Is there any electronic diagrams of HTC10 ? I never came across in the web except Charging circuit.
Im having some kind of sensor problems, i want to be sure its because of HW so i need schematics.
Anybody knows or has diagrams?
Thank you very much for your answers.
alicine said:
Is there any electronic diagrams of HTC10 ? I never came across in the web except Charging circuit.
Im having some kind of sensor problems, i want to be sure its because of HW so i need schematics.
Anybody knows or has diagrams?
Thank you very much for your answers.
Click to expand...
Click to collapse
Might not be what you're looking for but can give this a try.
Think need to be on a stock ROM.
https://www.htc.com/mm/contact/productissue/htc/84976e25-1a41-9fad-abe7-5811b1913edf/
thank you very much @andybones i can confirm that its HW problem. All those sensors broken
thank you very much @andybones i can confirm that its HW problem. All those sensors broken
Related
In the first post I just want to salute all users of this forum and I hope to help me to solve the problem with a HTC P3300 that is dead.
The phone was dead when I get it and I so there is no suffers mechanical shocs or to be damaged by water or something liquid.
When I conect it to a power supply and push power on the device start consuming about 110 mA and just stay in that mode.In other devices the problem was solved by replacing the quartz that gave the tact frequency to CPU or by resoldering the CPU.With this I've made both things but no way to work.If someone had this problem before I just want to tell me how did solve it;where can I found it's diagram schematics or a service manual.Can be this a software problem and possible need to flas it via jtag procedure?
Thanks a lot and I hope to repair it!
After a few hours of work on it I succed to make it working.The problem was from flash chip(resolder it and it's OK).I also find a service manual for it but it's not good(it show how to assembly/dissasembly the device).
All the best!
Hi there..
nice thing if you can make this work...
I have brick of artemis and I think it is software problem..as you said.
is there instruction how to do it?Or how much you charge for it?
cheers
Z
If it's a software problem here are tutorials on how to fix it;if it's hardware You must have have experience to work on this kind of phones.
Good Luck!
MarianG said:
If it's a software problem here are tutorials on how to fix it;if it's hardware You must have have experience to work on this kind of phones.
Good Luck!
Click to expand...
Click to collapse
Hi!
Could you please give us the tutorials? A friens has bricked his Artemis and I would like to try to bring it back.
I have the dash for two weeks now (wm6.5)... about 3 days ago and out of the blue the lcd started to show this white scanlines. It was just placed next to the pc and connected by the usb cable when i noticed the problem (it wasn´t phisically damaged). I hard reseted it...nothing. Installed wm6 and wm5 and nothing.. the lines are still there. I am pretty upset with this matter
Is it the lcd or something else..?
How can i fix it and prevent this to happen again?
Does anybody know if this problem is covered by the warranty and under which arguments?
Thanks.
Here is a picture of the screen so you can get an idea...
http://www.subirimagenes.com/otros-htc620whitelines-3724327.html
Not a single answer to this post! Come on guys i am desperate...
MProdigy said:
Not a single answer to this post! Come on guys i am desperate...
Click to expand...
Click to collapse
Maybe something is loose regarding your lcd (hardware), If you haven't dropped maybe you should give a shot with your warranty and probably you will get a new dash
sure you have problem with your display.you must change,or if it is new go to store,for change.good luck,and a happy cristmanth
if you say you already did some hard reseting then it's a hardware problem.. if the warranty does not cover it then try to disarm it following the instructions that you can find in this forum.. suerte amigo!
Thanks guys for the advices. I purchased a new lcd, relaced it and now it works right, seems like the problem is solved. I hope i don´t get any more problems in the future cause the dash has everything i want in a mobile phone.
MProdigy said:
Thanks guys for the advices. I purchased a new lcd, relaced it and now it works right, seems like the problem is solved. I hope i don´t get any more problems in the future cause the dash has everything i want in a mobile phone.
Click to expand...
Click to collapse
Good to know that you solved your problem
Hi Guys,
I have recently cracked my HTC WFS touch screen and got it replaced from a local retailer. After replacing , the screen's top most part is not responding properly. I mean, If i try to power on the WI-Fi using the notification drawer , it is selecting something else (may be a message that is kept unread in the notification drawer). The guy who repaired it told me that it is not a hardware issue but a software issue. He told me that recalibrating will fix this. For this purpose, I have flashed a ROM (Wild child 3 - thinking this is almost same as the stock ROM) and still i have that issue. Please help me on how can i recalibrate the display and thus solve the issue mentioned above.
Thanks
I have seen this thread and sadly nobody answered it. Hence adding a new thread with more info.
