UpGrade problems - P3600 ROM Development

sorry to open a new thread for a probably rare issue , but my problem seems to be NOT related to a particular ROm.
I have my p3660 perfectly running with Mun 2.01 TE WWE WM6 ROM .
I tried many times to update to one of the new roms available in thiese days (both WWE and Italian ROMs )
everytime I'm blocked by the same problem during the upgrading procedure :
I try to describe what happen :
1) the device is connected to the PC with AS 4.5 and the sync is completed.
2) After having launched " romupgradeutility" , the sequence of three steps seems to be ok and I arrive to see the page where there is the bar graph starting a 0% and the recommendation " do not disconnect the device ..."
3) nothing happens for 10-15 seconds
4) A warning message referring to " error 202" arrive ; it seems that the device is not connected to the PC , but in reality the device IS connected and IS NOT in bootloader mode. The device is perfectly running as in any other normal sync session .
So , this stops the upgrade procedure
If I repeat the same from 1) , same result
In the past ( and the last !) rom upgrade , I remember I was forced to restart after the bootloader mode arrived into the device , but this is not the case.
I tried :
a) soft rest the device
b) restart PC
c) reinstall AS on the PC
4) change the cable ..
with out any result
( PC with XP )
Thanks in advance for any support/suggestion/help

please help !!
any idea or suggestion ?

Bootloader Mode
Try removing the cable and plugging back in. That helped me..

Related

please can anyone help! mda 3 failed rom update

could anyone help me out of a mess please , i have recently purchased an mda3 to replace my xda2 , i unlocked the phone which went ok but wouldnt accept my o2 sim , being the same phone as the xda2s i thought maybe it would need the o2 windows version rom on , i selected the wrong rom from my pc and the upgrade stopped after a few seconds stating it was the wrong version but now the phone has no rom on at all just a dark screen with "serial" or "usb" if it is docked . Have i done permanent damage ? any help would be very much appreciated
Your phone is currently in bootloader mode - if you have a valid ROM for your device you should be able to flash it with the phone in the USB cradle (the dark screen should change to USB).
If you don't have a valid ROM, go check out the wiki, there's plenty to choose from there!
many thanks forza , as u can prob guess im new at this !
sorry to be a pain forza but unsure which files on the ftp to use , doesnt have to be the latest rom i just need it to work again , could you also tell me how to execute the files , do they load from the desktop , many thanks bren the amatuer
This page on the wiki lists the available original ROM packages;
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The T-Mobile UK one (1.42) is the latest version ROM (3rd on the list), so I'd recommend you start with that (it's the one I use).
[EDIT] just noticed you're showing as being on O2, further down the list (almost at the bottom of the first section) there's a UK O2 ROM - that may be better for you.
With the phone docked in the cradle (with USB showing on the screen), you can just the run the exe you downloaded and it should flash it for you.
thanks forza ! your a star worked a treat
qtek 9090 with USB V2.06 message error
I have the same problem with my qtek 9090, but I dont can sync my pocket pc. I see only USB V2.06 if the pocket is full charged ( and serial if not on the crable connected ).
Why I can not sync this with my laptop??
I have make a hard reset but still not work!!!
please help me
I have read many post but nothing found...
thank you
scharmander ( newbee )

Trying to Upgrade ( Flash ) and now I am stuck in Bootloader

I tried the Upgrade, but it did never start, so when I tried to get it back to normal, doing a reset, I only get the Bootloader screen, with the USB and v0.60, I tried a Soft and Hard Reset but nonthing, I have tired to re-flash it again, but also nothing, please any help, thanks
I can not even to start the Flash program, I get ERROR : 101
ERROR 101 : CONNECTION ERROR
PLEASE ANY ADVICE IS WELCOME, THANKS
I WAS ABLE TO REFLASH IT, BUT I STILL GET TO BOOTLOADER ONLY
PLEASE HELP
latest ActiveSync installed? Removed battery?
Had this issue Yesterday. Even if You update the ROM, You will still stay in bootloader (for me it was like this). Do another update, this time only the radio (so delete ms_.nbf and nk.nbf from the directory from where You run your upgrade utility). After this (another 20 minutes) You should be able to have result after the cold-reset.
On the bootloader there is a small difference. Upgrading the ROM shows how far he actually is (in percentage), whilst upgrading Radio it does not show You the percentage, only that he is busy.
Ruud
Just try the update without any insert card (sd and sim), and a wonder will happen!
Teja
- connect the JASJAR with your PC using the USB cable. Activesync will NOT start and the XP says does recognize it
- do a HardReset (press the 2 (-) in the keyboard and softrest it all at the same time. Hardreset screen appears (DON'T press 0 or X..)
- start the update program. Please use a good upgrade like the latest from imate ftp://ftp.clubimate.com/JASJAR_WWE_11353_137_10301.zip
- start the update and when it's looking to check the version of the JASJAR softreset it
It should start to reflash it without problems.
I hope it helps...

Universal Dead flashing

Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.

