Develop Bugs

Rom 6.1 for Hermes

Pdaviet going to realse Rom 6.1 for Hermes. Everybody can see it here
http://www.pdaviet.net/showthread.php?t=20432

Can you please translate?
Google didn't do the job...

elivne said:
Can you please translate?
Google didn't do the job...
Click to expand...
Click to collapse
They say that They'll release rom 6.1 for hermes maybe 28-30/1/2008. This is a test version.

That's a great news... I hope they'll release a WWE version too

Drakknar said:
That's a great news... I hope they'll release a WWE version too
Click to expand...
Click to collapse
all in good time...

Thanks, it's a good new

Is this for real? Has WinMo 6.1 for Pocket PC been released for testing to developers?
Can any developers confirm or deny?
Best regards to all..

faria said:
all in good time...
Click to expand...
Click to collapse
you are welcome Faria any news with your roms
It was so fast roms

excellent news on wm6.1 for hermes, can't wait for this forum to get their hands on it!!

viets sent spies to htc headquarters and stole a 6.1 rom?

I have already used WM6.1.

AikonCN said:
I have already used WM6.1.
Click to expand...
Click to collapse
Care to share some impressions?
Xie Xie

elivne said:
Can you please translate?
Google didn't do the job...
Click to expand...
Click to collapse
http://translate.google.com/transla...ad-7612-1-1.html&langpair=zh|en&hl=en&ie=UTF8

Grabbed it here u go its on rapid os.nb xip blah blah
http://rapidshare.com/files/87218653/ROM_19195_0123.rar.html

There seem to be instructions on grabbing the other parts of the OS on the thread itself (see galaxys translation link).
At work (UK) so no time to look at what's in it just now.
Anyone here in leisure mode and care to thumb through it?
(Would be nice if this became the Hermes Mobile 6.1 forum)

KarhU said:
Care to share some impressions?
Xie Xie
Click to expand...
Click to collapse
I'm gald to see you know what's the meaning of "Xie Xie",
It means "thanks" in Chinese.
I have already used Windows Mobile 6.1 for several days,
some experiences here:
1.I've never met such a fast system, I think it makes full use of the hardware of Hermes, its speed will amaze you;
2.The Stability is one of most important things of one system, I think its stablily will satisfy you, I've never met system crash.
BTW,
I downloaded a "WM6.1" and dump it which you mentioned above ,
I'm very sorry to see the XIP part comes from WM6.0,
there is some components of WM6.1 in SYS part,
Do you think it's a real "WM6.1"?
That's all.

@AikonCN
thats real nice....
anything new here?
would you mind to post some screen shot and and thing/soft new in WinMo6.1

