dear freinds
I have been given a XDA2 that is dead ,but can enter only usb mode.
So i tried to download 02 UK FINAL 172181-final
but gave 'country error ' 0.0.111
so i downloaded himaupgreadeeut.exe
but when i try to upgrade it says
'
Error 103 rom image not found.
please can someone advise what to do or how to fix.
Thanks
Martin
OK i have manged to update this by putting the hacked version into same folder and have done a successfull rom upgrade and starts up as I MATE
But handset resets itself after 5 minutes.
i have again tried to update to the 02 UK FINAL and now it says
country error N -8-1-1-1
PLEASE help
use different upgrader
hi thee are two himaupgraders one is himaupgrateut and the other is himaupgradeut_noid this doesnt need country code etc
Dear All !! Dear Pof!
I am trying to unlock hTC S620 ,but with no luck!!
when i connect the phone with Active Sync with the softwear and press AUTO_Unlock_v3a it showing me direct the message :
SoftSPL error
Erorr
Insufficient trustlevel.
You need to application unlock your device (or singn executable with privileged cert)
even i did try to past the file SSPL in phone and open it ,it gona say to me the same erorr !!
Please what is this problem is ?
and another think :how can i make hardwear Reset to this model hTC S620? ther is no hole place to press For reset ,could u show me please how to do it .
i am very sad becouse i spend over 5 hours trying to unlock this funny phone!!!
please help!!
Thanks.
Well, I recently brought a O2 XDA II MINI (second handed) and windows mobile 6 was installed on it. One night my brother tried to access my O2 and he entered many wrong codes and it seems when I enters the correct code also it don’t respond any more
WHEN MY PHONE BOOTS UP
http://img119.imageshack.us/my.php?i...0088466hk2.jpg
On the lest top corner :
IPL 2.06.0001
SPL 2.06.0001
GSM 02.19.21
OS 4.0.0.0
THIS IS THE SCREEN WHERE I TYPED MY PASSWORD AND NOTHING HAPPENED
http://img119.imageshack.us/my.php?i...9763638do4.jpg
I cant even access from My Vista Installed Laptop also .. I get the error like below
http://img61.imageshack.us/my.php?image=41085169xf2.jpg
PLEASE HELP ME UNBRICK THIS PHONE!!
Edit/Delete Message
Hello,
I have a problem with my HTC touch pro 2. it's impossible to conect with active sync.
I run on XP.
I try different cable.
I reinsal active sync 4.5 without sucess.
I hard reset the phone too. ( no restriction with the other service, the phone recognize my provider )
The phone is a AT&T phone . the phone provider is " Base ,Jim Mobile " Belgium.
I try with two sim card
In the first sim card : when i try a " data connection " : " dialed : cannot connect for an unknow reason
For the second , in the com manager, when i try a " data connection " to On : answering modem has disconnected... and when i clik on settings it's possible to change but i have a windows with " there is a problem connecting to the gprs service registered home network "
I just want to have a connection to hard-spl flash . with a FR rom.
a lot of thank to yours informations.
If someone know how i can load the hardspl and an FR rom without active sync ( with a sd card for exemple )
H0rnet2 said:
If someone know how i can load the hardspl and an FR rom without active sync ( with a sd card for exemple )
Click to expand...
Click to collapse
I would say try another computer, try another USB port...
You need ActiveSync. You can undo HSPL and flash ROM's via the SD card... but to do the initial HSPL, you need to do it thru USB RUU.
I try on a laptop and it's the same... i connect a HTC tytn2 and it's work immediately.
i found some problem of configuration if you look after " AT&T " network configuration problem ...but no real solution with my problem
I try the bootloader mode but it's on " serial mode " no " usb mode " ( with the cable or not )
informations on bootloader :
security unlocked
RHOD100 32 M
SPL - 085 Olinex
( that last information mean that it's already unlocked and hard spl done ... i didn't know it but doesn't resolve the problem )
i try without sim card ...
when i try to put " data connection " on " . it's ask " network log on " " user , password and domain "
when i check thoses informations on my htc Tytn2 . it's no needed and it's connect correctly.
I flash the htc with a rom fr , i use the sd card method.
i have the fr rom , great. but still not connect with active sync
Maybe you have a bad USB port on the phone. I had one that would charge, but would not transmit data.
Is it possible that the problem coming from my pc ? because this phone is near from new ( some hours of utilisation )
H0rnet2 said:
Is it possible that the problem coming from my pc ? because this phone is near from new ( some hours of utilisation )
Click to expand...
Click to collapse
You were already told to try another computer. If you have not followed the suggestions already provided, then there is nothing more we can do to help you.
I dit it. i just said that is possible that is from the registrer key ( i saw that some problems was resolve like that ) . i don't think you represent all this forum ... so if someone have another idea ...
found on xda ...Same problem with active sync but different htc ... the flash is done but no changement
Ok people, I've sorted it out ... Lucky me - no faulty usb port on HD2, no faulty cable, and, no faulty HD2 ... I've flashed a different radio from sd card, and also rom, and now - connectivity with my pc is - never better ... Even ActiveSync is working like it hasn't been in 6 months, hahahhhh ... Point is - it was my pc punishing me for playing with it's registry, few nights before ... I was really confused, cause HD7 had excellent connectivity with my pc, but HD2 really bad, so I really thought there was something wrong with my beloved HD2 ... Than, I remembered I've messed with my registry the other night, and deleting some non-existing pocket pc paths in it... So, I repaired my windows on pc, and now everything works like a charm .... What can I say - curiosity can have very high price, sometimes .... But - fortunately I'm lucky, as it gets
Click to expand...
