Related
Hi
When i bought my galaxy note 2, i received an ota update from lj1 to lj3. My CSC is switzerland unbranded (AUT).
The first time that I connect to kies I saw that didn't show the firmware version and when I force to check it says that my phone don't support initialization. I tried on my 3 computers, two running windows 7 and one windows 8 with av disabled.
So I can't update via kies.
Via ota I received only the first time, with dll7 for my CSC on sammobile, never received a notification to update. I tried to clear data for software update app to force but says your software is up to date.
I used odin to update my phone with the firmware from sam mobile. This is the only solution that works.
But it is not a official solution... And if I didn't knew odin? And the other people that don't have knowledge to do that stay in 4.1.1?
This is a big bug from Samsung and incomprehensible.
My CSC is the only with this problem?
I never root this phone and the device status is normal.
Thanks for the help
Sent from my GT-N7100 using Tapatalk 2
For your CSC (AUT) i think LJ3 is latest and still not update roll out yet.
I recommend to update manually with Odin, as 4.1.1 have SDS a brick bug.
You can update to any country ROM, Feb released 4.1.2 are nice ROM, and when update release for your country, you may odin again to revert to your country ROM.
dr.ketan said:
For your CSC (AUT) i think LJ3 is latest and still not update roll out yet.
I recommend to update manually with Odin, as 4.1.1 have SDS a brick bug.
You can update to any country ROM, Feb released 4.1.2 are nice ROM, and when update release for your country, you may odin again to revert to your country ROM.
Click to expand...
Click to collapse
I updated to DLL7 for my country a month ago via Odin, it is available on sammobile
you can check here
http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=AUT#firmware
yeah but LL7 was rolled back in most of countries
So if you already have LL7 then nothing to worry about SDS and can wait for next update.
dr.ketan said:
yeah but LL7 was rolled back in most of countries
So if you already have LL7 then nothing to worry about SDS and can wait for next update.
Click to expand...
Click to collapse
Ok, i hope that next update will be available via OTA
More one update.
I installed french rom with odin, because is the first that receive updates.
But yesterday french CSC received xmdb6 and my phone stays with xmdb2.
Via ota says that is up to date and can't update via kies because says don't support initialization.
What is the problem with my phone?
Sent from my GT-N7100 using Tapatalk 2
I have a original note 7 from Verizon , still on the 1st build it shipped with and everything . This is the first model that was effected by the recall. I've tried disabling the ota updates but package disabler isn't workin , keeps saying license failed .. even tried downloading a older 6.3 version and same thing .. other then rooting is there a way to disable OTA Updates? Or I may not get them anyway since it's T-Mobile sim in a Verizon phone ?
superhtchd2 said:
I have a original note 7 from Verizon , still on the 1st build it shipped with and everything . This is the first model that was effected by the recall. I've tried disabling the ota updates but package disabler isn't workin , keeps saying license failed .. even tried downloading a older 6.3 version and same thing .. other then rooting is there a way to disable OTA Updates? Or I may not get them anyway since it's T-Mobile sim in a Verizon phone ?
Click to expand...
Click to collapse
There won't be any ota updates.
Sent from my SM-T810 using Tapatalk
I have a ATT branded Moto Z2 with a Cricket SIM. I got the phone in late november, and it came with Android 7.1.1 with the June 1 SPL. I know that ATT has released several updates, the latest in December with the November 1st SPL,
but everytime I check for updates it says that my phone is up-to-date.
So far I tried to check for updates after a factory reset, and also tried to do an OTA update with an old ATT SIM in it. Nothing seems to be working.
I have posted on the lenovo support page but so far I have not got any answer. I am not the guy that has to have the latest software running, but the updates fixed the BlueBorne security hole...
Othat than using a Cricket SIM, the phone is stock, not rooted.
has anybody encountered the same problem? Thank you
So I have two Tmobile versions of this phone. one rooted/unlocked, one not. I am also having a problem with receiving OTA. Mine stock device is on an August Security patch and there have been two released patches since then. I just got off the phone with both motorola and tmobile and they are both useless. I explained over and over that i wasn't calling about the oreo release, that i was calling about ANY updates and they couldn't get that through their head. Further, tmobile states they haven't released an 8.0 ota which we all know is false since several people on this forum have received it.... very frustrating. I may have to unlock my stock device if I ever want an actual update.
ululi said:
I have a ATT branded Moto Z2 with a Cricket SIM. I got the phone in late november, and it came with Android 7.1.1 with the June 1 SPL. I know that ATT has released several updates, the latest in December with the November 1st SPL,
but everytime I check for updates it says that my phone is up-to-date.
