Develop Bugs

Installing lastest rom and rooting

Hey guys.
I have installed 6.10.13 MIUI 8.1. When i bought my mi5s phone they installed me that rom and told me that my bootloader is unlocked.
So my question is for someone to write me steps of installing lastest version of european rom. And i didnt find any rooting guide so I would be grateful if someone write me that.
Thanks in advance.

Rooting
You don't have to root the phone to flash custom ROM but be sure that bootloader is unlocked. Boot to fastboot and check: fastboot oem device-info. I have never used Roms from Xiaomi.eu because in general their rooms are Chinese weekly -chinese AP's + more system languages. English is fine for me.
There is a installation guide on site: https://xiaomi.eu/community/threads/6-11-10.36056/

zmajdk said:
You don't have to root the phone to flash custom ROM but be sure that bootloader is unlocked. Boot to fastboot and check: fastboot oem device-info. I have never used Roms from Xiaomi.eu because in general their rooms are Chinese weekly -chinese AP's + more system languages. English is fine for me.
There is a installation guide on site: https://xiaomi.eu/community/threads/6-11-10.36056/
Click to expand...
Click to collapse
Thanks for advice. What rom are you using then?

Tomislav995 said:
Thanks for advice. What rom are you using then?
Click to expand...
Click to collapse
Well, it is a ROM from reseller a modified Chinese I guess. Version 8.0.10.0.0. As everything works fine I will keep it as long as some better alternative comes. I have been reading about the others who switched to original Chinese but afterwards regretted they did it. If I were you, before you try some other ROM, I would flash custom recovery TWRP and save/backup current ROM you have now, just in case.
The other option is to flash original Chinese developer ROM and then root the phone and finally get rid of Chinese thrash.
Best luck!

zmajdk said:
Well, it is a ROM from reseller a modified Chinese I guess. Version 8.0.10.0.0. As everything works fine I will keep it as long as some better alternative comes. I have been reading about the others who switched to original Chinese but afterwards regretted they did it. If I were you, before you try some other ROM, I would flash custom recovery TWRP and save/backup current ROM you have now, just in case.
The other option is to flash original Chinese developer ROM and then root the phone and finally get rid of Chinese thrash.
Best luck!
Click to expand...
Click to collapse
OK. Thanks.
I just realized that they installed me twrp recovery 3.0.2 . Also checked that I have unlocked bootloader .
If I install that weekly rom, what will happen with my data?(will i lose data or it just wipe system and put newer version)
So my last question is how to root mi5s.
I saw in twrp that there is SuperSu option, is this one of ways to root phone?

I prefer eu rom have more optimization just download rom on your phone boot in twrp volume up and power install rom and after that wipe cash data is untouched. Reboot system phone will need some time to boot because it build cash and after that it start to optimize installed applications. It's really simple.
Sent from my MI 5s using Tapatalk
---------- Post added at 09:25 PM ---------- Previous post was at 09:24 PM ----------
For root install latest super su in twrp...
Sent from my MI 5s using Tapatalk

Thanks for answer.
But I want to be sure, Should i install su from twrp or I need to download and put zip in phone and then install?
Sry for being annoying and asking probably stupid question but I dont want to brick my device already hahah.
One more stupid question, I install SU after rom install?

Ok
Always make back up in twrp in case something happen..
I didn't root my phone but i root all phones that i have before.
So install rom first in twrp than flash super su in twrp all zips need to be on phone. I download everything that i need on phone directly...
Sent from my MI 5s using Tapatalk

help neededOneplus3 DECRYPTION UNSUCCESSFULL - RESET PHONE black screen, recoverymode

