At first, I'm sorry for my bad English ?
I buy this phone for 4month
Before it got stuck at the logo I'm just playing pubgm and then it restarts by itself and boots to os for 5 seconds and it restarts again and boom! I got boot stuck
I try to boot to recovery mode but it does not work it keep restart
can't boot to fastboot mode too does it need to unlock first? Absolutely I can't now ?
I try to flash by sp flash tools but I got an error on scatter file (ERROR: STATUS_SCATTER_FILE_INVALID (0xC0030001). (I got rom with they are extracted on .ofp file)
And I try with Oppo download tools too but I don't have a password ?
Oppo service is far from where I live
Is there have any way to fix this? Thank
Related
I Have an LG G2 - Sprint phone the LS980 , been experimenting with it lately , however the last experiment went all wrong
I flashed the stock Rom of the Indian version KDZ file using the LG 2014 Flash tool, I was able to boot but Obviously there were a lot of issues using the OS . However on the next reboot I was stuck in a fastboot loop.
While in the fastboot loop , I was able to erase all partitions one by one and flash back these specific to the ZVC firmware http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware/zvc_partitions/
Now I only have Recovery mode and even though I have recovery mode , I cannot adb sideload a file as the system keeps saying it cannot detect a device !
I also tried the Download mode , I can enter the Download mode , but the LG tool will no longer flash it.
Any suggestions ?
Was able to get Download mode going with LG Flash tool , but I now get this error.
ERROR: laf Partition has Changed
Hi everyone,
yesterday I finally get my bootloader unlocked and I wanted to root my device, flash custom recovery and then flash CM13..¨
I found guide to root android 6.0 because I´m v20a, everything was fine, I booted to recovery via cmd command: fastboot boot recovery_image.img, but I forget to flash kernel and flashed only SuperSU and rebooted. After that I have a bootloop, adb not recognize my phone and LG Flash tool crashes with note: Required data not found. Contact your administrator..
I don´t know what I should do, please help me anybody.. :fingers-crossed:
PS: Sorry for my bad English I´m from Czech Republic..
Hello
Poweroff the phone.
Use key to start in Fastboot (Press Up and power button, release up button for 1-2 sec when LG logo appear and then push it again) and install the recover : fastboot flash recovery_image.img.
Start in recovery and flash CM13, you don't have to root the phone before doing this.
Regards.
same thing happened to me here
h811
flashed cm13
worked ok.. then flashed SUpersu via twrp
( and later found out that cm13 dont need supersu as it is already rooted )
Dumb A... of me!!
now i am in a boot loop cm13
i only see the cm13 boot animation.. and stuck there
phone wont take the :
Poweroff the phone.
Use key to start in Fastboot (Press Up and power button, release up button for 1-2 sec when LG logo appear and then push it again) and install the recover : fastboot flash recovery_image.img.
any clues... fastboot says wating for device...
i mean when i do the key combination
i still boot get in to the bootloop
fixed it
my phone did the same today, laptop wouldn't recognize phone after bootlooping.. I went to control panel, uninstalled the lg mobile usb drivers, then reinstalled the older drivers rom the internet .. lg up then immediately recognized my phone whilst connected in download mode I hit upgrade and flashed the kdz file.. and I now have a factory reset fully functional g4 hope this helps.
Hello every body
i cant find the magisk_patched 10.3.3 (Indian version), i searched every were but unfortunately i couldn't find it, i also try to extracted the boot.img from the update zip through payload dumper and then batch it on old nexus 6 device which is retired as workaround solution then try to flash the file via fastboot but it keeps looping at fastboot screen
please help guy i need the magisk_patched 10.3.3 (Indian version) file so my phone work back to normal
any help is highly appreciated
God bless you all
suhb20 said:
Hello every body
i cant find the magisk_patched 10.3.3 (Indian version), i searched every were but unfortunately i couldn't find it, i also try to extracted the boot.img from the update zip through payload dumper and then batch it on old nexus 6 device which is retired as workaround solution then try to flash the file via fastboot but it keeps looping at fastboot screen
please help guy i need the magisk_patched 10.3.3 (Indian version) file so my phone work back to normal
any help is highly appreciated
God bless you all
Click to expand...
