Hello,
I have a problem with my HTC touch pro 2. it's impossible to conect with active sync.
I run on XP.
I try different cable.
I reinsal active sync 4.5 without sucess.
I hard reset the phone too. ( no restriction with the other service, the phone recognize my provider )
The phone is a AT&T phone . the phone provider is " Base ,Jim Mobile " Belgium.
I try with two sim card
In the first sim card : when i try a " data connection " : " dialed : cannot connect for an unknow reason
For the second , in the com manager, when i try a " data connection " to On : answering modem has disconnected... and when i clik on settings it's possible to change but i have a windows with " there is a problem connecting to the gprs service registered home network "
I just want to have a connection to hard-spl flash . with a FR rom.
a lot of thank to yours informations.
If someone know how i can load the hardspl and an FR rom without active sync ( with a sd card for exemple )
H0rnet2 said:
If someone know how i can load the hardspl and an FR rom without active sync ( with a sd card for exemple )
Click to expand...
Click to collapse
I would say try another computer, try another USB port...
You need ActiveSync. You can undo HSPL and flash ROM's via the SD card... but to do the initial HSPL, you need to do it thru USB RUU.
I try on a laptop and it's the same... i connect a HTC tytn2 and it's work immediately.
i found some problem of configuration if you look after " AT&T " network configuration problem ...but no real solution with my problem
I try the bootloader mode but it's on " serial mode " no " usb mode " ( with the cable or not )
informations on bootloader :
security unlocked
RHOD100 32 M
SPL - 085 Olinex
( that last information mean that it's already unlocked and hard spl done ... i didn't know it but doesn't resolve the problem )
i try without sim card ...
when i try to put " data connection " on " . it's ask " network log on " " user , password and domain "
when i check thoses informations on my htc Tytn2 . it's no needed and it's connect correctly.
I flash the htc with a rom fr , i use the sd card method.
i have the fr rom , great. but still not connect with active sync
Maybe you have a bad USB port on the phone. I had one that would charge, but would not transmit data.
Is it possible that the problem coming from my pc ? because this phone is near from new ( some hours of utilisation )
H0rnet2 said:
Is it possible that the problem coming from my pc ? because this phone is near from new ( some hours of utilisation )
Click to expand...
Click to collapse
You were already told to try another computer. If you have not followed the suggestions already provided, then there is nothing more we can do to help you.
I dit it. i just said that is possible that is from the registrer key ( i saw that some problems was resolve like that ) . i don't think you represent all this forum ... so if someone have another idea ...
found on xda ...Same problem with active sync but different htc ... the flash is done but no changement
Ok people, I've sorted it out ... Lucky me - no faulty usb port on HD2, no faulty cable, and, no faulty HD2 ... I've flashed a different radio from sd card, and also rom, and now - connectivity with my pc is - never better ... Even ActiveSync is working like it hasn't been in 6 months, hahahhhh ... Point is - it was my pc punishing me for playing with it's registry, few nights before ... I was really confused, cause HD7 had excellent connectivity with my pc, but HD2 really bad, so I really thought there was something wrong with my beloved HD2 ... Than, I remembered I've messed with my registry the other night, and deleting some non-existing pocket pc paths in it... So, I repaired my windows on pc, and now everything works like a charm .... What can I say - curiosity can have very high price, sometimes .... But - fortunately I'm lucky, as it gets
Click to expand...
Click to collapse
H0rnet2 said:
I dit it. i just said that is possible that is from the registrer key ( i saw that some problems was resolve like that ) . i don't think you represent all this forum ... so if someone have another idea ...
found on xda ...Same problem with active sync but different htc ... the flash is done but no changement
Click to expand...
Click to collapse
I am glad to stop offering ideas. Sorry to have been such a bother.
I will let the rest of the forum represent themselves I guess. :silly:
No problem . thank you all for your time to reply and try to find a solution . i give up ,it's not a big problem i'll use it without active sync .. my goal was to flash in FR ...So
Related
i Have PW10B1 With Sd-Card 256
i moved to a place in Middle East and i sure its not workin there cause its locked with T-Mobile and i cant call T-Mobile For help cause i got it as a used PPC.
