Related
My Honor 7x (BND-L21) is totally bricked for the moment. I think there is Nougat and Oreo partitions at the same time because of Huawei Multi-Tool. Now I can't boot into recovery/eRecovery and the device stucks in the splash screen (bootloader unlocked). I think I have to rewrite all the partitions but I don't know how to do it... If anybody has a solution it will be greatly appreciated, I tried for 1 week!
If your device has a locked bootloader or frp follow these steps
First of charge your device for 1 hour in whatever mode it is..
https://www.androidfilehost.com/?fid=11050483647474828964
Then download the service rom from the above link
Extract the contents of the downloaded file. Copy the dload folder from the extracted files to a sdcard.. (Directly to it not on any directory)
Insert the sd card..
Press all the buttons until the emui logo comes.
After the flashing reaches 100 percent.. Reboot the device unlock the oem in developer option..
Step-2 (Computer)
Download adb drivers and fastboot and install them.
Download complete ota package for your device (make sure you have the correct build number because service rom has a different build number ) (download size will be above 2gb)
Extract all downloaded zip files. Then using huawei firmware extractor extract all contents of the update. app files.. (one update. App file in each zip files)
Copy
kernel. Img
Ramdisk. Img
System. Img
Cust. Img
Version. Img
Vendor. Img
And version. Img to the folder having adb files. And version and vendor files to sd card
//Make sure that the complete ota package you downloaded matches the os before the software brick(noughat or oreo) //
Open the adb folder and do shift plus right click to open command window there and connect your device in fastboot mode to pc
Use the below commands one by one each after completion
Fastboot devices(show your device if its connected)
Fastboot oem unlock (code obtained from huawei unlock page)
#factory rest occur
After tha enter fastboot mode again
Step-3
Fastboot flash ramdisk ramdisk.img
Fastboot flash recovery_ramdisk recovery_ramdisk. Img
Fastboot flash system system. Img
Fastboot flash cust cust.img
Flash twrp using
Fastboot flash recovery_ramdisk twrp. img
Boot your device to recovery mode.( Volume up plus power)
Flash version. Img to version partition and vendor. Img to vendor partition
If you want stock recovery back
Boot into fastboot mode
Enter the command
fastboot flash recovery_ramdisk recovery_ramdisk. Img
And do a reboot
Relock bootloader upto your wish..
Better keep oem unlocked in developer options
If you have both unlocked bootloader and frp follow from step 2
I heard huawei discontinued the unlock page
In that case use dc unlocker to find the code
It will cost some money
All credits to @mrmazak
Thank you I will try this but the dload method didn't worked when I tried 4 days ago...
I can't go into dload update mode (when I hold all the physical buttons the phone restarts and this appears (picture 1) and got stuck on this screen).
Also I don't know why but the phone doesn't charge, when I unplug it after 1h of charge, it shows the critical battery screen (picture 2) and it goes off...
Any help is reaaly appreciated!
Any other ideas?
gabrce said:
Any other ideas?
Click to expand...
Click to collapse
Though situation, if not charging. Bit to verify, try different cable and charging brick to make sure.
I changed twice the cable and nothing change...
Is there a method to factory reset the device in fastboot mode?
Maybe I should try HWOTA8?
gabrce said:
Maybe I should try HWOTA8?
Click to expand...
Click to collapse
Will need to de able to boot twrp for hwota to work.
So what should I do? Is there a method to flash twrp without fail? Because I can't boot into it...
gabrce said:
So what should I do? Is there a method to flash twrp without fail? Because I can't boot into it...
Click to expand...
Click to collapse
If battery is not charging, then it will not take a flash.
You can maybe try remove back cover and unplug battery, then reconnect see if it will take a charge.
As for your question about resetting with fastboot. You can wipe data, and maybe format system also. But I don't think that will help you.
My friend is asking help. His situation is similar. The phone is honor 6x.
My opinion is that something wrong with boot partition. you can ask some body extract the boot image from another phone. Then run "fastboot flash boot_ramdisk boot.img".
Hope it helps
Thank you for your answer.
This command didn’t work.
