my N7100 dont open stuck on Samsung Logo - Galaxy Note II Q&A, Help & Troubleshooting

Hi everyone,
My N7100 may be hard brick
i can open download mode, tried to install CMW or Touchwiz Recovery with Odin v3.04 but there is a FAIL.
Someone can help 2me?
I search on the internet this problem. There is written 'U have2 change eMMC module. '
Thnx4 replies.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.00.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> recovery.img
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Are you trying to flash the latest stock ROM from sammobile.com or updato.com?
Tried using Odin 3.07?
Tried different USB cables and USB ports?

Related

[Q]Odin not flashing

Hello all,
I'm trying to return my Bell s3 (i747M) and I'm trying to flash the bell the bell stock rom. I'm using odin but nothing is actually flashing. This is all I see
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> __Xmit Write fail
<ID:0/004> XmitData Fail..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried 2 different files on two different computers, any ideas?
Hi
Try to reinstall your drivers.
http://forum.xda-developers.com/showthread.php?t=1903516
Well I'm a bit of an idiot, new pc build and forgot about drivers. Also followed those connection issues and it worked just fine!

[Q] Galaxy Note sgh-i317 stuck on boot

Hi,
I am currently using some Samsung Galaxy Note II SGH-I317's and am trying to install a "dual persona image" onto the device. When doing this, the device has gone into screwy mode where i am unable to enter into recovery mode. The key sequence simply doesnt work. I am able to enter into ODIN (download) mode with no issues, but not into recovery.
When i try to install the base image back onto the device using ODIN i get a fail each time. Below is the output from ODIN:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N5110UEEMF2_N5110XAREMF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I would like to be able to return back to the factory default android, anyone with any bright ideas?
thanks in advance.
Ben

[Q] Odin fail when flashing back to stock

Hello, my Sprint Galaxy S3 was running CyanogenMod but I tried last night to flash back to stock and seem to have soft (I hope) bricked the phone. I'm using Odin 3.07 and a copy of the stock tar.md5 file. Now that I've bricked it I can only get into download mode, but my tar flash keeps failing. I've tried reinstalling the USB driver and have used all the different USB ports. I've switched cords and am pretty certain I'm using a good heavy duty cord. Here's where I get hung up. Any help would be appreciated.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Solved
onlyforandroid said:
Hello, my Sprint Galaxy S3 was running CyanogenMod but I tried last night to flash back to stock and seem to have soft (I hope) bricked the phone. I'm using Odin 3.07 and a copy of the stock tar.md5 file. Now that I've bricked it I can only get into download mode, but my tar flash keeps failing. I've tried reinstalling the USB driver and have used all the different USB ports. I've switched cords and am pretty certain I'm using a good heavy duty cord. Here's where I get hung up. Any help would be appreciated.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This ended up solving the problem:
http://forum.xda-developers.com/showthread.php?t=2755793
onlyforandroid said:
This ended up solving the problem:
http://forum.xda-developers.com/showthread.php?t=2755793
Click to expand...
Click to collapse
well of course it did you probably had ND8 before you had Cyanogenmod; if Odin any stock Rom below ND8 or NDC (if you had ND8 or NDC to begin with) you'll end up with a brick....

[Help] Stuck on Bootloop

Hi,
a friend of mine got is Galaxy note 2 stuck on a bootloop and we doesn't know what happened. The phone doesn't boot to recovery, only to download mode.
I'm trying to solve his problem but i'me having a lot of difficulties.
I installed all the things needed to do a factory reset:
Install drivers;
Intall ADB & Fastboot
download firmwere from samsung
download MJ5 bootloader
pit file to repartition
downloaded odin 3.07;3.09;3.10
but every time i use any of the odin versions to change the bootloader ou flah the PDA i get the same error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> tz.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can any one tell me what could my problem be?

[Q] unbrick galaxy note 2 2sph l900/ flashing stock firmware

hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated
If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...
I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app

Categories

Resources