Now i need to ask about the cradle i have whish i bought with it
here its http://www.eforcity.com/dhantreocra1.html or find it in
www.insten.com , sure its not its original cradle but it works fine when i plug it to my laptop through USB but all its does is charging not sync so no Operation system ( 98 . xp all edition feel it or even tell me that i pluged **** on my USB ) but only charginf fine
now i cant use all tools mentioned on this website for reason connecting to , my PDA
SO IF THERES A WAY TO TELL ME HOW TO ACTIVATE MY CRADLE TO SYNC ON MY PC OR UNLOCKING MY PDA THROUGH SD-CARD WITHOUT CABLES
ROM VER 4.01.16 ENG
ROM DATE 02/04/04
RADIO VER 6.25.02
PROTOCOL VER 324E4
install activesync from ms
then you should be able to sync
PW10B1 is a dualband phone and only works on 900/1900 networks
if the country where you are now have 900/1800 then you can only use the phone on 900 and if your cellphone network dont use 900 you cant use it at all
if the problem truely is that it's locked and not just incompatible with the network then read here
http://wiki.xda-developers.com/index.php?pagename=XDAunlock
Rudegar said:
if the problem truely is that it's locked and not just incompatible with the network then read here
http://wiki.xda-developers.com/index.php?pagename=XDAunlock
Click to expand...
Click to collapse
This will not work for you, cause you're heaving the wrong ROM and Radio-Version on your device. You have to follow this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2
Stefan
tHANK fOR qUICK rEPLY
i TRIED THE xda unlock but allways give me the erorr message ?( error getting unlock code )
i think the seconed reply may help but i dont know how to use Activesync when i dont have cables and i mean no cables so all i have is my SDCARD
also downloaded specialnewrom1.2 and they said i can copy it to my sd card but dont know how
thanks
well asuming that you dident have the xda1 connected to the pc and ran the program to unlock it and it gave you that error then thats pretty normal
it would require the xda1 to be connected in order to unlock it
you get things to your sd card if you cant connect your xda1 to your pc by using a SD card reader which is plug'd into the usb port of the pc
Wohooooooooooooooo
Yeah i unlocked it ans installed new rom the special one by xda developers and it works great , woooooooohoooooooooo
going to paypal to donat
Thank u all for help n support
Re: tHANK fOR qUICK rEPLY
ticoman said:
i think the seconed reply may help but i dont know how to use Activesync when i dont have cables and i mean no cables so all i have is my SDCARD
also downloaded specialnewrom1.2 and they said i can copy it to my sd card but dont know how
thanks
Click to expand...
Click to collapse
So, if you have no connection between your XDA and your PC you have to try it skipping step
5 + 6
In step 7 you have to flash via SD-Card
Step 11 and 15 have to be done by copying via SD-Card......
Should work all fine.
Only additional requirement is an external SD-Card Reader/writer cause most internal makes problems....
Stefan
could anyone help me out of a mess please , i have recently purchased an mda3 to replace my xda2 , i unlocked the phone which went ok but wouldnt accept my o2 sim , being the same phone as the xda2s i thought maybe it would need the o2 windows version rom on , i selected the wrong rom from my pc and the upgrade stopped after a few seconds stating it was the wrong version but now the phone has no rom on at all just a dark screen with "serial" or "usb" if it is docked . Have i done permanent damage ? any help would be very much appreciated
Your phone is currently in bootloader mode - if you have a valid ROM for your device you should be able to flash it with the phone in the USB cradle (the dark screen should change to USB).
If you don't have a valid ROM, go check out the wiki, there's plenty to choose from there!
many thanks forza , as u can prob guess im new at this !
sorry to be a pain forza but unsure which files on the ftp to use , doesnt have to be the latest rom i just need it to work again , could you also tell me how to execute the files , do they load from the desktop , many thanks bren the amatuer
This page on the wiki lists the available original ROM packages;
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The T-Mobile UK one (1.42) is the latest version ROM (3rd on the list), so I'd recommend you start with that (it's the one I use).
[EDIT] just noticed you're showing as being on O2, further down the list (almost at the bottom of the first section) there's a UK O2 ROM - that may be better for you.