Hi,
Problem starting oneplus 3, let me explain.
1) purchased oneplus3, 4 months ago.
2) Rooted,updated oxygen 3.2.8 with TWRP recovery3021 and super SU 2.74-2
3) updated oxygen4.00 with twrp32128 and super SU 2.79SR2 everything was fine.
4) Received OTA update through VPN for oxygen 4.0.1 (30mb), installed but unable start instead it was always going into twrp mode.
5) i changed twrp recovery back to 3021 and install stock oxygen 3.2.8,was working fine.
6) Now i wanted to UNROOT the device and back to stock so that i can get OTA Oxygen 4 and 4.0.1.
7) i followed steps below,
a) downloaded oxygen 3.2.1 and stock recovery.img
a) fastbootloader, and connect device.
b) fastboot devices
c) fastboot fastboot flash recovery recovery.img
d) fastboot oem lock - when i used this command and accept YES, screen got black and no further instruction for ADBsideload.
8) i used to restart the device in recovery but black screen, fastboot loader working.
FASTBOOT MODE
PRODUCT NAME - ....
VARIANT - MTP UFS
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - .....
SECURE BOOT - enabled
DEVICE STATE - locked
9) and if i start the device in normal it asked for screen pattern lock but my existing unlock pattern doesnt work.
10) by using all the chance for screen pattern unlock it showed DECRYPTION UNSUCCESSFULL, clicked on RESET PHONE but again screen black in recovery mode.
11) NOW if i start my device it again shows DECRYPTION UNSUCCESSFULL and asking for RESET PHONE......
What to do now.....
regards,
Zahir

use the mega unbrick guide method 2, always work

Don't panic mate!

mirko8054 said:
use the mega unbrick guide method 2, always work
Click to expand...
Click to collapse
Thanks mirko8054, I will let you know soon......

mirko8054 said:
use the mega unbrick guide method 2, always work
Click to expand...
Click to collapse
thanks a lot mirko8054, my oneplus 3 live again, using mega unbrick guide method 2.
appreciated.
at present oxygen3.1.2
how to install latest OTA since it is not showing any update by SYSTEM UPDATES.
my oem lock. I don't know if twrp installed.
how can I check if still my device is rooted.
I don't want to root it, just need OTA update directly.
kindly let me know the steps to update the device by oxygen4.
Many thanks
Zahir

samadayesha said:
thanks a lot mirko8054, my oneplus 3 live again, using mega unbrick guide method 2.
appreciated.
at present oxygen3.1.2
how to install latest OTA since it is not showing any update by SYSTEM UPDATES.
my oem lock. I don't know if twrp installed.
how can I check if still my device is rooted.
I don't want to root it, just need OTA update directly.
kindly let me know the steps to update the device by oxygen4.
Many thanks
Zahir
Click to expand...
Click to collapse
Device is back to stock, this method is used by One plus asstance for unbrick hard bricked device by remote control your PC. Then device is back to completly stock. No root no custom recovery etc. You Can now use OTA for update or using adb sideload or manually flash the entire ROM from sdcard. Thank you for appreciate :good:

mirko8054 said:
Device is back to stock, this method is used by One plus asstance for unbrick hard bricked device by remote control your PC. Then device is back to completly stock. No root no custom recovery etc. You Can now use OTA for update or using adb sideload or manually flash the entire ROM from sdcard. Thank you for appreciate :good:
Click to expand...
Click to collapse
thanks a lot, I will do accordingly.

samadayesha said:
thanks a lot mirko8054, my oneplus 3 live again, using mega unbrick guide method 2.
appreciated.
at present oxygen3.1.2
how to install latest OTA since it is not showing any update by SYSTEM UPDATES.
my oem lock. I don't know if twrp installed.
how can I check if still my device is rooted.
I don't want to root it, just need OTA update directly.
kindly let me know the steps to update the device by oxygen4.
Many thanks
Zahir
Click to expand...
Click to collapse
just wanted to highlight the things you did that caused the issue
1- flashing the stock rom through twrp, it's possible specially with the latest TWR0-11 but not advisable, you better always flash stock recovery and then sideload rom (full rom not update) and then fast boot TWRP back and reflash root... any other method always causes issues...
2- the 30mg updates do not work on a rooted device
3- unrooting without immediately sideloading rom will always cause the black screen and loop to recovery, it's not required to unroot unless you want to go back to full stock experience...
4- this the biggest problem you made, you relocked the devices bootloader, you also did it while the device has a lot of issues (some mentioned above) so the device bricked instantly, if you are planning on unlocking the device again ...NEVER NEVER relock the device again , there's no need to do that , all you need to do to go back to a full stock experience is to wipe everything in TWRP , flash stock recovery then wipe everything again from there, then sideload full rom (latest stable version) , then for good majors in the new rom recovery wipe everything agian and boot to system and from system do a factory reset. then recharge your device to 100% and re encrypt it if it's not...after that you're 100% on a full stock exerience and will receive ota and it'll work... and at that state only (without root or TWRP) you can relock the bootloader (which is gain not necessary at all, there's no benefit to it)

Update to EMUI 8 (Mate SE) after nuking Factory ROM w Twrp?