Send it back, it's definitely a hardware issue.
http://forum.xda-developers.com/showthread.php?t=1436314
Check this tutorial out. Worth a try. It sorted my touchscreen problem.
gort2000 said:
http://forum.xda-developers.com/showthread.php?t=1436314
Check this tutorial out. Worth a try. It sorted my touchscreen problem.
Click to expand...
Click to collapse
OP got his phone back from a reseller that won't do complete work.
Solution is to send it back to reseller.
omnomnomkimiiee said:
OP got his phone back from a reseller that won't do complete work.
Solution is to send it back to reseller.
Click to expand...
Click to collapse
Thanks a lot for the response guys
Hi @omnomnomkimiiee, The seller himself told me that this ain't a hardware problem and I have to calibrate this again for this to work . But i don't think that this is a calibration issue, since all other parts of the touch screen is working fine. Only a particular part is not working. So, i guess this could be a hardware issue. Please correct me if I am wrong and Thanks a lot for the response friends
rishr4 said:
Thanks a lot for the response guys
Hi @omnomnomkimiiee, The seller himself told me that this ain't a hardware problem and I have to calibrate this again for this to work . But i don't think that this is a calibration issue, since all other parts of the touch screen is working fine. Only a particular part is not working. So, i guess this could be a hardware issue. Please correct me if I am wrong and Thanks a lot for the response friends
Click to expand...
Click to collapse
You should most definitely have him take it back. You trusted him with it to replace a broken screen, and he returned it with a broken digitizer.
I need the Pixel Phone Hardware Diagram, to fix internal problems on the motherboard of the computer, does anyone have any idea where to get it or if you have it on hand please
kiomet said:
I need the Pixel Phone Hardware Diagram, to fix internal problems on the motherboard of the computer, does anyone have any idea where to get it or if you have it on hand please
Click to expand...
Click to collapse
I have original Pixel Xl
I went Settings tips and support. Searched phone hardware diagram. Phone Diagram
So I included link. I am new trying to help.
Moneymasternow said:
I have original Pixel Xl
I went Settings tips and support. Searched phone hardware diagram. Phone Diagram
So I included link. I am new trying to help.
Click to expand...
Click to collapse
I believe he needs mainboard schematics. Those are difficult to come by.
@OP: what are you trying to fix ?
Helpful
Hello everybody,
I bought a Samsung Galaxy Z Fold 3 last year.
Until August 2022 I have never had any problems.
Then now it is not possible to enable wifi and when I open it the audio no longer works.
I called Samsung about the warranty and they told me it's not covered by the warranty for them because it has a small mark
in a corner of the smartphone, absurd.
So since I am an IT and electronic technician and I have already repaired Iphone in the past, I am trying to repair it myself.
Also because to repair it out of warranty they asked me for 600 euro.
I have already opened the back cover and checked the various flex cables.
I wanted to ask you if there was a Fold 3 hardware expert among you, I mean that he knows the various components.
for example for the wifi problem that does not enable what should I look at exactly, does it have its own board or a flex cable that I can replace?
For audio not working when I open it here too maybe it could be a flex cable problem.
I have yet to open the main display to see the other components.
Let me know if there is any expert.
Thanks
Mysteriis122 said:
Hello everybody,
I bought a Samsung Galaxy Z Fold 3 last year.
Until August 2022 I have never had any problems.
Then now it is not possible to enable wifi and when I open it the audio no longer works.
I called Samsung about the warranty and they told me it's not covered by the warranty for them because it has a small mark
in a corner of the smartphone, absurd.
So since I am an IT and electronic technician and I have already repaired Iphone in the past, I am trying to repair it myself.
Also because to repair it out of warranty they asked me for 600 euro.
I have already opened the back cover and checked the various flex cables.
I wanted to ask you if there was a Fold 3 hardware expert among you, I mean that he knows the various components.
for example for the wifi problem that does not enable what should I look at exactly, does it have its own board or a flex cable that I can replace?
For audio not working when I open it here too maybe it could be a flex cable problem.
I have yet to open the main display to see the other components.
Let me know if there is any expert.
Thanks
Click to expand...
Click to collapse
Maybe this video can help you , identifying components
Good Luck !
Copy and paste this video link into a browser:
youtube.com/watch?v=MDj_c98vtrI&list=FLe0EqeoVT8o48mdyH3KJ09w
Thanks for the reply, it was a great video I had already seen it.
But I'd like to talk about it with any of you who already know how to solve my problem.
Thank you
Mysteriis122 said:
Thanks for the reply, it was a great video I had already seen it.
But I'd like to talk about it with any of you who already know how to solve my problem.
Thank you
Click to expand...
Click to collapse
Seems to be a very common problem , lots of info about it with many solutions that work for some owners
One of them :
https://www.reddit.com/r/GalaxyFold/comments/qfwcee
Good Luck !