With the phone docked in the cradle (with USB showing on the screen), you can just the run the exe you downloaded and it should flash it for you.
thanks forza ! your a star worked a treat
qtek 9090 with USB V2.06 message error
I have the same problem with my qtek 9090, but I dont can sync my pocket pc. I see only USB V2.06 if the pocket is full charged ( and serial if not on the crable connected ).
Why I can not sync this with my laptop??
I have make a hard reset but still not work!!!
please help me
I have read many post but nothing found...
thank you
scharmander ( newbee )
sorry to open a new thread for a probably rare issue , but my problem seems to be NOT related to a particular ROm.
I have my p3660 perfectly running with Mun 2.01 TE WWE WM6 ROM .
I tried many times to update to one of the new roms available in thiese days (both WWE and Italian ROMs )
everytime I'm blocked by the same problem during the upgrading procedure :
I try to describe what happen :
1) the device is connected to the PC with AS 4.5 and the sync is completed.
2) After having launched " romupgradeutility" , the sequence of three steps seems to be ok and I arrive to see the page where there is the bar graph starting a 0% and the recommendation " do not disconnect the device ..."
3) nothing happens for 10-15 seconds
4) A warning message referring to " error 202" arrive ; it seems that the device is not connected to the PC , but in reality the device IS connected and IS NOT in bootloader mode. The device is perfectly running as in any other normal sync session .
So , this stops the upgrade procedure
If I repeat the same from 1) , same result
In the past ( and the last !) rom upgrade , I remember I was forced to restart after the bootloader mode arrived into the device , but this is not the case.
I tried :
a) soft rest the device
b) restart PC
c) reinstall AS on the PC
4) change the cable ..
with out any result
( PC with XP )
Thanks in advance for any support/suggestion/help
please help !!
any idea or suggestion ?
Bootloader Mode
Try removing the cable and plugging back in. That helped me..
Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.
Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.
Power+Camera+reset button with ur touch pen
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734
manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!
Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.
problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx
slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life
i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english
hi all
it is been 3 full days now that i am searching a solution for my XDA EXEC to be live again as i used PM - e-mails every thing and YES been through all the thread before posting this thread with no LUCK...
the problem is my UNI was working fine with TML 8.5... great until i tried to downgrade to TML 7. something ... in the middle the active sync suddenly diss-appeared and i had (serial on top of the screen and V1.00 on the Bottom)
ok now YES i have read that it will switch to USB on top when i will connect it to a PC running Win-XP and i will be able to use MTTY ...or update the ROM again after flashing the DOC... but yet again when i connect to my LAPTOP or PC there is nothing on the screen change .... MTTY never gives me the USB option to connect to my UNI's Boot Loader...
i tried each and every thing i read on this forum... but all in vain ... i am a blackberry user but heard some good features of UNI like Terminal window and more so just had the device .. but stuck.....
can anyone just let me know that is there any hope for me in this device or its just another paperweight now ...
waiting for replies
Regards
Zeeshan
whispers1 said:
hi all
it is been 3 full days now that i am searching a solution for my XDA EXEC to be live again as i used PM - e-mails every thing and YES been through all the thread before posting this thread with no LUCK...
the problem is my UNI was working fine with TML 8.5... great until i tried to downgrade to TML 7. something ... in the middle the active sync suddenly diss-appeared and i had (serial on top of the screen and V1.00 on the Bottom)
ok now YES i have read that it will switch to USB on top when i will connect it to a PC running Win-XP and i will be able to use MTTY ...or update the ROM again after flashing the DOC... but yet again when i connect to my LAPTOP or PC there is nothing on the screen change .... MTTY never gives me the USB option to connect to my UNI's Boot Loader...
i tried each and every thing i read on this forum... but all in vain ... i am a blackberry user but heard some good features of UNI like Terminal window and more so just had the device .. but stuck.....
can anyone just let me know that is there any hope for me in this device or its just another paperweight now ...
waiting for replies
Regards
Zeeshan
Click to expand...
Click to collapse
Before you tried MTTY did you remove the sim and sd card? Sometimes that works to make the usb option to show.
notime2d8 said:
Before you tried MTTY did you remove the sim and sd card? Sometimes that works to make the usb option to show.
