Develop Bugs

[Q] huawei ascend p6 multiloader

I think i have bricked my p6 after flashing boot(b125).img from fastboot and its stuck and restarting at bootscreen. Pls someone help with heawei multiloader as am told it can fix bricked phone from usb. File now no more assessible from huawei website. pls help.

Hey do you have twrp recovery installed? Have you already tried to get into your stock recovery ?( Holding volume up/down button simultanesly during boot)

nourudeen said:
I think i have bricked my p6 after flashing boot(b125).img from fastboot and its stuck and restarting at bootscreen. Pls someone help with heawei multiloader as am told it can fix bricked phone from usb. File now no more assessible from huawei website. pls help.
Click to expand...
Click to collapse
WisdomSeeker said:
Hey do you have twrp recovery installed? Have you already tried to get into your stock recovery ?( Holding volume up/down button simultanesly during boot)
Click to expand...
Click to collapse
my phone never came with any stock recovery. had 'factory mode' not recovery when holding those bottons. In factory mode, no option for flashing anything. Now phone only restarts on bootscreen and then on-off. initially tried flashing TWRP just befor bricking phone but adb gave error like this 'partition not support flash and i had already flash a boot.img for b125

b608 version of my phone was a brick was b118 installed, there is a solution?
sorry my poor english, I'm from Turkey, please help, please..

Both of you should try to flash the stock recovery! You can download it here www).androidfilehost.(com)/?fid=23252070760973625 (just remove the brackets) .
Then follow these steps:
1. Put your device in fastboot mode ( > adb reboot bootloader )
2. Flash recovery via fastboot ( fastboot flash recovery recovery.img )
3. Reboot via fastboot ( fastboot reboot )
Afterwards try to reboot to your stock recovery . Then you can simply install over the update.app a fresh Huawei Firmware
Greetings Wisdomseeker

WisdomSeeker said:
Both of you should try to flash the stock recovery! You can download it here www).androidfilehost.(com)/?fid=23252070760973625 (just remove the brackets) .
Then follow these steps:
1. Put your device in fastboot mode ( > adb reboot bootloader )
2. Flash recovery via fastboot ( fastboot flash recovery recovery.img )
3. Reboot via fastboot ( fastboot reboot )
Afterwards try to reboot to your stock recovery . Then you can simply install over the update.app a fresh Huawei Firmware
Greetings Wisdomseeker
Click to expand...
Click to collapse
well wisdom, like i said, its restarting at boot screen so i cant get to fastboot. i sometimes able to enter an android (3e) recovery and try installing what u said but each time, installation is stopped. Got a certain miui rom and halfway it says NOT VALID OTA PACKAGE. SCATTER FILE MISSING. All other package rom or other recovery refuse to install and say ERROR. i have tried this your files but not possible.

nourudeen said:
well wisdom, like i said, its restarting at boot screen so i cant get to fastboot. i sometimes able to enter an android (3e) recovery and try installing what u said but each time, installation is stopped. Got a certain miui rom and halfway it says NOT VALID OTA PACKAGE. SCATTER FILE MISSING. All other package rom or other recovery refuse to install and say ERROR. i have tried this your files but not possible.
Click to expand...
Click to collapse
Maybe you should try To use another SD card Or mabye Format the current one and then add the update.APP To it
PHP:

WisdomSeeker said:
Maybe you should try To use another SD card Or mabye Format the current one and then add the update.APP To it
PHP:
Click to expand...
Click to collapse
No luck! I think the huawei multiloader will do the work. Any Idea where i can download?

nourudeen said:
No luck! I think the huawei multiloader will do the work. Any Idea where i can download?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2618253

I dont understand... When i start multiloader.exe it seems to go.. But i can only download update.app file with che left One button.the center button let me either download the ROM and the right button keep the tool off. What i have to do for use this magic program?

[BRICKED] Stuck in android 8.1 bootloop

I just bricked my phone :crying: :crying:
I wanna get back to the official rom, after trying android P (without make it work).
(the rom is from http://en.miui.com/download-354.html)
But I run the wrong script and take the flash_all_lock.img
And my device is stuck on android 8.1 bootloop (It boot, but i get an animated line loop ...)
Any ideas or tricks before i get it back to warranty ?
Thanks

Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.

