hello my friends
i flash t989 with odin3 v1.83 but error when falsh
and this is my log
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T989UVKL1_HOME_SGH-T989user_CL799405_REV00.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.img
<ID:0/017> recovery.img
<ID:0/017> system.img.ext4
<ID:0/017> amss.bin
<ID:0/017> cache.img.ext4
<ID:0/017> mdm.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/017> Removed!!
my friend pleas help me what should i do
i flash t989 with other firmware but i have same problem (T989DTLLE4_T989DTLLE4_TLS & T989UVKL1_T989UVKL1_TMB)
What's the exact name of the file you tried to Odin flash?
NM
Sent from AOKP Goodness :-D
Were did you get these files? They don't familiar. Why don't try flash with CWM instead. Do you have CWM flashed?
Sent from AOKP Goodness :-D
if you're on T-mobile you should not try to ODIN the telus firmwares. you can CWM them though.
Related
Please help... I have problem with ODIN and my phone will not boot. Below are the details of the error in ODIN.
PIT file: t03g_0907.pit
PDA: N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ1_N7100OLBALJ1_N7100DXALIA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Come on did you try searching?
You are a victim of sds.
Look in the sds thread for more info.
Sent from my GT-N7100
Hello I can not flash the phone via ODIN. i8160
Tried many official firmware, single-file and multifile.
Tried to drop 2.3.6.
Phone does not boot on the logo (in recovery also comes)
Phone did not fall, just in the morning was not involved.
also tried this method http://forum.xda-developers.com/galaxy-ace/ace-2-help/galaxy-ace-2-recovery-mode-doesnt-t2788130
Please help.
Sorry for the English.
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> cache.img.md5
<ID:0/010> NAND Write Start!!
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi all while trying to downgrade from 4.4.2 to 4.3 on my note sm-p601 i have the following log in odin any clue to solve this.
Code:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P601XXUBMJ8_P601SERBMJ8_P601XXUBMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Added!!
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> SingleDownload.
<ID:0/018> sboot.bin
<ID:0/018> NAND Write Start!!
<ID:0/018> FAIL!
<ID:0/018>
<ID:0/018> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
klem__ said:
Hi all while trying to downgrade from 4.4.2 to 4.3 on my note sm-p601 i have the following log in odin any clue to solve this.
Code:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P601XXUBMJ8_P601SERBMJ8_P601XXUBMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/018> Added!!
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> SingleDownload.
<ID:0/018> sboot.bin
<ID:0/018> NAND Write Start!!
<ID:0/018> FAIL!
<ID:0/018>
<ID:0/018> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Same probleme here!!!
did you find a solution???
Not still running with kitkat
hi, today i was trying to downgrade from 4.4 to 4.3 but i think i messed up
anyways, im trying to flash "L900VPUBMK4_L900SPTBMK4_HOME.tar.md5" but i keep getting
on phone "sw rev.check fail. device:3, binary:2"
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006>
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
on newer odin i get
Code:
[SIZE="2"]<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/SIZE]
also i can access download mode and cwm recovery.
can any one help me??? plzzzz any help is apreciated
If you're on the latest NE2 firmware it is impossible to downgrade back to mk4 due to Knox boot loader, download the NE2 tar and flash it thru Odin... good luck! You might have to look for a partition fix posted by jlmancuso somewhere in a buried thread...
I was able to flash http://forum.xda-developers.com/showthread.php?t=2541395 using twrp and abd. After that i downloaded mobile odin and installed stock mk4
Sent from my SPH-L900 using XDA Free mobile app
I have a SM-N7505 running on 4.4.2 firmware which I downloaded from sammobile (N7505XXUCNH1_N7505OJVCNH2_XSG).. The phone was working fine but there was some issues with the recovery meaning I could not flash anything, since the recovery screen didn't show up.. I ignored it till now. Today I saw a notification saying supersu binary needs to be updated and clicked on it and the phone rebooted to go to recovery i presume and it is not working anymore.. i take the battery out and start it and all i see is the bootscreen.. I put my phone in download mode and connected to odin to reflash the firmware but it fails.. here is the log from odin..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7505XXUANB1_N7505OJVANE2_N7505XXUANAC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7505XXUCNH1_N7505OJVCNH2_N7505XXUCNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Somebody plese help me to fix my phone.. Please please please...
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
SAME ISSUE HERE PLS HELP