash the modified TWRP, once you are in the modified TWRP, flash the normal TWRP, voila, you keep twrp and 3.5.2
Dev-T said:
so after you flash,
did you boot into recovery, rather than booting into OS?
Click to expand...
Click to collapse
I first booted into recovery. I know that if you first boot into OS it replaces it by the stock recovery but this isn't going on here.
Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk
Thanks to Askuccio_DROID for bringing first android pie build to our device.
ANDROID PIE (9) FLASHING INSTRUCTIONS FOR HONOR 6X
These are only flashing instructions for those who failed to boot from rom main thread instructions.
Main thread link
https://forum.xda-developers.com/p8...-pixel-experience-v9-0-hi6250-device-t3830058
Requirements:
EMUI 8 with unlocked bootloader and frp
Downloads:
Download android p rom from above link and magisk
Gapps seems to be broken so its your choice
Stock Recovery https://mega.nz/#!AotnGLgb!aSDY40BM5c7bOnki0v7JscNwyc2sCvhtFNTF7xtuZ6o
TWRP Recovery
https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Flashing Instructions:
Flash twrp then do formate data by typing yes then reboot to recovery
Now wipe data,system,cache and dalvic cache
Now flash rom,gapps and magisk
Now back to TWRP home screen reboot to bootloader then flash stock recovery
Now reboot to stock recovery do factory reset and wipe cache
Reboot
TFS. Will try tonight.
Is this supports volte
Harsu04 said:
Is this supports volte
Click to expand...
Click to collapse
No
Pls include BLL-L22 support
jlan007 said:
Pls include BLL-L22 support
Click to expand...
Click to collapse
It supports if your chipset is hi6250
Askuccio_DROID said:
i want credit, lol
Click to expand...
Click to collapse
Mentioned
OK, I got it
following the steps, but having no microSD it is important to put the files in the root directory using the ADB push command, after making the wipes
Also important to go to mount and put it in read / write mode
to see if it works well and serves for daily use
Flash TWRP
When I flash twrp via fastboot I get this error "FAILED (remote: partition length get error)"
How can I solve it? I'm on EMUI 8 with unlocked bootloader and frp
manny140400 said:
When I flash twrp via fastboot I get this error "FAILED (remote: partition length get error)"
How can I solve it? I'm on EMUI 8 with unlocked bootloader and frp
Click to expand...
Click to collapse
Fastboot flash recovery_ramdisk twrp*. img
Sent from my Zenfone Max Pro M1 using Tapatalk
qaiyum said:
Fastboot flash recovery_ramdisk twrp*. img
Click to expand...
Click to collapse
Thanks, I'm going to try it now.
How do i install TWRP on my RN5 with MIUI 10? I HEARD THAT THE STEPS ARE DIFFERENT
Has your redmi note 5 been Unlock bootloader?
Yep
You can install custom recovery via fastboot
In the normal way? (fastboot flash recovery filename. Img? Then fastboot boot filename. Img?)
ugomaugo said:
In the normal way? (fastboot flash recovery filename. Img? Then fastboot boot filename. Img?)
Click to expand...
Click to collapse
Nope. First boot to TWRP (fastboot boot filename.img) and then flash recovery under TWRP
Can i install Pixel experience on this?
ugomaugo said:
Can i install Pixel experience on this?
Click to expand...
Click to collapse
"This"?
The redmi note 5 with TWRP
ugomaugo said:
The redmi note 5 with TWRP
Click to expand...
Click to collapse
download file unzip then run install. twrp
https://drive.google.com/open?id=1XLncxs4UDcSxiefQomwT4yZpWthwfAES
I am on MIUI 10.0.2.0 can i use the method that you explained? (the "fastboot boot filename.img")
ugomaugo said:
I am on MIUI 10.0.2.0 can i use the method that you explained? (the "fastboot boot filename.img")
Click to expand...
Click to collapse
you talking to me? if so then yes you can.
Hi... I´m in Android One 8.1 Stock, Magisk 18.1 with TWRP 3.2.3-0 (No SD support)
I installed these TWRP flashing via adb and flash in TWRP the installer (With USB-OTG)
Now, ¿How to upgrade to TWRP 3.3.0-0 (twrp-daisy-3.3.0-0-offain)?
I see twrp-daisy-3.3.0-0-offain.img and twrp-installer-daisy-3.3.0-0-offain.zip
¿What is the process to upgrade the TWRP?
In other devices only flash the img in TWRP to boot, but in this device i don´t know...
Regards...
leechgid said:
Hi... I´m in Android One 8.1 Stock, Magisk 18.1 with TWRP 3.2.3-0 (No SD support)
I installed these TWRP flashing via adb and flash in TWRP the installer (With USB-OTG)
Now, ¿How to upgrade to TWRP 3.3.0-0 (twrp-daisy-3.3.0-0-offain)?
I see twrp-daisy-3.3.0-0-offain.img and twrp-installer-daisy-3.3.0-0-offain.zip
¿What is the process to upgrade the TWRP?
In other devices only flash the img in TWRP to boot, but in this device i don´t know...
Regards...
Click to expand...
Click to collapse
same step as u install the old twrp:
boot twrp.img with fastboot
flahs twrp installer.zip
I have twrp whit sd fix on mi mi A2 Lite whit Android pie on v10.07.0
To install twrp, flash the zip from twrp.
You onky need to boot twrp from fastboot the first time so you can do that.
Can't just flash an image because twrp lives on the boot partition.
That is not the right section to ask that...
soul401 said:
I have twrp whit sd fix on mi mi A2 Lite whit Android pie on v10.07.0
Click to expand...
Click to collapse
How did you do that ? Is there an stable version for pie ?
I unlocked just to be able to install magisk so viper4android might work. I tried to boot into recovery with fastboot but all .img I've tried fails with "too many links" error in every laptop I've used. ¿Any ideas? Also I read that this device behaves different than my previous Redmi Note 5 regarding magisk in the sense that magisk will override the oem recovery, is that so? If that's true then there will be no OTAs, am I right?
Enviado desde mi Redmi 7 mediante Tapatalk