BubuXP said:
Unlock bootloader and flash again. You can find a guide to unlock bootloader at the beginning of this guide.
Click to expand...
Click to collapse
But since I flashed the official rom with data whipe, I'm unable to go to dev option and enter OEM Unlocking .... And Fastboot respond me that my device is locked

Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem

droopeur said:
Seems like my only option left is to boot into EDL mode ...
But seems fastboot oem edl does not work I don't lnow how to handle the problem
Click to expand...
Click to collapse
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.

BubuXP said:
Have you tried to switch the active slot?
Try if it boots using
fastboot set_active a
or
fastboot set_active b
Click to expand...
Click to collapse
In fact, both work, but my phone still stucked at the bootloader (infinite line animation in both cases).
BubuXP said:
If not working, can you enter recovery (power on with Volume up button pressed)?
If you can enter recovery, hold down the power button for 3-5 seconds and then press and release the Volume up button, to make commands appear. Then your only hope is to install the OTA update zip from there (copy the OTA in a microSD card, there is a thread where you can find the link to the OTA zip).
Click to expand...
Click to collapse
Yes I can enter recovery and I have already tried this, but I always end up with the error:
Code:
E: Unknow volume for path [/sideload/package.zip]
Verifying update package...
Update package verification took 17.3 s (result 0)
Installing update...
E:Error il /sideload/package.zip (Status 1)
Installation aborted
BubuXP said:
In my opinion, "OEM unlocking" in developer options MUST be always keep active, because incidents like this could happen, and because even without modding, an OTA could go wrong resulting in your same situation.
I was in your same situation (OEM unlocking disabled and then I locked bootloader with a custom ROM installed) with a Nexus 5X.
I don't remember well how I fixed it, but I remember entering in Qualcomm download mode (should be the same EDL mode) and loading a file found after many hours of research in strange forums and sites.
Click to expand...
Click to collapse
Yes of course !
But I revert to stock rom with Mi Flash and I click on Flash all and lock, since the telephone should have been "brand new" it should not have any problems but ...
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...

after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool

LUNARIO said:
after unlock bootloader type fastboot flashing unlock_critical and flash with miflash tool
Click to expand...
Click to collapse
But since I can't activate OEM I can't unlock bootloader....

try this http://www.xiaomitool.com/ not sure if it works on our phone but maybe can unlock the bootloader so you can use miflash

Have you sideloaded the zip? I think it's better to copy the OTA zip to microSD than ADB sideload.
droopeur said:
I have to enter EDL mode, but don't know how to do it since modified fastboot executables does not activate it it just reboot the phone...
Deep flash cable may help but not shure if it works, or I may have to disassemble the device to find EDL pins...
Click to expand...
Click to collapse
There should be only two methods for entering EDL:
1- request authorization in en.miui.com forum. Sometimes the admins accept requests to give an account one EDL flash permission (but I don't know if it works with AndroidOne devices).
2- finding the test point in the phone's motherboard.

Hi guys,
i tried to install this twrp but it doesnt work...
so i searched on internet and i found another article, i tried to check the current partition and install in another way
for first:
fastboot getvar current-slot
after i do this
fastboot boot_b recovery.img
and then
fastboot set_active b
so nothing to do....but right now my MI A2 lite not boot.
i try again to check my partition but this time i have no replay.
i have unlocked bootloader but i cant go to recovery and i cant boot!!
someone can help me please?

I HAVE THE SAME PROBLEM
everything you said is completely simillar to mine. Can someone help us? Or did you already fix it? Please help me i need my phone working.

I have same problem fastboot flash but after that, it started to reboot automatically. The phone was automatically turning off and on. I again did a "clean all and lock" via miflash tool but still now, no result!
I can boot into recovery without having any problem. But when I boo to setup country date....etc, it starts its auto rebooting process,
Any help ?

droopeur said:
But since I can't activate OEM I can't unlock bootloader....
Click to expand...
Click to collapse
Same situation here. I am desperate!! Did you solve it?