My phone got stuck for one month now...I’m desesperate...
gabrce said:
Thank you for your answer.
This command didn’t work.
My phone got stuck for one month now...I’m desesperate...
Click to expand...
Click to collapse
I try to help again.
Describe problem please
As I recall it is as follows
** Phone working,
** Attempts some backup or restore using multi-tool
** This made phone no longer boot
**Possible that nougat images flashes to Oreo partition tanle (or visa- versa)
**Now no recovery or erecovery will even boot.
**Also phone shuts off with low battery as soon as cable unplugged.
If this is the case, I see no way forward. Because the battery needs to hold something in order for flashing to complete
I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead
Dude, you just should flashing original/stock boot.img and recovery.img. And your phone already fixed.
Jus flash vbmeta and than flash twrp again . It will work fine and you won't get erro
Flash vbmeta
where did you got the file?
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
orl4nd said:
where did you got the file?
Click to expand...
Click to collapse
I found one in the pixel rom thread, it worked fine for me when i had this issue flashing candy rom
Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
You have to flash the boot.img via adb to boot into Fastboot or Recovery.
Stuck at same problem.
I am also facing same problem. I can't open fastboot and the phone reboots to stock recovery after some time. Please help.
same problem for me
Ragzone said:
I have the same problem. Also cant flash vbmeta because the phone cant go into fastboot/recovery mode. It seems the only option is to flash it in edl mode and haven't found a tool that can do that
Click to expand...
Click to collapse
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.
reza14 said:
i have the same problem exactly. no access to adb commands nor recovery. please let me know if you could find a solution.
Click to expand...
Click to collapse
I will keep trying the different flashing tools. Also let me know if you are succesful.
RMX1901CH unbirick
RMX1901CH
I was in the same state but unbirick.
When the power is off Press the volume minus and the power simultaneously.
If you are in fastboot mode
1.adb flashing command // fastboot flash recovery twrp-3.3.1-24- RMX1901-mauronofrio.img
2. after starting TWRP - connected with otg usb memory (StockROM.ozip)
3. USBOTG to mount
4.wipe dalvik / ARTCache & cache & system & data
* 5. INSTALL StockROM
* RMX1901_11_OTA_0190_all_fSt4F56aQlqf.ozip (China) A19
I haven't tried with older versions
The international version will show an inappropriate error, and it may be possible with the same language model
* 6. reboot
Japanese who cannot speak English
I did this way
Is this problem Solve? i face the same problem. what can i do?
Hatzey said:
I unlocked bootloader of my phone, flashed TWRP then installed new ROM and then tried to boot bt the only thing I get on my screen is "the current image(boot/recovery) have been destroyed and cannot boot"
This screen repeats and I cn't do anything, not able to find any good tool or something to flash stock rom again...Please help am alrady dead
Click to expand...
Click to collapse
Please help me.
same issue , can't do anything
the only way I found is , to know this user and pass in this tool so that I could test the firmware and post this here
Такая же проблема, помогите!!!
Long press volume down and power button , the phone will boot into fastboot mode. Flash vbmeta with disable verity command . It worked for me. No need do anything else.
volume down and power button for 10 sec
then flash stock recovery
then wipe data from stock rocovery
then back to bootloader and flash twrp recovery
then transfer stock rom zip on device
install it
done
Man i have the same problem, did you find any solution?
I already downloaded the qualcomm flash image loader, the pc detects the phone only when i press volume + and volume - and connect it, so i know i can do something, im gonna try with the EDL mode, any advance i'll let you know
how to do Flash vbmeta with disable verity command ???
Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
Click to expand...
Click to collapse
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.
fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.
Click to expand...
Click to collapse
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....
idog8818 said:
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....
Click to expand...
Click to collapse
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!
Same
Hello,
I think I did the same error, flashing a wrong boot.img...
I tell you if I manage to do something.
hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72
danyv77 said:
hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72
Click to expand...
Click to collapse
This only helps when boot image is not damaged.
Duchan_xda said:
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!
Click to expand...
Click to collapse
I'm with you. The boot image has error and when MTK realize it has something wrong it will NOT enter into fastboot. The only way to fix this is too use SP Flash Tool for deep flash. Mi store uses this way as well to fix the issue.
