¿Update TWRP? - Xiaomi Mi A2 Lite Questions & Answers

Hi... I´m in Android One 8.1 Stock, Magisk 18.1 with TWRP 3.2.3-0 (No SD support)
I installed these TWRP flashing via adb and flash in TWRP the installer (With USB-OTG)
Now, ¿How to upgrade to TWRP 3.3.0-0 (twrp-daisy-3.3.0-0-offain)?
I see twrp-daisy-3.3.0-0-offain.img and twrp-installer-daisy-3.3.0-0-offain.zip
¿What is the process to upgrade the TWRP?
In other devices only flash the img in TWRP to boot, but in this device i don´t know...
Regards...

leechgid said:
Hi... I´m in Android One 8.1 Stock, Magisk 18.1 with TWRP 3.2.3-0 (No SD support)
I installed these TWRP flashing via adb and flash in TWRP the installer (With USB-OTG)
Now, ¿How to upgrade to TWRP 3.3.0-0 (twrp-daisy-3.3.0-0-offain)?
I see twrp-daisy-3.3.0-0-offain.img and twrp-installer-daisy-3.3.0-0-offain.zip
¿What is the process to upgrade the TWRP?
In other devices only flash the img in TWRP to boot, but in this device i don´t know...
Regards...
Click to expand...
Click to collapse
same step as u install the old twrp:
boot twrp.img with fastboot
flahs twrp installer.zip

I have twrp whit sd fix on mi mi A2 Lite whit Android pie on v10.07.0

To install twrp, flash the zip from twrp.
You onky need to boot twrp from fastboot the first time so you can do that.
Can't just flash an image because twrp lives on the boot partition.

That is not the right section to ask that...

soul401 said:
I have twrp whit sd fix on mi mi A2 Lite whit Android pie on v10.07.0
Click to expand...
Click to collapse
How did you do that ? Is there an stable version for pie ?

Related

Can't flash any Custom Recovery on OP3

Hi everyone,
I've a little problem with my OP3, Yesterday I removed my OOS 3.2.6 with TWRP, I flashed the stock recovery back and then I've sideloaded the last OOS 3.5.3 Community Build. Today i'd like to flash the TWRP, i launched the Fastboot menu, nothing seems to go wrong by flashing but when i tried to boot into the recovery, the "1+ powered by android" appears for 5 sec and then a black screen, no TWRP screen... Same problem by trying to restore the OnePlus stock recovery..
I tried "fastboot -w" (wipe) this bring back the stock recovery.
I tried to sideload, OOS 3.5.3, OOS 3.5.3, ResurectionRemix 2.7.4 and CM14 but all of them failed at 47% of work...
I'm thinking that there is a problem caused by an encryption...
"fastboot format userdata" didn't solve the problem..
I'd like to know wich partition i can format/erase to remove this encryption (Loss of data is not a problem for me)
Thanks in advance
Have you tried to flash the modified TWRP ?
Dushaine said:
Have you tried to flash the modified TWRP ?
Click to expand...
Click to collapse
Yes, same problem as TWRP
Same thing happened to me on flashing twrp after sideloading CB 3.5.2 through stock recovery. But flashing the modified twrp 3.0.2-19 solved the issue.
It is newer firmware that won't let you boot into TWRP.
Flash modified TWRP 3.0.2-19 recovery through fast boot.
Then flash <=3.5.0 firmware from here using TWRP.
Then flash this TWRP 3.0.2-0 image again from fast boot.
Then flash a ROM of your liking.
If all else fails, you can try this (flash stock recovery and 3.2.4 FW) WITHOUT relocking and then flash TWRP 3.0.2-0 from the above link to see if that works.
AJay27 said:
Same thing happened to me on flashing twrp after sideloading CB 3.5.2 through stock recovery. But flashing the modified twrp 3.0.2-19 solved the issue.
Click to expand...
Click to collapse
kgs1992 said:
It is newer firmware that won't let you boot into TWRP.
Flash modified TWRP 3.0.2-19 recovery through fast boot.
Then flash 3.5.0 firmware from here using TWRP.
Then flash this TWRP 3.0.2-0 image again from fast boot.
Then flash a ROM of your liking.
If all else fails, you can try this (flash stock recovery and 3.2.4 FW) without relocking and then flash TWRP 3.0.2-0 from the above link to see if that works.
Click to expand...
Click to collapse
I've been able to Flash the Modified recovery, and it booted. By flashing the patch, no problem detected, but after flashing the 3.0.2-0 same black screen as earlier...
So I flashed the modified back, and by trying to flash ResurectionRemix for exemple, no error happenned but, when boot begin, same problem as twrp ...
EDIT : Sorry guys, i didn't read correctly.. I was flashing the same patch ! The 3.5.3 and not the 3.5.0 !!! Normal TWRP is booting corectly now, i'll see for ROM !
Thank you very much to you !!
EDIT 2 : RR 2.7.4 BOOT !!! Thank you so much !