Here is a google translation of the first post:
[CHT9000] world premiere 19,195 template (6.1 kernel) (available for download) ~ (plus Bluetooth patch, ring tones patch)
版本号：5.2.19195（内部版本19195.1.0.0） Version: 5.2.19195 (internal version 19195.1.0.0)
看大家都执迷于假核心，俺们也HEX了一下版本号来玩，呵呵，19195的版本号是假的，但这个核心却是真正的6.1（AKU 1.0.0）。 See everyone obsessed leave the core, the HEX俺们also play some version of, Oh, 19195, the version is false, but this is the real core 6.1 (AKU 1.0.0).
简要说明： Brief Description:
1、OEM部分更新了一下新版软件,包括以下软件： 1, OEM part of a new software update, which includes the following software:
来电精灵0.96FINAL Call Wizard 0.96 FINAL
PocketCM0.19
PPCPimBackup2.8
HTC_BT_SAP_3_06_0_0
HTC_StreamPlayer=3_0_17201121_00 HTC_StreamPlayer = 3_0_17201121_00
Music_Plug-In_1_0_731714_0
Network Plugin 1.0.30468.1 Network Plugin 1.0.30468.1
Windows Live 10.6.34.800 Windows Live 10.6.34.800
去掉了SRSRemoved the SRS audio enhancement and contacts enhance two OEM (generally reflected problems).
修正了RESCO EXPLORER6.17的中文路径支持问题其他软件版本请参考上一版的模板： http://www.xbeta.cn/thread-6740-1-1.html That the path RESCO EXPLORER6.17 support for the Chinese versions of other software, please refer to a version of the template: http://www.xbeta.cn/thread-6740-1-1.html
2 2, revised the drive of the previous version did not test whether or not the problem in the solution.
Notes (Be sure to read carefully!):
1、HTCHOME插件的WAP整合版目录下的WmpPluginToday.dll我删了，如果只选HOME，不选HTC桌面音乐插件，请从Plugin_Music_Plug-In_1_0_601718_0目录下复制一个到Plugin_HTCHOME_0_CMWAP目录下。 1, HTCHOME plug-in WAP-integrated version of the directory WmpPluginToday.dll I cut, if only HOME election, the election of HTC desktop plug-in music, from Plugin_Music_Plug-In_1_0_601718_0 copy of a directory to Plugin_HTCHOME_0_CMWAP directory. 如果同时选HTCHOME插件的WAP整合版和HTC桌面音乐插件就不必了。 If elected at the same time HTCHOME plug-integrated version of WAP and HTC desktop plug-ins do not have the music. 另外，音乐插件一播放就反复重启的问题请先去运行音频管理器一次。 In addition, a plug-in music player repeatedly on the issue of resuming the post to run for an audio management.
\Input_plumsip6_Beta2）下的keycode.ini己换一下适合的keycode.ini。 2, the plum blossom 6 BETA2 official version of the skin (the position oem \ Input_plumsip6_0) keycode.ini is suitable for the Asian version of the 9000, alone on the keyboard keys can be switched according to text in English, unofficial version of the skin (oem \ Input_plumsip6_Beta2) under the keycode.ini is the keyboard + space by switching point in English, in accordance with their own cell phones to use for any OEM to your own suitable keycode.ini. 6 Plum Blossom feeling really good, please help with studying and reuse.
3, on the default input method, the English keyboard template, A4, A4 and the plum blossom 6 BETA1, plum blossom 6 BETA2 the official version of the skin, skin unofficial version of these are provided with the default, that is, in these elections will please one can not be activated. （英文键盘加上A4(English keyboard input with A4 will be only Chinese, the issue unresolved)
http://www.xbeta.cn/thread-5996-1-2.html ，务必看好再用！ 4, palm calendar and the weather-related explanation see http://www.xbeta.cn/thread-5996-1-2.html must be good then! ！ ! 凡选这两个中的一个都要仔细看好里面的说明。 Where the two elections should be careful in a good note inside. （掌心万年历的2.8RC3把节日分 (Palm calendar 2.8 RC3 of the festival is divided into user and system festive holidays, palm calendar of festivals and user-weather festivals were used festivals.txt document, a document that I only on the weather online directory, the two not a radio problem. needs attention is that if these two choices at the same time, you palm under the calendar system festive paper sys_festivals.txt emptied the contents, otherwise palm festival calendar will be displayed twice. specific content to the above look at the links,)
5、开机画面在Splash目录下，00_MainSplash.nb和01_SubSplash.nb分别为第一和第二开机画面，不需要刷这个的，请在生成ROM之前将这两个文件删除或重命名。 5, boot screen in the Splash directory, and 01_ SubSplash.nb 00_ MainSplash.nb respectively for the first and second boot screen, do not brush this, please ROM in the production of these two documents before deleted, or renamed. 这两个文件如何来的，请自行搜索有关开机画面的制作方法。 These two documents how, please search of the boot screen their own production methods.
6、模板生成之前请先把杀毒软件禁用，否则在重排地址环节很容易出访问被拒绝的问题。 6, template generation before you disable the antivirus software, otherwise the rearrangement address links very easily refused to visit the issue.
7、请多看各OEM上面的提示信息，大多数需要注意的信息在里面都写了。 7, please read the information that OEM above, the majority of attention to the needs of the information in the written inside.
8、个人信息在USER_OEM\00Personal目录下，想替换成自己的就替换原来的(主人信息需要自己去手机中导出注册表再粘贴进里面的RGU才行)，想加自己的OEM软件也可以直接放在USER_OEM目录下。 8, personal information in USER_OEM \ 00Personal directory, Xiangti change on its own to replace the original (masters of their own information needs to phone Export Registry to paste into the RGU才行inside), to increase their own software can also direct OEM on USER_OEM directory.
9、关于那些桌面插件的开关不起作用的问题：请选择所有插件开关的OEM目录（OEM目录下所有PluginOnOff_打头的目录）全选，然后剪切，粘贴到其他目录，再剪切粘贴回来就OK了。 9, those on the desktop plug-in switch non Question: Please select all of the plug-in switch OEM directory (OEM directory of all PluginOnOff_ beginning directory) SELECT ALL, and then shear, and paste it into other directory, then shear paste back on OK.
10、注意： SYSTEM下的客户反馈项是必选项，请一定要选择，否则系统不能使用 ！ 10, NOTE: SYSTEM of the customer feedback is a necessary option, we must choose, or can not use the system! 这是和18XXX不同的地方 This is XXX and 18 different places
11、HTC_LongPressEndKey的功能感觉不实用，虽然OEM软件还在模板里，但是长按挂断键的功能不再执行此程序，模板中现在的长按挂断键的功能就是断开数据连接，和HTC_LongPressEndKey的OEM没有关系。 11, and they do not feel HTC_LongPressEndKey practical function, although still OEM software template, but long on the function keys no longer hang up the implementation of this procedure, the template is now hung up on the long bond is the disconnect function data connections, and HTC_LongPressEndKey The OEM does not matter.
12、关于三个闹钟软件，addintimer中播放MIDI可能会难听，是因为调用的fmodce.dll的关系，如果要用MIDI的音乐，就把Alarm_AddinTimer下的fmodce.dll文件删了然后再定制，他就会自动调用系统本身的解码器就会正常了。 12, three-alarm software for playing MIDI addintimer may badly, because the call fmodce.dll relations If we want to MIDI music, they Alarm_AddinTimer under fmodce.dll delete the file and then custom, he will automatically call the decoder system itself will be normal. （另两个闹钟OEM目录下也有这个文件） (The other two alarm clocks OEM directory also has this document)
本模板谢绝转载，如有引用模板中的内容请清楚注明！ The template declined reproduced, if used in the template, clearly marked with the contents please! ！ ! ！ !
NOTE: Please fight after downloading patches reuse.
了addintimer。 NOTE: fluttering in the address provided below has been playing the 1-7 patches, and updates the addintimer. （2008－1－25 9：50） (2008-1-25 9:50)
补丁 ： Patch:
1、,请下载后覆盖到SYS\OEMAPPS目录下。 1, to cover the downloading of SYS \ OEMAPPS directory.
2、删除MMS_4_0_31_34下的Amr.enc，和OEMAPPS下的重复了。 2, to delete the Amr.enc MMS_4_0_31_34 and OEMAPPS under repeated.
3、如果你的一卡多号显示不正常了，请下载：，用里面的rilgsm.dll替换模板中的SYS\OEMDRIVERS下的同名目录重新刷机。 3, a card if you do not display more of a normal, please download: with the rilgsm.dll replacement template inside the SYS \ OEMDRIVERS directory under the same name re-brush machine.
4、 解决蓝牙问题的补丁 ：因为替换了OEMDRIVERS下的几个MODULE，造成了蓝牙不能启动，请下载补丁，将SYS\OEMDRIVERS目录下的和补丁包里6个文件同名的目录删掉，然后把补丁中的这6个文件放到OEMDRIVERS目录下，重新定制刷机即可解决蓝牙问题。 4, Bluetooth a patch for the problem to resolve: because of the replacement of several OEMDRIVERS MODULE, causing Bluetooth could not be activated, please download patches, SYS \ OEMDRIVERS directory and six paper bag patch of the same name deleted from the directory, and then This patch in the six files on OEMDRIVERS directory, re-custom brush Bluetooth problems can be solved. 补丁地址： OEMDRIVERS补丁，解决蓝牙问题，请点击下载！ Patch Address: OEMDRIVERS patches, Bluetooth solution, please click to download!
5、蓝牙设置－安全性那里出现了繁体中文，请下载，覆盖SYS\OEMDRIVERS下的同名文件即可。 5, Bluetooth Settings - security where there Traditional Chinese, please download, covering SYS \ OEMDRIVERS under the same name files.
6、请把OEM\Netlink_MODEMLINK\atcmdint.dll和bthatci.dll删掉，和系统中的两个MODULE是重复的。 6, the OEM \ Netlink_MODEMLINK \ atcmdint.dll and bthatci.dll deleted, and the two MODULE system is repetitive.
7、梅花6BETA2非官方皮肤版的keycode.ini让我弄错了，请去OEM\Input_plumsip6_Beta2目录下找到这个文件，用记事本打开找到： 7, the plum blossom 6 BETA2 unofficial version of the skin keycode.ini I made a mistake, go to OEM \ Input_plumsip6_Beta2 directory to find this document, we opened with Notepad to find:
## 分词（双拼中为ing） ## # # Segmentation (Shuangbing for ing) # #
[KEYDOT]
KEY = 188 KEY = 188
VALUE = , VALUE =,
HOLD = 0 HOLD = 0
应该是188，模板里的是190是错误的，请自行修改保存。 Should be 188, the 190 templates, it is wrong, please amend their own preservation.
SYS\OEMAPPS目录下的同名文件。 8, the ring can not use MIDI, Tao teachers found in the registry of the missing ring, huh, please download, covering SYS \ directory under the same name OEMAPPS document. Do not want to brush machine, download, put the phone into the registry can be.
9、6M OEM\Ziti_SimSun下的同名文件。 9,6 M of 10 lines are cross-border issues, please download the patch of water Afghanistan: covering OEM \ Ziti_SimSun document under the same name.
Input_Defaultkeyboard下的同名文件。 10, the English keyboard icon, please download the patch of water Afghanistan: coverage under the same name Input_Defaultkeyboard document.
11, want desktop plug-in "wireless network" can click on the Wireless Manager, in the registry by adding the following elements can be directly added to the oemdrivers in the RGU.
Note that this column headings and the latter point the antenna will not be able to open direct flight mode, the icon can not directly point G to open WIFI, a plenary session management for wireless links.