Isso resolve
steledama said:
Same situation here. I am desperate!! Did you solve it?
Click to expand...
Click to collapse
gadgetsfarm.com/download-mi-a2-lite-fastboot-rom-v9-6-4-download/[/url]

How to unbrick?
Hey guys. I bricked my Mi2 Lite as well. Is there any step by step way to unbrick?

had the same problem, was stuck in the bootloop even after I flashed img with MiFlash! NOTE: MY BOOTLOADER WAS UNLOCKED!!! (LUCKLY I DID NOT TRIED FLASH ALL AND UNLOCK!)
headed to this thread
Code:
fastboot flashing unlock
fastboot flashing unlock_critical
did not work, I get error saying FAILED
but after i used
Code:
fastboot oem edl
I went to MiFlash and used "Clean all" option (again note DON'T use "Clean all and lock"!!!). It took around 5 minutes to flash and my notif. light blinked whole the time. After it say "Success" I was able to normaly boot the phone again

Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.

Hi, where i can find MI A2 Lite Tool Kit? i open my device and i can put in EDL mode., my computer detect my pone in EDL mode, but i can not know do.
I like bypass FRP, can anybody help me
Thanks.
mr_techno said:
Find "Mi A2 Lite toolkit V 1.0.4.2" and use it to flash stock 8.1, it will do all the magic with a few clicks, just don't interrupt it until your phone restarts and you get the "Welcome" screen. After you can do the upgrade to Pie via OTA.
Click to expand...
Click to collapse

Hi all,
I also had same problem and I just resolve it.
My phone was in bootloop mode after stock rom flashing...
You don't need apply "fastboot oem edl" !
Just be sure your device is unlocked.
Download first stock rom (V9.6.4.0.ODLMIFF Firmware for Mi A2 Lite). If you flash last ROM, it don't work.
Flash it with XiaoMiFlash tool (don't forget to enable "Clean All") in bottom of the tool.
After reboot, you can apply OTA updates.
Enjoy !

NO RPMB (how to install TWRP, a new ROM and using Magisk)

Hello, I have sent my phone to warranty and after that I received a phone with NO RPMB and after many frustrations I found (with help of many users and forums) how to workaround this..
To start:
Download boot image from here
Download twrp from the official website
Change the name to boot.img and twrp.img and put it in the platform-tools folder
Open the terminal there
Download your favourite rom
Enter fastboot mode on your phone
!!!!After this you will loose all of your data!!!!
Paste this to the terminal
fastboot oem unlock
(select yes on your phone)
fastboot flash boot boot.img
fastboot flash recovery twrp.img
fastboot format userdata
fastboot format cache
Reboot to recovery (if it doesn't enter at the first time enter download mode again and restart to recovery)
After that you have twrp and can flash every rom.. yay!!!
Wipe everything.
Copy the rom zip to your phone using MTP
Install your fancy new rom
If you want to install magisk:
Install the magisk manager.
On the app select install and select patch image file. (it will create a new boot image already patched)
After that install the new image (patched_boot.img) using twrp
Do a clean instalation of your ROM (recomended) or a Factory Reset first
Reboot to twrp
Select install
Click in install image
Select patched_boot.img
Select install to boot partition
Reboot.
Install magisk manager and do the sugested setup.
You now have magisk working
Thanks to all the users that helped me!!

I had real trouble getting twrp to work the last time I tried this a few months ago. Followed the steps here and am now on pixel experience with magisk. Thanks!

Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.

sigibian said:
Hello, im in the same situation of NO RPMB. This procedure will permanently lets have bootloader unlocked?
About Magisk, i can install it in usual way once im in the recovery? (I mean download latest stable version for Bullhead and flash via TWRP).
Thanks.
Click to expand...
Click to collapse
My bootloader is still unlocked after following this guide
For Magisk:
-Install your custom ROM and boot it up (without root)
-Then extract the boot.img from the ROM zip file and save it on your phone storage.
-Install the Magisk manager apk
-In Magisk manager, select install Magisk> choose the patch boot image option and -Select the boot.img you previously saved.
Once it's done, reboot into twrp and flash the patched boot.img. When you reboot Magisk will be working.
I've had no issues with my bootloader, even after an ota update for pixel experience.

Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656

sigibian said:
Thank you, i will try it.
Another question. I never tried dowload mode before, as i read in other post i should Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb that's already connected to pc, right?
When in download mode i can fire up fastboot commands like im in bootloader mode?
So then after do last command fastboot format cache i can reboot to recovery from terminal using adb reboot recovery or i can / should do it from device?
About twrp it's ok to use the latest 3.2.3.0 official version or the 3.2.1 4core version from here as someone suggested from Reddit? https://forum.xda-developers.com/nexus-5x/development/recovery-twrp-3-2-1-4-core-t3796656
Click to expand...
Click to collapse
The official twrp works for fine for me, haven't tried the 4 core version but it can't hurt to try if you need it.
Power off your phone then press and hold volume - and power to enter bootloader, then connect to your pc and follow the steps in the OP

So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache

sigibian said:
So i have to enter in bootloader mode? At point 6 of OP there is written to enter in the download mode, this makes me confusing.
Can anyone explain me latest 2 commands why they are needed?
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.

baddesthad said:
This thread is fairly comprehensive;
https://forum.xda-developers.com/nexus-5x/general/moto-nexus-5x-sticky-roll-t3207487
Holding volume - and power takes you to fastboot mode (download mode essentially), theres also an option to reboot into recovery (selectable using the volume keys.)
Formatting user data and cache is necessary prior to installing a new rom (especially if moving from stock). You lose all data (back up first!) But a clean flash is the best place to start.
Click to expand...
Click to collapse
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.

sigibian said:
Thanks for the explanation but for installing a new ROM usually you can do factory reset directly in TWRP, plus doing all the wipes, this should be enough.
About fastboot mode and download mode, they are completely different, fastboot mode: vol down + power, download mode for LG: Plug USB cable into pc, Hold volume up and power at the same time and plug phone into usb.
My question is what i can do in download mode? As OP says after entering download mode open terminal and use fastboot commands.
Click to expand...
Click to collapse
You need to use vol- and power to go into fastboot mode then connect to the pc. As for userdata and cache, if you don't clean them when coming from stock you will have issues (your data will be encrypted if you're on stock?). As I said this guide worked for me. The op was talking about fastboot mode in the 6th option (also there is much more information in the thread I linked above)

sorry for the confusing i wanted to say fastboot mode..
i knew the thread that you are saying but most people doesn't want to search so I made a little thread only with the needed parts..
I use it myself so I have a place to remember all the steps when I need to change the rom to a new one or when I make experiments and brick my phone XD

If anyone know anything else that should be in here just say, I really want to improve the post

Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?

fhartane said:
Hi. I just went through the whole process several times (I have tried the different modified boot images from the dedicated post) and my device is still locked [emoji24] any suggestions?
Click to expand...
Click to collapse
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not

PedroM.CostaAndrade said:
your device will always be locked this is a workaround to get twrp, new roms and magisk while it stays locked..
with twrp usable it won't matter if you are locked or not
Click to expand...
Click to collapse
Thanks for the answer. You mean that now I have twrp, I can flash custom Roms with my bootloader locked without any issue?
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk

Yes if you have TWRP you can install custom ROMs, custom Kernel's, magisk, super su, etc..
the locked bootloader only prevents you from using fastboot commands like the one needed for installing custom recovery
Now that you have TWRP you can use it for everything

Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?

Fabiojoker said:
Hello everyone, I also have a nexus 5x with motherboard that has been replaced under warranty and unfortunately I can't keep the bootloader unlocked.
I tried the procedure you have indicated, but at this point there is the problem, because after inserting the boot.img and twrp.img inside the phone, then when I go to do the unlocking procedure with 'fastboot oem unlock (select yes on your phone) 'in practice the memory is deleted on the phone, so I lose the previously uploaded files, and therefore I can no longer continue with the flash procedure of boot.img and twrp.img because they are no longer present in memory.
I hope I made myself understood, maybe I am wrong, or is there a way to solve this problem?
Click to expand...
Click to collapse
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC

Hello, thank you for your information, since I haven't done modding on phones for a long time, I didn't remember exactly the procedure with fastboot and therefore I didn't understand where I had to put the files, but in the end I did it.
Thank you
PedroM.CostaAndrade said:
fastboot is for the files on your PC not your phone
you need to put the files inside of platform-tools and then open cmd inside it and use the fastboot commands
fastboot will take the files of your PC
Click to expand...
Click to collapse

Why is a custom boot image needed? I don't want to root.

Need little bit help with bricked Note 8 Pro

Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.

Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
Click to expand...
Click to collapse
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.

fastjohnson said:
Flash your original boot.img for your original firmware or just download the xiaomitoolV2 and flash it that way. I see a lot of people flashing stock firmware using TWRP. Hence the v2 tool only works if your phone still fully boots. NOTE do not flash stock FW or UPDATE using TWRP you will brick the device. Chances are your FW didn't flash and just ADB CMD fatsboot flash boot ( then set BOOT.IMG ) in the CMD and get the devices booting again. Then use the V2 tool to flash the global firmware get that to stick then use the ifelixit tool to flash recovery once in recovery go advanced file mgr system-root at the bottom delete boot P then close AVB 2.0 then hit the install root button SU - magisk 19.4 will be installed. no need to wipe or format the phone ( DON'T FORGET TO WIPE CACHE & DALVIC.
---------- Post added at 09:00 AM ---------- Previous post was at 08:52 AM ----------
Remove the back off the phone and disconnect the battery for 5 min just to be sure hold the power button to clear all power left in the phone. Main objective is to get useage again fastboot or recovery. If you get recovery sideload your boot img and flash it on the next reboot twrp will be overridden.
Click to expand...
Click to collapse
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....

idog8818 said:
Thanks. Currently my phone doesn't have reboot, no recovery, purely blank on screen, only power led shows when connecting via USB. In this situation, must open back case to disconnect the battery? I heard about it's free to go back to mi store and re flash it back. To open back case it won't have warranty anymore. Struggling....
Click to expand...
Click to collapse
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!

Same
Hello,
I think I did the same error, flashing a wrong boot.img...
I tell you if I manage to do something.

hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72

danyv77 said:
hello, the solution to the problem is the battery is completely discharged until the device stops responding to any attempts to start using the key combination. unless you tried to flash a fastboot partition. the solution works after hard bricking after trying to upload incompatible twrp or other rom (I uploaded Chinese twrp on eu rom). ok, we start:
1. holding vol - and power plug in the usb cable (the buttons are released when the notification LED changes from very bright for a moment to slightly dimmed)
2. you will see the long unseen battery symbol with a lightning inside (i.e. a completely discharged battery, the charge status will begin to show the percentage)
3. Turn off the USB cable at 3 percent.
4. now an important thing - you need to start the phone only trying to enter the fastboot mode otherwise the phone will start to boot the system and get stuck again and you will have to unload it again
5. you will finally enter the fastboot , using only the software from xiaomi or xiaomi flash and fastboot rom
I succeeded after 2 weeks of waiting for it to discharge ...
I copied this tutorial from this partner klocek80 , and it worked perfectly
https://forum.xda-developers.com/showpost.php?p=81191977&postcount=72
Click to expand...
Click to collapse
This only helps when boot image is not damaged.

Duchan_xda said:
I also have two bricked phones note 8 pro with no recovery, only white led shows when connecting via USB.
First bricked with TWRP and then flashed with false boot.img, second is bricked with OrangeFox-Unofficial-begonia.img.
I was open back case and disconnect the battery, stay 3 days but nothing working to reboot to fastboot or recovery.
Also I have already tried with short circuit test point to EDL mode but phone is still dead. I have downloaded many xiaomi and other tools and firmwares, installed all available usb drivers and reading all internet forums.
Please help!
Click to expand...
Click to collapse
I'm with you. The boot image has error and when MTK realize it has something wrong it will NOT enter into fastboot. The only way to fix this is too use SP Flash Tool for deep flash. Mi store uses this way as well to fix the issue.

Try this:
https://c.mi.com/thread-2173190-1-0.html

ppthom said:
Try this:
https://c.mi.com/thread-2173190-1-0.html
Click to expand...
Click to collapse
This does NOT work. Please don't waste time on it.

:good:Thanks for clarifying this. Back to square one ...