So far I tried to check for updates after a factory reset, and also tried to do an OTA update with an old ATT SIM in it. Nothing seems to be working.
I have posted on the lenovo support page but so far I have not got any answer. I am not the guy that has to have the latest software running, but the updates fixed the BlueBorne security hole...
Othat than using a Cricket SIM, the phone is stock, not rooted.
has anybody encountered the same problem? Thank you
Click to expand...
Click to collapse
Chrisy8s said:
So I have two Tmobile versions of this phone. one rooted/unlocked, one not. I am also having a problem with receiving OTA. Mine stock device is on an August Security patch and there have been two released patches since then. I just got off the phone with both motorola and tmobile and they are both useless. I explained over and over that i wasn't calling about the oreo release, that i was calling about ANY updates and they couldn't get that through their head. Further, tmobile states they haven't released an 8.0 ota which we all know is false since several people on this forum have received it.... very frustrating. I may have to unlock my stock device if I ever want an actual update.
Click to expand...
Click to collapse
At least the T-Mobile versions can be rooted. As far as I know, the ATT cannot as of yet.
theres only been one update since august and thats a fixed august. the other being the oreo update thats available now
if you would like to update your phone we have the ota updates and can get you updated without unlocking your bootloader just let me know [email protected] on hangouts
Chrisy8s said:
So I have two Tmobile versions of this phone. one rooted/unlocked, one not. I am also having a problem with receiving OTA. Mine stock device is on an August Security patch and there have been two released patches since then. I just got off the phone with both motorola and tmobile and they are both useless. I explained over and over that i wasn't calling about the oreo release, that i was calling about ANY updates and they couldn't get that through their head. Further, tmobile states they haven't released an 8.0 ota which we all know is false since several people on this forum have received it.... very frustrating. I may have to unlock my stock device if I ever want an actual update.
Click to expand...
Click to collapse
What OTA for Tmobile? Mine has NCX26. 7 as stated in Tmobile support site, I do know that OCX oreo release is suppose to be live but support site doesn't show it andy phone hasn't gotten it.
Found a way to get it to download updates.
So, after wasting my time with Motorola and ATT so-called "technical support", I decided to try something: I rebooted the phone in recovery mode (VOlume down + Power button) and put it in recovery mode. Rebooted from recovery mode, and bingo, it downloaded the next update (September SPL). It now shows "background installation..." in progress. Hopefully this is going to be the solution.
I did the update manually using the file nash_opx 27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC. Xml. zip and it worked perfectly.
djsboy said:
I did the update manually using the file nash_opx 27.109-34_subsidy-DEFAULT_regulatory-DEFAULT_CFC. Xml. zip and it worked perfectly.
Click to expand...
Click to collapse
I think I may have found the right recipe. The trick is to check for updates while NOT on WiFi. So move away from WiFi coverage, but still within Cell coverage, with Data on. Check for updates. It will say that an update is available and will be download when within WiFi range. Move back to where you have WiFi, and bingo, it will start downloading. I did it twice yesterday afternoon, once to go from the Sept to the Oct SPL, and then from the Oct SPL to the Nov SPL, which is the last available update according to the ATT page. All of this with my Cricket SIM. WHy this works is beyond my pay grade to figure out. I will eagerly wait for the next update to be posted to see if this trick works consistently. Again,
this seems to work with my ATT branded phone.
My ATT Z2 force, starting from last evening (1/24/2018), kept getting security update, from September, 2017. Then this morning, October 2017 and November 2017. Does this mean we are going to get Oreo update soon ?
So I've had my Moto zforce 2 for 3 days now. We're is the Oreo update ? T-Mobiles site says it was released Dec 22nd ?
lcc014 said:
My ATT Z2 force, starting from last evening (1/24/2018), kept getting security update, from September, 2017. Then this morning, October 2017 and November 2017. Does this mean we are going to get Oreo update soon ?
Click to expand...
Click to collapse
Dude..Let us know when u get Oreo update....So am I
Anyone on TMobile receive the ota update ?
There are issues with calling and sms on the T-Mobile variant. The update has been pulled while they sort out the issues.