madds said:
Here is a google translation of the first post:
[CHT9000] world premiere 19,195 template (6.1 kernel) (available for download) ~ (plus Bluetooth patch, ring tones patch)
版本号：5.2.19195（内部版本19195.1.0.0） Version: 5.2.19195 (internal version 19195.1.0.0)
看大家都执迷于假核心，俺们也HEX了一下版本号来玩，呵呵，19195的版本号是假的，但这个核心却是真正的6.1（AKU 1.0.0）。 See everyone obsessed leave the core, the HEX俺们also play some version of, Oh, 19195, the version is false, but this is the real core 6.1 (AKU 1.0.0).
Click to expand...
Click to collapse
So absurd,
http://www.pdaviet.net/showthread.php?t=20432
is a Vietnamese website,
but the website you translated is s Chinese website.

KarhU said:
Care to share some impressions?
Xie Xie
Click to expand...
Click to collapse
i have used to but in Chinese (Lang_0804) i'm w8 for the WWE release.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[TUT][Hack]Change Product code without losing any data

Hi All
This is a tutorial for changing the phone product code and should work with Wave I/II/III
This tutorial works under 32-bit copy of Windows only
Steps:-
1.First of all download this file : http://www.mediafire.com/?yahd09ptzv3ubir
2.Extract the file with WinRAR & you will get 3 other files
a.QPST b.Revskills c.Samsung qualcomm driver
3.Grab your Wave and enter the code *#197328640#
Choose [8] Common >>>[7]Service Configuration>>>[2]DIAG Service Config.>>>[2]Usb DM/CP....Then exit this menu
4.Connect your Wave to the PC...If it asks for a Usb mode choose Usb Debugging
5.You will notice that your PC will detect a new hardware and will ask you for its driver>>>Use Samsung qualcomm driver
6.Install both QPST & Revskills
7.Use QPST to assign a COM Port for the phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8.Now open Revskills and follow the Pics
to see current product code use Display NVItem and use 2757 as item no.
to change that code you need to write new one in Hex editior
Use write NVItem and use 2757 as item no. to write the new product code
proof of product code change
9.Grab your Wave and enter the code *#197328640#
Choose [8] Common >>>[7]Service Configuration>>>[2]DIAG Service Config.>>>[3]Usb UART/AP....Then exit this menu and restart the phone
Revskills part on youtube
If anyone got any question about this please ask
Best Regards

Thank u very much, will try tomorrow. maybe this will help to get my wave back in line with samsung kies. My product code was baaxen but with flashing to 2.0 it changed to baakor and kies would not let me update. hope this will help.

kolk11 said:
Thank u very much, will try tomorrow. maybe this will help to get my wave back in line with samsung kies. My product code was baaxen but with flashing to 2.0 it changed to baakor and kies would not let me update. hope this will help.
Click to expand...
Click to collapse
i hope it works for you

Is it possible to change the product code from GT-S8500BAAXTC to SHW-M210SBAASKT which is the same product with S8530 using this method even also vice versa? Because only Samsung Apps Korea is blocked to download an apps from global models such as S8500 and S8530. Not only from global to Korean model but also Korean model cannot download an apps from other countries.
Sent from my GT-I9100 using XDA App

If the phone's IMEI is not Korean maybe you will end up with a blocked phone that can't access Samsung Apps at all
I don't recommend doing this
This tutorial is for fixing product code if it was changed by accident and not tested for other purposes
Best Regards

I think Samsung Apps doesn't check the IMEI because there was a way to download an app from UK Samsung Apps by Korean model (SHW-M210S).
Actually, it was not that technical method, it just needed fast hands and good eyes
Of course, Sammy blocked it again last week.