Try this:
https://c.mi.com/thread-2173190-1-0.html
ppthom said:
Try this:
https://c.mi.com/thread-2173190-1-0.html
Click to expand...
Click to collapse
This does NOT work. Please don't waste time on it.
:good:Thanks for clarifying this. Back to square one ...
idog8818 said:
Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.
Click to expand...
Click to collapse
Are you recover your phone? I'm still waiting one year...
Duchan_xda said:
Are you recover your phone? I'm still waiting one year...
Click to expand...
Click to collapse
I didn`t find any background on your issue, just something like you actually have a device with white led light blinking.
I read this thread before (yes, some weeks ago) this happened to me yesterday https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-unlock-note-8-pro-authorised-t4168805 the short story is that I were trying to return to Miui 12 after of using some custom ROMs and something in the flashing process failed I mean it was an incomplete flashing and I assumed that most probably just the bootloader partition was damaged. The whole important fact in this situation is that you have yet available fastboot mode but like the splash partition with its image was gone I couldn `t see it and I were anyway in fastboot mode so I could flash the proper files to "unbrik" it. (my device is unlocked)
What you should try is connect it with PC while you`re pressing the volume down, enter to adb/fastboot environment and type fastboot commands to see if device is recogniced, you don`t have to hear constant reboot sounds or in this case press the power button simulating that you are powering off device.
Hello lads,
I have been having issues with my OnePlus Nord N100.
On my fault, I wanted to root with magisk using fastboot. Unfortunately, I had flashed boot a magisk.img which was not compatible with OnePlus Nord N100.
The phone is currently stuck in Fastboot Mode. I have tried several times to flash boot it back to its original boot.img, unfortunately it does not work.
Every time I try to go to Recovery Mode, it leads me right back to the Fastboot main menu. I can turn off the phone and reboot it with no issues.
I believe I have soft bricked it, and I need help recovering it back to it's original state, or better yet root it in a riskless way.
Here is a list of commands and techniques I have tried so far:
- Fastboot -w
- Fastboot erase cache
- Fastboot erase boot
- Fastboot erase boot_a
- Fastboot erase boot_b
- Fastboot boot boot.img (Ends up with a failure)
- Fastboot flash boot boot.img (Command is successful, but no changes for boot)
- Tried all combinations keys to go to Recovery Mode (Power button + Volume Down Button + Volume Up Button)
Thank you for helping me out if you can.
Windwell said:
Hello lads,
I have been having issues with my OnePlus Nord N100.
On my fault, I wanted to root with magisk using fastboot. Unfortunately, I had flashed boot a magisk.img which was not compatible with OnePlus Nord N100.
The phone is currently stuck in Fastboot Mode. I have tried several times to flash boot it back to its original boot.img, unfortunately it does not work.
Every time I try to go to Recovery Mode, it leads me right back to the Fastboot main menu. I can turn off the phone and reboot it with no issues.
I believe I have soft bricked it, and I need help recovering it back to it's original state, or better yet root it in a riskless way.
Here is a list of commands and techniques I have tried so far:
- Fastboot -w
- Fastboot erase cache
- Fastboot erase boot
- Fastboot erase boot_a
- Fastboot erase boot_b
- Fastboot boot boot.img (Ends up with a failure)
- Fastboot flash boot boot.img (Command is successful, but no changes for boot)
- Tried all combinations keys to go to Recovery Mode (Power button + Volume Down Button + Volume Up Button)
Thank you for helping me out if you can.
Click to expand...
Click to collapse
Tried changing between active slot ?
Also flashed the unpatched boot.img to both slots a/b?
fastboot --set-active=a
or:
fastboot --set-active=b
AJHutchinson said:
Tried changing between active slot ?
Also flashed the unpatched boot.img to both slots a/b?
fastboot --set-active=a
or:
fastboot --set-active=b
Click to expand...
Click to collapse
Hey mate,
Thanks for responding. Sorry for the late reply.
From what you had suggested, I did "fastboot --set-active=a" , "fastboot flash boot boot.img", and "fastboot reboot" (with the stock unpatched boot.img) the commands were successful once again, but there were no effective changes.
