Develop Bugs

off t989

hello my friends
i flash t989 with odin3 v1.83 but error when falsh
and this is my log
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T989UVKL1_HOME_SGH-T989user_CL799405_REV00.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.img
<ID:0/017> recovery.img
<ID:0/017> system.img.ext4
<ID:0/017> amss.bin
<ID:0/017> cache.img.ext4
<ID:0/017> mdm.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/017> Removed!!
my friend pleas help me what should i do
i flash t989 with other firmware but i have same problem (T989DTLLE4_T989DTLLE4_TLS & T989UVKL1_T989UVKL1_TMB)

What's the exact name of the file you tried to Odin flash?
NM
Sent from AOKP Goodness :-D

Were did you get these files? They don't familiar. Why don't try flash with CWM instead. Do you have CWM flashed?
Sent from AOKP Goodness :-D

if you're on T-mobile you should not try to ODIN the telus firmwares. you can CWM them though.

Odins Fails (Trying to Restore to Stock)

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T989UVMC6_T989TMB_T989UVMC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a telus/koodo s2x
I have samsung kies installed and I run odin as admin. I have the adb drivers installed as well...
What do you guys think I can do?

Looks as if you have the wrong firmware file. The file you are using is for the T989 T-Mobile USA variant. You need to flash the firmware for the T989D Telus variant.

akeem127 said:
Looks as if you have the wrong firmware file. The file you are using is for the T989 T-Mobile USA variant. You need to flash the firmware for the T989D Telus variant.
Click to expand...
Click to collapse
Oh my... I didn't think it would be as simple as that. I'll try to find the telus variant.

can't root or install TWRP with odin..

Every time I try to install CF-Auto root I get this. What I don't under stand is that I just used Odin to install I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 to return to stock ..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)

stealitall said:
Every time I try to install CF-Auto root I get this. What I don't under stand is that I just used Odin to install I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5 to return to stock ..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2att-d2uc-samsungsghi747.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try towelroot to root it. I used it on my tablet, and no PC required, everything is done right from the tablet itself...

Thanks a lot!! That seemed to work. Know if I found figure out how to install DE-SAMSUNGNIZER Script V5.2. I would be good lol.

stealitall said:
Thanks a lot!! That seemed to work. Know if I found figure out how to install DE-SAMSUNGNIZER Script V5.2. I would be good lol.
Click to expand...
Click to collapse
Not sure exactly what that particular script does, but just from the name alone, sounds like it might be a bloatware remover? Should be able to do that with just root privileges alone.....

[Q] unbrick galaxy note 2 2sph l900/ flashing stock firmware

hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated

If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...

I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app

my N7100 dont open stuck on Samsung Logo

Hi everyone,
My N7100 may be hard brick
i can open download mode, tried to install CMW or Touchwiz Recovery with Odin v3.04 but there is a FAIL.
Someone can help 2me?
I search on the internet this problem. There is written 'U have2 change eMMC module. '
Thnx4 replies.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.00.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Are you trying to flash the latest stock ROM from sammobile.com or updato.com?
Tried using Odin 3.07?
Tried different USB cables and USB ports?