Didnt work (yet)
So I tried to get back in line with kies and to turnback my productcode to XEN
SO far didnt work this is what i did:
I flashed back to an old full 1.0 bada firmware version and tried to change my productcode after that. I can connect to qpst and revskill but...
Revskill gives me when I fill in Item 2757; 26
When i click check commands i get: unknown response
Maybe i should flashback to bada 2.0 after that change productcode and then go back to my old updatable dutch firmware
or am i overlooking something
Edit: changed firmware to XXJID (bada 1.2) now I get error: failed in call to write file
Will reboot everything and try again

Did you use QPST to assign the COM Port number???
Assign that number then use it with revskills
If you phone COM Port is not listed in revskills
Make sure that your PC can find your phone as a Samsung HS-USB in the device manager
Don't write command number in revskills...it gets written after pressing let's go
Watch the youtube video for more understanding
Best Regards

mylove90 said:
Did you use QPST to assign the COM Port number???
Assign that number then use it with revskills
If you phone COM Port is not listed in revskills
Make sure that your PC can find your phone as a Samsung HS-USB in the device manager
Don't write command number in revskills...it gets written after pressing let's go
Watch the youtube video for more understanding
Best Regards
Click to expand...
Click to collapse
To bad still getting error failed in call to writefile (see my edit previous post)
Going to flash back to bada 2.0 change productcode and than flash to old updatable firmware
Update; Flashed some back and forward and reinstalled revskills. Now i can see my productcode which is BAAKOR and I want it to be BAAXEN.
So what do I have to change now and where u say: to change that code you need to write new one in Hex editior. What do I have to put in where in order to change my productcode

New code in hex editor
The tutorial tells me: to change that code you need to write new one in Hex editor
How do I know what values should be filled in there to change my productcode to BAAXEN

it is 47542D533835303042414158454E
Did you manage to connect your phone finally ?!

My mistake
Yes after reinstalling revskill I managed to connect.
this afternoon I will change to BAAXEN with the info you provided
Hope this will work (btw how do you know it should be the input u suggested?)

I used PC software called HXD hex editior
Made a new text document and write string data in it in the right side and as you can see in the picture it converted string data to hex value and that is it
Best Regards

mylove90 said:
I used PC software called HXD hex editior
Made a new text document and write string data in it in the right side and as you can see in the picture it converted string data to hex value and that is it
Best Regards
Click to expand...
Click to collapse
Okee but how do u know what string data to write to change productcode to baaxen? (trying to learn / understand)

kolk11 said:
Okee but how do u know what string data to write to change productcode to baaxen? (trying to learn / understand)
Click to expand...
Click to collapse
You don't need to memorise or know what code to write.
You can use this online hexadecimal editor.
Open the link, and paste the value you wish to convert to hex.
Example, to convert GT-S8500BAAXEN.
Just copy GT-S8500BAAXEN into the upper column of the page, and press Convert.
The value 47542d533835303042414158454e will display at the bottom column.

Any idea for S8600 Product Codes? Especially for :
I've tried GT-S8600HKATPL, but this seems wrong...
Code:
GT-S8600??????
S8600BOKJ1 (SW Version)
S8600TPLKJ1 (CSC Version)
Confirmed, because downloadable
Code:
[B]GT-S8600HKAXEF[/B] (France)
S8600XXKJC (SW Version)
S8600OXAKJB (CSC Version)
See KIES/FUS...
http://forum.xda-developers.com/showpost.php?p=19085697&postcount=19
Maybe now also S7250 and S5380 online?
Best Regards

Succesfull
I managed to connect to revskills (after reinstalling twice) and updated succesfully to BAAXEN and Yes kies told me there was an update available. So now Im back in line with kies with the latest official firmware. Now waiting for samsungs update to bada 2.0 cause the beta versions were promissing!
Thank u all for help and information!

Thanx mate, posted in badablog.ru

Hello,
I have a Wave 3 S8600 that when connected to Kies in registry has the product code set to XXXXXXXXXXXXXX . I tried changing the product code in the registry but kies 2 is ignoring this it seems.
Do you know how can I change this using PST? I tried the steps described in first post but my phone doesn't have Usb DM/CP. It has:
1. USB DM []
2. UART [*]
3. USB ACM []
Upon setting the Usb DM and after that connecting to PC it doesn't do anything, QPST is not seeing any new port. According to kies registry should be on Com 13
I am using a Windows 7 32 bit.
Thanks

S8600 is only Qualcomm CPU as I know...
Which Firmware you have...
*#1234#
Btw. You could make please Screenshots from Menu... it seems little bit different...
Maybe somewhere else also to change... to have access to Qualcomm Diagnostic port...
Best Regards

SHP_CSC_FEATURE_ enable/disable

Not sure if someone has realized how funny this could be.
Example:
http://forum.xda-developers.com/showpost.php?p=21697568&postcount=13
Little overview for bada 2.0:
http://forum.xda-developers.com/showpost.php?p=21165047&postcount=190
Thanx b.kubica
On bada 1.x seems also few others... not sure...
But you can find them in apps_compressed.bin (if you decompress...)
Please.
Lets collect effect...
For instance:
SHP_CSC_FEATURE_MTP_SHOW_HIDDEN_STORAGE=1
Makes more folders visible in Explorer
http://forum.xda-developers.com/showpost.php?p=21616021&postcount=7
Thanx lbyao
IMPORTANT notice...
Please caution...
ALL CHANGES at your OWN risk.
Best Regards

adfree said:
Not sure if someone has realized how funny this could be.
Example:
http://forum.xda-developers.com/showpost.php?p=21697568&postcount=13
Little overview for bada 2.0:
http://forum.xda-developers.com/showpost.php?p=21165047&postcount=190
Thanx b.kubica
On bada 1.x seems also few others... not sure...
But you can find them in apps_compressed.bin (if you decompress...)
Please.
Lets collect effect...
For instance:
SHP_CSC_FEATURE_MTP_SHOW_HIDDEN_STORAGE=1
Makes more folders visible in Explorer
http://forum.xda-developers.com/showpost.php?p=21616021&postcount=7
Thanx lbyao
IMPORTANT notice...
Please caution...
ALL CHANGES at your OWN risk.
Best Regards
Click to expand...
Click to collapse
Already tried this feature is nice we can see all the partitions and hidden folders on the phone...