Afterwards, I did "fastboot --setactive-b", "fastboot flash boot boot.img", and "fastboot reboot" the commands were successful once more, and this time, I was finally able to go into recovery mode. On the other hand, in recovery mode I wiped the cache and erased everything, but unfortuantely I still could not boot into Android, even though I tried to flash boot the image once more.
Thank you for these commands, as I was at least able to recover recovery mode.
Any other suggestions maybe?
Hello,
Use this tool and it will fix it, I had the same problem. Just download the software and flash it in Qualcomm EDL mode.
MSMDownload image needed
Hello guys, I managed to flash the wrong image to OnePlus NORD N100 BE2013, I overlooked for the first time what I'm doing and messed it up Now it's in Qualcomm EDL mode and I need and image to flash it to bring it back do life, anyone I can...
forum.xda-developers.com
I alsp posted boot.img which is compatible you can flash it. Link is in the comments.
Thanks
Boot.img from nord n100 in this thread, I exctracted and rooted it myself.
I WHANT RECOVERY Boot.img FOR ROOT MY ONEPLUS NORD N100
I unlock bootloader and i whant to root with magisk my phone, i need boot.img for rocovery..I try anather boot.img from One plus nord, etc, i sucessfull flash this recovery's with command in windows but is no go in recovery, stay in bootloop..Can...
forum.xda-developers.com
Hello,
I used the tool MSMDownload but unfortunately I was unable at all to boot into Qualcomm Edl mode, even though I have installed correctly all the drivers for Windows Qualcomm, and OnePlus USB drivers, and used the correct method (Volume Button UP and Down at the same time whilst connecting the phone via USB). I tried flash booting with the boot.img you gave me, but still no changes. I am still stuck in Fastboot.
If you had encountered the same issue back then, can you tell me the excat procedure you did please?
Thank you so much.
I was in the exact same situation after flashing boot.img from one plus nord by mistake.
It got so bad it was totally bricked and just got into EDL mode by holding down the up and down volume buttons and holding power on. Even the screen didn't work.
Once that started, MSMDownload tool from the N100 thread worked fine, you downloaded the proper package right?
Which model does it say on the back? This was BE2013.
I think solution for you is a fastboot image, I extracted the payload.bin to .img files and brought it back to life with it and rooted it with magisk.
The boot.img I uploaded here was from Oxygen OS 10.5.5.
If you have fastboot you should 100% be able to boot into EDL mode, just hold down the up and down volume buttons for long time and then the power button
Thanks
AJHutchinson said:
Tried changing between active slot ?
Also flashed the unpatched boot.img to both slots a/b?
fastboot --set-active=a
or:
fastboot --set-active=b
Click to expand...
Click to collapse
oh
thts ok man
بلوک سبک
I will try to make a fastboot image for OnePlus NORD N100 BE2013 with 10.5.5 and upload it to mega, I'll send you the link. If you are in fastboot mode you will be able to flash it I believe, let me have a look.
Fast boot image is ready for Oxygen 10.5.5 Nord N100 EUROPE, I am uploading it to MEGA.
motovnet said:
I was in the exact same situation after flashing boot.img from one plus nord by mistake.
It got so bad it was totally bricked and just got into EDL mode by holding down the up and down volume buttons and holding power on. Even the screen didn't work.
Once that started, MSMDownload tool from the N100 thread worked fine, you downloaded the proper package right?
Which model does it say on the back? This was BE2013.
I think solution for you is a fastboot image, I extracted the payload.bin to .img files and brought it back to life with it and rooted it with magisk.
The boot.img I uploaded here was from Oxygen OS 10.5.5.
If you have fastboot you should 100% be able to boot into EDL mode, just hold down the up and down volume buttons for long time and then the power button
Thanks
Click to expand...
Click to collapse
For some reason Qualcomm Mode Edl does not launch whatsoever.
motovnet said:
Fast boot image is ready for Oxygen 10.5.5 Nord N100 EUROPE, I am uploading it to MEGA.
Click to expand...