Well that makes sense why I'm not seeing it then.
I am still not able to get the AT&T update past June. I tried the reboot into recovery and nothing. Is there a way to manually install the update from an SD card which would allow for OTA updates in the future?
TheLooq said:
There are issues with calling and sms on the T-Mobile variant. The update has been pulled while they sort out the issues.
Click to expand...
Click to collapse
Good. On my account we got 2 of them for Christmas. A few days after Christmas, one of them updated to Oreo. At this point, the Galaxy S7 Edge on our account could not hear the Z2 Force. Went through everything with T-Mobile support including network settings reset, factory resetting both the Samsung and Motorola phones. Didn't fix it. Meanwhile, the Z2 Force that was still on Nougat was fine. A few days later, it also updated to Oreo, and now neither Z2 Force can be heard on the Samsung. I hope they get this mess cleaned up soon since it's been a month.
It seems to be only between those two phones. Until the next update/patch is released, the workaround is to disable VoLTE in call settings on the z2.
Got AT&T update to 8.0.0 this morning.
I received notice of the Tmobile Oreo update, downloaded it, but cannot install it. It only says something went wrong and didn't install the update. I have the bootloader unlocked and Magisk installed. I followed the instructions for Magisk dual partition updates. I uninstalled Magisk using Restore Images and did not reboot. I went to System Updates and downloaded the update again. It never went to Security Update Installing, step 1. I am on Magisk v 16.0 which passes the SafetyNet check, ctsProfile: true and basicIntegity: true. At this point, should I completely uninstall Magisk, flash the OreoFlashAll.zip or the NASH_TMO_C_OCX27.109-36_subsidy-TMO-regulatory-DEFAULT_CFC.xml.zip? Or something different?
lcc014 said:
Got AT&T update to 8.0.0 this morning.
Click to expand...
Click to collapse
Let us know if you lose the animated home button as I did after the At&t update. I asked the question in the room and no one answered. Hopefully I didn't break any rules by asking here. Thank you.
Sent from my Moto Z (2) using Tapatalk
I just got an S9 and have not been able to get it to apply all of the available updates. When I check for updates, it says that I have the latest one already. I tried the Smart Switch software and that says I am also up to date. I cleared the cache partition and then set the date to one day ahead and checked for updates. It took a few minutes checking but then it finished and said I was up to date.
My previous phone was an S8 and that phone had issues updating too. I had to go to ubreakifix to have them update the phone when Android 8 became available. After that update, my S8 never got an OTA again.
I fear that this S9 is having the same problem. I even activated the new S9 with a new sim card. I also verified that AT&T sees that I have an S9.
Anyone know what is going on? Anything else I can do to get it to update? I am currently on the previous version with baseband G960USQS3ARG8.
dominican2589 said:
I just got an S9 and have not been able to get it to apply all of the available updates. When I check for updates, it says that I have the latest one already. I tried the Smart Switch software and that says I am also up to date. I cleared the cache partition and then set the date to one day ahead and checked for updates. It took a few minutes checking but then it finished and said I was up to date.
My previous phone was an S8 and that phone had issues updating too. I had to go to ubreakifix to have them update the phone when Android 8 became available. After that update, my S8 never got an OTA again.
I fear that this S9 is having the same problem. I even activated the new S9 with a new sim card. I also verified that AT&T sees that I have an S9.
Anyone know what is going on? Anything else I can do to get it to update? I am currently on the previous version with baseband G960USQS3ARG8.
Click to expand...
Click to collapse
If you just got it, give it a week or so.
There was an S9+ that was added on another line within my account at the same time and it got all the updates right away. Hopefully time will fix mine but right now I doubt it.
Sent from my SM-G960U using Tapatalk
It's been over a week and still no update. Anyone have ideas as to what is going on?
Sent from my SM-G960U using Tapatalk
dominican2589 said:
It's been over a week and still no update. Anyone have ideas as to what is going on?
Sent from my SM-G960U using Tapatalk
Click to expand...
Click to collapse
Did you ever flash this to U1 Firmware? I had a similar issue when i decided to go back to U firmware. Ended up having to to revert back to an old version of U and then proceed with side loading updates from firmware science until the BR firmware (side note, the firmware i found on here to revert back to stock U did not have a direct upgrade path on Firmware science) then AT&T started updating as normal.