Pulled kind of a boner. Got a Mate SE yesterday. It came with EMUI 5.1 and Android 7.0. I had read that version was still fairly easy/cheap to unlock the bootloader so I just left it as is without updating anything. Unlocked the bootloader, installed Twrp (to both recoveries) and now am unsure how to proceed with installing custom ROMs because I ended up nuking the factory ROM to install an older AOSP buggy build I found on here.
Didn’t realize that every custom ROM now seems to want you to install via fastboot with EMUI 8 required to have been installed beforehand, but I'm now stuck on this old AOSP ROM with no backup of the original & with Twrp recovery.
Sorry for all the questions but I've flash a million ROMs the old school Twrp ways since forever but this seems like a different beast. Should’ve slowed my roll. Is there some files I can flash via Fastboot or Twrp in order to use these new treble ROMs while keeping my boot loader unlocked? Thanks.

peestandingup said:
Pulled kind of a boner. Got a Mate SE yesterday. It came with EMUI 5.1 and Android 7.0. I had read that version was still fairly easy/cheap to unlock the bootloader so I just left it as is without updating anything. Unlocked the bootloader, installed Twrp (to both recoveries) and now am unsure how to proceed with installing custom ROMs because I ended up nuking the factory ROM to install an older AOSP buggy build I found on here.
Didn’t realize that every custom ROM now seems to want you to install via fastboot with EMUI 8 required to have been installed beforehand, but I'm now stuck on this old AOSP ROM with no backup of the original & with Twrp recovery.
Sorry for all the questions but I've flash a million ROMs the old school Twrp ways since forever but this seems like a different beast. Should’ve slowed my roll. Is there some files I can flash via Fastboot or Twrp in order to use these new treble ROMs while keeping my boot loader unlocked? Thanks.
Click to expand...
Click to collapse
Yes, in order to use the new "gsi" rims you need to do stock firmware upgrade. It is easy to do. But completely different then you seem to be used to , with twrp.
Just search for hwota , and I have a guide thread for 7x (basicly same as mate)

mrmazak said:
Yes, in order to use the new "gsi" rims you need to do stock firmware upgrade. It is easy to do. But completely different then you seem to be used to , with twrp.
Just search for hwota , and I have a guide thread for 7x (basicly same as mate)
Click to expand...
Click to collapse
Thank you. Just getting the files together but a little confused on one part. At the beginning, you say to extract the HWOTA package then put all the downloaded system files into the appropriate folder (HWOTA7 in my case), but at the final step you say to "From in TWRP install sdcard HWOTA--hi6250-7-8.zip", however that is the package we extracted from zip already before?
Does that mean I need to zip it back up with the system files I added in it in order to flash via Twrp? As is its just folders. Thanks. Just want to make sure I get everything right.

peestandingup said:
Thank you. Just getting the files together but a little confused on one part. At the beginning, you say to extract the HWOTA package then put all the downloaded system files into the appropriate folder (HWOTA7 in my case), but at the final step you say to "From in TWRP install sdcard HWOTA--hi6250-7-8.zip", however that is the package we extracted from zip already before?
Does that mean I need to zip it back up with the system files I added in it in order to flash via Twrp? As is its just folders. Thanks. Just want to make sure I get everything right.
Click to expand...
Click to collapse
Should be two folders. One each for 7 and 8. Each with twrp, and no-check recovery . And a zip file.

mrmazak said:
Should be two folders. One each for 7 and 8. Each with twrp, and no-check recovery . And a zip file.
Click to expand...
Click to collapse
Got it all done & went fine. Running Lineage at the moment. You're a life saver man, thanks!

Huawei honor 8x max 4/64 snapdragon chipset??

Hello I'm new to the gsi scene and from what I've checked on this phone is it's gsi compatible,a only,I have the bootloader unlocked through an unlock site,is there any gsi ROMs that will work on this phone?There is no root yet or twrp but if there is a working gsi I could just flash thru fastboot.Any info that anyone could provide would be greatly appreciated thanks!!!!
Sent from my ARE-AL00 using Tapatalk