Click to collapse
Thank you that's very kind of you. I think the only way to fix it by flash boot.img, but I have doubts because it does not work.
The only commands I am doing are "fastboot devices", "fastboot flash boot boot.img"
With the fastboot image you will be able to flash everything, it contains not only boot.img but system and etc. I managed to boot mine and bring it back to life by reflashing everyhing.
So the only thing I need to do is "fastboot flash boot ''.img" right?
Where can I get all the nesscary files?
And how did you manage to root it?
The fastboot image flashes all partitions, not just boot with stock Oxygen OS 10.5.5
What you need to do is run flash-all.bat from the archive and it will flash the entire os not just boot.img.
If you can't get to EDL mode, fastboot flash is the only solution. What model does it say in the back? This one was EUROPE BE2013.
Is your EU or Global device?
Archive is uploading still.
Thanks
The model is the correct one. BE2013, although it does not say EU or anything.
In the archive, I would just need to run flash-all.bat which flash boots all the nesscary images correct?
Thank you once agian.
2.55 GB file on MEGA
mega.nz
This is a fastboot image for OnePlus NORD N100 EU BE2013 device.
Extract it to a new folder, it contains fastboot in it.
Right click flash-all.bat and run as admin.
You can open the flash-all.bat file with notepad to check yourself there is nothing strange in it. I used a bat file from the forum that was fastboot image for OnePlus NORD and changed it to use the .img files for OnePlus NORD N100.
Contains Oxygen 10.5.5, once you bring it back to life (IF YOU HAVE THIS MODEL), you can use magisk to patch the boot.img and flash it via fastboot.
This is how I rooted it and it worked properly.
Please use it with caution and ensure your model matches! I can not guarantee it will work on other devices.
If you can't go to EDL mode, this is your way to go, but I don't know if flashing GLOBAL version will work.
Thanks
Windwell said:
The model is the correct one. BE2013, although it does not say EU or anything.
In the archive, I would just need to run flash-all.bat which flash boots all the nesscary images correct?
Thank you once agian.
Click to expand...
Click to collapse
I would guess BE2013 is the EU one, as this worked on mine.
motovnet said:
I would guess BE2013 is the EU one, as this worked on mine.
Click to expand...
Click to collapse
Okay thank you for helping me. I will try this later and keep you in touch.
Windwell said:
Okay thank you for helping me. I will try this later and keep you in touch.
Click to expand...
Click to collapse
Thanks, let me know if it works for you. If you're unable to flash it via fastboot, only EDL will help.
I've been trying to root my Note 9T. The bootloader has been unlocked, and I've followed a guide from here: https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/
I'm now stuck in a bootloop.
Anyone been successful?
I additionally tried using a different version of TWRP, which wiped the "misc" partition. Can anyone provide an image dump of the misc partition so I can flash it back on? I can't find a copy of misc in the stock firmware file.
UPDATE 1:
I put the full stock image back on and am back to having a working unrooted phone, so I don't need the misc image. Would really like to get this thing rooted though.
I've installed the Magisk APK, patched the boot image, and flashed it. But this also results in a boot loop. If I flash the stock image back it works again. Any ideas what's going on here?
UPDATE 2:
I got it working! The key was to flash the stock vbmeta.img with fastboot functions to disable it.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Hiya. I've tried that and managed to get to the twrp page. However, when I go to install magisk via twrp, it just reboots into a bootloop. Any ideas?
Update: This seems to have worked.
[SOLVED] Phone gets stuck in bootloop if I try to install Magisk ZIP!
From the forum I followed these step to install magisk: - Patched my boot.img of my current rom using Magisk Manager and flashed via fastboot - After rebooting from fastboot it got stuck in recovery so had to wipe all data and it booted finally...
forum.xda-developers.com
Did you manage to get Magisk working after the reinstall of stock firmware, or you've just resolved the bootloop?
dsclee1 said:
I've been trying to root my Note 9T. The bootloader has been unlocked, and I've followed a guide from here: https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/
I'm now stuck in a bootloop.
Anyone been successful?
I additionally tried using a different version of TWRP, which wiped the "misc" partition. Can anyone provide an image dump of the misc partition so I can flash it back on? I can't find a copy of misc in the stock firmware file.