Click to collapse
from Next time do this,
Don't ever flash some random Boot image from Internet, just boot it -
In short -
Get a recently magisk patched boot image (either recent beta or recent stable build patched boot image)
Connect your phone to PC
now reboot to bootloader and run this command,
fastboot boot magisk_patched.img
Don't flash boot image
Install Magisk manager and from it select Install > Direct install
Reboot
But since you have already flashed the wrong one. Here , flash the magisk_patched boot img of 10.3.3 Indian Build -
https://androidfilehost.com/?fid=8889791610682876433
Note : I am not responsible if anything goes wrong, Flash it at your own risk.
Aswin08 said:
from Next time do this,
Don't ever flash some random Boot image from Internet, just boot it -
In short -
Get a recently magisk patched boot image (either recent beta or recent stable build patched boot image)
Connect your phone to PC
now reboot to bootloader and run this command,
fastboot boot magisk_patched.img
Don't flash boot image
Install Magisk manager and from it select Install > Direct install
Reboot
But since you have already flashed the wrong one. Here , flash the magisk_patched boot img of 10.3.3 Indian Build -
https://androidfilehost.com/?fid=8889791610682876433
Note : I am not responsible if anything goes wrong, Flash it at your own risk.
Click to expand...
Click to collapse
Thank you very much for your reply, allow me to explain what happened before i proceed to your solution
- After updating from 10.3.2 to 10.3.3 i was able to flash magisk_patched file but the problem is no WIFI & SIM
- after many attempts by flashing magisk_patched the device keeps looping to either fastboot mode or unlocked boot screen.
- I extracted the boot.img file from original full update file by using using Payload Dumper then i moved that boot.img file to an old NEXUS phone which is rooted so i can patched it by using magisk which i then flash it back to my OnePlus 7T but it keeps looping to fastboot mode
- By some how i was able to work after downloading from (https://drive.google.com/drive/folders/1MCfCPci7F7FGl5ZHVTNRKVq9j8RBCUih)
- when i reached home i wanted to update magisk (i select to inactive OTA slot) everything is missed up , but unfortunately the device keeps looping even though i used this file (https://forum.xda-developers.com/oneplus-7t/how-to/oos-10-0-11-magisk-patched-boot-img-t4106435)
- Suddenly the device shows "Qualcomm crash dump mode" which is a bad sign but after pressing Power + Vol UP + Vol DOWN i was able to get back the fastboot screen (which i think its a good sign)
- i flashed magisk_patched.img 10.0.11 but the device keeps looping to unlocked boot screen.
How can i find the correct magisk_patched.img for 10.3.3 ? i am using Titanium Back, is there a way that i can connect the phone to my PC and copy all my files before i flash a new Stock OS if this is the last solution !!
Question : If i use another solution by using "TOOL ALL IN ONE" then flash factory image ? will this fix the problem and keep my data
Note : i am very optimistic that my data is safe but its an issue of booting...... I hope so
Wating for your reply and thank you very much
suhb20 said:
Thank you very much for your reply, allow me to explain what happened before i proceed to your solution
- After updating from 10.3.2 to 10.3.3 i was able to flash magisk_patched file but the problem is no WIFI & SIM
- after many attempts by flashing magisk_patched the device keeps looping to either fastboot mode or unlocked boot screen.
- I extracted the boot.img file from original full update file by using using Payload Dumper then i moved that boot.img file to an old NEXUS phone which is rooted so i can patched it by using magisk which i then flash it back to my OnePlus 7T but it keeps looping to fastboot mode
- By some how i was able to work after downloading from (https://drive.google.com/drive/folders/1MCfCPci7F7FGl5ZHVTNRKVq9j8RBCUih)
- when i reached home i wanted to update magisk (i select to inactive OTA slot) everything is missed up , but unfortunately the device keeps looping even though i used this file (https://forum.xda-developers.com/oneplus-7t/how-to/oos-10-0-11-magisk-patched-boot-img-t4106435)
- Suddenly the device shows "Qualcomm crash dump mode" which is a bad sign but after pressing Power + Vol UP + Vol DOWN i was able to get back the fastboot screen (which i think its a good sign)
- i flashed magisk_patched.img 10.0.11 but the device keeps looping to unlocked boot screen.
How can i find the correct magisk_patched.img for 10.3.3 ? i am using Titanium Back, is there a way that i can connect the phone to my PC and copy all my files before i flash a new Stock OS if this is the last solution !!