idog8818 said:
Hi everyone,
I got Chinese version Note 8 Pro from Mi official store and unlocked bootloader after 7 days.
I downloaded Global MIUI 11 ROM via official miui download link, "ifelixit+FLASHER+TOOLKIT+Begonia" and installed ADB drivers etc.
After run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1, it installed recovery, then I'm able to boot into TWRP, and then I installed global rom from there, meanwhile wiped everything in it as I don't need China version rom. Phone reboot well and new global rom works great.
Then I try to install Magisk, I noticed recovery seems be restored to original, no worries, I re-run ifelixit+FLASHER+TOOLKIT+Begonia.bat and pick 1 to install TWRP again. Whatever I did, I cannot get TWRP back, when I hold power/+, it keep blank and will restart, but if I don't hold them, it can get into the system.
My first question is: 1. At this stage, is recovery crash already?
I didn't think too much and I get into system, install Magisk manager, let it to patch boot.img, I then use following command in fastboot mode
fastboot flash boot boot_patch.img
After I finished, I noticed maybe I can do TWRP here as well, then I also input
fastboot flash boot TWRP.img
After reboot, the phone is dead....No fastboot, NO recovery, no vibration. exactly described as here
[UNBRICK - stuck on DA mode / Authorised Service Account required]
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
I re-think what I did, my question is
2. Will boot_patch.img Magisk patched not suitable for China phone with global rom?
3. Is fastboot dead because I installed recovery into boot via fastboot flash boot TWRP.img?
Thanks for your time and appreciated for any knowledgeable reply.
Click to expand...
Click to collapse
Are you recover your phone? I'm still waiting one year...

Duchan_xda said:
Are you recover your phone? I'm still waiting one year...
Click to expand...
Click to collapse
I didn`t find any background on your issue, just something like you actually have a device with white led light blinking.
I read this thread before (yes, some weeks ago) this happened to me yesterday https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-unlock-note-8-pro-authorised-t4168805 the short story is that I were trying to return to Miui 12 after of using some custom ROMs and something in the flashing process failed I mean it was an incomplete flashing and I assumed that most probably just the bootloader partition was damaged. The whole important fact in this situation is that you have yet available fastboot mode but like the splash partition with its image was gone I couldn `t see it and I were anyway in fastboot mode so I could flash the proper files to "unbrik" it. (my device is unlocked)
What you should try is connect it with PC while you`re pressing the volume down, enter to adb/fastboot environment and type fastboot commands to see if device is recogniced, you don`t have to hear constant reboot sounds or in this case press the power button simulating that you are powering off device.

how to flash recovery img ?

Hello, on any custom roms we see recovery as img, so whats the ultimate good process to actually flash it?
img to tar bootloop
any other recovery bootloop
only one thats working is "twrp-z3s-3.5.0_10-A11_6+vbmeta_DUB5" BUT i have x1s, so pain to flash some rom.
Im currently on beyond rom 3.1, because i cant flash anything else.
Any help here?

Try flashing vbmeta.img after flashing recovery

like download mode -> recovery, then download mode again and only vbmeta?
didnt try that, ill try it right away
edit:
1) download mode -> AP EXYNOS-G98X-LINEAGE-RECOVERY-20200709
2) booted up rom
3) turned off -> download mode -> USERDATA vbmeta.tar from beyond rom
4) bootloop, up button and power same thing

i dont know if i should try stock and then go for root again or what exactly do.. i dont want to lose any data now. It got really complicated, since i go from root apk clockworkmod era.
maybe magisk is the issue? since i have it installed

Go to fastboot
Flash recovery
Flash vbmeta
Reboot
If fastboot doesn't like extensions of your images, change them to .img

how can i get to that? on TWRP if i do reboot -> fastboot, im still in TWRP and "fastboot devices" shows completely nothing (not even list of devices or whatever)
when i go to bootloader mode from magisk i just see "entering fastboot mode.." and thats about it, no fastboot commands work

b30wu1f said:
how can i get to that? on TWRP if i do reboot -> fastboot, im still in TWRP and "fastboot devices" shows completely nothing (not even list of devices or whatever)
when i go to bootloader mode from magisk i just see "entering fastboot mode.." and thats about it, no fastboot commands work
Click to expand...
Click to collapse
Move vbmeta.img to your phone and go to Install section. Install it and reboot.
Also, TWRP offers an option to reboot to bootloader. You can try it too

well, i flashed lineage recovery img and then vbmeta, phone booted up, but got probably original recovery. its really frustrating. Do you have any valid and working "tutorial" to get the recovery working ?

i just need recovery thats x1s, so it should be probably lineage recovery, but cant install it. Im starting to hate these new phones.

I'm sorry, I don't have any specific tutorial, but in general:
adb reboot-fastboot
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot reboot-recovery
If this doesn't work, search for your specific device on XDA. You shouldn't hate new phones, you should hate people who sell them, because they make everything hard so you won't switch from their software, which spies on you.

tried TWRP that works, installed as img lineage-18.1-20210224-recovery-x1s.img and now it suddenly worked. Thank you for help, after 6 hours =)