So long as the ROM works on a Snapdragon 636, it should be fine on the 8x max, though, I thought Huawei weren't providing bootloader unlock codes, for TWRP, anything for a SD636 should work fine, obviously you can't decrypt internal storage (actually, you can, just wipe internal storage from TWRP and encryption is gone), and magisk root should work fine.
Try this TWRP, make sure you have a backup full update ROM to install (DLoad method) if this fails, or have the stock recovery, https://forum.xda-developers.com/redmi-note-5/development/official-twrp-xiaomi-redmi-5-plus-t3727162

ambitiousButRubbish said:
So long as the ROM works on a Snapdragon 636, it should be fine on the 8x max, though, I thought Huawei weren't providing bootloader unlock codes, for TWRP, anything for a SD636 should work fine, obviously you can't decrypt internal storage (actually, you can, just wipe internal storage from TWRP and encryption is gone), and magisk root should work fine.
Try this TWRP, make sure you have a backup full update ROM to install (DLoad method) if this fails, or have the stock recovery, https://forum.xda-developers.com/redmi-note-5/development/official-twrp-xiaomi-redmi-5-plus-t3727162
Click to expand...
Click to collapse
There is a unofficial twrp now just flashed last night all works well,I'm gonna do a backup of the stock rom and try to flash havoc or phsss gsi rom if it fails I'll just restore my backup thanks for the info you provided!!!
Sent from my ARE-AL00 using Tapatalk

hopkins31 said:
Hello I'm new to the gsi scene and from what I've checked on this phone is it's gsi compatible,a only,I have the bootloader unlocked through an unlock site,is there any gsi ROMs that will work on this phone?There is no root yet or twrp but if there is a working gsi I could just flash thru fastboot.Any info that anyone could provide would be greatly appreciated thanks!!!!
Sent from my ARE-AL00 using Tapatalk
Click to expand...
Click to collapse
Can you please share the bootloader unlock method. I have tried dc-unlocker but having trouble paying for the service - my bitcoin service allows a minimum, paysera is not available here, SMS is not available in Canada. I have been installing TWRP and GSI on many devices and this bootloader lock on my Honor 8x Max seems impossible. Can you help?

ultimate / universal root / twrp installation guide?

Hi everyone
Sorry I am confused; there does not seem to be an ultimate universal root / twrp installation guide for the Xiaomi Mi A2 Lite phone (my son's phone) in 2019.
No offense intended but all these various posts on the topic just help to confuse people!
I managed to unlock the bootloader but can anybody please tell me what is the easiest / user-friendliest way to install twrp (which version?) and root the phone so that I may proceed with flashing LineageOS afterwards to get rid of all the bloatware.?
what about these partitions A & B?
Thanks a lot in advance

https://github.com/tkchn/daisyinstall/blob/master/README.md
This is the guide youre looking for

@barumbads: Thank YOU!
[EDIT] er... this is for flashing a custom rom!
I did some extra research out of XDA
[Guide] How to root Xiaomi Mi A2 Lite
and
How To Root Mi A2 / A2 Lite (Magisk) and Install TWRP Recovery
but again... confusing! which one should I go for?
(I already tried the later one and created another post following an issue with it!)

BenG7 said:
which one should I go for?
Click to expand...
Click to collapse
It depends on what you want to do.
Root doesnt need TWRP, just Magisk. There's a guide on here.
Flashing custom ROMs needs TWRP. Each custom ROM has specific instructions.
There's no one-size-fits-all solution for this phone.

a1291762 said:
It depends on what you want to do.
Root doesnt need TWRP, just Magisk. There's a guide on here.
Flashing custom ROMs needs TWRP. Each custom ROM has specific instructions.
There's no one-size-fits-all solution for this phone.
Click to expand...
Click to collapse
Hi @a1291762 & thanks.
This is what I am saying it is confusing; I have been thru a few phones (samsungs, LGs, lately Xiaomi...)
and the process was first install twrp then root and then you could flash roms
I know when you flash LineageOS, you get root included in dev options so from your explanations I will look how to flash LineageOS but currently I'm struggling installing twrp as you have seen in my other post

BenG7 said:
This is what I am saying it is confusing; I have been thru a few phones (samsungs, LGs, lately Xiaomi...)
and the process was first install twrp then root and then you could flash roms
Click to expand...
Click to collapse
My last phone didn't have A/B or encryption or use Magisk for rooting... So for me everything about this phone was new and different.
I started with stock (android one means I didn't immediately want a custom ROM). Then added Magisk. I added TWRP after edxposed caused me bootloops (magisk manager CLI can run from TWRP). I haven't installed a custom ROM yet but I've got a custom splash and bootanim.