Click to collapse
H0rnet2 said:
I dit it. i just said that is possible that is from the registrer key ( i saw that some problems was resolve like that ) . i don't think you represent all this forum ... so if someone have another idea ...
found on xda ...Same problem with active sync but different htc ... the flash is done but no changement
Click to expand...
Click to collapse
I am glad to stop offering ideas. Sorry to have been such a bother.
I will let the rest of the forum represent themselves I guess. :silly:
No problem . thank you all for your time to reply and try to find a solution . i give up ,it's not a big problem i'll use it without active sync .. my goal was to flash in FR ...So
Hi everyone ,
(first sorry for my bad english)
i got a g8 rio-l01 with a few problem ( no imei , no sn , no wifi and bt mac adresse) all this problem was solved using the hcu tool
but the biggest problem is the phone boot in a factory mode ,i can see this in the projectmenu>veneer informaton>other info>run mode: factory
so in this mode :
1-i have no shortcut panel and notification panel when i slide from up to down nothing come
2-no signial or network conection
3-in the first home page in the phone i have MMIs app/software upgrade/MMI/projectmenu/MMIa,
in the second one i have runningtest3
in the last one basic android app
4-i can't use keyboard
so i have trayed i think all huawei g8 firmware and nothing change
trayed with DC phoenix methode (the two methode) and same problem
trayed with the original soft (RIO-L01_M105_Board Software_general_Android 5.1_EMUI 3.1_05021TJY) and no change
trayed with l02 ,l03 ,tl00 ,slim6 and cm13 and the problem persist
bootloader and frp are unlocked ,sim too with hcu and phone rooted
if i remove appfac from user data and reboot the keyboard Appears and other app Appears but the phone stay in factory mode with no upper pannel and no network signial
i can use wifi and bt
in fastboot getvar pruduct give msm8916 (it's normal??? the phone is an msm8936)
i think there is a currupted or a missing file or partition
i have all factory flash file
bootloaderimage: huawei_msimage.mbn, MPRG8936.mbn (i don't know how tu use this two files)
fastbootimage: boot.img, ,cache.img ,cust.img ,emmc_appsboot.mbn ,erecovery.img ,frp.img ,fs_image.tar.gz.mbn.img ,gpt_both0.bin ,hyp.mbn ,log.img ,misc.mbn ,modem_st1.mbn ,modem_st2.mbn ,NON-HLOS.bin ,oeminfo.mbn , persist.img ,recovery.img ,rpm.mbn ,sbl1.mbn ,system.img ,tz.mbn,userdata.img ( and all crc file )
any idea are welcome
thank you
Hi again
So after many test ( and break and unbreak the soft many times) by editing prop and conf files, i noticed that the ro.runmode is the command controling the boot mode.
But i don't know were is this command and if it's possibol:
- To force ro.runmode=normal?
- Or any solution to by pass runningtest3 app or to fake the result?
Thank you (any help are welcome i don't worry about bteaking the phone)
Finally the phone is fully dead ?
After many flash factory, stock and custom i decided to find the way to enter to hs-usb 9008 mode and i find,by flashing the phone with cherry honor 4 rom. And the phone rebooted in 9008 mode, than flashed the ddr and the msm8936 file with zte tool. The msm will not finish and the phone reboot in fastboot (with red, green,blue screen) than reflashed factory rom with dc unlocker the phone rebooted normal but with the same problem that i have in the first.
Second try, flashed with cherry, entred 9008 mode,reflashed with zte tool (by error used a bad msm8936 file from lenovo)
And the phone stop working not detected and black screen
Third try, desassemled the phone, removed battery find test point after many risky test,the phone boot again in 9008 mode.
Reflashed with zte tool, enter red green blue fastboot, and decided to reflash all the factory with fastboot flashall méthode to unbrick an msm8916. Fastboot finish with many failed.
The phone rebooted but black screen and blinking led with continus (red,blue, green), not detected in pc, trayed with test point and nothing
I think it's fully dead now
Sorry for all this long text but just to share expérience
Thank you
And no it's not dead ðŸ˜, find the way to boot it again in 9008 mode with shorting two test point
Here we go for other test
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
xzanium said:
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
Click to expand...
Click to collapse
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
How To Get Oeminfo
makabress said:
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
Click to expand...
Click to collapse
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
hellowbd said:
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
Click to expand...
Click to collapse
Hi , i found the oeminfo searching in google. I will try to find it again
hello
i a have the same prolem but i cant find "the service rom" too, my phone is stuck in mode 9008 i tried to do the rom by myself but witouth any succes.... i read in a post that i cant try to put the "Huawei_Honor_Cherry_L04_V100R001C900B150_India_4.4.4_EMUI_3.0_05021SLQ" who has the same structure but cannot flash phone said "bootloaderimage" fail
please anyone can help me? i am 2 months witout phone... sorry about my bad english im a spanish guy
rio-l01 test point
hi, please i can't found rio-l01 test point can you help me
rmili25 said:
hi, please i can't found rio-l01 test point can you help me
Click to expand...
Click to collapse
test point are in the left/right side of the display connector, you can use a small wire to short it
JoseBankai said:
test point are in the left/right side of the display connector, you can use a small wire to short it
Click to expand...
Click to collapse
thank you brother
please i have the same problem ( rio-l01 no service no call ) can you help me please by oeminfo file or other things
excuse me i'am bad in english
still having the same problem, no solution, try to resoldering emmc, processor, voltage are ok, everything works in other board, so the problem is still the **** mode 9800 and the vanished "service rom" (not trully vanished but every service that i call to fix this ask me for a lot of money just to fix 1 phone... not worth it..) hope somebody can explain this at least, and why is happening, maybe one day can recovery my data on thtat phone....