Refurbished LG G4 Help to get it to stock SALT? - G4 Q&A, Help & Troubleshooting

Update: Here is what SALT gives me. https://i.imgur.com/Np6roET.png
Can someone give me some steps, which firmware to flash and how to do it with SALT
Today I bought used LG G4 with secure booting error 1003 and I though I could flash stock and get a nice phone.
The sticker under the battery says H815 and the IMEI number checks out as F500S but when I looked inside, the motherboard name was F500L Main.
The phone shows up as H815 with H81510H version. I tried LG Bridge too it showed up as F500S but it didn't want to update it after it downloaded the firmware....
Download mode works but recovery doesn't work. I tried vol. down and usb and it boots up in fastboot mode with scares information nothing much some key parts are empty but it says that the secure boot is off.
I tried latest OPEN H815 6.0.1 kdz, but I get the error 0x2000 at 9% something about trying to flash smaller ARB version. I even tried F500L TOT with LG UP and flash tool but then I get an error "invalid tot" I even tried hex editing the TOT file I changed one line from F500L to H815 but I get the same invalid Tot file. Maybe I missed some other part of the tot file..
My only option left is to get into linux and use SALT but I have no idea what to do with it. I know that I can get some information and even extract system into kdz right?
Let me know if there is fix like some DLL for flashing the F500L TOT file...

twrp
Since its UsU i was able to boot into twrp. What rom should I install now? the GPT in SALT says H811 and my board is f500 (L) It had h815:laugh:

serifpersia said:
Since its UsU i was able to boot into twrp. What rom should I install now? the GPT in SALT says H811 and my board is f500 (L) It had h815:laugh:
Click to expand...
Click to collapse
What about reading the UsU thread??? There is a even a faq.. Whatever you do never flash anything which has an ARB higher then 0.
Sent from my OnePlus 7T Pro using XDA Labs

steadfasterX said:
What about reading the UsU thread??? There is a even a faq.. Whatever you do never flash anything which has an ARB higher then 0.
Click to expand...
Click to collapse
I finally fixed it.
I tried FWUL but when I had to update SALT to get ARB from kdz it had some python3 crypto module missing and I wasn't able to make it work. So I used my Lubuntu and I installed everything needed and Salt was running fully updated.
I extracted the latest MM kdz for F500L and using fastboot I flashed the MM bootstack and boot system modem(once) and the phone started to boot up to the korean android is updating screen. It bootlooped with error 1009. I assumed that the battery was working fine but nope it was totally dead.
With the charger the phone booted up and everything works even Cellular Network.
Your SALT tool saved my ass man