Click to expand...
Click to collapse
yes i did removed the sim card and SD card from my UNI...
i think ppl are busy and even this thread is having 60 views but only 1 reply.....
waiting for mod.. to look in to this thread ..
regards
open MS ActiveSync - > File - > Connection Settings - > uncheck the column allow USB connections
or end process WCESCOMM.EXE in task manager on your computer !! so MTTY will recognize your device via USB
Hakim Rahman said:
open MS ActiveSync - > File - > Connection Settings - > uncheck the column allow USB connections
or end process WCESCOMM.EXE in task manager on your computer !! so MTTY will recognize your device via USB
Click to expand...
Click to collapse
tried already but my problem is my device is not switching from serial to USB whic it should be when i connect it to USB cable.......
still waiting for some good answers :-w
seems USB connetor on your device is damaged, why you don't try to flash rom via SD/MMC ?? if you interest to try proper follow Guide by tomal at http://forum.xda-developers.com/showthread.php?t=393370&highlight=flash+sd+card
Hakim Rahman said:
seems USB connetor on your device is damaged, why you don't try to flash rom via SD/MMC ?? if you interest to try proper follow Guide by tomal at http://forum.xda-developers.com/showthread.php?t=393370&highlight=flash+sd+card
Click to expand...
Click to collapse
yeah i am also having the same idea .. thanks for solution hakim but the "file not found" error is teasing me on the given link of yours..... can u upload the tool for me here in this thread???
whispers1 said:
yeah i am also having the same idea .. thanks for solution hakim but the "file not found" error is teasing me on the given link of yours..... can u upload the tool for me here in this thread???
Click to expand...
Click to collapse
no problems ! Here tools you want
Hakim Rahman said:
no problems ! Here tools you want
Click to expand...
Click to collapse
yeah hakim i downloaded the tool and followed the instructions but my xda is still in boot loader mood and not even loading from sd i mean not even looking in to the sd card i have tried 3 different cards 128/512/64 mb 2 mmc and 1 sd ... but result in same ...
i more thing i before this happen i used the active sync and was working fine ..i took the device to a repair shop he said the hardware boot loader is to be repaired and will be charged 3000 PKR for that...
any suggestion
regards
Zeeshan
hakim are you still there ????
whispers1 said:
hakim are you still there ????
Click to expand...
Click to collapse
of course I'm still here!! how, what progression there with your device ??
Hakim Rahman said:
of course I'm still here!! how, what progression there with your device ??
Click to expand...
Click to collapse
nothing as yet .. i tried with the tool you posted in your previous post but still the same result the device is not even looking in to the SD card and just getting all the way to the boot loader with "serial on top and V1.0 at the bottom.
is there any hope...?????
Try to flash it with some original WM5 ROM (search for shipped WM5 roms) via SD card method
Win_XP said:
Try to flash it with some original WM5 ROM (search for shipped WM5 roms) via SD card method
Click to expand...
Click to collapse
tried to search for WM5 for XDA with No Luck as only for ATOM is available .....
Have a look on my sig link, you may find it over there
Hi whispers1 !! you'd better try to follow existing guidance on http://forum.xda-developers.com/wiki/index.php?title=Universal_Problems
I wish you be able connection via activesync and can do flash rom again
Hakim Rahman said:
Hi whispers1 !! you'd better try to follow existing guidance on http://forum.xda-developers.com/wiki/index.php?title=Universal_Problems
I wish you be able connection via activesync and can do flash rom again
Click to expand...
Click to collapse
still no luck i tried to exit boot loader but failed with an error saying no USB device found please reconnect...
hakim can you please be specific that if i get my usb post repaired will it be detected by my system?
is there any boot repair in hardware?
what your PC have an anti virus and fire wall is active?? if true, do not be turned on and then try again for connecting your device to a PC
Hakim Rahman said:
what your PC have an anti virus and fire wall is active?? if true, do not be turned on and then try again for connecting your device to a PC
Click to expand...
Click to collapse
yes my pc was having and antivirus and firewall and i disabled both before connecting the device and got the same message that the device was not recognized .....