I have not flashed anything. This is new out of the box.
Sent from my SM-G960U using Tapatalk
I would take it back to AT&T.
My previous phone did the same thing which is odd. I can't see why two consecutive new phones would not update for me. Is there a way I can download the update from AT&T and sideload it without having to reinstall everything?
Sent from my SM-G960U using Tapatalk
Go to samsung.firmware.science and check.
911jason said:
Go to samsung.firmware.science and check.
Click to expand...
Click to collapse
I applied the next update from there and while it updated, it wiped my phone. now to spend a few hours again resetting everything up. i thought this wasn't supposed to wipe my phone?
Don't bother setting up your phone until you're all caught up with updates. I learned that the hard way. Just skip all the setup stuff after connecting to WiFi, then check for updates. Go back to the firmware science site if there are none available. I'm on 3BRJ6 with a November 1st security patch. This one was an OTA update after manually installing 3 or 4 from the firmware science site.
P.S. Under settings-about phone-software information do you show ATT/ATT/ATT at the bottom of the Service Provider SW ver.?
911jason said:
Don't bother setting up your phone until you're all caught up with updates. I learned that the hard way. Just skip all the setup stuff after connecting to WiFi, then check for updates. Go back to the firmware science site if there are none available. I'm on 3BRJ6 with a November 1st security patch. This one was an OTA update after manually installing 3 or 4 from the firmware science site.
P.S. Under settings-about phone-software information do you show ATT/ATT/ATT at the bottom of the Service Provider SW ver.?
Click to expand...
Click to collapse
The problem with it resetting my phone is that if still continue to not receive ota updates directly, I'll never update again since I wouldn't want to reset again. As for the fw, I do see Att/att/att.
I updated up to the October security patch to see if it would offer the Nov security patch and my phone still won't offer ota updates.
Sent from my SM-G960U using Tapatalk
Does your phone show the blue AT&T logo during boot up? Does it have all the AT&T bloatware?
Yup, it's an Att branded phone. I bought from Best buy. Came in Att box, has all the bloatware too.
Sent from my SM-G960U using Tapatalk
Then I go back to my initial recommendation that you return it. I would also consider asking AT&T if there is some way to wipe your account data clean before activating a new phone and make sure you get a new sim card.
Hi All,
My apps are updating fine and i see that android 10 has been out for a few months now yet my Note10+ SM-N975U is not updating at all. it seems my security patches are still stuck on august 2019 and every time i try to OTA update, it says my phone us up to date. Is there anyway to bypass this. I see everyone saying to use Odin to update my phone but i am not familiar with the program and where/how to source the note 10 update
Id greatly appreciate the help as its affecting many of my apps
NYKNick1015 said:
Hi All,
My apps are updating fine and i see that android 10 has been out for a few months now yet my Note10+ SM-N975U is not updating at all. it seems my security patches are still stuck on august 2019 and every time i try to OTA update, it says my phone us up to date. Is there anyway to bypass this. I see everyone saying to use Odin to update my phone but i am not familiar with the program and where/how to source the note 10 update
Id greatly appreciate the help as its affecting many of my apps
Click to expand...
Click to collapse
+1 for me. Ive spent almost 2 years and 3 phones trying to get an answer to this. My note 8 had this problem, then my note 10+, then the replacement note 10+. At&t blames Samsung, then Samsung blames at&t, over and over and over. I even had a Samsung technician sit in on a 3 way call with an at&t technician for the better part of an hour. The last I heard was that at&t was petitioning samsung to fix something on their end because at&t shows that everything is up to date on my phone but its not. Im looking into Odin too because this is getting stupid.
At&t is horrible with OTA's. They work for some but for a lot of people it does not, and I am one of them. At&t has never been able to give me an answer as to why this happened on my Note 8..9..and 10+.
Odin is very easy. You dont have to use At&t firmware you can use any Snapdragon US firmware they are the same. Once its installed, it will provision to you sim. There are many threads that have the firmware needed or just us Frija to download the firmware. Once downloaded you need to extract the files. You will have BL..AP..CP..CSC...HOME_csc. You need to download the correct version of Odin to flash the firmware. Open Odin put device in download mode connect device. Once odin recognizes devices find where you extracted the firmware. In odin put BL in BL spot..AP in AP spot..CP in Cp spot. If you want to save data, put HOME_csc in CSC spot. If you want clean install put CSC in CSC spot as it will wipe device. Once you have everything where it should be click start and Odin will flash the firmware. Once complete Odin will say PASS at top left..boot time should take a few minutes. But remember if the firmware you flash has a higher bootloader you cant downgrade back to previous version.