Related

G4 shows wrong version

long time lurker here.I bought a g4 second hand.it was advertised as h815 unlocked.the imei checked out online and all stickers said 815 as well.but in hardware info it showed h815T(HK variant).thankfully i knew how to flash firmwares so i downloaded a KDZ and flashed it with lg ft 2014.for some reason (i dont remember why) i flashed 2-3 times with other kdzs and ended up in the current state.the phone now shows H818(dual sim variant) in hardware info and doesnt
detect my sim card(same sim works fine in my G2).I never downloaded the h818 kdz.
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||((TLDR))||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
phone shows wrong model in settings and doesnt detect sim card.flashing stock kdz doesnt fix this
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
any help would be appreciated as i have been flashing various KDZs since the last 2 months but have had no luck yet.
ps.
i am able to root using system.img injection method if root is required
nizamelahi said:
long time lurker here.I bought a g4 second hand.it was advertised as h815 unlocked.the imei checked out online and all stickers said 815 as well.but in hardware info it showed h815T(HK variant).thankfully i knew how to flash firmwares so i downloaded a KDZ and flashed it with lg ft 2014.for some reason (i dont remember why) i flashed 2-3 times with other kdzs and ended up in the current state.the phone now shows H818(dual sim variant) in hardware info and doesnt
detect my sim card(same sim works fine in my G2).I never downloaded the h818 kdz.
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||((TLDR))||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
phone shows wrong model in settings and doesnt detect sim card.flashing stock kdz doesnt fix this
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
any help would be appreciated as i have been flashing various KDZs since the last 2 months but have had no luck yet.
ps.
i am able to root using system.img injection method if root is required
Click to expand...
Click to collapse
i think is was misinterpreted. its a h815 but a h815t indeed and unlocked mean carrier as you know theres no way to unlock bootloader.. you need to flash the h815T KDZ. i hope that you didnt mess your imei.
inject only works in LP not on MM. also youll need to find out if you can downgrade to lollipop. as this phone have antirollback wich means once you are on a version you cannot go nack or youll hard brick phone.
raptorddd said:
i think is was misinterpreted. its a h815 but a h815t indeed and unlocked mean carrier as you know theres no way to unlock bootloader.. you need to flash the h815T KDZ. i hope that you didnt mess your imei.
inject only works in LP not on MM. also youll need to find out if you can downgrade to lollipop. as this phone have antirollback wich means once you are on a version you cannot go nack or youll hard brick phone.
Click to expand...
Click to collapse
thank you for the response.im on lollipop right now since ft 2014 doesnt flash MM and lgup and ft 2.0.1.6 stop flashing after checking phone info(they stop flashing as phone shows h818 but kdz is for h815).I flashed h815T kdz multiple times(twice just today)but phone still shows h818 in lgup and in settings.the phone cant be h818 as it only has 1 sim slot.
imei is ok right now.SIM issue happened to be a ****ty sim cut job by the customer service guy.only remaining issue is the wrong version showing up in phone settings. cant flash MM due to that.
also,is there anything good about upgrading to MM???
nizamelahi said:
thank you for the response.im on lollipop right now since ft 2014 doesnt flash MM and lgup and ft 2.0.1.6 stop flashing after checking phone info(they stop flashing as phone shows h818 but kdz is for h815).I flashed h815T kdz multiple times(twice just today)but phone still shows h818 in lgup and in settings.the phone cant be h818 as it only has 1 sim slot.
imei is ok right now.SIM issue happened to be a ****ty sim cut job by the customer service guy.only remaining issue is the wrong version showing up in phone settings. cant flash MM due to that.
also,is there anything good about upgrading to MM???
Click to expand...
Click to collapse
Actually MM isnt an upgrade. Lollipop is best(maybe nougat will be worth anything). I think you should flash uk v20g kdz with lg up(or LG firware flash 2014). I suggest using LG UP also you can give TOT method a try
check this thread:
https://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
reply to me if you will need any help
Minto107 said:
Actually MM isnt an upgrade. Lollipop is best(maybe nougat will be worth anything). I think you should flash uk v20g kdz with lg up(or LG firware flash 2014). I suggest using LG UP also you can give TOT method a try
check this thread:
https://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
reply to me if you will need any help
Click to expand...
Click to collapse
cant flash tot as lgup and ft 2.0.1.6 check phone version....
no MM for me then...lets just wait for nougat
the only issue left now is no network reception
nizamelahi said:
cant flash tot as lgup and ft 2.0.1.6 check phone version....
no MM for me then...lets just wait for nougat
the only issue left now is no network reception
Click to expand...
Click to collapse
Do they check in build.prop? If so just change build.prop value and you're good to go. I think that there is also possibility to fake your software version and then flash anything you want
Wysłane z mojego LG-H815 przy użyciu Tapatalka

LG G3 Can't Return to stock (D855TR) (Help)

FIXED
I got fulmics ROM (MM), I tried to flash with KDZ method but it stuck at %10, i think because i have MM, so i tried TOT method but it says "Device model is different! Check phone or dll, my lasy chance was using LGUP but it says Unknown model maybe because of rom or my device model being D855TR (Turkey), I can't find any TOT files for D855TR, I am now stuck at Download Mode, I need to return to stock because I will send my phone to carrier for yellow screen burn.
FIXED
check my comment
scavel said:
I got fulmics ROM (MM), I tried to flash with KDZ method but it stuck at %10, i think because i have MM, so i tried TOT method but it says "Device model is different! Check phone or dll, my lasy chance was using LGUP but it says Unknown model maybe because of rom or my device model being D855TR (Turkey), I can't find any TOT files for D855TR, I am now stuck at Download Mode, I need to return to stock because I will send my phone to carrier for yellow screen burn.
Click to expand...
Click to collapse
It's the same with me! Well.. Almost. I have LGD855P (brazilian model). It's stuck on Download mode with "633A B1" error showing on the bottom of the screen.
gb1456v said:
It's the same with me! Well.. Almost. I have LGD855P (brazilian model). It's stuck on Download mode with "633A B1" error showing on the bottom of the screen.
Click to expand...
Click to collapse
I found a solution and fixed it now i can boot up the phone, I downloaded HxD editor, and edited the .tot and .dll file. Open the .dll file with HxD editor and search for word: "d855" and add your carrier's letters, i changed it to "d855TR" it is "d855p" for you, then open the .tot file you downloaded and do the same on it. Worked fine with TOT method. and you also need to do it on windows 7 i think didn't work on my windows 10 always stucked at %10 but i made it on windows 7.