HELP - TWRP on OnePlus 3 running the Open Beta 9 (Nougat ROM)

Here's the deal. I unlocked the bootloader of my OnePlus 3, flashed TWRP Recovery with "Tool All In One" through my pc. Then I was able to root my phone, I did it and then, flashed the Open Beta 9 through TWRP.
Now the problem I have now is that I'm unable to flash TWRP from my computer and I don't know why. It doesn't display any error or anything else. But when I boot into recovery mode, it is not TWRP, it's the stock one. Help me out. I want root and Xposed lol!
fastboot flash recovery TWRP.img
into recovery Vol Plus and Power
flash SU
beta9 is Nougat so xposed is not working yet.
takumintchan said:
fastboot flash recovery TWRP.img
into recovery Vol Plus and Power
flash SU
beta9 is Nougat so xposed is not working yet.
Click to expand...
Click to collapse
Yeah but, how to flash the recovery? What program or whatever I need to flash it?
Drkrs616 said:
Yeah but, how to flash the recovery? What program or whatever I need to flash it?
Click to expand...
Click to collapse
You need adb and Fastboot.
http://forum.xda-developers.com/showthread.php?t=2588979&page=95
On The Fastboot PATH
Same directory, Put twrp.img
Shift and Right Mouse.Open cmd and type
fastboot flash recovery "twrp file name.img"
You can get TWRP.
I recommend TWRP .28
After you can flash any Rom and Kernel , SU etc...
You need modified TWRP Recovery to Run Open Beta 9, official TWRP won't work
Here's the link for Modified TWRP
http://forum.xda-developers.com/devdb/project/dl/?id=21835
Thank you guys so much, I successfully flashed TWRP on my phone. First time, it didn't want to boot but when I rebooted it id did
... Well, update: Booted into system and when y tried to boot into recovery, this time unplugged from the pc, booted with stock recovery -_-
... Update of the update haha: I downloaded the root zip and then I flashed the TWRP, Installed root zip and made a backup of the whole system and now, the TWRP recovery is installed permanently. Thank you if you guys followed my thread.

Please help, twrp can't stay and magisk erases the system..