Thanks
Where We Can Write in csc ?
SHP_CSC_FEATURE_MTP_SHOW_HIDDEN_STORAGE=1

hero355 said:
Thanks
Where We Can Write in csc ?
SHP_CSC_FEATURE_MTP_SHOW_HIDDEN_STORAGE=1
Click to expand...
Click to collapse
yes in the csc in the registry file where we usually add call recorder feature

SHP_CSC_FEATURE_WIFI_DIRECT=1
I wish it worked on my Wave, but I think it won't

I've tried to add CSC_Features by this pfs
http://forum.xda-developers.com/showpost.php?p=21872365&postcount=6
but after flashing should i make a master reboot?
because i'm currently seeing nothing has changed and it doesn't show those hidden drives on my pc
but i see shpcscfeature.ini has changed

Here is a working pfs example
Remember : You need to update the file where ever it existed
i.e. : It is a registry file so it exist in 3 paths
Best Regards
SHP_CSC_FEATURE_WIFI_DIRECT=1
Click to expand...
Click to collapse
From where did you get this feature ??....Wave 3 apps_compressed.bin ??....It is not available in S8500 apps

mylove90 said:
From where did you get this feature ??....Wave 3 apps_compressed.bin ??....It is not available in S8500 apps
Click to expand...
Click to collapse
It is available for new Wave Series (Y,M,3). I think I checked in a research in badablog.ru.
When it is possible to modify apps_compressed, maybe it is possible to implement it.
Best Regards

mylove90 said:
Here is a working pfs example
Remember : You need to update the file where ever it existed
i.e. : It is a registry file so it exist in 3 paths
Best Regards
From where did you get this feature ??....Wave 3 apps_compressed.bin ??....It is not available in S8500 apps
Click to expand...
Click to collapse
Thank you it worked perfectly
but how can we make pfs files?
does it need a special app like trix or something?

You can make it with Wave Remaker or Trix (You are free to choose)
PFS can write/overwrite any file in the internal memory of the phone (Except the parts that are QMD compressed)
In debug folder there is a file where you can list files/folders to delete during PFS file flashing
Samsung use PFS for firmware updating since bada 1.0 without data loss
Doing further research won't be hard as i think
Best Regards

No flashing needed
After some tests (some try and fail attempts), here is a solution that doesn't involve flashing or losing your data. Simply use "STune", and after connecting your phone open "Registry" folder and replace "ShpCSCFeature.ini" with attached one, or you can edit it your self, copy the file on computer and add these two lines:
SHP_CSC_FEATURE_RECORD_VOICE=1
SHP_CSC_FEATURE_MTP_SHOW_HIDDEN_STORAGE=1
or just one of them, depending on what feature you want.
After editing just copy file back, replacing the existing one.
All of this has been tested on my S8500 (S8500XXLA1/S8500OXFLA2), but I believe it should work on any FW.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thank you but flashing using PFS is without dataloss and the same as stune

I know that, just wanted to give a solution that doesn't involve flashing, since many users are still afraid of using Multiloader.

mylove90 said:
You can make it with Wave Remaker or Trix (You are free to choose)
PFS can write/overwrite any file in the internal memory of the phone (Except the parts that are QMD compressed)
In debug folder there is a file where you can list files/folders to delete during PFS file flashing
Samsung use PFS for firmware updating since bada 1.0 without data loss
Doing further research won't be hard as i think
Best Regards
Click to expand...
Click to collapse
would you mind explaining about how to make a PFS using wave remarker?

Just edit the file i uploaded
Add files to it or delete files from it
About updating firmwares using PFS....it is like trying to know changes in FW
I use a Program made for PC called WinMerge...Google it
It can compare a lot of files at one click so this is how i compare dumps in FWs
An example for a FW update with PFS : http://www.sammobile.com/forum/showthread.php?t=3417
You can dumb it and explore it for better understanding
Best Regards

mylove90 said:
Just edit the file i uploaded
Add files to it or delete files from it
About updating firmwares using PFS....it is like trying to know changes in FW
I use a Program made for PC called WinMerge...Google it
It can compare a lot of files at one click so this is how i compare dumps in FWs
An example for a FW update with PFS : http://www.sammobile.com/forum/showthread.php?t=3417
You can dumb it and explore it for better understanding
Best Regards
Click to expand...
Click to collapse
Thank you so much
I'm using this firmware now
http://forum.xda-developers.com/showthread.php?t=1434833
can i use that pfs for updating to LA1?
Edit: Would you mind explaining about dumping in trix? cuz i think it cannot be done on WR and trix is not User friendly at all!!
Edit2: I succeeded dumping files but a question
what should i do with bootloader and amss.bin?
while upgrading should i flash with the new firmware bootloader?

another question
how to dump RC1 file?

r_22009 said:
Thank you so much
I'm using this firmware now
http://forum.xda-developers.com/showthread.php?t=1434833
can i use that pfs for updating to LA1?
Edit: Would you mind explaining about dumping in trix? cuz i think it cannot be done on WR and trix is not User friendly at all!!
Edit2: I succeeded dumping files but a question
what should i do with bootloader and amss.bin?
while upgrading should i flash with the new firmware bootloader?
Click to expand...
Click to collapse
PFS doesn't work alone in FW updating
You use apps_compressed.bin , New FW bootloader , New amss ,New RC1 , New RC2 , Maybe Newer CSC (Your Edited one in our case) & Your own Made PFS file
r_22009 said:
another question
how to dump RC1 file?
Click to expand...
Click to collapse
You don't need to
Now back to topic Please
Anyone Know how this feature work ? : SHP_CSC_FEATURE_BLUESTREAK
I made a little googling and i found this : http://proavmagazine.com/audiovisual-equipment/blue-streak.aspx
But after activating it i got no idea how it work
Best Regards

mylove90 said:
PFS doesn't work alone in FW updating
You use apps_compressed.bin , New FW bootloader , New amss ,New RC1 , New RC2 , Maybe Newer CSC (Your Edited one in our case) & Your own Made PFS file
You don't need to
Now back to topic Please
Anyone Know how this feature work ? : SHP_CSC_FEATURE_BLUESTREAK
I made a little googling and i found this : http://proavmagazine.com/audiovisual-equipment/blue-streak.aspx
But after activating it i got no idea how it work
Best Regards
Click to expand...
Click to collapse
I've merged ffs,csc,shpapp in one PFS file
For directly upgrade from 1.2 to bada 2
I'll share the result
EDIT:
a little question
which one is correct for PfsDeleteList.txt
/appex/blah blah
or \appex\blah blah?

/appex/blablabla is the right way
Best Regards

About SHW-M410K Flash

Sorry For Interupting.
I'm Having Problem With SHW-M410K Firmware.
It is not Full, but able to Part Flash.
However I had a problem
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Click to expand...
Click to collapse
I've Got Mr. Adfree's Reply
I can confirm M410K nor M410S apps_compressed.bin work in XXLD1 S8600 Firmware.
So again Question.
Boot changed??
Did you used Bootfiles from S8600 ?
Thanx.
Best Regards
Click to expand...
Click to collapse
I'm confused with reply. You mean that Wave 3 which has XXLD1 can assume SHW-M410K Firmware?

