Hello,
I just recently had a Dasaita Max6 installed in my 2014 Fiat 500. What adapter do I need to make steering wheel controls work? Thanks!
Related
Hey peeps, I'm looking at biting the bullet on a 9" Dasaita PX5 4gb/32gb head unit for my Subaru Forester.
It is replacing the stock Nav unit which has fuel consumption data among other things.
I'm wondering if I will be able to use an app like Torque tools to see that data over the existing Canbus connection or do I need to use a Bluetooth odb2 plug or something along those lines?
If I do have to use an odb2 plug can I connect my phone via Bluetooth at same time? Any advice or suggestions on Android head unit model choice and Dasaita reviews would be appreciated.
9" Android 8.0 Car Radio GPS for Subaru Forester Navigation 2008 2009 2010 2011 2012 Head Unit 4G 32G Octa Core
Search it on AliExpress. I can't post links yet apparently
Hello, i dont have a Subaru while using a Dasaita HU. IMO, if you have a Canbus converter box, and it already show some car's info before on the original HU, it will show the same on your new HU.
Case of using odb2 connected by Bluetooth, you can even connect Bluetooth with your smartphone at the same time.
My truck is a bit older so I didn't have any factory steering wheel controls.
With my previous pioneer units I was able to use an aftermarket steering wheel control that had a 3.5mm jack that plugged into every other radio I've had over the years. But my new PX6 unit doesn't have a 3.5mm jack....
Is there a specific wires on the Dasaita units that need to be connected to my 3.5mm wires? I can chop the end off if needed but I honestly have no idea what wires do what.
Am I wise to purchase different steering wheel controls?
For what it's worth, I was using this before with my other stereo https://axxessinterfaces.com/product/ASWC-1
What kind of " aftermarket steering wheel control" do you have ?
I think you can use it by connecting the "tip" of the jack to SWC (Key) of navigation, and the ground of the jack to the ground wire of navigation ...
I have a Seicane headunit and it has inputs for CAN HI and CAN low. If I connect these straight to the Canbus could I pull the OBDII data from the car? or is a CANBUS decoder required? I don't need it for steering wheel controls or anything else. I would just like to see some OBDII data.
Head unit is a PX5 4gb+32gb
If you're talking about the 2 pins on the harness connector that goes to the car those 2 wires go to another smaller connector that plugs into the CANbus decoder. So yes you need a CANbus decoder but those ELM327 OBDII dongles are dirt cheap.
Hi everyone,
I am trying to get my steering wheel controls working for my 2013 Volvo XC60. I purchased a P5 unit from Seicane and updated it with HAL9K Mod V4, which made the unit very stable with no issues. The only problem I am having; which I had before the update, is that I cannot get my steering wheel controls to work. The unit came with what looked like a CANBUS connector as part of the harness, but no box. Looking at my Volvo wiring diagram, I only have one wire for steering wheel control. When I connect that wire to KEY 1 or KEY 2 and try to program a button, it randomly ask me to select a function to assign a key.
Going through the wiring, the harness creates a bridge with the wiring harness for the information screen. It bridges off three connectors to the stereo harness and the connector that looks like its for a CANBUS BOX. The three wires are 2 CANBUS lines and a line that goes to the steering wheel remote. Since my vehicle is 2013, I think that i would need a CANBUS decoder box and that the unit should have come with one. Again, if its not needed, the only thing I can think of is bridging the lines from the CANBUS lines & steering wheel control wire that pull from the vehicle directly to the head units 2 CANBUS input lines and the KEY 1.
Sorry if this is confusing. Just seeing if there is something I am missing.
Please let me know if there are any details that I did not provide that would help solve the issue. Thank you.
Hi all,
Hopefully there's a simple answer to my issues. I had one of these units delivered today and was told by the seller that it will include all required cables to have everything working as expected.
Dasaita 9" Android 10.0 Bluetooth Car Radio with Carpaly for Nissan Qashqai J10 2008 2009 2010 2011 2012 2013 2014 Car Stereo Android Auto DAB DSP 4GB/64GB Support Wifi SWC USB GPS Navigation: Amazon.co.uk: Electronics & Photo
Free delivery and returns on eligible orders. Buy Dasaita 9" Android 10.0 Bluetooth Car Radio with Carpaly for Nissan Qashqai J10 2008 2009 2010 2011 2012 2013 2014 Car Stereo Android Auto DAB DSP 4GB/64GB Support Wifi SWC USB GPS Navigation at Amazon UK.
smile.amazon.co.uk
It included the DYX028 cable as stated in the description which will be required for the camera and steering wheel function ( If your car has Bose Amplifier, 360 camera, original USB and AUX, please buy the DYX028-1 cable (B07M5WHM3M)
I have the unit installed, but there was nowhere to connect my 360 camera button to and the steering wheel controls are not working.
Any advise will be greatly appreciated