UPDATE 1:
I put the full stock image back on and am back to having a working unrooted phone, so I don't need the misc image. Would really like to get this thing rooted though.
I've installed the Magisk APK, patched the boot image, and flashed it. But this also results in a boot loop. If I flash the stock image back it works again. Any ideas what's going on here?
UPDATE 2:
I got it working! The key was to flash the stock vbmeta.img with fastboot functions to disable it.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
I'm interesting in at least rooting and if possible install TWRP .
Can you post i complete procedure to root the note 9 T ?
Thanks
I can have a go. But I'm not 100% sure what exact steps I took that got it working, as I flashed and re-flashed several times. Give this a try and let me know if it works or not?
WARNING: EXPECT TO LOSE ALL THE DATA ON YOUR PHONE!
Step 1
Obviously you need to unlock the bootloader first: https://en.miui.com/unlock/
If you haven't done this already, after your application it's likely you might have to wait 7 days before Xiaomi actually let you unlock.
Unlocking wipes your data.
Step 2
Start the phone normally. Copy the latest magisk apk (https://github.com/topjohnwu/Magisk/releases) over to the phone and install it.
Step 3
Find the correct original ROM for your device (https://xiaomifirmwareupdater.com/miui/cannong/). You'll need the full image. From the ROM extract the boot.img and vbmeta.img. Copy the boot.img over to your phone.
Step 4
In magisk choose the option to install and select "Select and Patch a File" (should be the only option anyway). Select the boot.img you copied over. This will produce a new file called something like "magisk_patched-22100_XXXXX.img". Copy this file off your phone and onto your computer.
Step 5
Boot your phone to fastboot mode (you should already know how to do this, as you would have had to have done it to unlock your phone in the first place - Hold down Volume Down and the Power button at the same time).
Step 6
Run the following commands (obviously replace the boot image with the correct magisk image, and use the vbmeta.img you took from the ROM):
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched-22100_XXXXX.img
Hopefully this will work. But I can't be 100% sure, as the disabling of "verity" could mean that your encrypted user data now can't be read (if you've only just unlocked the bootloader then you're not going to have any data anyway, so not too much of an issue). If this is the case it's likely you'll now need to factory reset the phone. Hold down Volume Up and Power on start to reach the stock recovery menu, and there's a selection for factory reset. You can also install TWRP at this point, and could then use it's factory reset function instead. I downloaded this version of TWRP: https://www.mediafire.com/file/ou8553psro9yyt2/3.4.2_redmi_note_9_5G.rar/file, which came from the other rooting guide (https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/ - which didn't work). Just flash that version of TWRP to the recovery partition (fastboot flash recovery recovery.img), and ignore all the steps given in the guide it came from.
Let me know how you get on.
sorry for the answer delay.
Adding my 2 cents about unlocking the bootlader .
In order to do it .
FIRST - do not try it from a virtual PC . It does not work (at least it did not work for me)
SECOND , before to run the xiaomi batch_unlock bootlader , don't forget to update google usb drivers
I hard some hard time to just connect the unlocker to my phone . Now i have to wait 167 hours to complete the process .
dsclee1 said:
I've been trying to root my Note 9T. The bootloader has been unlocked, and I've followed a guide from here: https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/
I'm now stuck in a bootloop.
Anyone been successful?
I additionally tried using a different version of TWRP, which wiped the "misc" partition. Can anyone provide an image dump of the misc partition so I can flash it back on? I can't find a copy of misc in the stock firmware file.
UPDATE 1:
I put the full stock image back on and am back to having a working unrooted phone, so I don't need the misc image. Would really like to get this thing rooted though.
I've installed the Magisk APK, patched the boot image, and flashed it. But this also results in a boot loop. If I flash the stock image back it works again. Any ideas what's going on here?