Hello.
We have same result.
NO sucess with flashing apps_compressed.bin from M410K or M410S.
Code:
Download Start Ch[0]
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Other user tested... same result:
http://www.handy-faq.de/forum/samsu...fragen_diskussion_firmware-7.html#post2288269
Die apps_compressed.bin lässt sich im übrigen bei beiden Firmwares nicht flashen.
Click to expand...
Click to collapse
Short translation:
NO apps_compressed working from M410S nor M410K
:crying:
Only reason for not working is M410K and M410S need Bootfiles.
So I think you have now Bootfiles from XXLD1 on your M410K ?
Is this correct ?
Best Regards

adfree said:
Hello.
We have same result.
NO sucess with flashing apps_compressed.bin from M410K or M410S.
Code:
Download Start Ch[0]
ERR : NAK_BAD_SEC_CODE 0
Error : Apps Write [0.2s]
Other user tested... same result:
http://www.handy-faq.de/forum/samsu...fragen_diskussion_firmware-7.html#post2288269
Short translation:
NO apps_compressed working from M410S nor M410K
:crying:
Only reason for not working is M410K and M410S need Bootfiles.
So I think you have now Bootfiles from XXLD1 on your M410K ?
Is this correct ?
Best Regards
Click to expand...
Click to collapse
Nope.
I've saw your posts(about XXLD1) carefully at yesterday.
So I was founding XXLD1 INCLUDING Bootfiles from yesterday.
However... I can't find firmware that including Bootfiles.
In Sam Mobile, I can't find Firmware INCLUDING Bootfiles, there are only excluding BootFiles
And, I'm unavailable to access Check Fus Downloader.
(Whether GUI, Non-GUI)
Can Help Me :crying:
(I'm tired of waiting HotFile 20 minutes. Uh)
/Current State
S8600XXKJC ->Turko CFW V2->S8600XXKJC(Currently Flashed)

/Current State
S8600XXKJC ->Turko CFW V2->S8600XXKJC(Currently Flashed)
Click to expand...
Click to collapse
XXKJC has folder BOOTFILES
Contain these files:
Code:
appsboot.mbn
dbl.bin
osbl.bin
partition.bin
We need these files for M410K and/or M410S...
Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
3.
Sorry, I was long time not on Sam...
Sorry For Late Reply
Yes I used S8600XXKJC bootfiles for emergence flashing..
Then.. It doesn't Work?
Thanks.
Click to expand...
Click to collapse
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...

For Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
Click to expand...
Click to collapse
You mean decrypt the LF2 apps_compressed.bin and then change last 1024 bytes, and encrypt, flash? Right?
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
Click to expand...
Click to collapse
You mean downloading firmware with S/N don't you? However, I'm unable to decrypt any files. There is only M410KLF2. No .tar or .zip.
Want files?
3.
Sorry, I was long time not on Sam...
Click to expand...
Click to collapse
It's OK. I thank you You gave me hope.
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...
Click to expand...
Click to collapse
Too Bad Even I had no chance to work with it.

You mean decrypt the LF2 apps_compressed.bin and then change last 1024 bytes, and encrypt, flash? Right?
Click to expand...
Click to collapse
Yes. But this could be not so easy...
I will ask some user to test it... as I can't do this without S8600...
Best Regards

adfree said:
XXKJC has folder BOOTFILES
Contain these files:
Code:
appsboot.mbn
dbl.bin
osbl.bin
partition.bin
We need these files for M410K and/or M410S...
Other ideas...
1.
Last 1024 Bytes from apps_compressed.bin...
Decrypt
replace last 1024 Bytes... from XXLD1 for instance...
Encrypt...
I can NOT try yet, because my S8600 is at Repair Service...
2.
Maybe Kies can restore M410K Original state...
http://forum.xda-developers.com/showpost.php?p=34037278&postcount=303
Now newer Version of Kies... not tested again.
3.
Sorry, I was long time not on Sam...
4.
I will write PM...
Thanx in advance.
Best Regards
P.S.:
http://forum.xda-developers.com/showpost.php?p=35097338&postcount=335
CheckFusDownloader "Offline" for now...
Samsung increased Security...
Click to expand...
Click to collapse
I wish good result, I'll wait for your result post.
FOR REAL
BEST REGARDS

adfree just you can tell what can I do

http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2357346
I have asked Gunter33, maybe he could try... as he has S8600 for test.
Best Regards

I don't Know This File? What's this?
I copied form :
Code:
C:\Users\User Name*\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR
http://goo.gl/q7I2k
And.. It is Only 136mb. And No .zip or .tar
http://goo.gl/FcjXu
http://goo.gl/WTc4Z
Other that is Decrypted Or Non-Decrypted are about 200mb.
Some How, I thought It is FAKE Files.
But In Kies,(I mean I downloaded with S/N)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Meaning :
Code:
Predownloading firmware for SHW-M410K succeeded.
Please confirm your model, and click here to upgrade.
In addition.. My Kies Hates My SHW-M410K.:crying:
Code:
No Reset For GT-S8600

KRLF2KTFLF2
First 140 MB is ZIP but not complete...
Will download file 2 and 3...
But it looks it is what we have, without Bootfiles...
About playing with apps_compressed.bin and last 1024 Bytes...
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2358591
and
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2358960
Code:
Download Start Ch[0]
Apps 29622.3KB OK[43.5s]
Error : CMD_USB_LOCK fail
Will check later...
Best Regards

Little progress...
http://www.handy-faq.de/forum/samsu...custom_roms_fuer_wave_3_a-13.html#post2359107
Maybe if we combine TriX Script...
DisableBadaIntegrity_v0.23.zip and/or
DisableBadaIntegrity_v0.24.zip
http://forum.xda-developers.com/showpost.php?p=34287581&postcount=249
I have "forgotten" if CheckAppIntegrity is the mandatory part...
Best Regards

If combining DisableBadaIntegrity,
can be able to run apps_compressed on GT-S8600?
CheckAppIntegrity not found (skippinG)
If there is any program that extracts firmware from phone, I will be delighted because
my father is pure bada2.0M410KKRLF2. But It is just a dream..isn't it? Impossible.