Question : If i use another solution by using "TOOL ALL IN ONE" then flash factory image ? will this fix the problem and keep my data
Note : i am very optimistic that my data is safe but its an issue of booting...... I hope so
Wating for your reply and thank you very much
Click to expand...
Click to collapse
Did you try flashing the 10.3.3 boot image i have provided above?
And btw you can't get out the data in any other way without booting because of encryption.
Aswin08 said:
Did you try flashing the 10.3.3 boot image i have provided above?
And btw you can't get out the data in any other way without booting because of encryption.
Click to expand...
Click to collapse
Hello,
You know what today afternoon i was just getting the USB cable so i can connect my OnePlus 7T to my laptop when i just picked up my phone i noticed that its not on the Unlocked boot loader screen" its was just normal as before (every is was working fine...every thing) i was really astonished what happened when i checked the OS its 10.3.3 and every thing is working fine even root is working, what i need to do is update magisk (direct install) as you told me
I really don't know what happened but i am very happy for that
i really appreciate your prompt help and assistance even thought i didn't do any thing.
one question please ..what is the difference between :
- fastboot boot magisk_patched.img
- fastboot flash boot magisk_patched.img
Best regards and wishes
suhb20 said:
Hello,
You know what today afternoon i was just getting the USB cable so i can connect my OnePlus 7T to my laptop when i just picked up my phone i noticed that its not on the Unlocked boot loader screen" its was just normal as before (every is was working fine...every thing) i was really astonished what happened when i checked the OS its 10.3.3 and every thing is working fine even root is working, what i need to do is update magisk (direct install) as you told me
I really don't know what happened but i am very happy for that
i really appreciate your prompt help and assistance even thought i didn't do any thing.
one question please ..what is the difference between :
- fastboot boot magisk_patched.img
- fastboot flash boot magisk_patched.img
Best regards and wishes
Click to expand...
Click to collapse
boot command just boots that img temporarily, when you restart the phone 2nd time, your original img will be retained . If anything goes wrong you won't get into trouble.
flash is.. usual permanently flashing the boot image into your system.
please help me to identify the problem
my phone lenovo p2 (bootloader is unlocked , android 10 was installed)
I put my phone on non original charger and at morning i found phone Stuck on boot logo,can boot to fastboot, can't boot to recovery or ROM,
when put the charger it open on logo
when try to go to recovery by vol +,- it power off
I leave it all night it still on logo
I can :
enter fast boot
change boot logo
install any software by fastboot
I tried :
Every software that can be install by fastboot s048,s062,s251,s232,s244
Lenovo P2 UnBrick package by OneTeam EypCnn
stock recovery
TWRP recovery
I attach Log file for Getvar and installation log for s048
it is software problem ?? I read all article on forum some say EMMC dead and other say battery is dead
any help to point out problem ?
i dont know if it helps but can you try ''fastboot boot recovery [recovery/twrp].img'' on fastboot
have you find a solution ? i have the same problem .
DrGhost001 said:
please help me to identify the problem
my phone lenovo p2 (bootloader is unlocked , android 10 was installed)
I put my phone on non original charger and at morning i found phone Stuck on boot logo,can boot to fastboot, can't boot to recovery or ROM,
when put the charger it open on logo
when try to go to recovery by vol +,- it power off
I leave it all night it still on logo
I can :
enter fast boot
change boot logo
install any software by fastboot
I tried :
Every software that can be install by fastboot s048,s062,s251,s232,s244
Lenovo P2 UnBrick package by OneTeam EypCnn
stock recovery
TWRP recovery
I attach Log file for Getvar and installation log for s048
it is software problem ?? I read all article on forum some say EMMC dead and other say battery is dead
any help to point out problem ?
Click to expand...
Click to collapse
have you find a solution ? i have the same problem .
I had the same problem a few times lately.
The best solution is to boot in bootloader then under windows enter :
fastboot boot twrp-3.5.0_9-0-kuntao.img
(or any twrp you downloaded) it will boot the phone in recovery and you can wipe and sideload a rom.
Hello i need help please.
I was trying to flash twrp using adb and fastboot when i accidentally flash aboot.img into system and now it wont boot into the system and it stuck on lg logo and it wont let me boot into recovery mode. When i do the Vol. down + power it directs me to factory data reset and I tried resetting it and gave me an error "Your device is corrupt. It can't be trusted and may not work properly."
Does anybody know how to fix this issue please?.