Upgrading without activesync

After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
Edit/Delete Message
i sugest you ask here
http://forum.xda-developers.com/forumdisplay.php?f=293
as more % of the readers of that forum have the same device as
you then this forum
All is OK , Thank's
Yes thank's, i found a ROM that don't need activesync , after that changing that rom by my rom and at the moment my s200 y ok.
Thank's.
tehe same problem
hi
i have a qtek 8310 and have the same problem that u, could u tell me what kind of rom does not need activesync, please?
thanks a lot
Indeed, I have the same problem with my S200, please explain what you did to fix your phone!
For those interrested: I've found the following text in the readme file of the regular ROM updaters (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID in this case):
8. Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now?
A: If the update process has failed, you will see that your device will always boot in three-color mode. It’s normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer.
1. Disconnect your PDA Phone from the USB cradle/cable.
2. Reset your PDA Phone.
3. Reconnect your PDA Phone to the USB cradle/cable.
4. Check that the communication cradle/cable is connected properly.
5. Return to the ROM Update Utility.
Note: You should ignore the ActiveSync connection.

Impossible Conect to Active Sync

Hello,
I have a problem with my HTC touch pro 2. it's impossible to conect with active sync.
I run on XP.
I try different cable.
I reinsal active sync 4.5 without sucess.
I hard reset the phone too. ( no restriction with the other service, the phone recognize my provider )
The phone is a AT&T phone . the phone provider is " Base ,Jim Mobile " Belgium.
I try with two sim card
In the first sim card : when i try a " data connection " : " dialed : cannot connect for an unknow reason
For the second , in the com manager, when i try a " data connection " to On : answering modem has disconnected... and when i clik on settings it's possible to change but i have a windows with " there is a problem connecting to the gprs service registered home network "
I just want to have a connection to hard-spl flash . with a FR rom.
a lot of thank to yours informations.
If someone know how i can load the hardspl and an FR rom without active sync ( with a sd card for exemple )
H0rnet2 said:
If someone know how i can load the hardspl and an FR rom without active sync ( with a sd card for exemple )
Click to expand...
Click to collapse
I would say try another computer, try another USB port...
You need ActiveSync. You can undo HSPL and flash ROM's via the SD card... but to do the initial HSPL, you need to do it thru USB RUU.
I try on a laptop and it's the same... i connect a HTC tytn2 and it's work immediately.
i found some problem of configuration if you look after " AT&T " network configuration problem ...but no real solution with my problem
I try the bootloader mode but it's on " serial mode " no " usb mode " ( with the cable or not )
informations on bootloader :
security unlocked
RHOD100 32 M
SPL - 085 Olinex
( that last information mean that it's already unlocked and hard spl done ... i didn't know it but doesn't resolve the problem )
i try without sim card ...
when i try to put " data connection " on " . it's ask " network log on " " user , password and domain "
when i check thoses informations on my htc Tytn2 . it's no needed and it's connect correctly.
I flash the htc with a rom fr , i use the sd card method.
i have the fr rom , great. but still not connect with active sync
Maybe you have a bad USB port on the phone. I had one that would charge, but would not transmit data.
Is it possible that the problem coming from my pc ? because this phone is near from new ( some hours of utilisation )
H0rnet2 said:
Is it possible that the problem coming from my pc ? because this phone is near from new ( some hours of utilisation )
Click to expand...
Click to collapse
You were already told to try another computer. If you have not followed the suggestions already provided, then there is nothing more we can do to help you.
I dit it. i just said that is possible that is from the registrer key ( i saw that some problems was resolve like that ) . i don't think you represent all this forum ... so if someone have another idea ...
found on xda ...Same problem with active sync but different htc ... the flash is done but no changement
Ok people, I've sorted it out ... Lucky me - no faulty usb port on HD2, no faulty cable, and, no faulty HD2 ... I've flashed a different radio from sd card, and also rom, and now - connectivity with my pc is - never better ... Even ActiveSync is working like it hasn't been in 6 months, hahahhhh ... Point is - it was my pc punishing me for playing with it's registry, few nights before ... I was really confused, cause HD7 had excellent connectivity with my pc, but HD2 really bad, so I really thought there was something wrong with my beloved HD2 ... Than, I remembered I've messed with my registry the other night, and deleting some non-existing pocket pc paths in it... So, I repaired my windows on pc, and now everything works like a charm .... What can I say - curiosity can have very high price, sometimes .... But - fortunately I'm lucky, as it gets
Click to expand...
Click to collapse
H0rnet2 said:
I dit it. i just said that is possible that is from the registrer key ( i saw that some problems was resolve like that ) . i don't think you represent all this forum ... so if someone have another idea ...
found on xda ...Same problem with active sync but different htc ... the flash is done but no changement
Click to expand...
Click to collapse
I am glad to stop offering ideas. Sorry to have been such a bother.
I will let the rest of the forum represent themselves I guess. :silly:
No problem . thank you all for your time to reply and try to find a solution . i give up ,it's not a big problem i'll use it without active sync .. my goal was to flash in FR ...So

Categories

Resources