right now "flashing no command"
how can i upload video about this ?
Related
Hello,
Not new to flashing roms but, was recently running CloudyG3 2.5 Rom on my lg g3 D852 and wanted to switch to the kitkat version G3 1.2 during the installation I accidentally clicked on another version other than D852. Now the phone is stuck at Fastboot Mode Started.
I am unable to get into the recovery but, can access download mode. Currently there is no .kdz file for my carrier but only a .tot file. Using the LG FlashTool and the given proper .tot and .dll I tried flashing my phone and recieve the following error.
"Device Model Different"
Can anyone help me?
(XDA wont allow me to post links to the error from LG Flash Tool because I have under 10 posts)
KDZ's for Canadian variants are here?
http://lg-phone-firmware.com/firmware-Lg+G3-Tutti-41.html
FIXED
I got fulmics ROM (MM), I tried to flash with KDZ method but it stuck at %10, i think because i have MM, so i tried TOT method but it says "Device model is different! Check phone or dll, my lasy chance was using LGUP but it says Unknown model maybe because of rom or my device model being D855TR (Turkey), I can't find any TOT files for D855TR, I am now stuck at Download Mode, I need to return to stock because I will send my phone to carrier for yellow screen burn.
FIXED
check my comment
scavel said:
I got fulmics ROM (MM), I tried to flash with KDZ method but it stuck at %10, i think because i have MM, so i tried TOT method but it says "Device model is different! Check phone or dll, my lasy chance was using LGUP but it says Unknown model maybe because of rom or my device model being D855TR (Turkey), I can't find any TOT files for D855TR, I am now stuck at Download Mode, I need to return to stock because I will send my phone to carrier for yellow screen burn.
Click to expand...
Click to collapse
It's the same with me! Well.. Almost. I have LGD855P (brazilian model). It's stuck on Download mode with "633A B1" error showing on the bottom of the screen.
gb1456v said:
It's the same with me! Well.. Almost. I have LGD855P (brazilian model). It's stuck on Download mode with "633A B1" error showing on the bottom of the screen.
Click to expand...
Click to collapse
I found a solution and fixed it now i can boot up the phone, I downloaded HxD editor, and edited the .tot and .dll file. Open the .dll file with HxD editor and search for word: "d855" and add your carrier's letters, i changed it to "d855TR" it is "d855p" for you, then open the .tot file you downloaded and do the same on it. Worked fine with TOT method. and you also need to do it on windows 7 i think didn't work on my windows 10 always stucked at %10 but i made it on windows 7.
I have two LG g4 . both of them refurbished and korean version ( i've searched iemi and found them, one of is F500k and other is F500s) but flashed as LGH815 rom (rom version lollipop H81510h .)
after flashing H81520j in my F500s model it wont turn on. but i can hear boot sound. also blue LED beeps . if i pressed volume button i can hear sound. I flashed it with LGUP and it flashed perfectly but not booting.
i've flashed the same rom in another device ( which is F500k) and working perfectly.
i've also flashed perfectly other rom version. which are...
1) Europe H815D kdz
2) Europe open H815D kdz
3)H81520i Kdz
4) LGH815AT-00-V10h-GLOBAL-COM-AUG-25-2015+0.tot file
I can not boot my F500s device right now. no download mood. but device manager showed it as LG Androidnet Usb serial port.
also detected by LGUP but trying to flash it via LGUP but it says KDZ file is invalid.Tried same KDZ which flshed earlier but no use . when i open LGUP phone setting option it detects as H818 device .
tried in LG flash tool 2014 . but not working . also tried with connecting LG bridge but MTP mood is disabled .
i think it is not hard bricked. plz help me !!!
Sorry for my bad English
okay guys.... finally my phone is alive..!!!!:laugh::laugh::laugh:
my phone was recognized by LGUP by all af the KDZ were showing error..
so when i saw after clicking phone setting of LGUP that my phone is showing H818 version ( i don't know why the hell is that coz i didn't setup any H818 version rom) i first download a H818 rom . which was a tot file. i installed it. i was amused to see that is was installed where other kdz were detected invalid. but although i setup that phone wasn't booting. so then i edit a H815 rom and setup it .
which was "LGH815AT-00-V10h-GLOBAL-COM-AUG-25-2015+0.tot"
it installed perfectly but my problem still remains.
and then i installed "LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0.tot" file ( i have to edit it too.)
and horray.....!!! my phone is alive....!!!!!!
but i've to FRP by pass it.
by the way.. i've a question . which one is responsible for network ? " modem, boot or any other image ?
if i extract that img from this korean version and use it to a global version will it work ?
Sir please tell me how you edit LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0.tot file i have edited it with Hex editor changed model to H815 as i have flashed H815 uk rom on my LG F500L
when i went to LG Service center because battery problem, they said "this phone is not made in this country" why they said that, it had F500K firmware, but i flashed G4 v29(N) rom by steadfasterx because bootloop problem,then it changed to F500-H815-LGLS991(F500 wrote on back of the phone, and firmware is H815, and it wrote LS991 in setting>phone information) so the QUESTION IS: I want to flash F500K N firmware, so just i need to replace some files(not in META-INF, only .bin files)in v29.zip by steadfasterx?
Update: Here is what SALT gives me. https://i.imgur.com/Np6roET.png
Can someone give me some steps, which firmware to flash and how to do it with SALT
Today I bought used LG G4 with secure booting error 1003 and I though I could flash stock and get a nice phone.
The sticker under the battery says H815 and the IMEI number checks out as F500S but when I looked inside, the motherboard name was F500L Main.
The phone shows up as H815 with H81510H version. I tried LG Bridge too it showed up as F500S but it didn't want to update it after it downloaded the firmware....
Download mode works but recovery doesn't work. I tried vol. down and usb and it boots up in fastboot mode with scares information nothing much some key parts are empty but it says that the secure boot is off.
I tried latest OPEN H815 6.0.1 kdz, but I get the error 0x2000 at 9% something about trying to flash smaller ARB version. I even tried F500L TOT with LG UP and flash tool but then I get an error "invalid tot" I even tried hex editing the TOT file I changed one line from F500L to H815 but I get the same invalid Tot file. Maybe I missed some other part of the tot file..
My only option left is to get into linux and use SALT but I have no idea what to do with it. I know that I can get some information and even extract system into kdz right?
Let me know if there is fix like some DLL for flashing the F500L TOT file...
twrp
Since its UsU i was able to boot into twrp. What rom should I install now? the GPT in SALT says H811 and my board is f500 (L) It had h815:laugh:
serifpersia said:
Since its UsU i was able to boot into twrp. What rom should I install now? the GPT in SALT says H811 and my board is f500 (L) It had h815:laugh:
Click to expand...
Click to collapse
What about reading the UsU thread??? There is a even a faq.. Whatever you do never flash anything which has an ARB higher then 0.
Sent from my OnePlus 7T Pro using XDA Labs
steadfasterX said:
What about reading the UsU thread??? There is a even a faq.. Whatever you do never flash anything which has an ARB higher then 0.
Click to expand...
Click to collapse
I finally fixed it.
I tried FWUL but when I had to update SALT to get ARB from kdz it had some python3 crypto module missing and I wasn't able to make it work. So I used my Lubuntu and I installed everything needed and Salt was running fully updated.
I extracted the latest MM kdz for F500L and using fastboot I flashed the MM bootstack and boot system modem(once) and the phone started to boot up to the korean android is updating screen. It bootlooped with error 1009. I assumed that the battery was working fine but nope it was totally dead.
With the charger the phone booted up and everything works even Cellular Network.
Your SALT tool saved my ass man