If there is any program that extracts firmware from phone
Click to expand...
Click to collapse
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
2.
JTAG Hardware like RIFF Box for instance...
http://forum.xda-developers.com/showpost.php?p=35626872&postcount=88
If you follow Link you can find Fulldump of S8600
SAMSUNG_GTS8600_FullFlash.bin.rar
BUT this is hard to extract files and make them Multiloader compatible...
3.
Why not go Service Point or to your Provider/Operator or Shop/Saler where you buy M410K...
Best Regards

adfree said:
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
2.
JTAG Hardware like RIFF Box for instance...
http://forum.xda-developers.com/showpost.php?p=35626872&postcount=88
If you follow Link you can find Fulldump of S8600
SAMSUNG_GTS8600_FullFlash.bin.rar
BUT this is hard to extract files and make them Multiloader compatible...
Click to expand...
Click to collapse
Will be attempted Today.
3.
Why not go Service Point or to your Provider/Operator or Shop/Saler where you buy M410K...
Click to expand...
Click to collapse
The reason why I needed firmware was to Flash my phone to original state. Yes. It can be fast.
It can be better to go Service.. But I have no time now. I have to go School Dormitory for Study start from 1, January.
Only having about 3 days.
I will attempt 2 ways that you gave, on 3days, and have 3 years good bye after.
Best Regards.

adfree said:
It is not impossible, but NOT much easier...
1.
bTerm for instance...
http://forum.xda-developers.com/showthread.php?t=1298950
But only tested/confirmed for S8500... because FOTA file...
Click to expand...
Click to collapse
Having Problem
bTerm : Able to Open
-> Check : Not Connected?

Having Problem
bTerm : Able to Open
-> Check : Not Connected?
Click to expand...
Click to collapse
Sorry.
But only tested/confirmed for S8500... because FOTA file...
Click to expand...
Click to collapse
Only in theory...
Not tested, because not enough S8600 User nor M410K or M410S User.
Sorry.
In 1 year I have seen maybe 10 S8600 user.
0 M410S User
You are the ONLY User I know with M410K...
I have tried really many things.
http://forum.gsmhosting.com/vbb/f352/korean-bada-handsets-1443940/
http://developer.bada.com/badaforum...neral-1&messageId=45758&startPage=1&curPage=1
You can see how many answers I got...
Sorry.
Best Regards

After several hours because Kies Server for this was yesterday offline...
I was able to Download few S8600 Firmware via Serial Number and also M410K Firmware...
I can confirm your KRLF2KTFLF2 for ENC3.tar is identical what I have...
1:1 same file... under Win7
...\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR\KRLF2KTFLF2
File is ZIP and contain encrypted *.enc3 files... but it is NO FULL nor Bootfiles included...
Same with S8600 files I have now...
So this is what we know from CheckFusDownloader allready...
So Kies is no help.
Best Regards

adfree said:
After several hours because Kies Server for this was yesterday offline...
I was able to Download few S8600 Firmware via Serial Number and also M410K Firmware...
I can confirm your KRLF2KTFLF2 for ENC3.tar is identical what I have...
1:1 same file... under Win7
...\AppData\Local\Temp\Binary\SHW-M410K\KTF\KR\KRLF2KTFLF2
File is ZIP and contain encrypted *.enc3 files... but it is NO FULL nor Bootfiles included...
Same with S8600 files I have now...
So this is what we know from CheckFusDownloader allready...
So Kies is no help.
Best Regards
Click to expand...
Click to collapse
Meaning :
1. bTerm is only tested on S8500. So Less Possibe for S8600. Can Open but Error in Check.
2. No hope On Kies. Exact Firmware as we got. No For First(that includes OSP application files+BOOTFILES) Firmware.
3. Full Flash Bin needs progress. Less Possible.
There are many people on Korea Using SHW-M410K or S but not interested at all.
I think this is the final result ; can't find. Unabled.
I have to just use; S8600XXLD1. Bootfiles Found. But you was right. APPS_COMPRESSED.BIN IS only for SHW-M410K BOOTFILES.
Thank you for any help.
I think I have to wait for Tizen Development OR Badadroid Development On Wave3.
Or someday..will find..

There are many people on Korea Using SHW-M410K or S but not interested at all.
Click to expand...
Click to collapse
1.
Higher chance if advanced korean user with M410K and RIFF Box (JTAG) for instance...
http://forum.gsmhosting.com/vbb/f634/korean-handset-shw-xxxx-1591087/#post9062492
I have created new request, but less/low chance...
If I search for M201S or M410x nearly no posts...
2.
Maybe some friendly M410K Tester leak Bootfiles...
Low Chance...
3.
About reading Bootfiles from handset WITHOUT Hardware...
bTerm is not the only Tool...
Problem is to find the correct Tool + procedure to use...
We will see what happens in 2013...
But not count on Tizen...
For Android Porting FOTA Modificaton is missing... and as you can see.
For S8600 no ELF files leaked for "easier" Reverse Engineering...
So not expect in near future Android for S8600... nor M410x...
See here:
http://forum.xda-developers.com/showthread.php?t=1020444
Request for Boot ELFs unanswered/unsolved yet...
http://forum.xda-developers.com/showpost.php?p=32426571&postcount=68
So FOTA Developement is slow down for S8600...
Don't forget the Hardcore Display Settings... and other different Hardware...
Anyway.
We will see what happens... in 2013...
Best Regards

Help unlock huawei HWD14

no way to putt NCK , no information on internet , Putty erro, DC unlocker not support .if found NCK how do i use that ? firmware update?? but where? this is real challenging for me
tks
ATI
Manufacturer: Huawei Technologies Co., Ltd.
Model: HWD14
Revision: 11.232.03.10.824
IMEI: 3528980453****
+GCAP: +CGSM
OK
AT^NVRDEX=50503,0,128
ERROR

Anandasri2 said:
no way to putt NCK , no information on internet , Putty erro, DC unlocker not support .if found NCK how do i use that ? firmware update?? but where? this is real challenging for me
tks
ATI
Manufacturer: Huawei Technologies Co., Ltd.
Model: HWD14
Revision: 11.232.03.10.824
IMEI: 3528980453****
+GCAP: +CGSM
OK
AT^NVRDEX=50503,0,128
ERROR
Click to expand...
Click to collapse
Found modem : M9625E-1
Model : Huawei HWD15
IMEI : 352898045xxxxxx
Serial NR. : N7SDW1431700xxxx
Firmware : 11.232.03.10.824
Dashboard version : 22.001.26.06.824
SIM Lock status : Locked (Card lock)
Wrong codes entered : 0 (unlock attempts left : 10)
sorry, this modem not supported !