Sent from my SM-N975U using Tapatalk
So I can use a verizon csc and it will work on a att branded phone? Or is a generic one better?
Edit
Basically which one do you pick. I'm leaning towards a tmobile because it sounds like the included bloatware is smaller.
I have At&t device purchased at At&t. I have used USC..Tmobile..Verizon. The device will provision to your sim. If you dont want bloat just flash U1 firmware. But I think you will lose advanced features like wifi calling if you do. I cant remember if flashing a (U) csc with U1 firmware brings back advanced features. But prob just stick with 1 firmware until you have a understanding on how to do this...Good luck.
Sent from my SM-N960U using Tapatalk
butchieboy said:
I have At&t device purchased at At&t. I have used USC..Tmobile..Verizon. The device will provision to your sim. If you dont want bloat just flash U1 firmware. But I think you will lose advanced features like wifi calling if you do. I cant remember if flashing a (U) csc with U1 firmware brings back advanced features. But prob just stick with 1 firmware until you have a understanding on how to do this...Good luck.
Sent from my SM-N960U using Tapatalk
Click to expand...
Click to collapse
I actually went ahead and did this last night with the tmobile firmware and it was just as easy as you said. For whatever reason I didn't even get any bloatware. It booted up with the at&t logo and sound, and my software version says att/att/att. I put my sim card back in and there were no special notifications or anything, everything just worked. I wonder if Frija gave me the att firmware despite me putting in tmb? Either way, everything is up to day now. Thanks for the help!
Anytime my friend glad it all worked out[emoji106]
Sent from my SM-N975U using Tapatalk
US to EU Automatic Updates
Hello!
Sorry if I'm posting in a wrong place.
Will Samsung Galaxy Note 10+ US SIM FREE, getting regularly (automatic) updates in Europe.
Thank you.
butchieboy said:
At&t is horrible with OTA's. They work for some but for a lot of people it does not, and I am one of them. At&t has never been able to give me an answer as to why this happened on my Note 8..9..and 10+.
Odin is very easy. You dont have to use At&t firmware you can use any Snapdragon US firmware they are the same. Once its installed, it will provision to you sim. There are many threads that have the firmware needed or just us Frija to download the firmware. Once downloaded you need to extract the files. You will have BL..AP..CP..CSC...HOME_csc. You need to download the correct version of Odin to flash the firmware. Open Odin put device in download mode connect device. Once odin recognizes devices find where you extracted the firmware. In odin put BL in BL spot..AP in AP spot..CP in Cp spot. If you want to save data, put HOME_csc in CSC spot. If you want clean install put CSC in CSC spot as it will wipe device. Once you have everything where it should be click start and Odin will flash the firmware. Once complete Odin will say PASS at top left..boot time should take a few minutes. But remember if the firmware you flash has a higher bootloader you cant downgrade back to previous version.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Hi I have the same problem. I flashed android 10 One UI 2.0 on my Exynos Note10+ SM-N975F last December via Odin and download the firmware from Samfrew(like Sammobile).(the firmware is the German version and I bought my phone from Egypt) Since then I didn't receive any security patch updates I only have the December 2019 one. Will it be safe if I download the latest firmware from Sammobile and flash it; the file in over 5GB , can this overwrite? I never tried to flash the same software two times. Is it safe?
As long as you are using the firmware that is for your device and your region you should be fine. Although this is Snapdragon thread I would think International flashing is same. You may want to double check in your device specific thread as I don't want to be the blame if there is something different with F version.
SM-N950U Extreme Syndicate Root
---------- Post added at 06:21 AM ---------- Previous post was at 06:11 AM ----------
Also try turning off auto update date and time. Set date like 5days ahead. Then check for update. Sometimes this little trick works for OTA
SM-N950U Extreme Syndicate Root
Robiko said:
Hello!
Sorry if I'm posting in a wrong place.
Will Samsung Galaxy Note 10+ US SIM FREE, getting regularly (automatic) updates in Europe.
Thank you.
Click to expand...
Click to collapse
Yes,i have u1 version and i receive update regulary,now waiting for oneui 2.1 [emoji3]