Help !! LG G4 LGH815 (refurbished) Black screen only sound no download mood

I have two LG g4 . both of them refurbished and korean version ( i've searched iemi and found them, one of is F500k and other is F500s) but flashed as LGH815 rom (rom version lollipop H81510h .)
after flashing H81520j in my F500s model it wont turn on. but i can hear boot sound. also blue LED beeps . if i pressed volume button i can hear sound. I flashed it with LGUP and it flashed perfectly but not booting.
i've flashed the same rom in another device ( which is F500k) and working perfectly.
i've also flashed perfectly other rom version. which are...
1) Europe H815D kdz
2) Europe open H815D kdz
3)H81520i Kdz
4) LGH815AT-00-V10h-GLOBAL-COM-AUG-25-2015+0.tot file
I can not boot my F500s device right now. no download mood. but device manager showed it as LG Androidnet Usb serial port.
also detected by LGUP but trying to flash it via LGUP but it says KDZ file is invalid.Tried same KDZ which flshed earlier but no use . when i open LGUP phone setting option it detects as H818 device .
tried in LG flash tool 2014 . but not working . also tried with connecting LG bridge but MTP mood is disabled .
i think it is not hard bricked. plz help me !!!
Sorry for my bad English
okay guys.... finally my phone is alive..!!!!:laugh::laugh::laugh:
my phone was recognized by LGUP by all af the KDZ were showing error..
so when i saw after clicking phone setting of LGUP that my phone is showing H818 version ( i don't know why the hell is that coz i didn't setup any H818 version rom) i first download a H818 rom . which was a tot file. i installed it. i was amused to see that is was installed where other kdz were detected invalid. but although i setup that phone wasn't booting. so then i edit a H815 rom and setup it .
which was "LGH815AT-00-V10h-GLOBAL-COM-AUG-25-2015+0.tot"
it installed perfectly but my problem still remains.
and then i installed "LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0.tot" file ( i have to edit it too.)
and horray.....!!! my phone is alive....!!!!!!
but i've to FRP by pass it.
by the way.. i've a question . which one is responsible for network ? " modem, boot or any other image ?
if i extract that img from this korean version and use it to a global version will it work ?
Sir please tell me how you edit LGF500LAT-00-V11d-LGU-KR-SEP-21-2015+0.tot file i have edited it with Hex editor changed model to H815 as i have flashed H815 uk rom on my LG F500L

Unlocking LG G4 F500L using Salt

I want to unlock my LG 500L(I guess everyone wants that right ) which is updated to nougat.
I tried to downgrading using the F500l20u kdz from lg firmware using LGUP but it failed at 11%.
Replaced the .dll file , still no luck.
Tried to go back to LP using the tot but it failed giving the unknown command error.
So if anyone of you who want to support the unlocking of LG g4 F500L with nougat can give me suggestions on how to go back to MM in order to flash the USU.
Flashing back the Nougat kdz works fine though.

Can't flash any kdz/tot after unbricking deadboot H810 with 9008 QFIL trick.