Hi, just received my device, I followed this guide https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592 and when I reboot my phone, TWRP is replaced by the default recovery... Also when I flash magisk v15.3 my phone can't boot anymore and i got into fastboot mode.. I am running Oxygen os beta, thanks.
I tried everything, different twrp versions, etc... don't know what to do :/
Once you flash the twrp-recovery.img in fastboot are you using the command
Code:
fastboot boot twrp-recovery.IMG
to get into recovery and flash magisk or are you rebooting the phone?
Dazed No More said:
Once you flash the twrp-recovery.img in fastboot are you using the command
Code:
fastboot boot twrp-recovery.IMG
to get into recovery and flash magisk or are you rebooting the phone?
Click to expand...
Click to collapse
I tried both the command you writed, and booting the recovery via the volume button in the fastboot mode.
TWRP boots correctly, then I flash oxygen os beta and all is ok, but when i try to return into recovery, i got the oxygen os recovery. When I install magisk I simply can't boot anymore.
I followed the instructions gived in the link
Why are you flashing beta after twrp? All that is doing is replacing TWRP with the stock recovery.
Flash beta and let the phone boot
Enter fastboot and flash twrp
Boot to twrp with command "fastboot boot twrp-recovery.IMG"
Flash magisk
Reboot to system
Erulak said:
I tried both the command you writed, and booting the recovery via the volume button in the fastboot mode.
TWRP boots correctly, then I flash oxygen os beta and all is ok, but when i try to return into recovery, i got the oxygen os recovery. When I install magisk I simply can't boot anymore.
I followed the instructions gived in the link
Click to expand...
Click to collapse
Bro try installing beta zip through adb sideload from twrp
The key is, after flashing TWRP, DON'T boot into system. Instead, boot into recovery right after flashing TWRP, and flash magisk.
Original OOS will replace the recovery, at least from my experience.
Hi guys, finally solved the problem. I had to download an alternate TWRP ( codeworks ). Also, only the beta version of Magisk worked. Now all is ok, thanks for your help
Erulak said:
Hi guys, finally solved the problem. I had to download an alternate TWRP ( codeworks ). Also, only the beta version of Magisk worked. Now all is ok, thanks for your help
Click to expand...
Click to collapse
This has nothing to do with an alternative TWRP, you can't flash the ROM after TWRP, because ROM includes stock recovery, which or course replaces TWRP as it has been said before.
To "manifest" TWRP after flashing it, you need to boot into recovery before booting into the system.
It's quite simple if you just read the probably 100+ available guides.

[Question][root] Root 9.2.3.0 (9.5.3.0?) - TWRP

Hi all!
I'm with the 9.2.2.0 Global.
I have the original recovery, just supersu flash with a temporary TWRP (boot instead of flash).
Update a few months ago, when the update came out, to version 9.2.3.0, and I was not able to reboot from TWRP to root the system again, so I went back to version 9.2.2.0.
Is there a method to root easily if I update now?
Do you think I'll have problems with version 9.5.3.0 again ?!
Thank you very much!
You can root this version by supersu.zip 2.82 (don't use supersu.zip SR2.82)! Flash it over recovery.
bahuy2003 said:
You can root this version by supersu.zip 2.82 (don't use supersu.zip SR2.82)! Flash it over recovery.
Click to expand...
Click to collapse
The problem is not in sueprsu flash.
I have the problem to booting the TWRP after updating.
Does BOOT, but can not mount any partition, and any change becomes a soft brick.
Don't use SuperSU, use latest beta Magisk instead.
And whats the problem if you flash TWRP 3.2.1-0 ?

Question Help: Can't flash twrp recovery from PC to my Phone (F3)