UPDATE 2:
I got it working! The key was to flash the stock vbmeta.img with fastboot functions to disable it.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
ive been trying for the last 4 hours to flash twrp on my redmi note 9T 5g global..can you please explain to me how you got it to work. i flashed the recovery.img and vbmeta.img file that i got from the unofficialtwrp.com download, when i flash boot recovery.img, it just reboots my phone into normal...and i missing something? My device is on Miui 12.0.8.0 andriod 10. should i be on the new update 12.5 andriod 11 for it to work. Please help.
dsclee1 said:
I can have a go. But I'm not 100% sure what exact steps I took that got it working, as I flashed and re-flashed several times. Give this a try and let me know if it works or not?
WARNING: EXPECT TO LOSE ALL THE DATA ON YOUR PHONE!
Step 1
Obviously you need to unlock the bootloader first: https://en.miui.com/unlock/
If you haven't done this already, after your application it's likely you might have to wait 7 days before Xiaomi actually let you unlock.
Unlocking wipes your data.
Step 2
Start the phone normally. Copy the latest magisk apk (https://github.com/topjohnwu/Magisk/releases) over to the phone and install it.
Step 3
Find the correct original ROM for your device (https://xiaomifirmwareupdater.com/miui/cannong/). You'll need the full image. From the ROM extract the boot.img and vbmeta.img. Copy the boot.img over to your phone.
Step 4
In magisk choose the option to install and select "Select and Patch a File" (should be the only option anyway). Select the boot.img you copied over. This will produce a new file called something like "magisk_patched-22100_XXXXX.img". Copy this file off your phone and onto your computer.
Step 5
Boot your phone to fastboot mode (you should already know how to do this, as you would have had to have done it to unlock your phone in the first place - Hold down Volume Down and the Power button at the same time).
Step 6
Run the following commands (obviously replace the boot image with the correct magisk image, and use the vbmeta.img you took from the ROM):
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched-22100_XXXXX.img
Hopefully this will work. But I can't be 100% sure, as the disabling of "verity" could mean that your encrypted user data now can't be read (if you've only just unlocked the bootloader then you're not going to have any data anyway, so not too much of an issue). If this is the case it's likely you'll now need to factory reset the phone. Hold down Volume Up and Power on start to reach the stock recovery menu, and there's a selection for factory reset. You can also install TWRP at this point, and could then use it's factory reset function instead. I downloaded this version of TWRP: https://www.mediafire.com/file/ou8553psro9yyt2/3.4.2_redmi_note_9_5G.rar/file, which came from the other rooting guide (https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/ - which didn't work). Just flash that version of TWRP to the recovery partition (fastboot flash recovery recovery.img), and ignore all the steps given in the guide it came from.
Let me know how you get on.
Click to expand...
Click to collapse
should I be on the latest version of Miui...12.5 android 11? for me to be able to install twrp. i downgraded back to Miui 12.0.8.0 android 10 as i didnt like my data folder been blocked in android folder. My device is global cannong redmi 9T 5g with diminsity 800u soc, can you please help if you can. thanks in advance
Android 10 is fine. You need to fastboot flash recovery recovery.img
To boot into it you need to turn the phone off, then hold vol up and power until you feel a buzz, then let go.
I have the same Problem as HighEndGamer:
if I enter 'fastboot flash recovery recovery.img', it sayes that everything worked OK in just a few seconds. But nothing realy happend!
If I enter 'fastboot boot recovery.img', phone boot just as normal.
If I enter 'fastboot oem device-info', it sayes "FAILED (remote: unknown command)'.
If I enter 'fastboot oem lock', it works and I have to start from the beginning..
I have MIUI Global 12.0.2.0{QJEEUMX)
chmick said:
sorry for the answer delay.
Adding my 2 cents about unlocking the bootlader .
In order to do it .
FIRST - do not try it from a virtual PC . It does not work (at least it did not work for me)
SECOND , before to run the xiaomi batch_unlock bootlader , don't forget to update google usb drivers
I hard some hard time to just connect the unlocker to my phone . Now i have to wait 167 hours to complete the process .
Click to expand...
Click to collapse
I confirm it does not work from a VM (and the need for latest drivers). There is something funky going on with the USB communication when running from a VM: the first call of the fastboot executable from the windows VM generally works fine, but any other call hang. So the batch_unlock tool cannot work (since it does call fastboot several times).