Hello and Good Day to everyone.
I have a problem with my LG G4 (H810) . At first it was not booting at all (no power), so i tried the unbricking trick (QFIL+shorting the two points in the motherboard). I got through with it successfully. I then proceeded to the download mode. My next step was to flash an H810 KDZ. First, i used LG UP and got invalid tots on all H810 roms i've tried (Puerto Rico and AT&T). I looked at my phone's screen and i noticed the line "LS991ZVA". I then tried LG FLASH TOOL 2014 it gave a download error saying (LS991-->H810). I also tried LGFlashTool-2.0.1.6 and it still says download error at the end. Is this still repairable?
PS:
There's was one point when i looked at the screen and instead of LS991ZVA at the bottom, it showed H815AT_(i forgot what's next). I tried flashing an H815 kdz and it didnt show that invalid tot but the new error showed "antirollback". I was rushing to work so i wasnt able to download a newer H815 kdz. I tried to recreate that scenario in the office but now i'm stuck in LS991ZVA line again. I don't know what i did made that H815AT_ line show in download mode.
Hope anyone can help. Thank you.
rph2012cheme2017 said:
Hello and Good Day to everyone.
I have a problem with my LG G4 (H810) . At first it was not booting at all (no power), so i tried the unbricking trick (QFIL+shorting the two points in the motherboard). I got through with it successfully. I then proceeded to the download mode. My next step was to flash an H810 KDZ. First, i used LG UP and got invalid tots on all H810 roms i've tried (Puerto Rico and AT&T). I looked at my phone's screen and i noticed the line "LS991ZVA". I then tried LG FLASH TOOL 2014 it gave a download error saying (LS991-->H810). I also tried LGFlashTool-2.0.1.6 and it still says download error at the end. Is this still repairable?
PS:
There's was one point when i looked at the screen and instead of LS991ZVA at the bottom, it showed H815AT_(i forgot what's next). I tried flashing an H815 kdz and it didnt show that invalid tot but the new error showed "antirollback". I was rushing to work so i wasnt able to download a newer H815 kdz. I tried to recreate that scenario in the office but now i'm stuck in LS991ZVA line again. I don't know what i did made that H815AT_ line show in download mode.
Hope anyone can help. Thank you.
Click to expand...
Click to collapse
Can I ask how you got the H810? It sounds like you may have a frankenstein device (one model motherboard with a different firmware flashed)
Maybe @steadfasterX knows more
ThePiGuy said:
Can I ask how you got the H810? It sounds like you may have a frankenstein device (one model motherboard with a different firmware flashed)
Maybe @steadfasterX knows more
Click to expand...
Click to collapse
It was sold to me by a friend for 16 dollars because the phone wont turn on anymore. My original plan was to only take the Screen Assembly because I also have a G4 (H818P) but the screen already has bubbles at the sides and sometimes ghost touches happen and also there's that annoying temporary screen burn-in effect everytime i stay on an image for too long. I tried to take everything apart and put my H818 motherboard onto the H810. When i turned it on, the screen don't show anything and the notification led flashes (light blue) and the phone would then turn off. Right now, i'm trying to repair the H810 so that atleast i can make it my main phone.
rph2012cheme2017 said:
so i tried the unbricking trick (QFIL+shorting the two points in the motherboard). I got through with it successfully.
Click to expand...
Click to collapse
congrats.. regardless of your real model you converted your device!
QFIL is nothing an average user should ever do as long as not guided by someone..
what you see in download mode, recovery and android is just software so even when you see IOS v22 there it doesnt mean anything.
what u see in fastboot is true, you have converted your device to a LS991
the very first thing before flashing again random stuff or even worse using QFIL again is: identify your real model (even when now converted).
the only way to do so is to disassemble the device and look whats written on the front of the mainboard (sounds harder then it actually is)
https://www.ifixit.com/Guide/LG+G4+Motherboard+Replacement/51202
Then when you KNOW what you really have we can proceed
.
Okay got it. My original plan was really not to fix it but only to reuse its screen on my H818P (unfortunately, i think it's incompatible). I will look into it (mainboard) when i get home. Thanks Mr. SteadfasterX
@steadfasterX
Here is the sticker at the back of phone (H810)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's the model number written on the mainboard (F500L if i'm looking at the right thing)
rph2012cheme2017 said:
@steadfasterX
Here is the sticker at the back of phone (H810)
Here's the model number written on the mainboard (F500L if i'm looking at the right thing)
Click to expand...
Click to collapse
yep classical Frankenstein. you have a F500 refurbished with a H810 firmware.
you flashed with QFIL the malware LS991 files (yes its known that they are named for several models but many contain the same files - which converts all to LS991).
LS991 has ARB (atm you have an ARB of 2)
F500 and H815 dont have ARB
you cant flash any firmware lower then ARB 2 and so you can never flash F500, H815 or H812 ROMs anymore! (and do not even think about flashing a firmware with an ARB of 3 or higher!)
For getting mobile network signal you need a successfully loaded modem which will never happen anymore as you increased the ARB. that means even when you get your device back to work you will be only able to use it as a tablet (WiFi, BT etc will do but no calling,sms,mobile internet)