I successfully unlocked my bootloader, then I tried flashing the twrp by following munchy's tutorial from YouTube (as someone recommended here). I also used the twrp recovery file he provided in the description, by using the latest platform tools from the official website. It was going pretty good. I even got the TeamWin logo, and also loaded up the twrp interface, and was able to navigate through it. But the problem was my internal storage wasn't showing up. So I booted back to my system normally to see If I can find a solution. Then I think I tried again after restarting to see if it fixes itself, but the same problem was persisting. The next time when I tried again, I used the latest twrp version which I downloaded from the official twrp website.
But since my 3rd attempt, I am not able to see any TeamWin recovery come up on my phone, when I connect I do the "fastboot boot (twrp filename)" command in cmd. When I do the command, nothing shows up. The device remains in the Fastboot mode, or just turns off. When I switch it back on, It turns on normally and boots into the phone without any issues, and I can use it. I've tried switching back to the original twrp version munchy used in the above linked video, but same result.
What did I do wrong here? How do I make my phone get into the twrp recovery when I enter the fastboot boot (twrp filename) command thru my PC? How do I make my Internal Storage available to view int he TWRP recovery so I can install it from my Downloads folder? I am on MIUI 14.0.4 If that helps. My end goal is to install Magisk.
Any tips/guides/suggestions are appreciated.
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
NOSS8 said:
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
Click to expand...
Click to collapse
Thank you. I had put backed the screen lock after the first 2 attempts because someone said to to that on a YT video after they faced the same problem. Now I tried again by removing the screen lock and the latest twrp for my device also boots up just fine. Now the problem Is I still can't access my internal storage .
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Try to mount storage.
NOSS8 said:
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Click to expand...
Click to collapse
Yes, I removed the screen security, though I can enter TWRP, I can't read the internal storage. MIUI 14.0.4.
I just watched a YT video where the dude does the following:
-TWRP Recovery
- Wipe
- Format Data
- Types 'yes'
then
-TWRP Recovery
- Reboot
- Recovery
- Do not Install
After coming back to recovery after rebooting, he gets a pop up, which at the swipe says "Swipe to allow for modifications" which he swipes, then now after checking the Internal Storage, It's readable now. Is this a possible solution?
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
NOSS8 said:
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
Click to expand...
Click to collapse
what's twrp A13? Also, I just unlocked my bootloader a few hours ago, so my phone has already done a factory reset and i don't have anything to lose except the Magisk APK and .img file in my phone.
But I have a question, will doing the format data just do a factory reset, or will I lose my ROM? Because I'm not trying to install a custom ROM, I just want to Install Magisk as the end goal with my current ROM.
MIUI 14 Android 13 so use this TWRP
plugged the phone into the PC when it is on the TWRP, you will have access to the internal storage. (works on my 12 pro aves twrp A13 Skk).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
zoinksy said:
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
Click to expand...
Click to collapse
Use this TWRP(officiel).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
thank you, this is the one I was looking for. Sorry to bother you again, now I installed the Magisk V26.1 apk from TWRP. And when I boot back to system and try opening the magisk manager, this happens. It says downloading, forever. I think I shouldn't have directly downloaded the latest version. So probably have to downgrade it a bit. For that, what will I have to do?
Can I just hold the Magisk icon, and uninstall it simply like any other app? Or do I have to do it from the TWRP? Also, Is it necessary for me to uninstall it before downgrading, or can I just download the apk of older magisk version and flash it from twrp just like I did previously?
It was on my first post.
Installation
The Magic Mask for Android
topjohnwu.github.io
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
cyanGalaxy said:
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
Click to expand...
Click to collapse
Sure, but currently only in A12.
NOSS8 said:
Sure, but currently only in A12.
Click to expand...
Click to collapse
I use ArrowOS 13
cyanGalaxy said:
I use ArrowOS 13
Click to expand...
Click to collapse
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
NOSS8 said:
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
Click to expand...
Click to collapse
Hm ok.
Welp for me on AOSP, it works nicely. I flash a new build (or two) every week. Backup/Restore works as should. UI is nice and modern, imo better than TWRP. That's why I'm recommending it.
Haven't heard anyone saying that they can't view Phone storage on OrangeFox.
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
néonaloj said:
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
Click to expand...
Click to collapse
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need ,install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
EDIT:
omitted link
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
NOSS8 said:
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
Click to expand...
Click to collapse
I'm very greatfull for your quick reply ! Thanks
The device is too a Poco f3, sorry.. This doesn't need to flash magisk for twrp to stick (I had another one I've broken)
But I don't understand what's the advantage to first flash a fastboot rom..? As you say to flash twrp would loose root and vice versa... (I've read the thread you're talking about ofox)
So I wanted to go trough +- the way I mentionned, as A13 as well as ofox 'seems' to work (but I'm carefull with that twrp on stock MIUI A12, and I never used ofox..)
So you do think it's a bad idea ?? The rom I want to flash is crdroid.
I'm more lost now ...
Thanks again !

Categories

Resources