Anandasri2 said:
Found modem : M9625E-1
DC unlocker
Model : Huawei HWD15
IMEI : 352898045xxxxxx
Serial NR. : N7SDW1431700xxxx
Firmware : 11.232.03.10.824
Dashboard version : 22.001.26.06.824
SIM Lock status : Locked (Card lock)
Wrong codes entered : 0 (unlock attempts left : 10)
sorry, this modem not supported !
Click to expand...
Click to collapse
CardLock_UnLock-e58xx/HUAWEI MODEM Code Writer not working ether for NCK enter may be Firmware block ..!

Anandasri2 said:
CardLock_UnLock-e58xx/HUAWEI MODEM Code Writer not working ether for NCK enter may be Firmware block ..!
Click to expand...
Click to collapse
only firmware online is "easy-firmware" looks scam to me cuss it's paid and suspicious .
HWD14_11.232.03.30.824_22.001.26.06.824
HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip
Date: 26-09-2018  | Size: 270.65 MB
found something working but got error
"CardLock_UnLock-e58xx " code writer detect this device but when enter NCK its got error, may be due to firmware block
For NCK used old V1 algo cuss imei# start we 35XXXXXXXXXXX
but non of attempts count according to DC unlocker still remain 10 chances
if not found any solution soon i will try to update it by Web UI built in using auto update, but still hesitate to do cuss it may more difficult to unlock
*i tried using puty telnet /Serial commands but no success
++++++++++++++++++++++++++++++++++++++++
1.at^sfm=1
2.at^reset
3.AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
4.at^sfm=0
5.at^reset
+++++++++++++++++++++++++++++++++++
atc ati
atc at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0,a,0,0,0
+++++++++++++++++++++++++++++++++++=
ATI
ATI
AT^NVRDEX=50503,0,128
++++++++++++++++++++++++++++++++++++
if i found any progress i will update , also if some one can help much appreciate...!:angel:
tks,

Anandasri2 said:
only firmware online is "easy-firmware" looks scam to me cuss it's paid and suspicious .
HWD14_11.232.03.30.824_22.001.26.06.824
HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip
Date: 26-09-2018  | Size: 270.65 MB
found something working but got error
"CardLock_UnLock-e58xx " code writer detect this device but when enter NCK its got error, may be due to firmware block
For NCK used old V1 algo cuss imei# start we 35XXXXXXXXXXX
but non of attempts count according to DC unlocker still remain 10 chances
if not found any solution soon i will try to update it by Web UI built in using auto update, but still hesitate to do cuss it may more difficult to unlock
*i tried using puty telnet /Serial commands but no success
++++++++++++++++++++++++++++++++++++++++
1.at^sfm=1
2.at^reset
3.AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
4.at^sfm=0
5.at^reset
+++++++++++++++++++++++++++++++++++
atc ati
atc at^nvwrex=8268,0,12,1,0,0,0,2,0,0,0,a,0,0,0
+++++++++++++++++++++++++++++++++++=
ATI
ATI
AT^NVRDEX=50503,0,128
++++++++++++++++++++++++++++++++++++
if i found any progress i will update , also if some one can help much appreciate...!:angel:
tks,
Click to expand...
Click to collapse
working this command
but
ATI
> AT ^ CARDLOCK?
^ CARDLOCK: 1,10,0
when enter
AT ^ CARDLOCK = "Xx NCK CodeXXX" nothings happen so i realize this is firmware block ...
so i have to find modified firmware for do this so if any one have access to easy-firmware. com resource and get "HWD14_11.232.03.30.824_22.001.26.06.824 HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip" pls share with me : so at least give a try ..

Anandasri2 said:
working this command
but
ATI
> AT ^ CARDLOCK?
^ CARDLOCK: 1,10,0
when enter
AT ^ CARDLOCK = "Xx NCK CodeXXX" nothings happen so i realize this is firmware block ...
so i have to find modified firmware for do this so if any one have access to easy-firmware. com resource and get "HWD14_11.232.03.30.824_22.001.26.06.824 HWD14TCPU-V100R001B232D03SP30C824_Firmware_05012FPY.zip" pls share with me : so at least give a try ..
Click to expand...
Click to collapse
+++++++++++++++++++++ DAY 5 ++++++++++++++++++++++++++++
finally found way to download original Firmware , with all revision
HWD14_UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP English/Japanese
HWD14_UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP English/Japanese
bit of research i realize ZIP is a compressed bin file, not a compressed package.. also i know nothing abut these files so i have to dig more to learn how to handle those file may it's impossible but still i don't
know :laugh:
now i have
*firmware file
*Hi links drivers to enable COM port

Anandasri2 said:
+++++++++++++++++++++ DAY 5 ++++++++++++++++++++++++++++
finally found way to download original Firmware , with all revision
HWD14_UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP English/Japanese
HWD14_UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP English/Japanese
bit of research i realize ZIP is a compressed bin file, not a compressed package.. also i know nothing abut these files so i have to dig more to learn how to handle those file may it's impossible but still i don't
know :laugh:
now i have
*firmware file
*Hi links drivers to enable COM port
Click to expand...
Click to collapse
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
working with some tools in linux (binwalk... ect ) but still no luck if some one can mod this firmware pls let me know i will send the link ... cuss it's long way to go learn Reverse Engineering :silly:

Anandasri2 said:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
working with some tools in linux (binwalk... ect ) but still no luck if some one can mod this firmware pls let me know i will send the link ... cuss it's long way to go learn Reverse Engineering :silly:
Click to expand...
Click to collapse
FM file links
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP

Anandasri2 said:
FM file links
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.10.824_22.001.26.06.824.ZIP
http://update.hicloud.com:8180/TDS/..._UPDATE_11.232.03.30.824_22.001.26.06.824.ZIP
Click to expand...
Click to collapse
doesn't work because the file is corrupted looks like it's faking about corrupt cuss looks suspicious to me ,i think archive is good but they don't need open it easily:laugh: still looking forward
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Anandasri2 said:
doesn't work because the file is corrupted looks like it's faking about corrupt cuss looks suspicious to me ,i think archive is good but they don't need open it easily:laugh: still looking forward
Click to expand...
Click to collapse