ARB? --> https://bit.do/antirollg4
you can bring back life back to this device by:
1) flashing a LS991 rom (ensure you use ARB 2 only)
2) MAYBE !! flashing a H811 rom (as H810 bootloaders are compatible with h811) but ensure you use ARB 2 firmwares only !
If that works: congrats! you can now unlock by a fastboot command and thats your best chance to maybe even get mobile signal back! (no one ever tested that though)
3) you may try to flash H810 10o which has an ARB of 2 and is also a very good chance to bring back life to your device - maybe well I would say very likely the best one!
4) flashing the partions system , modem and boot of any ROM (yes even of a f500,h810,h815... as these single partitions do not increase your ARB) you like within fastboot (yes you can now flash there bc of .. that would take too long. I know you will be able to do so as I use parts of it in UsU)
Consider to use the thanks button on every helpful post
.
you can bring back life back to this device by:
1) flashing a LS991 rom (ensure you use ARB 2 only)
2) MAYBE !! flashing a H811 rom (as H810 bootloaders are compatible with h811) but ensure you use ARB 2 firmwares only !
If that works: congrats! you can now unlock by a fastboot command and thats your best chance to maybe even get mobile signal back! (no one ever tested that though)
3) you may try to flash H810 10o which has an ARB of 2 and is also a very good chance to bring back life to your device - maybe well I would say very likely the best one!
4) flashing the partions system , modem and boot of any ROM (yes even of a f500,h810,h815... as these single partitions do not increase your ARB) you like within fastboot (yes you can now flash there bc of .. that would take too long. I know you will be able to do so as I use parts of it in UsU)
Consider to use the thanks button on every helpful post
.[/QUOTE]
Should i try from 1 to 5 sir if which one will work? or Should i try (3) first since it's the best one. Also, which one would i use to flash, LG UP or the lastest LG Flash Tool? Thank you.
Is it also possible sir that an H810 screen is not compatible with my H818? If I wont be able to use it as a normal phone, i might as well use it's screen on my H818P. I did try but there's no image. The notification lights only flashes color light blue and then the phone powers off (takes 15-20 seconds after clicking the power button).
rph2012cheme2017 said:
Should i try from 1 to 5 sir if which one will work? or Should i try (3) first since it's the best one. Also, which one would i use to flash, LG UP or the lastest LG Flash Tool? Thank you.
Click to expand...
Click to collapse
i would try #3 first.
rph2012cheme2017 said:
Is it also possible sir that an H810 screen is not compatible with my H818? If I wont be able to use it as a normal phone, i might as well use it's screen on my H818P. I did try but there's no image. The notification lights only flashes color light blue and then the phone powers off (takes 15-20 seconds after clicking the power button).
Click to expand...
Click to collapse
yes. the screen for the h818 is incompatible with the h810 one as the h818 uses a different panel then all other 10 g4 models..
steadfasterX said:
i would try #3 first.
It gives an error on both LG FLASH TOOL and LG UP sir.
LG FLASH TOOL
LG UP
G4 Screen
I'll try the other options.
Click to expand...
Click to collapse
Ill try the H811 kdz.
LS991ZV6 (ARB 2) also fails in both LG UP (invalid tot) and LG FLASH TOOL
rph2012cheme2017 said:
LS991ZV6 (ARB 2) also fails in both LG UP (invalid tot) and LG FLASH TOOL
Click to expand...
Click to collapse
I hexedited an H81010o tot to be read as H81510c. Now i can flash it with LG UP. Hope this will revive the phone.
rph2012cheme2017 said:
I hexedited an H81010o tot to be read as H81510c. Now i can flash it with LG UP. Hope this will revive the phone.
Click to expand...
Click to collapse
And it's alive!! Now, how do i bypass this screen?
rph2012cheme2017 said:
And it's alive!! Now, how do i bypass this screen?
Click to expand...
Click to collapse
@steadfasterX can i fastboot flash an F500 modem/radio img. even if i flashed an H81010o firmware in this phone?
rph2012cheme2017 said:
@steadfasterX can i fastboot flash an F500 modem/radio img. even if i flashed an H81010o firmware in this phone?
Click to expand...
Click to collapse
I think i need radio in order to bypass that email verification screen because it emergency call.
rph2012cheme2017 said:
I think i need radio in order to bypass that email verification screen because it emergency call.
Click to expand...
Click to collapse
Why not using Wi-Fi? At least for the moment. No you can't flash the f500 modem partition because it has arb of 0
Sent from my LG-H815 using XDA Labs
steadfasterX said:
So you hexedit the h810 10o and successfully flashed it correct?
Why not using Wi-Fi? At least for the moment. No you can't flash the f500 modem partition because it has arb of 0
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Yes I hexedited the H810 10o tot because it's the only way to flash it in LG UP as LGUP is detecting my phone as H81510C. So i just replaced 1 line in H810 10o into H81510c.
My problem is i need to bypass the email verification screen. I don't know the email that is associated with this phone. Most of the youtube videos i've seen on how to bypass is they use emergency call. When i try it, the phone just says "turning radio on". Any other way to bypass that email verification screen without the use of emergency call? Thanks
@steadfasterX i wasnt able to bypass the email verification but i was able to go to the settings menu. Is it safe to update this phone to marshmallow? It's currently on 5.1 Lollipop. Maybe it will increase ARB so might be a bad idea.

Categories

Resources